How is the device is connected to the USB 1 or USB 2 port?

Similar Questions

• How a detector of fuel level on the USB/serial port to indicate the level of the interface?

  Hello!
  Im working on a project that contains a fuel level (capacitive sensor) sensor. My task is to connect the sensor to a PC and indicate the level of fuel on a chart. The instrument works with 1-wire communication, but Ive built a USB converter for it. So I want to plug it into the USB port on the computer and use Labview to access the fuel level. Its important, I need indicate level constantly, because the probe will build in a bus to see his level of fuel. I've never used instrument in LV control, that is why now wrote im.

  Please can someone help me build a VI to do this?

  Thank you very much
  Regarding.

  G. masseteau

  
  

• How make the USB auto-ouvrir its Nav Pane folder when I plug. Vista for this? __

  In the Navigation pane (what I call the directory root - no?), when I plug a USB key, I have to click on the folder "Computer" to open it, then the folder of USB stick to open that in order to be able to drag files from the hard drive to the files inside. The bookmarks bar is useless, it's just a subfolder in the "Favourites", just as boring the USB folder and is not yet open USB folder in the Nav pane. I can't find a way to make the USB auto-ouvrir its Nav Pane folder when I plug. Vista can do this?

  This is a Windows update that addresses the functionality of Autorun.  I don't know if it can solve your problem, but it can facilitate some of the following solutions or allow them to work if Vista is up to data: http://support.microsoft.com/kb/971029.

  Here's how to use Autorun with a USB Flash drive that can solve your problem (but it is a bit Advanced): http://www.samlogic.net/articles/autorun-usb-flash-drive.htm.

  Here is a free download which probably fix the AutoPlay in Vista and XP (when I insert my flash drive, a menu popss send me the optios including by studying the disk and when you click it it starts at the root of the drive, and I think that should happen with your USB key as well). http://www.mydigitallife.info/2008/01/15/cleanhandlers-free-download-autoplay-cleanup-utility-for-xp-and-vista/.  I don't know if this will help, but it may solve the problem.

  Here is another article with a procedure of activation autorum for USB drives.  I think you want to insert explorer.exe as filename to open Windows Explorer. http://www.pctipsbox.com/how-to-autorun-programs-from-usb-flash-drive/.

  Here's yet another article on how to set up automatic execution for a USB key: http://www.dailycupoftech.com/usb-drive-autoruninf-tweaking/.

  I hope that one or more of these items helps solve your problem and allow you to do what you want to do with the USB.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How configure the USB camera that is not image Directshow

  Hello

  I use NEITHER-IMAQ for USB to retrieve videos from DVC170 of Pinnacle's Dazzle. There is an error indicating the system error, see the attached file. Someone has replied that it is because my USB device isn't a directshow image. In fact, Dazzle DVC 170 connects camcorders with computer. He got out Svideo connection camcorder and a USB port, computer connection. In this case, VISA can be used to configure USB and take video? Thank you.

  Hi HxL,

  Of course, you can do the programming activex using your labview package. For more details, go through the examples.

  Thank you and best regards,

  srikrishnaNF

• How do the 5 server not listening on ports 80 and 443

  I want to configure an Apache Server on a Linux virtual machine (using the last VirtualBox) on my Mac running El Capitan 10.11.3.

  5.0.15 server is already running on the Mac (and I want to keep it, with the exception of web services). I have disabled the sharing in the web server user interface, but it was not enough, Apache listening ports 80 and 443, prohibiting VirtualBox to listen to them and transmits them to the Linux virtual machine.

  So I put comment out these lines in /Library/Server/Web/Config/Proxy/apache_serviceproxy.conf:

  #listen 80

  #listen 443

  8008 #listen

  #listen 8800

  8443 #listen

  8843 #listen

  After a restart, Apache seems not to listen to ports 80 and 443 more. However, VirtualBox does not become the listener. I tried this command in the Mac terminal:

  -i sudo lsof: 80

  and nothing has been returned, suggesting that something in OS X still prevents VirtualBox to listen to ports 80 and 443. If I try to convey some random host port of Mac to port 80 in the virtual machine, then I can my virtualized server access from Safari on the Mac host via the custom port said. But I would use the standard port 80.

  Any help really appreciated.

  Instead of commenting, assign a specific IP for the server listen instead of * (which means that all the IP addresses). This is only to the server on port 80 and 443 in this config file. I sometimes give an additional IP address to the Ether. Your Linux Machine can connect to the second IP address or the first initial assigned to your server depending on your configuration.

  Server is very aggressive in it's use ports, he leaves so all services to operate, even if you have the use of ports to other IP addresses.

  Leo

• I have 3 computer Aspire 5600U who noted starting with a USB 3 device plugged into the USB 3 port

  He did not become a problem with constant updates of Microsoft for Windos 10 check daily all 3 computers to see if the device USB 3 must be disconnected before the reboot may end.

  last 10 Microsoft Windows Upgrade installed yesterday and now, the problem seems to have resolved itself.

• Devices not recognized unless it is connected through a USB expansion port

  Came to use a scanner that was not used for some time and unrecognized device.  Tried reloading drivers, but still no good. Bought the new scanner/printer combo, but not recognized after loading software.  Finally managed to make it work via WiFi. Thought, I'd better try another material... iPOD touch... "unrecognized ', Sony e-raeder..." not recognized '... panic!  Has finally got the devices to be recognized by the connection via an expansion Belkin 4 port hub.  Any ideas on how to solve the problem of USB ports not recognize my hardware when connected directly.

  Have you tried to update the drivers from the chipset manufacturer of PC or motherboard manufacturers websites?

• I've lost 'use' of the USB 2 ports - why? Vista servicepak2

  I lost Adaptec USB (although it said it was working properly but he had the top yellow exclamation on device mgr /)
  The other is higher and I "m not sure what brand, etc.  I can't use the 4 USB ports.   Any ideas?  I have a Compaq Presario and all the stuff came with it...   I uninstalled both of them thinking they would reinstall when I rebooted, but not this time...   Help?

  Hello

  ·         Were there any changes made to your computer before this problem?

  Run the troubleshooter of hardware and devices at the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• ESXi 6 - unable to connect the USB device to VM

  Hi people:

  I have a problem with a specific USB 3 device to try to connect to a virtual computer.  The device is a Toshiba USB 3 5 TB hard drive, and it is recognized by ESXi I see when I do a lsusb command, but it is never offered as a choice available to connect to a virtual computer.  I tried to restart management agents, restart ESXi with the connected device so that it is immediately detected at startup.  I tried using the web client to vcenter server appliance and the native client C.  She just never appears as a choice just as if it is not there.  Other USB 3 devices, including a Startech gigabit network device and another 2 TB Toshiba USB drive appear as a choice, so it doesn't seem to be a problem with USB 3 devices as a whole.  I have connected to other computers and even an Arch Linux VM under the same ESXi which has a Startech USB 3 connected via PCI Passthrough controller and it works in all places.  I tried to connect to a USB 2 port just for the heck of it, and I got the same result (invisible to virtual machines) here is what information I have via the newspapers.  I see a few entries on the device being suspended in the vmkernel journal, but I don't know if it is normal for a device until it is assigned to a virtual computer.

  Any ideas what is wrong or how to fix welcome.

  lsusb

  lsusb [root@naplesesxi:/var/log] Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc.. Bus device 004 008: ID 0 b 95:1790 6 Electronics Corp. AX88179 Gigabit Ethernet Bus device 003 003: ID 2109:2811 Bus 004 Device 007: ID 2109:8110 Bus 002 Device 012: ID 1058:1003 Western Digital Technologies, Inc. Elements 1000 GB Bus 007 Device 002: ID 059b: 0277 Iomega Corp. Bus 004 Device 002: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS Bus 002 Device 003: Hub 4 ports ID Genesys Logic, Inc. 05e3:0610. Bus 004 Device 002: ID 0781:5583 SanDisk Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub Bus 001 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [root@naplesesxi:/var/log]

  lsusb detail

  [root@naplesesxi:/var/log] lsusb - v d 0480:d011 Bus 004 Device 011: ID 0480:d011 Toshiba America information. Systems, Inc.. Device descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (defined at the Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0 x 0480 Toshiba America information. Systems, Inc.. idProduct 0xd011 bcdDevice 6.07 iManufacturer 1 TOSHIBA

  iProduct 2 external USB 3.0

  iSerial 3 20140426016164

  bNumConfigurations 1

  Configuration descriptor:

  bLength 9

  bDescriptorType 2

  wTotalLength 44

  bNumInterfaces 1

  bConfigurationValue 1

  iConfiguration 0

  bmAttributes 0xc0

  Self-powered

  MaxPower 2mA

  The interface descriptor:

  bLength 9

  bDescriptorType 4

  bInterfaceNumber 0

  bAlternateSetting 0

  bNumEndpoints 2

  bInterfaceClass 8 Mass Storage

  bInterfaceSubClass 6 SCSI

  80 bulk bInterfaceProtocol only

  iInterface 0

  Endpoint descriptor:

  bLength 7

  bDescriptorType 5

  bEndpointAddress 0 x 81 EP 1 IN

  bmAttributes 2

  Transfer in bulk of Type

  Synch type none

  Usage Type data

  wMaxPacketSize 0 x 0400 1 1024 bytes

  bInterval 0

  bMaxBurst 14

  Endpoint descriptor:

  bLength 7

  bDescriptorType 5

  bEndpointAddress 0 x 02 EP 2 OUT

  bmAttributes 2

  Transfer in bulk of Type

  Synch type none

  Usage Type data

  wMaxPacketSize 0 x 0400 1 1024 bytes

  bInterval 0

  bMaxBurst 14

  Object store binary descriptor:

  bLength 5

  bDescriptorType 15

  wTotalLength 42

  bNumDeviceCaps 3

  Functionality of the USB 2.0 Extension device:

  bLength 7

  bDescriptorType 16

  bDevCapabilityType 2

  bmAttributes 0x00000002

  Link Power Management (LPM) taken in charge

  Feature of the superSpeed USB device:

  bLength 10

  bDescriptorType 16

  bDevCapabilityType 3

  bmAttributes 0x00

  wSpeedsSupported 0x000e

  Device can operate at full speed (12Mbps)

  Device can operate at high speed (480 Mbps)

  Device can operate at SuperSpeed (5Gbps)

  bFunctionalitySupport 1

  Fully functional low peripheral speed is Full Speed (12 Mbps)

  bU1DevExitLat 10 micro seconds

  bU2DevExitLat 2047 micro seconds

  Functionality of the device ID container:

  bLength 20

  bDescriptorType 16

  bDevCapabilityType 4

  Want 0

  ContainerID {14c4c0cc-6785-495d-8dcb-c74305d84121}

  Device status: 0x0001

  Self-powered

  [root@naplesesxi:/var/log]

  VMkernel when pluggin installed in drive

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB drive found, idVendor = 0480, idProduct = d011 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: new USB device strings: Mfr = 1, product = 2, SerialNumber = 3 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: product: external USB 3.0 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: manufacturer: TOSHIBA 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: serial number: 20140426016164 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0x81, slot 12, new flags drop id = 0 x 0, add new flags = 0x8 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: Add ep 0 x 2, location 12, new flags drop id = 0 x 0, add new flags = 0 x 18 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: xhci_check_bandwidth called for udev 0x4302ab3e2bc0 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: new context of input control: 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > xhci_hcd 0000:00:14.0: exit after config context successful ep cmd: 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: name of the vendor: 0 x 0480, product: 0xd011, revision: 0 x 0607 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: Interface subclass: 0x06, Protocol: 0 x 50 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) WARNING: LinScsiLLD: scsi_add_host:573: sgMaxEntries vmkAdapter (usb-storage) rounded up to 255. Indicated size was 65535 2016-03 - T 02, 20: 04:23.337Z cpu5:33148) LinPCI: LinuxPCI_DeviceIsPAECapable:581: device capable of EAP at 0000:00:14.0

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) DMA: 646: DMA 'vmhba50' engine, created using the Mapper "DMANull."

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb-storage 4 - 4:1.0: interface is claimed by usb-storage

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: device is not available for passthrough

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > usb 4-4: usbfs: registered usb040b

  2016-03 - T 02, 20: 04:23.337Z cpu5:33148) < 6 > hub 4 - 0:1.0: suspended

  2016-03 - T 02, 20: 04:23.349Z cpu0:32819) ScsiNpiv: 1505: GetInfo for adapter vmhba50, [0x4301a7966240], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  2016-03 - T 02, 20: 04:23.493Z cpu5:33105) < 6 > xhci_hcd 0000:00:14.0: xhci_hub_status_data: port polling station.

  2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended

  2016-03 - T 02, 20: 04:25.340Z cpu5:33111) < 6 > usb3 usb: suspended

  2016-03 - T 02, 20: 04:34.056Z cpu6:33107) < 6 > usb-storage 4 - 4:1.0: suspended

  2016-03 - T 02, 20: 05:15.869Z cpu4:162661) < 6 usb transfer > disabled

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3551: device rescan time 9 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:16.059Z cpu2:162686) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:16.150Z cpu1:162688) < 6 > usb transfer enabled; all eligible devices will be claimed by the kernel drivers

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3551: device rescan time 8 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3554: Filesystem probe time 11 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:16.235Z cpu6:162690) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:16.292Z cpu2:162691) ScsiScan: 836: vmhba0:C0:T0:L0 Path supports the REPORT LUN 0 x 11

  2016-03 - T 02, 20: 05:27.898Z cpu3:162776) CMMDS: CMMDSVSIUpdateNetworkCbk:2150: RECONFIGURE interface vmk3 with cmmds (success).

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3551: device rescan time 9 msec (total number of 5 devices)

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3554: Filesystem probe time 13 msec (devices surveyed 3 out of 5)

  2016-03 - T 02, 20: 05:27.921Z cpu3:162776) VC: 3556: refresh the time open volume 1 msec

  2016-03 - T 02, 20: 05:28.512Z cpu4:162776) Config: 680: "SIOControlFlag2" = 0, the old value: 0, (State: 0x0)

  2016-03 - T 02, 20: 05:32.679Z cpu0:162776) Config: 680: "VMOverheadGrowthLimit" = 4294967295, old value: 4294967295, (State: 0x0)

  2016-03 - T 02, 20: 05:34.612Z cpu6:162983) FixedMem TPM: start = 0xfed40000, end = 0xfed44fff, 0 = write protection

  2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) World: 15514: VC opID HB-SpecSync-host-9@0-3fda4c20-7-209f maps to vmkernel opID 73 a 64522

  2016-03 - T 02, 20: 05:46.397Z cpu7:162998 = 73 a 64522 opID) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)

  2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) World: 15514: VC opID HB-SpecSync-host-9@0-799bbb99-81-212f maps to vmkernel opID 478d4c8

  2016-03 - T 02, 20: 06:00.897Z cpu3:162786 opID = 478d4c8) Config: 680: "HostLocalSwapDirEnabled" = 0, the old value: 0, (State: 0x0)

  Hi guys, I just had the same issue and it resolved on my test environment.

  I got the device ID using "lsusb".

  Bus 004 Device 002: ID 0480:d011 Toshiba America information. Systems, Inc..

  where 0480:d011 is the device ID

  Then ran the following command:

  oddities s esxcfg-module = 0480:d011:i usb-storage

  After a reboot I was able to cross the device for my VMs.

  I'm not an expert in this field, as far as I can understand of this thread: problem mit USB Passthrough (eine andere nicht, geht HDD) - to vSphere5 / ESXi 5.0 5.1 - VMware Forum und "usb-storage" module crashes when you try to access the drive and does not pass through to the arbitrator of the usb. The person in this thread turns off the usb storage but I boot from USB and so I couldn't do it. Steal the idea of this thread: zero calorie tech deals: VMFS formatted USB sticks in VMware vSphere 5.1 I could exclude the USB from the usb-storage module device (I think).

  I have not tested how this affects other features, but initial test is positive.

• Transfer of data to my laptop via the USB port has ended

  Data transfer to my laptop (digital scale) via USB ends with the following message in the software scales: "an error occurred during the transfer of data, the device must be reconnected.  As this took place (worked before), can this be a problem with Windows Update?

  Hi Pahov,

  1. don't you make changes to the computer before the show?
  2. the problem occurs with any particular file/USB?
  3. What is the brand of USB?

  This problem may occur when there is a lot of traffic on the USB 2.0 hub, and you transfer files to a USB device or a low speed full speed. The problem does not occur when you transfer files to a USB device at high speed.
  Method 1: I suggest you try the steps from the following link:

  Problems may occur when you try to transfer files to or from a device is connected to a USB 2.0 hub
  http://support.Microsoft.com/kb/908673/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Method 2: I suggest you try the steps from the following link:

  How to troubleshoot USB device problems that can occur after a PC that is running Windows 7 or Windows Vista from sleep or hibernation resume
  http://support.Microsoft.com/kb/953367/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  See also the link: Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Connect new Macbook (USB - C) to dual-link DVI display?

  I have a new Macbook (12 inches, retina - love), with a single USB - C. I also have a (old) Apple Cinema HD Display that would like the dual-link DVI connector.

  How can I connect these two together?  It doesn't seem to be a combination of Apple adapters/connectors that will do the job for me.

  You must first of all the USB - C for HDMI av digital multiport adapter.

  http://www.Apple.com/shop/product/MJ1K2AM/A/USB-c-Digital-AV-multiport-adapter

  Then an adapter HDMI / DVI

  http://www.Apple.com/shop/product/MJVU2AM/A/Apple-HDMI-to-DVI-adapter

  Connect together and on the USB - C port adapters.  Then connect a cable to the HDMI DVI to DVI for the Cinema Display and the USB of the cinema screen to the av multi port USB - C USB cable.

• Connect MacBook 2015 USB - C for a DisplayPort 2560 x 1440

  On this page Apple says you can connect the USB - C port on my new MacBook to an output such as HDMI, VGA and DisplayPortvideo.

  

  I can't figure out how. The USB - C Digital AV card Multiport supports HDMI but not DisplayPort.

  Also I can't know if the port USB - C Digital AV card Multiport HDMI supports a resolution of 2560 x 14450 on a 27 "screen.

  http://www.MonoPrice.com/product?P_ID=12908

  http://www.Amazon.com/GP/product/B00X4S5DKC?gclid=CjwKEAiAkb-zBRC2upezwuyguQ4SJA DZG08v84XNxVcqP5buMiw6SNVPPtUD7xFmSlv22hSbqkDY2BoCnAzw_wcB

  http://www.Amazon.com/GP/product/B0155BR8BM/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=19446 87502 & pf_rd_s = lpo-top-band-1 & pf_rd_t = 201 & pf_rd_i = B00X4S5DKC & pf_rd_m = DER ATVPDKIKX0 & pf_rd_r = 0ZDJES9AK5XK6E7ARTJJ

  https://store.Google.com/product/usb_type_c_to_displayport_cable

• Qosmio G50-12 q - how to configure the devices connected to the USB mode standby

  Hello

  I wanted to use the PC sleep function.
  I also wanted to as devices that have been extinguished when in stand by.

  Once implemented this function the PC will regularly stand-by, but the device connected by usb are set on fire, any other master type, a device a usb wi.fi, etc.

  Someone told me that maybe some functions in the Bios only are not put in place to do that once entered the booth by the PC off all devices those connected.

  What checks and I have to perform in the configuration PC bios?

  How we in the bios? By pressing the keys on which?

  Thank you

  * valkyrie @ *.

  Please post comments if workaround posted by Akuma helped!

  It would be really appreciated.

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to register for an event when the device is connected to the PC in USB mode or sync

  I develop application on blackberry with phonegap.

  I want to hear event when the BlackBerry device is connected to the PC by USB MODE or sync.
  I saw mediagallery and applications Filemanager showing the dialogue that the application cannot be used when connected to the PC in USB mode.
  I want to display dialog similar to my request.
  Can anyone please help on how to do it.

  I saw blackberry webworks API

  public static Boolean blackberry.system.isMassStorageActive)

  who says if massstorage is active or not.

  But I can't keep on request this API every time. I'm looking for an API that gives me the reminder.

  Can you please help.

  On the side of Java, this can be done by implementing a FileSystemListener and the rootChanged method:

  public void rootChanged(final int state, String rootName) {
      if (rootName.equalsIgnoreCase("sdcard/")) {
          if (state == FileSystemListener.ROOT_ADDED) {
              /* SD Card is available. */
          } else if (state == FileSystemListener.ROOT_REMOVED) {
              /* SD Card is not available. */
          }
      }
  }
  

  I was not able to find a corresponding WebWorks API or API community well, so I think you need to create your own custom extension to implement this feature of the listener.
  https://developer.BlackBerry.com/HTML5/documentation/using_javascript_extensions_1866976_11.html

• How to read the data in a device connected to the usb port

  Is there a class or object, or the piece of code in Java that is comparable to the PDQComm32.ocx and the mscomm32.ocx used in VB6? I need to know how to read the data of a device plugged into the usb port of the BBerry. Is it possible to use the BB to read data from a device via a usb cable?

  I'm new in Java and I'm looking for the opportunity to write a project to read the data in a device with this program that can turn on a BB instead of on a pc.

  Thank you

  Did you watch net.rim.device.api.system.USBPort?

  That's what the doc says:

  Provides access to the USB port of the device.

  Avoid using this class in applications, as it is not portable. On the contrary, if you need to access the USB port, use factory CLDC Connector to serve a connection.

  Rab