Check if the device is connected

Similar Questions

• How to check if DAQmx device is connected?

  Hello

  I want to measure 2 channels of Daqmx USB-6211 permanently.

  If I want to write USB-6211, I do anywhere in the variable global project "Authorization of the usb-6211" false and do not measure anything, just write (value of the magnetic field, for example).

  Question: I want to know if the device is connected. If this isn't the case - no action, not writing. How to easily check if the device is connected?

  Previously I did as in the example more has not clearly task if the device is disconnected.

  In several Labview boots, this resulted in:

  (a) the error prior to the start of Labview: "the last time that you have run LabVIEW, in-house WARNING 0x30EA5E5C occurred in fpinval.cpp".

  (b) total each use of DAQmx gel create a task

  Whenever I have to reinstall OR-DAQmx to do its functions work.

  Help, please.

  Thank you, Gregory.

  Hi dimitriev,.

  You can check the DAQmx devices available using property DAQmx nodes. When you use two USB6211 you can even check their serial numbers:

  

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to check if the device is configured for the HTTP connection data plan?

  Is it possible to check if the device has data during http connection (regular data plan just not bes or bis)?

  I don't want my app to make connections if it leads to an additional burden for the user by the carrier.

  lol but you can provide it as an option to the user, he should know.

• Check if the device is online.

  How can I check if my device is connected to a form any Internet and where can get the last 10 Blackberry API documentation?

  navigator.onLine is the recommended approach

• Adding a device:-201401. Make sure that the device is connected?

  I was able to set up my Explorer Measurement & Automation to detect my device (NI cDAQ-9188), but I'm unable to add the device.  The error statement says:

  Add the device failed.  From the device driver error report is as follows:

  Add a device

  -201401

  Recovery of the properties of the network device failed.  Make sure that the device is connected.

  How can I fix this so that I can test my modules e/s?

  DAQmx version: 9.7.5

  Operating system: Windows 7 64-bit

  Initially:

  In the tab network adapters, it reads:

  -No network adapters found

  In the tab of the firmware, it reads:

  -firmware version: 1.1.0f0

  Based on the status of the network configuration tab, I assumed that my problem was related to the network connection.  I have reset my network cards and this seemed to solve my problem.  Thanks for your help.

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Problem with burning Audio files to a blank CD error "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"

  I recently burned music CD blank so I can enjoy some songs in the car. After that a few discs engraved with success, I received the message "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"when trying to burn audio. To see if it was the m drive, I tried to burn audio files to four separate discs and each of them had the error message. The discs are brand new and have no information on them. I do something wrong or is my burner disconnected? Thanks for all your help and your support! I hope that we can find the cause of this problem so I can continue to make the CDs.

  Consumers concerned,

  Cody bridges

  Could you also confirm that it is playing the discs ok?

  Run the sfc tool and see if it shows anything... instructions here.

  http://support.Microsoft.com/kb/929833/en-us

• I can check if the device has been jailbreak/sideload using c + c++ / qml?

  Hi all

  Are there ways I can check if the device (Z10) was jailbreak or sideload in my application?

  If yes how can I check for this?

  Are there any examples or tutorials is welcome.

  Thanks in advance.

  There is no jailbreak for bb10.
  as binary application cannot be extracted from the device a distributed world bb application is not available on sideload.

• How to check if the device is in a call

  How can I check if the device is currently in a call? as is a call active?

  Thank you.

  Try this:

  PhoneCall call = Phone.getActiveCall ();

  If call! = null, there is a call in progress.

• Office Jet 8610: Device appearing is not in the device tab connected hp after entering the claim code (for the second time)

  I got the claim code to register my hp device connected for the second time and on both occasions, it doesn't have to be displayed in the devices tab.

  I tried a disconnection and logging into my account, but this has not solved the problem.

  I tried the two Chrome Version 39.0.2171.95 (64-bit) and Firefox 31.0 on a MacBook Pro running Mac OS 10.9

  Printer is an Office Jet 8610

  Web services are enabled and the printer is connected to the network.  I created the computer print jobs and they have successfully completed.

  * beep *?

  The problem disappeared after I checked my email address

• Why Windows Media Player suddenly not recognized my portable device even if the device is connected and is displayed in my computer?

  Until a week ago, Windows Media Player and my portable device of Sanza fuse got along beautifully when sudden WMP ceased to recognize the device.  This despite the fact that the Sanza is correctly connected and appears in the personal devices from my computer.  The Sanza even shows on its screen that is connected, but it's like OMP no longer sees it? Any thoughts? This who could I have inadvertently done to cause this painful ' divorce? Thanks for any help.

  Hi Cynthia,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you are facing a problem with Windows Media Player.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. are you able to play other files using Windows Media Player?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter in Windows Media Player and check if that helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Method 2:

  Try to uninstall and reinstall Windows Media player from Windows features and check if it helps.

  Enable or disable Windows features: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Error "no network access" on the devices not connected with hotspot Wi - Fi on Windows 8

  Original title: wifi hotspot problem not reciving data connected network - windows 8

  I have windows 8 simple ASP, when I do a WiFi hotspot it activate and connected to the iphone, lumia or tab, but the data are not recived by any device? they don't show error no network access? What is the problem?

  Hello Anwar,

  I wish to gather information to help you better:
  (1) where exactly you receive the error message "no network access? It's on the phone or the computer?
  (2) how do you have enabled connection with devices Wi - Fi hotspot?
  (3) you have problems connecting Wi - Fi hotspot on the computer?

  (4) you receive the same error message with all devices?

  If the issue is with Windows phone, post the same question in the forums Windows Phone for assistance. Check out the link:

  http://answers.Microsoft.com/en-us/WinPhone

  If you encounter this problem only with the computer, then respond with more information so that we could help you better.

  Answer us with more information that would help us resolve this problem more far.

• How to get a list of the devices USB connected

  Hello
   
  I am looking for a simple function in labview to progammatically for connected devices scan and list them.
  This application concerned the devices of all types: game controller, network, mouse, printer, storage media layout accessory...
  .NET offers a solution?
   
  Thank you

  Eric

  Find in french

  http://forums.NI.com/T5/discussions-de-produit-de-NI/Liste-de-p%C3%A9riph%C3%A9riques-USB/TD-p/19930...

• How is the device is connected to the USB 1 or USB 2 port?

  My motherboard has USB 1.1 and USB 2.0 ports, but it is impossible to determine which is which by Visual inspection.  I have hooked up a USB 2.0 device and wants to determine the port on which it is actually hooked up to.  I looked in the "Device Manager" but can't seem to find anything by having feature at the speed where the data can be transferred to.  I use Windows 7 x 64 Pro.

  My friend has a Mac and which hang the appliance up to its USB 2.0 port known then check system information, it clearly shows the device and data rate, which happened at about 480 Mbps of transfer.  It seems that this information would also be available in windows.

  Andy

  first read here http://en.wikipedia.org/wiki/USB#Colors

  Then download AIDA64 (free to try) and go to the devices section