Satellite A300 - 1EC Win XP: BSOD during the passage of external display

Similar Questions

• Satellite A300 power suddenly goes out during the race for hours

  Dear users of the Forum,

  I am facing a strange problem in operation.
  My laptop Satellite A300 is suddenly down power during the race for hours.
  It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

  This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

  I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

  Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

  I tried to run only on the power (remove battery) and got the same result.

  can anyone identify the problem? can you please give me the solution?

  smarjit1

  Hello

  I put t think it is s virus.
  En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
  I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

  Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

  What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

• XP SP3 causes BSOD during the passage of the WYSE Thin Client session to session VMware VDM Web Access

  Hello

  For our VDI environment, we use both clients Wyse thin (Thin OS 6.2.0_16) and VMware VDM Web Access to access Windows XP virtual machines that are available through the VMware VDM connection server. The connection and the agent server is at version 2.1.1 build-663. We run ESX 3.5 and Virtual Center 2.5 times with update 3.

  The issue I'm having is once a Windows XP SP2 virtual computer has been upgraded to SP3 will be blue screen when I try to access it for the Wyse terminal after his last accessed from VMware VDM Web Access. Order real to get there would be to access the VM SP3 from the Wyse Terminal, then go VDM Web access, and then again from the Wyse Terminal and it will have a blue screen. Disconnect or disconnect makes a difference. I'm curious to see if anyone else has this problem. I enclose the capture of blue screen and the mini dump file. If you need more information please let me know.

  Thanks for your help!

  -Pete

  Hi Peter,.

  The root cause of the problem is change colordepth of 15 bits to 16 bits. Let me explain the cause of the problem.

  -Connection of the terminal WYSE in a VM XP - effective colordepth in the RDP session = 15 bits

  -Access Web VDM from PC connection (I guess) - effective in the RDP session colordepth = 16 bits.

  -The switch back to results WYSE Thin Client = 15 new bits

  This actually switch between colordepth 15 bits to 16 bits and viseversa result BSOD.

  Thank you to use DesktopColorDepth = 16 RGB565 = Yes command in your wnos.ini and try to place this order through brokers VDM. It should solve the problem.

  Thank you

  Blanchon

• Can I back up my files on the partition of 'E' of my Satellite A300-1EC

  I bought a new laptop Satellite A300-1EC.
  I managed to complete the full installation of the system.

  When I check my drive I don't find that two drives 'C' and 'E '.
  Drive C is for the operating system, and 'E' is the data with a record HDD1 disk.

  Now if I want to save my normal files like in word, excel etc... that is the drive to back up my files.

  Savings in 'E' will affect the operation of computers.

  best regards to all

  carpet

  Hello

  I assume that the E partition contains data that are necessary to start the Toshiba HDD recover.

  I think you could save your files on the partition E too, but you shouldn't change t or t should remove all the files and data that already exist on the E partition.

  Good bye

• What is the difference between the Satellite A300-1EC & Satellite A300-1EG

  Why does the Satellite A300-1EC more expensive stand as Satellite A300-1EG, but configuration loses him?

  What is their substantial distinction in?
  What model of laptop may indicate, in this price range?

  Hello

  Satellite A300-1EC belongs to the Group PSAG0E and Satellite A300-1EC to PSAG4E. When this model numbers are different, it means that they do not have the same hardware configuration.

  The first has Intel graphics controller 965GM (Crestline). The second is M82XT ATI (256 MB). The capacity of the HARD disk is not the same. The first a 160 GB HDD and secondly a 250 GB.

  So that's the difference between these notebooks of the A300.

  In my view, the other is better. You have to make your decision and choose the right one.

• Need suggestions Satellite A205-S5841 and Satellite A300-1EC

  Hello

  I need to hear now, I have a Toshiba Satellite A205 - S5841 what Dual Core 1.73 GHz.
  I intend to buy the Toshiba Satellite A300-1EC, which is Core 2 Duo 2.0 Ghz...

  Tell me is interesting?

  Its your choice. The A200 is too slow with the Applications that you use? Do you need to improve 3D performance? Photoshop takes too long to process the images?

  The A300 would have a faster graphics chip, faster memory, more fast/more big HDD, better connectivity, perhaps more memory, more features, grunt a little more CPU.

  Take a look at the specifications in the Brochure and decide if elements or the quicker features you would enjoy. My friend has an A300 with facial recognition (and FM radio I think!), its quite a good machine :)

• Satellite A300 - nothing happens if I press the FN key

  Hi guys

  I own a Toshiba Satellite A300-15J with Windows Vista and the FN key no longer works. When I press FN key on nothing happens. Which driver do you think one should install?

  Thank you.

  Hey Buddy,

  I did a forum search and I found some similar topics are contiguous FN keys:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=62172
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=62181
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=62112

  I hope that helps! :)

• Satellite A300-20 q are not on the tech support page

  Satellite A300-20 q are not on the tech support page. I can see 20 p, 20R, but not 20 q. Even a model automatic detector cannot find it in a database. Correct this error.

  Hello

  I don't know which pages or the database, you are meaning, but the Satellite A300-20 q is not available in all countries!

  This model was released for the Russia market.

  Other models of Sat A300-xxx are avaialbel on the other countries of South-East European/medium.

  Welcome them

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!

• Wheel rotation during the passage of the apps

  Hello

  I frequently meet the spinning wheel during the passage of the apps. For example an app can do one, but open window have not been used for a while and then when I click on the window to use it I get the wheel spinning for a few seconds.

  I am running Yosemite 10.10.5 on a MacPro Mid 2010) with 16 GB of ram and 12 GB available on the 300 GB SSD drive. I just realized that maybe space on the boot drive may be the cause, so I'll empty now and update if there is no change.

  Also, my SSD is a 500 GB Samsung SSD 840 EVO media and I think that the TRIM is not enabled? I read that TRIM was not based with SSDS of third party on my machine and was picking up information contradictory as to the time it was a problem or not. The lack of TRIM could be the cause of the spinning wheel?

  Duane

  You ran a 'cleaning', 'optimize' or 'speed up' apps on your Mac?  Have you installed an antivirus software?

  The 12 GB of free space must be sufficient and not to be the cause of the problem. Don't let him get any small however.

  

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• CC in Lightroom on Windows 10 crashes during the passage of the library to develop.

  Everyone has a problem with Frost during the passage of the library to develop modules in Lightroom on Windows 10 CC?

  Hi mgmagney,

  This could be because of the graphics processor.

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.

  Kind regards

  Claes

• Satellite M60-164 - BSOD during the windows loading screen

  On startup, I get the blue screen of death during the windows loading screen.

  I don't have a recovery cd, only a cd of OS (windows xp SP1a), which shows the option to repair but prompts then insert the recovery cd, how and where can I get one of these!

  No matter what help get a restore for Toshiba Satellite M60-164 Pro cd would be much appreciated!

  I think I know why you get a BSOD.
  You said that you have installed the Win XP SP1a.

  You must Win XP SP2!

  If you wish, you can create a CD Win XP SP2 clean! How? It's very easy. You need the tool freeware nLite (google for it and how to use it).

  Using the nLite application you could create a new XP CD and could include SP2 in this CD. You can then use this disk to start!

  By the way; The Toshiba recovery disc can be ordered from the ASP

• Satellite A300-1EC cannot load the OS and restart just /shuts down

  Can you help me with my problem of A300 PSAG0Elaptop.

  This is the case:
  before that I can still use my laptop normally without plugging the power cord but when plug the source ca the unit restarts all of a sudden. I charge the battery only when the unit is off. And now the worst case gets when I installed the recovery disk hoping would solve the problem. I can no longer load the operating system; It's just loading then it does not load and suddenly shuts down and sometimes simply frozen. I have not tried the safe mode, mode ahci, system recovery, system repair, and stil no chance.
  I brought this already at the center of ASP service and they demanded almost 1 unit brand new laptop for repair of my laptop is not advisable to send them to repair.
  I doubt that my system bios is not compatible with my vista Home premium OS, or perhaps my wife update of the bios that is not compatible in windows update. My current bios I checked is 1.4

  Given that I have no option instead of junking my laptop, I want to update or back to the original settings of the bios that can help to repair my device.
  Can you help me on how to update or revert to the original my system bios? As I can't access the windows can you teach me step by step using the usb port of my camera on system bios update? Or do you have any suggestions?

  Need help bad
  Here are the specs of my unit
  A300-1EC
  P / N:PSAG0E - 02J025AR
  Windows vista Home premium core 2 duo T5750

  Hey Buddy,

  First of all, the BIOS can only be updated Windows System. There is no other version that you can download on the site Web of Toshiba.

  But I doubt that this problem is caused by the BIOS. It s I knew not that it is possible to change certain values which make impossible Windows installation. With other words BIOS is secure and with all the settings, it should be possible to install Windows.
  An alternative you can press F9 in BIOS to load the default settings. That would be the best option.

  But according to your assignment, if Windows installation of recovery disc doesn t work and you are not able to charge the battery while the laptop is turned on it seems to be a hardware malfunction because seriously it has nothing to do with the software.

  So either come you into contact with the ASP to get the repaired device or you can repair yourself with original spare parts with parts ASP or second-hand on eBay or similar platforms.
  Of course, you can buy a new laptop: in case the motherboard would be defective because the motherboard is very expensive spare part, it would be the best choice in my opinion.

• Satellite A300 - 1 FT - where to find the USB2 Win XP drivers

  Hi all

  I ve loaded WinXP on my Satellite A300 and now I n t have the USB2 drivers (USB speed = 2 mb/s)

  Anyone know where I can find them?

  Concerning
  Oli

  PS: data from the laptop

  Laptop
  Satellite A300 PSAGCE

  Hello

  First of al USB drivers are designed by Microsoft and these drivers are still included in the Windows operating system.
  As far as I know that the XP SP2 allows you to get the USB2 functionality.

  I would recommend Windows XP update to the last State.