Check boxes not showing results

Similar Questions

• With value of check box for show/hide radio buttons?

  I have created a pdf form. I have a checkbox and radio buttons several. I put it so radio buttons are hidden until the user clicks on the checkbox above him. I also put the box reset option on mouse-to top buttons. However, radio buttons are always selectable. I want to assure you that if one of the radio options is selected, the check box to be checked as well.

  Is there a bit of javascript, I could add to the check box to hide the option buttons if its value is not equal to yes (checked)?

  You can use code similar to

  If (event.target.value == 'Yes') {}
  selected - display radio buttons
  this.getField('Radio_Button1').display = display.visible; view the radio button
  } else {}
  Show box unchecked hide radio button and reset the field
  this.getField('Radio_Button1').display = display.hidden; Hide radio button
  this.resetForm (["Radio Button1'"]); Disable the option button
  }

  But YOY will have to change the field "Radio Button1" name match your fyouor domain name to the Group of radio buttons.

• Captivate 7: entry boxes not showing captions failure when the bad input.

  Hello.  I'm under Captivate 7.0.1.237 on a PC with IE 9 as my default browser.

  Something has changed in the text entry areas (TEBs) and the way that they validate.  It was think I would enter several options validation of the user and, if the user didn't enter one of the correct entries in the BER my failure message would come by telling them what to enter.

  This is not the case, instead, when I have to go to the next slide BER, the project advances to the next slide if they have input a correct answer or not.  I can type any kind of junk in BER and I get no legend of failure.

  At this point, I change my TEBs for the following parameters have experimented and added a box to click with the shortcut tab (because that's how the application that I am a teacher moves a field to) the value, but the problem still occurred. Earlier in the project, I had shortcuts to my TEBs defined in the tab, but that's when I noticed the problem:

  

  

  

  I only put my BER close to the top of my calendar because I had problems with the click boxes do not display failure messages when they were farther down in the timeline panel.  They are now on top.

  Thank you!

  Michele

  Ah... so Captivate is a large junk covered oak desk.  Well, that explains why I never find anything in Captivate 8!  I bet it's got drawers full of "features" hidden and bugs are just woodworm.

• Remove link to refresh not showing results.

  Hi gurus,
  
  Please let me know whether this requirement is possible.
  
  We used view 'No. result' in all our reports. Default refresh link is visible when a no. results view appears. Is there anyway that we can remove the link refresh the view of 'No result '.

  Just inject some javascript:

  put this in the text portion of not displaying the results:

  
  
   Try chancing your filters
  

  concerning

  John
  http://obiee101.blogspot.com

• Film display options-not showing flags

  LR 3.5 running XP v5.1. See all options are checked, does not show if the adjustments, cropped, pick, etc. And it does not show in the display of the grid. Works fine in LR 3.4.1 v6.1. This bug can be fixed easily? Thank you.

  For the film, there are two controls to show badges. First of all, the possibility to display must be set, not in Display Options, but in Edit > Preferences > Interface tab > segment of film strip.  Then the film itself must be large enough to display the badges you've chosen... If it is too small, it will not appear.

  So, first check your preferences, then make sure that the film is big enough.

  If labels are not displayed in the grid view, go to view > Display Options > tab grid view and if sure in the segment of the icons of the cell that you have enabled the option for the flags and insignia of the tile.

• How can I get the TestStand splash screen to not show up when I call the results treatment Utility offline?

  So I call the Offline processing Utility (ORPU) a not executable call results in a plugin to perform a personalised treatment in another configuration.  Everything works fine, including having run reduced (mostly hidden) by using the option/tray.  When he called, the TestStand splash screen appears (certainly is not a show-stopper but it's confusing from the point of view of the user).

  Is it possible that I can get this start screen to not appear when calling the ORPU?  I noticed in the help, mention is made of the use of the callback file, and I wonder if someone has successfully used this to avoid the dialog box or other behaviors.  I would like more info on how it works, but it doesn't seem to be a vast detail on this in the help, and I'm not also find me useful examples.

  The source of the Offline utility treatment results is included with TestStand and can be changed.

  The ORPU source is located under "Components\Models\TestStandModels\Offline utility treatment results"

  From the source, you can see that there is no flag that allows you to hide the splash screen (except for / I leave, but that it will also close the ORPU!); However, you can easily change the ORPU so it does not show the start screen by removing the following lines in \Components\Models\TestStandModels\Offline Results Processing Utility\OfflineResultsProcessingUtility\MainForm.cs

  If (! data.) Quit smoking)
  splashScreenForm = new SplashScreen (mEngine, false);

  Regarding the flags without papers, there are not really many flags undocumented in the ORPU (even once, you can see them in the source), and undocumented flags have very specific use cases (open files from shell and NEITHER internal regression tests).

  A (non-official) complete list of indicators ORPU from 2014 TS:

  /?
  Shows help

  / tray
  Starts the ORPU in the status bar

  / exit-when-done
  Exits when all files are made

  / I'm leaving
  Leave immediately

  /process - files - Missing - Data
  Treats the files even if they lack of data

  / which-process-files-Missing-Data
  Do not process files that are missing data, show only a mistake (it is the default behavior).

  / Process-All-Profiles
  Start all profiles

  / Process-No.-Profiles
  Don't start any profile

  / Process-Profiles
  Treat the profiles specified in the following arguments

  / process-files
  Add the files specified for the specified profile

  / log - level

  Sets the logging level for the newspaper ORPU, all of the messages above, the specified log level is saved.

  /ShellOpen
  It is an internal indicator, it is used to treat applications for the shell (for example, after a double click on a tsr in Windows Explorer). Do not use this indicator.

  / non-interactive
  It is an internal indicator used for the test. Do not use this indicator.

  Please note that NEITHER does not support appellant flags undocumented and that NEITHER is not guaranteeing backward compatibility of these flags undocumented and they could change at any time, without warning.

  For a more detailed explanation of the working of each option, refer to the Arguments of the command line Utility using TestStand treatment results offline.

  Hope this helps,

  Francisco

• Check box to hide the subform does not

  I have what I think it's a pretty simple dilemma. I have a check box that will be used to show/hide a subform when checked/unchecked.

  However, any code that I have written seems to work. The box is an object in page1 and not wrapped in subforms. The subform has simply two inside text fields. the properties of the box have been defined for bind values are 1 for archiving, 0 for uncontrolled. The fields in the subform exploit the value "invisible" because I don't want to see these fields in the form (unless the box is checked).

  My code is:

  Form1. Page1.newspaper::click - (JavaScript, client)

  If (this.rawValue == 0) {}

  xfa.resolveNode ("form1..") Presence Page1.Newspaper_Subform") ="hidden ";

  }

  else {}

  xfa.resolveNode ("form1..") Presence Page1.Newspaper_Subform") ="visible ";

  }

  This code is located in the under JavaScript click event. The form is saved in a dynamic XML form to Adobe. I use Adobe Pro XI and LC ss4

  I can do this work in the generator of the action, but I want the subform back to hidden when unchecked.

  Obviously, a beginner in Java script, ideas/help you might have would be appreciated.

  What exactly is the problem?  Is this not not showing or hiding not when you change the box?  According to your description, you have two text boxes the invisible value but your script changes only the presence of the subform.  If you show the subform without changing the presence of text boxes, they will remain invisible.  If you want all show/hide together, set the presence visible text boxes and simply change the subform presence as you are now.

• DataGrid with multiple check boxes works not when scroll vertically

  Hello

  I need a help in the coding of the flex, I'm a list of countries where several checkboxes in a datagrid control. Like anyone in a datagrid, I added the vertical scroll bar appears to show all the items in the datagrid with the boxes in front of each item. Now I select the item by checking the boxes I scroll in the datagrid my selection not get selected. I need my selected check box remains selected even I scroll to the bottom of the data grid upwards or downwards. Is there any solution for this? or is it the bug in flex. My Code is as follows

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"> "

  < mx:ArrayCollection id = 'people' >

  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  < mx:Object >
  < Mx:name > CBA < / mx:name >
  Senior Software Engineer < mx:title > < / mx:title >
  < mx:description > to work as a developer SR. < / mx:description >
  < / mx:Object >
  
  < / mx:ArrayCollection >
  < mx:Box height = "100%" width = "100%" showEffect = "Bland" styleName = "padBox" direction = "horizontal" verticalScrollPolicy = 'auto' >
  
  < mx:DataGrid allowMultipleSelection = "true" id = "dg_disk" dataProvider = "{people}" height = "100%" width = "100%" selectedIndex = "0" x = "50" y = "50" >
  < mx:columns >
  < mx:DataGridColumn dataField = "name" id = "empname" headerText = "EmpName" / >
  < mx:DataGridColumn dataField = "title" id = "title" headerText = "Title" / >
  < mx:DataGridColumn dataField = "description" id = "desc" headerText = "Description" / >
  < mx:DataGridColumn dataField = "selected" id = "selected" headerText = "Select" width = "150" >
  
  < mx:itemRenderer >
  < mx:Component >
  < mx:HBox horizontalAlign = "center" >
  < mx:CheckBox id = selected = "{data.titile"ch_box"}" / > "
  
  < / mx:HBox >
  < / mx:Component >
  < / mx:itemRenderer >
  < / mx:DataGridColumn >
  < / mx:columns >
  
  < / mx:DataGrid >
  
  < / mx:Box >
  < / mx:Application >

  Add the data field selected in your Arraycollection collection.

  
      ABC
      Senior Software Engineer
      Working as a developer SR.
      0
  

  And are due to changes in the control check box.

  
                
                     
                     
                          
                             
                            
                         
                     
                   
                 

  Thank you and best regards,
  ......................................................................................... ..
  POOJA Kuber | [email protected] | www.infocepts.com

  .......................................................................................... .

• Show/hide subform by using a check box - Please HELP

  Hi guys,.

  I am fairly new to Adobe Livecycle and javascript in general. I am trying to create a form that has multiple check boxes. When you have selected a checbox, I want to show a subform. If this is not checked, I want the subform to be hidden.

  Under the for the checkbox control's click event, I tried the following:

  If (this.rawValue == 1)
  {
  CheckBox1.presence = "visible";
  }
  on the other
  CheckBox1.presence = "invisible";
  }

  Also, I don't want the subforms to display when the form opens, when the user clicks the check box.

  IT DOES NOT WORK. Help, please!

  Thank you

  Use formcalc:

  On the Click event

  If ($.rawValue == 1) then
  subformname. PRESENCE "visible" =
  else subformname.presence = "hidden"
  endif

• Checking update Java plug-in does not show latest version after update same

  Checking update Java plug-in does not show latest version after update same

  You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

  See also:

  • Article on Java Mozilla - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
  • VΘrifier versions on site Java - http://www.java.com/en/download/installed.jsp

  Other - you should check your Plugins and update as needed.

  • Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in, version 11.6.7.637 (aka Shockwave Player. Not the same as Flash/Shockwave Flash/Adobe Flash Player)
    • http://KB.mozillazine.org/Shockwave (mozillazine.org seems to be down at the moment (12/12/2012 11:34 am PDT), try again later)
    • Download, save, exit/close all browsers, run the installation program you just downloaded - http://get.adobe.com/shockwave/thankyou/
  • Adobe PDF plugin for Firefox and Netscape 10.1.4 (Adobe Reader 11 is the current version)
    • https://support.Mozilla.org/en-us/KB/use-Adobe-Reader-plugin-view-or-download-PDF-files

• I checked view bookmarks bar, but it does not show. I have no place to put my favorites that I use a lot.

  I went on the view menu, selected bookmarks toolbar, but it does not show. I use it a lot for my url frequently used. I prob won't use firefox more if she does not have this feature. I don't want to have to go in bookmarks regular just to check my email, etc.

  Hello Mark.

  It is possible that you have made some changes in the interface that deleted bookmarks in the bookmarks toolbar. Go in view > tools > customize... > Restore Default Set and everything should be back to normal. By this, I mean that your interface will return to its default configurations. You can reconfigure (in the same window) to your liking, after that.

  Otherwise, you should be able to drag the corresponding item in the window in the bookmarks toolbar, but it is perhaps more difficult to accomplish if you are not experienced enough.

• by clicking on the apple logo, menus and check boxes do not work on the first click

  Strange behavior from El Capitan OS X 10.11.1.

  When I click on the Apple Logo, menus, and check boxes, the action does not stick.

  To open the Apple Logo, the menu appears quickly but then folds upwards, as if I had not clicked.  Pretty well, click on the third, the menu opens.

  In the Finder, when I click on a menu like file, edit, or display, the menu appears, and then restores upward. Again, after three clicks in opens.

  In Safari, on a page Web, clicking on a checkbox does not stick. I need to click three times.  I when in Safari settings to clear the cache, I also checked the box to request the site "don't follow me." And even in the actual application of Safari, the box wouldn't fit.  I clicked it three times before the box stuck.

  Installation program:

  iMac 24 - early 2008

  4 GB

  El Capitan 10.11.1

  I changed the mouse, and this has solved the problem.

• in my printer, I fill ink but when check here see the ink did not show anything

  so last week my printer working correctly and there see the ink low level. so, I refill the ink. so, when I saw the ink level, it did not show anything. the ink was no more.

  Hi Raghini,

  What is the brand and model of the printer?

  If you facing problems with the ink level, you could get in touch with the manufacturer of the printer to get the replaced cartridge or for further assistance on this issue.

  For more information, see the article:

  Check on a printer ink levels

• I get e-mail with pictures, but the pictures do not show I get a gray box

  I get e-mails with pictures but the pictures do not show that only receive a box grey.

  What should I do to get photos with photo comments?

  Hello

  1 are you faced with the question in the client program, e-mail or webmail?
  2 are you facing issue with a particular Email or all emails containing photos?

  Please follow the link:

  Images are not displayed and a red X may appear on Web sites in Internet Explorer:
  http://support.Microsoft.com/kb/283807

  I hope this helps.

• MS Photo Gallery, how can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  How can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?

  The dialog box that appears frequently when I try to convert or download photos, shows the shadow of this question - I want to make it active until the times dialog box stops appearing I scroll the photo folders.

  Thank you

  I got the last part of what you wanted, which was simply not the message

  The key is that you have to allow this program through your windows firewall.

  Go to your look for the windows Firewall Control Panel,

  There should be a list to allow a program through windows firewall, look at the top left.

  If you feel safe doing this, vlc is not one that I would feel safe with, but to you, it has a function to browse to find the program to be added to your trusted list or access through your firewall.

  Still, it may give you a warning but could release the message?