check box use the temporary Interface as a derived Table

Similar Questions

• To access the check boxes in the user interface programmatically

  Hi all
  I have the following usecase.
  1. I have a table that has 3 columns, first two columns are read only output of the label component and the third column is a checkbox.
  2. I have three lines in the table.
  
  Now:
  1. when a user selects the check box and click on a "submit" button I want to check that it should have selected at least one checkbox.
  2. for which I tried to access the table from the user interface programmatically, but it does not work.
  Is there a way I can access the values?
  
  Thanks in advance,

  Hello

  The box must be bound to an attribute line in the table is related to data collection. If yes then simply loop through the lines and check if the attribute has been set. For example, if each line has a "checked" property, so you can ensure at least a line "checked = true' in your action. To access the collection, you can use something like:

  Object initialRowKey = table.getRowKey();
  try
  {
      int count = table.getRowCount();
      for (int i = 0; i < count; i++)
      {
          table.setRowIndex(i);
          MyObject row = (MyObject)table.getRowData();
          if (row.isChecked())
          {
              // do something, set a flag to true, etc.
          }
      }
  }
  finally
  {
      table.setRowKey(initialRowKey);
  }
  

  The code above assume that you linked the table to your managed bean using the "required" attribute in the table.

  Kind regards

  ~ Simon

• Is a database table that is required for the temporary interfaces with the data flat file source?

  People, this is the situation I ODI 11.1.1.7

  1. I have an interface temporary (yellow), called MJ_TEMP_INT, which uses data from TWO sets of data from the source in a temporary target (TEMP_TARG). Wrestling is a shot of a data set from a table while the other set of data extracted from a flat file.  A union is made on data sets.
  2. I then create another interface, called MJ_INT, which uses the MJ_TEMP_INT as the source and the target is a real database. table called "REAL_TARGET".

  Two questions:

  1. When I run my second interface (MJ_INT), I get a message "ORA-00942: table or view does not exist" because it is looking for a real TEMP_TARG db table. Why I have to have one? because I am pulling a flat file?
  2. On my second interface (MJ_INT) when I look at the interface of my source MJ_TEMP_INT (yellow) property sheet, the box 'Use the temporary interface as a Derived table' is DISABLED.  Why? Is also because my temporary interface is pulling from a flat file?

  I am attaching a file that shows a screenshot of my studio ODI.

  Furthermore, IF my temporary source interface has only a single set of data by pulling from a database. Table to table in a temporary target, called MJ_TEMP2_TARG, and then when I use this temporary interface as a source to the other another real db. target table (REAL2_TARGET), THEN everything works.  ODI requires me to have a real database. Table MJ_TEMP2_TARG and the checkbox for "interface temporary use as a Derived table" is NOT DISABLED and my REAL2_TARGET table gets filled.

  Thank you in advance.

  Mr. Jamal.

  You quite rightly assume the reasons that you have questions is because you try to attach a file. A file I always have to be materialized in the transit zone, as a temporary table and then have the data loaded in it.

• Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions removed. Check with many types of malware scanners.

  Firefox crashes in typing or by clicking check box or the radio button, even with all the plugins / extensions disabled, then deleted. Sometimes it hangs for five minutes. I checked the PC with several types of scanners of evil-ware, but none to be found. All hidden and deleted cookies, all DELETED & extension plugins. Remove all instances of Firefox PC and registry, then restored to bookmarks. The only thing that I did not is to remove and reinstall not my favorites.
  Windows Vista (yes I know) and FF 13.0.1

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/
  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers
  • http://KB.mozillazine.org/Firefox_hangs
  • https://support.Mozilla.org/KB/Firefox+hangs

• Aironet 1240AG - cannot use the web interface

  I'm trying to set up a new Aironet 1240AG. After that she won an IP from the DHCP in my LAN, I can always connect using the web interface. I use an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find the server. Please I need help

  Hi Olivier,.

  First off you're welcome :) This method really works without the need for a WLC, be patient. Check the address static IP put you on your TFTP (* range 10.0.0.2 to 10.0.0.30)

  Rename the access point image file in the folder of the server TFTP c1200-k9w7 - tar.default for a series of 1200 access point

  Looks like a problem TFTP (no firewall on your PC?)

  Take a look at the details in the following threads that each has to do with TFTP. There are some great tips to troubleshoot TFTP some of my NetPros favorite ScottMac, Cisco's Stephen and Jack Young. The likely culprit may be you need to uncheck "Hide extensions for known file types" on your server TFTP;

  http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc042b/8#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc03c4/2#selected_message

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddbf271

  I hope this helps! Good luck!

  Rob

  Remember messages useful rate...

• Clear the check box in the new if invalid table line

  Hi all.

  I use JDev version 11.1.2.4.0.

  I have a table with 2 columns, which one of them is a checkbox. I want to clear this check box if the user inserts a newline invalid. So far, I have an EL expression in my field to disable: disabled = "#{viewScope.viewBean.disable}", where a Boolean variable disable is. "

  I put the variable Boolean true when the user inserts a line not valid, but I am not able to update the fields. The only way I can do this is to update the entire table, but then I lose the filters.

  For example, I want to do something like this:

  I have a VO employed with the salary attribute where the user can search/insert/update / delete. The user searches for all employees with > 30 k salary. Then, the user inserts a new employee, but he or she inserts one that's already in the DB. So, the line is not valid. I want to disable the all check box in my table WITHOUT losing the > 30 k search salary. If I update the entire table, the search has disappeared and all employees are shown.

  Any ideas?

  Edit: I also tried this approach, but I had the same problem with a refreshing existing lines: https://udayarocks.wordpress.com/2011/07/30/how-to-conditionally-enable-disable-the-column-contents-in-the-adf-11g-table...

  The transitional value will remain if it is added to the OS, not the VO.

  Timo

• If else check box in the table does not properly

  I'm new to this forum and hope someone can help me with that.

  I created a dynamic array and I have 2 types of boxes.

  One is a check box for the individual lines that fills a value in a cell. Otherwise, it will be zero.

  Another is a master checkbox that activates the check all lines and value box

  Problem statement:

  When I click on the master check box, every individual is selected. However, the value of the cell is incorrect. Value of all the rows is based on the value of the first row.

  Here is my code:

  Master Checkbox (using the formcal in click):

  If (CheckBoxAll == "1") then

  Table.Row1 [*]. CheckBox1 = "1";

  Table.Row1 [*]. Cell4 = table.row1 [*]. Cell2;

  on the other

  Table.Row1 [*]. CheckBox1 = '0 '.

  Table.Row1 [*]. Cell4 = 0;

  endif

  Check box for the individual line (using the formcal in click):

  If (CheckBox1 == "1") then

  Cell4 = Cell2

  on the other

  Cell4 = 0

  endif

  Otherwise, I tried to turn the master value of the box fill off & put a validation in each line instead. This time it works! but it kept prompting a message for each rows whenever I unchecked the box: "the value of Checkbox1 is not valid.

  Here is my code:

  Master Checkbox (using the formcal in click):

  If (CheckBoxAll == "1") then

  Table.Row1 [*]. CheckBox1 = "1";

  on the other

  Table.Row1 [*]. CheckBox1 = '0 '.

  endif

  Check box for the individual line (using the formcal to validate the event):

  If (CheckBox1 == "1") then

  Cell4 = Cell2

  on the other

  Cell4 = 0

  endif

  Appreciate all the help that I am at a loss as to why the tis error occurs and how to solve it.

  Thank you!

  Hello world

  I managed to find a solution to my problem. I write for the benefit of any1 facing the similar problem.

  I changed formcal to Javascript.

  Master box (Click event):

  vRows var = Table._Row1.count;

  for (var i = 0; i)

  {

  If (this.) RawValue is "1")

  {

  xfa.resolveNode ("Table.Row1 [" + i + "]"). CheckBox1.rawValue = "1";

  xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell4.RawValue = xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell2.RawValue;

  }

  on the other

  {

  xfa.resolveNode ("Table.Row1 [" + i + "]"). CheckBox1.rawValue = "0";

  xfa.resolveNode ("Table.Row1 [" + i + "]"). Cell4.RawValue = 0;

  }

  }

  Another point to note, it only works for the table of data binding. If the row in the table has been created original, somehow the Table._Row1.count does not work. It detects that the value = 1.

  Thanks to all who tried to help me!

• Select the check box for the table of the ADF

  Hi all
  
  I want to add the check box in front of each line. The user will select the row by clicking the box and going to treatment by clicking on a button.
  
  I just almost all possible discussions on OTN.
  
  What I've done so now
  1] added a transitional Boolean attribute in my VO. added as a selectBooleanCheckbox in .jspx page.
  [2] a button with backing bean that will do the processing. [He will pick up the attributes of all ranks and be written in a file]
  [* 3] it works fine if I use the default option of line by Ctel selection + A, or by pressing Ctrl + click or SHIFT + arrow key. Backing bean is not the issue.*
  [4] try to intercept the TableSelection Listner also.
  
  It comes
  
  When I select the check box, only the last selected line is processed and not all lines. How to make the selectable online by clicking on the checkbox.
  
  I use JDeveloper 11.1.1.5
  
  Refered links
  http://www.gebs.ro/blog/Oracle/Oracle-ADF-row-selection-using-checkboxes/
  http://technology.AMIS.nl/2010/07/29/ADF-11g-select-all-rows-in-an-ADF-table/
  http://Sameh-Nassar.blogspot.nl/2009/12/use-checkbox-for-selecting-multiple.html
  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/99-checkbox-for-delete-in-table-1539659.PDF
  
  Mukesh.

  https://www.dropbox.com/s/1gqsaobgyjycie6/AddDeleteEmployees.rar
  

• Loading multiple files using the same interface in ODI

  Hi all
  
  We load multiple files using the same interface and get the error "java.sql.SQLException: ORA-00942: table or view does not exist" while inserting record in the staging table. It looks like the same temporary table is used when loading multiple files and the error. Grateful if someone offers a solution to avoid this error.
  We use the following KMS:
  
  (1) LKM SQL file
  (2) IKM Oracle SQL COMMAND append.
  
  Receive a quick response.
  
  Thank you
  RP

  Hello

  See this http://odiexperts.com/interface-parallel-execution-a-new-solution

  Thank you
  Fati

• value of the check box in the insert statement

  I'm hand-coding an insert from the insert record sb construction will do for this application. The values of several form elements are inserted into the fields in the table. The problem that occur is a checkbox value in the form. If the box is checked, all is well and the value is 'True' inserted in the appropriate database field. However, if the checkbox is not checked I get syntax error message. The reason being that, while are passed on to the fields with null null, the checkbox is not transmitted at all. This is evident when changing the method of the form to 'Get' for testing purposes. There is no reference to this field check box in the query string.
  
  My assumption is that this would require an If statement changing the value of the 'False' check box when the box is blocked. How I would go to this topic. With my knowledge limited to the ASP, I wrote the following, but it doesn't seem to work:
  
  < input name = "emailprob_mor" type = "checkbox" id = "emailprob_mor" value = "< % If Not (IsNull (Request.Form ("emailprob_cus")) then Response.Write"True") Else Response.Write ("False") End If % >" >

  When you use the boxes, it is better to separate your Request.Form statement and your insert statement:

  cbVal = '0 '.
  If (Request.Form ("emailprob_mor") <> "") then cbVal = Request.Form ("emailprob_mor")

  Then in your SQL statement:

  "& cbVal &"..."

  For your real HTML:

  "" ) then response.write(" checked='checked' ") %>>

  It is true that if the user does not check the box, then it appears as if there is no when it is submitted, that is the reason why he must be given a default value when the record is inserted.

• Conditionally Enable and Disable select any check box in the report position only?

  4.2.1

  THM: 2

  Hello

  I have a classic report with an apex_item.checkbox2 as the first column. I also had to add a "Select all" check box in the header. I did it by adding this to the column header

  < input type = "checkbox" onclick = "$f_CheckFirstColumn (this)" / > "

  However, there is a requirement where in I need to disable this "topic" check all (line remain) when a certain field is not filled.

  For example: P2_fLAG which is a page element is null, then select it title all the checkbox should be disabled.

  Is this possible?

  Thank you

  Ryan

  ryansun wrote:

  This bump. Wondering if anyone has done this before?

  A took a look yesterday. May have the time to finish today.

  In this page if F1 and F2 are null and the user has selected "Select all" and click on the button. A message to standard error or alert apex must be indicated, asking the user to fill something in the fields F1 or F2.

  I think that the idea first of activation and deactivation of select box everything is the best approach. Always better to prevent the user from doing something than to allow them to do it and then tell them they can't.

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• In Camera Raw 8.4.1 I can open the DNG for 3 years, but it's using the old interface and features not the current - how can I change this. Rebuilt the cache.

  Creative cloud running on a HP with 18 GB of Ram - I'm working on a project using DNG 3 years old and when I open in my current Camera Raw, it uses the old interface with 'contrast' down and "valorisation" below 'exposure' - How do Camera Raw to open with the current interface?

  Thanks for any help.

  Craig

  If you are referring to the version of process , you who set the ACR camera Calibration tab.

  

  Also remember that all images with previous settings will show the process used when they were stopped.  Which can also be changed in this tab.

• Is it possible to add a hard drive to a VM running via a script or a program without using the user interface

  I'll try to ask this question clearly, but I ask that read you it carefully, because I can't do a great job of setting out clearly what I'm looking for.

  I know how to create a virtual disk in a batch file or a script.  I know how to have a running virtual machine to detect a newly added hard drive and format it in Linux, BACK, and NetWare. I do not have scripted this part, but I did it manually by adding records via the UI and then by doing the steps manually to make the operating system to detect and format the newly added drive. In each case, these steps are scriptable with the exception of the addition of the drive in the user interface.

  The only way I know to add a new hard disk to a virtual computer running is through the user interface. I don't know in a way that can contain script (for example vmrun or an API call) to make.

  I guess that maybe I can have the virtual machine to go into sleep mode and then add the HDD in the vmx file while the machine is in standby mode, then put the computer to sleep mode, although I have not tested this.

  My question is, ' can a virtual drive be added to a virtual machine running without using the user interface and without put the machine to sleep, or in other words in a script any?

  Have you tried VI SDK?

• How to enter text in the text entry box using the virtual keyboard in a flex application

  Re: How to enter text in the text entry box using the virtual keyboard in a flex application

  Hello

  I'm using flash builder 4.

  I designed the virtual keyboard, I have to update the text in the input text permanently area using the virtual keyboard.

  I used the events.i button does a few he's cheating.

  can someone help me tat.

  Thanks in advance.

  I have included my mxml with this program.

  virtualKeyboard. MXML

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx" minWidth = minHeight = "955" "600" creationComplete = "initfunc ()" >
  < fx:Script >
  <! [CDATA]
  Import mx.controls.Alert;
  private function initfunc (): void
  {
  B1.addEventListener (MouseEvent.Click, HandleEvent);
  B2.addEventListener (MouseEvent.Click, HandleEvent);
  B3.addEventListener (MouseEvent.Click, HandleEvent);
  B4.addEventListener (MouseEvent.Click, HandleEvent);
  B5.addEventListener (MouseEvent.Click, HandleEvent);
  B6.addEventListener (MouseEvent.Click, HandleEvent);
  B7.addEventListener (MouseEvent.Click, HandleEvent);
  B8.addEventListener (MouseEvent.Click, HandleEvent);
  B9.addEventListener (MouseEvent.Click, HandleEvent);
  B10.addEventListener (MouseEvent.Click, HandleEvent);
  B11.addEventListener (MouseEvent.Click, HandleEvent);
  B12.addEventListener (MouseEvent.Click, HandleEvent);
  B13.addEventListener (MouseEvent.Click, HandleEvent);
  B14.addEventListener (MouseEvent.Click, HandleEvent);
  B15.addEventListener (MouseEvent.Click, HandleEvent);
  B16.addEventListener (MouseEvent.Click, HandleEvent);
  B17.addEventListener (MouseEvent.Click, HandleEvent);
  B18.addEventListener (MouseEvent.Click, HandleEvent);
  B19.addEventListener (MouseEvent.Click, HandleEvent);

  
  B20.addEventListener (MouseEvent.Click, HandleEvent);
  B21.addEventListener (MouseEvent.Click, HandleEvent);
  B22.addEventListener (MouseEvent.Click, HandleEvent);
  B23.addEventListener (MouseEvent.Click, HandleEvent);
  B24.addEventListener (MouseEvent.Click, HandleEvent);
  B25.addEventListener (MouseEvent.Click, HandleEvent);
  B26.addEventListener (MouseEvent.Click, HandleEvent);
  B27.addEventListener (MouseEvent.Click, HandleEvent);
  B28.addEventListener (MouseEvent.Click, HandleEvent);
  B29.addEventListener (MouseEvent.Click, HandleEvent);
  B30.addEventListener (MouseEvent.Click, HandleEvent);
  B31.addEventListener (MouseEvent.Click, HandleEvent);
  B32.addEventListener (MouseEvent.Click, HandleEvent);
  B33.addEventListener (MouseEvent.Click, HandleEvent);
  B34.addEventListener (MouseEvent.Click, HandleEvent);
  B35.addEventListener (MouseEvent.Click, HandleEvent);
  B36.addEventListener (MouseEvent.Click, HandleEvent);
  B37.addEventListener (MouseEvent.Click, HandleEvent);
  B38.addEventListener (MouseEvent.Click, HandleEvent);
  B39.addEventListener (MouseEvent.Click, HandleEvent);
  B40.addEventListener (MouseEvent.Click, HandleEvent);
  B41.addEventListener (MouseEvent.Click, HandleEvent);
  B42.addEventListener (MouseEvent.Click, HandleEvent);
  B43.addEventListener (MouseEvent.Click, HandleEvent);
  B44.addEventListener (MouseEvent.Click, HandleEvent);
  B45.addEventListener (MouseEvent.Click, HandleEvent);
  B46.addEventListener (MouseEvent.Click, HandleEvent);
  B47.addEventListener (MouseEvent.Click, HandleEvent);
  B48.addEventListener (MouseEvent.Click, HandleEvent);
  B49.addEventListener (MouseEvent.Click, HandleEvent);
  B50.addEventListener (MouseEvent.Click, HandleEvent);
  B51.addEventListener (MouseEvent.Click, HandleEvent);
  B52.addEventListener (MouseEvent.Click, HandleEvent);
  B53.addEventListener (MouseEvent.Click, HandleEvent);
  
  }
  public void handleEvent (e: MouseEvent): void
  {
  var a: String = e.target.name;
  Alert.Show (e.Target.Name);
  var b:String = null;
  Switch (a)
  {
  
  case 'Button20 ':
  b = TextBox.Text;
  TextBox.Text = "a";
  TextBox.Text = b + "a";
  break;

  
  case 'Button21 ':
  
  TextBox.Text = "b";
  TextBox.Text = b + "b";
  break;

  
  by default:
  
  TextBox.Text = "s";
  TextBox.Text = b + "s";
  }
  }
  
  []] >
  < / fx:Script >
  
  < s:Panel = "43" x y = "82" width = "527" height = "213" >
  < mx:Button = "71" x y = '86' id = "b1" label = "1" width = "30" height = "24" / >
  < s:Button = "180" x y = '86' id = "b2" label = "5" width = "30" height = "24" / >
  < s:Button = "127" x y = '86' id = "b3" label = "3" width = "30" height = "24" / >
  < s:Button = "99" x y = '86' id = "b4" label = "2" width = "30" height = "24" / >
  < s:Button = "323" x y = '86' id = "b5" label = "0" width = "30" height = "24" / >
  < s:Button = "294" x y = '86' id = "b6" label = "9" width = "30" height = "24" / >
  < s:Button = "265" x y = '86' id = "b7" label = "8" width = "30" height = "24" / >
  < s:Button x = '237' y = '86' id = "b8" label = "7" width = "30" height = "24" / >
  < s:Button = '209' x y = '86' id = "b9" label = "6" width = "30" height = "24" / >
  < s:Button = "42" x y = '86' id = "b10" label = "" ' "width ="30"height ="24"/ >"
  < s:Button x = "382" y = '86' id = "b11" label = "=" width = "30" height = "24" / >
  < s:Button = '353' x y = '86' id = "b12" label = "» largeur" width = "30" height = "24" / > "
  < s:Button = "410" x y = '86' id = "b13" label = "back" width = "76" height = "24" / >
  < s:Button = "157" x y = '86' id = "b14" label = "4" width = "30" height = "24" / >
  < s:Button = "43" x = "109" id = "b15" label = "tab" width = "66" height = "24" / >
  < s:Button = "105" x = "109" id = "b16" label = "q" width = "31" height = "24" / >
  < s:Button = "247" x = "109" id = "b17" label = "y" width = "30" height = "24" / >
  < s:Button '303' = x y = "109" id = "b18" label = "i" width = "31" height = "24" / >
  < s:Button = "361" x y = '110' id = "b19" label = "p" width = "34" height = "23" / >
  < s:Button = "394" x = "109" id = "b20" label = "[" width = "31" height = "24" / >] "
  < s:Button = "191" x = "109" id = "b21" label = "r" width = "34" height = "24" / >
  < s:Button '424' = x y = "109" id = "b22" label = "]" width = "31" height = "24" / > "
  < s:Button = "222" x = "109" id = "b23" label = "t" width = "31" height = "24" / >
  < s:Button = "161" x = "109" id = "b24" label = "e" width = "31" height = "24" / >
  < s:Button = "133" x = "109" id = "b25" label = "w" width = "31" height = "24" / >
  < s:Button = "332" x = "109" id = "b26" label = "o" width = "31" height = "24" / >
  < s:Button = "275" x = "109" id = "b27" label = "u" width = "31" height = "24" / >
  < s:Button = "220" x = "133" id = "b28" label = "g" width = "31" height = "24" / >
  < s:Button '424' = x y = "132" id = "b29" label = "enter" width = "62" height = "24" / >
  < s:Button = "43" x = "132" id = "b30" label = "caps" width = "66" height = "24" / >
  < s:Button = "275" x = "133" id = "b31" label = "j" width = "42" height = "23" / >
  < s:Button = "314" x = "132" id = "b32" label = "k" width = "31" height = "24" / >
  < s:Button = "133" x = "133" id = "b33" label = "s" width = "31" height = "23" / >
  < s:Button = "161" x = "133" id = "b34" label = "d" width = "31" height = "23" / >
  < s:Button = "250" x = "133" id = "b35" label = "h" width = "31" height = "23" / >
  < s:Button = "105" x = "133" id = "b36" label = "a" width = "31" height = "23" / >
  < s:Button = "191" x = "133" id = "b37" label = "f" width = "31" height = "23" / >
  < s:Button = "342" x = "132" id = "b38" label = "l" width = "31" height = "24" / >
  < s:Button = "152" x = "154" id = "b39" label = "x" width = "31" height = "24" / >
  < s:Button = "353" x = "154" id = "b40" label = "'." " Width = "31" height = "24" / >
  < s:Button = "325" x y = "154" id = "b41" label = "," width = "31" height = "24" / >
  < s:Button = "294" x = "154" id = "b42" label = "m" width = "31" height = "24" / >
  < s:Button = "259" x = "154" id = "b43" label = "n" width = "37" height = "24" / >
  < s:Button = '236' x y = "154" id = "b44" label = "b" width = "31" height = "24" / >
  < s:Button = "211" x = "154" id = "b45" label = "v" width = "31" height = "24" / >
  < s:Button = "181" x = "154" id = "b46" label = "c" width = "31" height = "24" / >
  < s:Button = "122" x = "154" id = "b47" label = "z" width = "31" height = "24" / >
  < s:Button = "380" x = "154" id = "b48" label = "/" width = "31" height = "24" / >
  < s:Button '368' = x y = "132" id = "b49" label width = ';' = "31" height = "24" / >
  < s:Button = "396" x = "132" id = "b50" label = "" ' "width ="31"height ="24"/ >"
  < s:Button = "43" x = "154" id = "b51" label = "shift" width = "82" height = "24" / >
  < s:Button '407' = x y = id = "154" "b52" label = "shift" width = "79" height = "24" / >
  < s:Button = "455" x = "109" id = "b53" label = "------" width = "31" height = "24" / >

  < / s:Panel >
  < s:TextInput = "161" x = "27" id = "textbox" width = "253" / >

  < / s:Application >

  Kind regards

  Saran r

  Hello

  http://gumbo.flashhub.NET/keyboard/

  It is a small example of a 'virtual' keyboard that will enter the text into a textinput/textarea component selected. Capslock and shift key States really aren't quite right (really need control shift/cap lock combo), but there is a simple tab and backspace (delete) and enter the function key.

  hope this is useful

  David.