Check if host are connected to Virtual Center, not a cmdlet command, but from a file

Similar Questions

• Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

  Original title: problem: Guest account does not work even after activation due to profile problems.

  After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

    RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

  The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

  I'm running Windows 7 Ultimate x 64 edition.

  Christopher S. Charabaruk

  Well guys,.

  The simplest solution is to read what the error.

  "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

  I tried a lot of suggestion, but delete the file crazy and that's all working again.

  Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

  Hope this has been helpful.

  Commander Paul

• Cannot perform any action on an ESX connected to Virtual Center Server

  Hi all

  I have an ESX Server which shows connected to my Virtual Center. I can access the virtual machines that are on the ESX of Virtual Center Server. However, none of the commands are available for the ESX Server when selected or by using a right-click on the mouse when the server is selected. All that shows is the summary of the report and the performance report all others are gray.

  I stop all VMs and you restart the ESX Server. Always displays the same State. Can someone provide suggestions about where to look to fix this problem.

  Thank you

  Robert

  I would check your permissions - you are not these permissions at the host level.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• How to remove the host esx 3.5 virtual Center

  Can't find info on how to do to remove the host esx virtual center.

  How to do?

  THX.

  Right-click on your host in the left pane and click Disconnect and then once it is disconnected you can right click on the host again and click on Remove and which removes the host to vCenter.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• IVI go check if routes are connected

  Trying to connect a route connected already will generate an error.

  What is the best way to check if a group of route is connected before you try to establish a connection?

  I m using IVI and Switch Executive to connect/disconnect the route groups.

  Try to build a switch sequence something like that.

  Get the name of the group as an argument road. First, check if the routing group is connected (avoiding an error). If not, connect the Group itinerary, otherwise do nothing.

  Using the 'Get information' operation and entering the "route"(not groupe) in the channel 1 and channel 2 and checking the status seems to work ".

  But it seems to work by using road names (not the itinerary for group names).

  And I can't find how to resolve route of group names to links using IVI switch stage. (can make using Labview. but you can't combine LV IVI and IVI switch)

  PER DAY

  You are looking for routes multiconnect. This is a setting that you can configure in the NI Switch Executive (NISE) for routes individually.

  Enabling this setting allows a road linking several times without generating the error that you have mentioned.

  However, a way of opening must be as often that you closed before. It is the task of the calling application to keep track on how many times you have closed or you just repreat by opening the road until you get an error of NISE.

  I think that already there is the feature request NISE stores the number of closures by route and add functions to query this information. Unfortunately, I have found it in less than a minute so maybe you want to spend more time to find. If you can't find, please do not hesitate to post (in the idea exchange forums!).

  Thank you

  Norbert

• The GSSAPI/Kerberos ticket is not accepted by the server POPs please check that you are connected to the domain Kerberos/GSSAPI. How can I fix it?

  I just downloaded and installed Thunderbird on a new computer Windows 8. I get the message in the title when I press the Get Mail button

  Press Alt or F10 to display the Menu bar, and then select the toolbars under view/toolbars.

  I think you should change the Normal password authentication and maintain the security of the SSL/TLS connection.

  http://help.Telecom.co.nz/app/answers/detail/A_ID/21595/~/Telecom-business-mail

• My client vsphere VM say suddenly that my hosts are connected!

  I did nothing, but suddenly disconnected says first and then the others follow! -ESX 4

  So, if you create a second for redundancy and see if the problem is back?

  MCP, VCP

• V50.0.2: * all * download left-clicked links seem to not start at all - but in fact files are downloaded silently as .part to the temp folder

  Since a few hours ago, I click on the download links are not processed as expected:

  -There is no indication of a download link click at all, that is, no confirmation, no dialog box to choose the destination folder, etc.

  -downloads TO start even if files are downloaded SILENTLY in the folder Temp (C:\Users\***\AppData\Local\Temp) as a .part files (and stay there when the download is complete)

  -C' is the case on Web site downloads, I tried

  -the library has no record that all the files have been downloaded

  -There is also no indication of a download completion

  -downloaded files are intact as far as I can tell (tested by renaming and extract a zip file)

  -However, right-clicking and choosing "save link under ' works very well

  -In addition, the elements of the popup menu "downthemall" Download Manager work very well (for example "save the link with downthemall")

  -ive also noticed that closing the download source tab does not cancel the download, for that I have to close completely the ff

  Measures taken so far:

  -restart ff

  -restart the computer

  ran-a anti-virus (avast), ran malwarebytes scan

  -ran ff with all extensions disabled: same problem

  -a went through the steps detailed here: https://support.mozilla.org/en-US/kb/cant-download-or-save-files

  -tried to download files with the different browser: worked well

  -tried to download files with profile ff different: worked well

  -tried to download files in safe mode ff: worked well

  ... any ideas?

  • shrug *.

  I "solved" this by backup of bookmarks, passwords and settings and such things of the migration to a fresh profile ('refresh function'), as well as reinstall and - configure my extensions.

• Considerations of Design for the U1 Virtual Center 6.0

  I look at the deployment options in my environment and the plan initially to resist a LAB environment. I was looking at the possibility of defending the VCSA "LAB" with HA PSC behind and F5 load balancing. My question / concerns are I will be at a later date connect you to windows or virtual VCSA in this HA PSC environment? I know that you cannot mix windows and the PSC system, but I think that you should not have problems connecting a virtual center of windows to VCSA PSC? I hope that what I am asking is logical...

  "vCenter Server Deployment Models" > "mixed operating system environment' > 'Eexample of a mixed environment of operating systems with a device of service of external platform controller' section of the documentation of vSphere 6 have answers to your question." " It goes the same for environmental HA PSC behind F5.

• Virtual center of PowerShell version vc

  Hello

  Can you help me to get the version of my virtual center with a powershell command.

  I ask this question because I have vc vsphere 4 and vsphere 5.

  When I connect to the virtual Center, I would like to know if I'm on a virtual center of vsphere 4 or vsphere 5

  Thank you for your help

  Hello

  (get-view serviceinstance). Content.About.version

  or

  (get-view serviceinstance). Content.About.Fullname

  If you work with the multi mode:

  (get-view-Server $global: serviceinstance DefaultVIServers [0]) Content.About.version

  returning to the first vc [1] for the second etc.

• Update ESXi with a Virtual Center Server

  Hello

  I've updated a Standalone ESXi server using this guide

  http://www.vmadmin.co.UK/VMware/35-esxserver/262-esxvihostupdate

  It works the same way during the updating of the ESXi servers that are under a virtual Center Server?

  Thank you

  as part of the upgrade, using Crossover, a new vCenter agent is pushed. So, no, you don't break anything.

• The addition of ESXi in Virtual Center

  Hello

  When you try to add the ESXi server, it asks:

  That's what I saw in the virtual Center

  

  you're out agents from vCenter for ESX.  To add the host in question, you will have to remove another or acquire several licenses.  However you can still manage, but not in your vCenter server.

  If you feel this or any other answer was 'useful' or 'proper' Please consider awarding points.

• slow when they are connected via anyconnect VPN, ASA OS 9.0

  Hi guys

  My users are complaining that they are experience slowness when they are connected via vpn anyconnect for ASA os 9.x, 5 Mb files tikes 15 mts rough with them, even if these users also have a connection broadband on their place

  any guy insight

  Thank you

  Hi Ibrahim.

  My first suggestion to you is to follow the recommendations of Cisco, associated with latency problems.

  hostname (config) #-group attributes policy
  hostname (config-Group-Policy) #webvpn
  hostname (config-group-webvpn) select #svc dtls
  hostname (config-group-webvpn) #svc df-bit-ignore enable
  hostname (config-group-webvpn) #svc routing-filtering-ignore enable
  hostname (config-group-webvpn) mtu #svc 1200
  hostname (config-group-webvpn) #svc compression no

  (a more recent version, you can use the command "anyconnect" instead of "svc")

  If after this the problem persists please let me know when is the right time to reproduce the problem and collect the balls, debugs and catches. I also need the current configuration of the SAA (see technology in a txt file)

  Kind regards

  Aditya

  Please evaluate the useful messages.

• ORA-01733-virtual column not allowed here - insert using inline view

  Does anyone know why I get ORA-01733-virtual column not allowed here
  
  SQL > select * from v version $;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  PL/SQL release 11.1.0.6.0 - Production
  CORE 11.1.0.6.0 Production
  AMT for 32-bit Windows: Version 11.1.0.6.0 - Production
  NLSRTL Version 11.1.0.6.0 - Production
  
  
  
  -no error without the WITH CHECK option
  
  SQL > INSERT INTO
  2 (SELECT
  3 location_id,
  4 city
  5 l.country_id
  6 OF country c, localities, regions r l
  7 where l.country_id = c.country_id
  8 and c.region_id = r.region_id
  9 and r.region_name = 'Asia')
  10 VALUES (5500, 'Common Wansdworth', 'UK');
  
  1 line of creation.
  
  SQL > rollback;
  
  Complete restoration.
  
  
  -error with WITH CHECK OPTION
  
  
  SQL > INSERT INTO
  2 (SELECT
  3 location_id,
  4 city
  5 l.country_id
  6 OF country c, localities, regions r l
  7 where l.country_id = c.country_id
  8 and c.region_id = r.region_id
  9 and r.region_name = 'Asia' WITH CHECK OPTION)
  10 VALUES (5500, 'Common Wansdworth', 'UK');
  INSERT INTO
  *
  ERROR on line 1:
  ORA-01733: virtual column not allowed here
  
  
  
  
  I was expecting
  
  ORA-01402: discovers the violation of where WITH CHECK OPTION clause
  
  for the second. Am I missing here?

  Coskan wrote:
  Randolf

  Thanks a lot for the update of this old question
  After reading the link, I think I should ignore this error and accept him as ORA-01402

  The information that you have asked me to check me do not have an understanding of the different error types.

  Coskan,

  I didn't know this is an old thread that somehow got updated by someone else.

  Regarding your question: you're right that the output of the script is not really that useful.

  I have just run on 10.2.0.4 and in general, it seems that the output of USER_UPDATABLE_COLUMNS is incorrect regarding the views of join using the WITH CHECK OPTION.

  For example although the location_id from the TEST_V_2 column appears as non-editable (probably because of the rule that "the columns used in the join expression" cannot be modified in a join view when you use the WITH CHECK OPTION) I can run successfully your insert if statement I choose a location_id less than 2000.

  It seems that summed up the difference if you join more than two tables, you'll always get the error "ORA-01733" when you try to insert in the join with the enabled OPTION CHECK view. For example to add a third table TEST_V_2 which does not change the original view, but simply joined meaning for example COUNTRIES to LOCATIONS, will show the same behavior to throw an ORA-01733, however it works fine when the omission of the WITH CHECK OPTION.

  So overall, I tend to say it is really a limitation of the implementation and it is not actually an ORA-01402 but looks like Oracle is simply trying to tell you: Amendment No. INSERT in this possible view. Updates however seem to work, at least I can find some examples of work.

  There seems to be other restrictions of implementation with the WITH CHECK OPTION in place even when the only membership as two tables, for example when trying to join the COUNTRIES and PLACES but by selecting only in PLACES and by using a filter on the COUNTRY_ID predicate fails with ORA-01733 when this predicate is applied to the COUNTRY. COUNTRY_ID but it works if this predicate is applied to PLACES. COUNTRY_ID.

  I could imagine that Oracle has quietly added some of these restrictions with each patch set due to the angle of the case/adverse reactions encountered. I saw this for other features, too.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Connect hosts vSphere 4.1 again Virtual Center 5.0?

  We have Virtual Center 4.1 and all our hosts vSphere 4.1.

  I want to install a new VC 5.0 with dvSwitch 4.1.

  Then I whant to disconnect our hosts vSphere 4.1 4.1 VC, and reconnect them to our VC 5.0.

  I have not created any dvSwitch on the new VC 5.0.

  When I reconnect hosts vSphere 4.1 to the new VC 5.0, are the old dvSwitches then created 4.1 on the new VC 5.0, so I did not need to create them, before I have to reconnect?

  When you create the vDS on the new vCenter you will need to create it as a 4.1 vDS your host still being 4.1.

  You must disconnect and remove your host of your old VC (and former vDS) and then an add-in host on the new Victoria Cross.  After you have added the host of the new Victoria Cross you need to connect them to the new vDS.

  Best thing maybe create standard switches on hosts and migrate all your VMS and vmks to that.  Unplug and remove from current VC.  Add the host to the new CR.  Set and migration of networks to vDS.  This will reduce also any potential stop (against briefly during the network of back migration service VDS standard).

  Hope that makes sense.

  Hersey

  MauroBonder Posted the KB which describes the process a little better that I did.

  Post edited by: herseyc