Check out the parent of child instance Instance in a Split n.
HelloAnyone here know how to extract the instance parent (the one that is waiting to join) inside of an instance of child SplitN?
I have to control whenever other children (from the same splitn) arrived at the join and get information that these copies of approved in the parent instance. I thought to use a database to store this information and make the instance of child (i.e. not yet reached the join) get the information to the database... but first I'd rather use native resources (PAPI) instead. Is it possible to navigate from child instance in the parent instance and go get a few variables?
Thanks for any help
Luiz
Here's where I downloaded a 10g Oracle BPM project that does this: http://www.4shared.com/file/141374182/7d6009e7/SplitNLookAtParentInstance.html
Here's the logic within the Split-N (now called Mulitple in Oracle 10 g BPM) which examines the original instance variable data. Remove the statement "entry" before going into production. It has been added here for clarity.
bp as BusinessProcess
instF as InstanceFilter = InstanceFilter()
instances as Fuego.Papi.Instance[]
instanceDescription as String
parentCustomerName as String
connectTo bp
using url = Fuego.Server.directoryURL,
user = "AUTOCLIENT",
password = "P",
process = "/" + processName
logMessage "create filter"
create(instF, processService : bp.processService)
logMessage "set scope"
instF.searchScope = SearchScope(participantScope : ParticipantScope.ALL,
statusScope : StatusScope.ONLY_INPROCESS)
logMessage "setting parent number"
addAttributeTo instF
using variable = VarDefinition.INSTANCE_NUMBER,
comparator = Comparison.IS,
value = id.number
logMessage "getting instances"
instances = getInstancesByFilter(bp, filter : instF)
logMessage "loop through them"
for each inst in instances do
do
logMessage "Found it: " + inst.id + " in activity: " + inst.activityId
idFields as String[]
idFields = fields(inst.id,"/")
// is this the original instance?
if idFields[3] = "0" then
parentCustomerName = String(getVar(inst, var : "customerName"))
end
on e as Exception
logMessage "Exception: ->" + e.message
end
end
disconnectFrom bp
prompt as String = "Parent's name is [" + parentCustomerName + "] Enter a name: "
input prompt : customerName
using title = "title",
buttons = ["Ok", "Cancel"]
returning selectedButton = selection
Hope this helps,
Dan
Tags: Fusion Middleware
Similar Questions
-
Error "check out the printed put, put printed on may be printed incorrectly.
When I printed this time I got error "check out the printed put, put printed on can be printed incorrectly" when I test print this time only paper to jump, no printing ink on paper & I mentioned error came also. I have reinstalleddriver & printer spooler is restarted, cable also only checked no problems found but repeat same mistake. PSL help me more early like! possible, can you help me to find what parts of the printer is damage or nuisance os?... Please help me
Hello Vishnu,
You can try to follow the below link to check if the common issues with printer are the reason for the error message.
Solve printer problems
I hope this helps. Otherwise, feel free to brief us back for assistance.
Thank you
-
Check out the rest of the file persistent even if the feature is not enabled
I've recently implemented a few new sites in Dreamweaver CC 2015, using some of the same issues with old sites discover the features used. Well that Enable Check-out is not activated/checked in the tab advanced for these new sites, the lock icon is still on the local folder and opening files, I invited them as read-only, I want to make it writable. Sometimes I have a dialog box that indicates that "personA", which is to me, the extracted file. How can I remove features of extraction of these new sites? Furthermore, I am sure that this started after the upgrade to Dreamweaver CC.
Thank you, and any help will be appreciated.
Frank
It works:
attrib -r c:\folder\*.* /s
attrib
is the command
-r is
the flag to remove the read-only attributes
c:\folder\*.*
is the folder that you run it on more wildcards for all files
/s
is the flag to all subdirectories and filesIt does nothing hidden or system files, if maybe that's a problem.
All of my hair are now gone. Thank you much for the help, Murry!
Frank
-
My Check Out the form does not display the SSL certificate
Hi, the Adobe team
I'll put up my http:www.networkarte.com/store store, and I am currently giving some CSS to my Check-Out form. I don't see form SSL icon upwards in the URL field on my browser:
And I think that I should have something like this: .
Your help is more than welcome.
PD: I'm not a code guy, but just a designer. I apologize if my question is a mannequin.
Thanks in advance,
Diego
Hello
For some reason, you changed the URL of the form in an absolute url link:
-
Relative time with the Parent and child Comps
Hi, is it possible to see the time a child-comp has in her own scenario, and in his own timeline window see what time there in a certain-comps-chronology kinship?
I tried several views, but could not display 2 different comps and / or move the time slider to a model he moves in the other computer too...
Kind regards
Frank
Well, that said Rick is the first to check, but by default, this option is enabled, so I wonder... Your compositions are in fact really nested or y at - it something to do that we do not know? As well use the parameters of the model and adjust the com time beginning when necessary. Desp you can always use simple expressions for anotehr comp time and attach it to the effect numbers...
Mylenium
-
Problems with the Parent and child Pages...
I created a parent page with several pages of the child, but when I transferred to my host FTP pages do not come to the top in the hierarchy in the URL bar. I want it to be "www.website.com/parent/child.html" but they come as 'www.website.com/child.html '.
How can I change this? I thought that by creating a page parent to the child which would automatically when loading pages. Help, please!
Thank you!!!
Muse currently publishes all the pages in the root directory of the Web server. It does not create a folder structure based on the structure of the site defined in Plan view. The structure of the site defined in the Plan view is used by the Widget Menu to generate Menus correspondents and submenu entries.
Hope that specified in the query.
See you soon,.
Vikas
-
Hello world
Imagine the following configuration. The main SWF load a child swf file.
In AS2, I would use just _parent or _root to call the desired function. How can be done in AS3?
Is it still possible? Can I call a function on the main swf that loaded? What happened the other way around, this time of principal to the loaded swf format?
Thanks for the support!
See you soon
:::-)
In AS3, you can call the _parent (AS2) using MovieClip (parent) (AS3) and similar to the _root. If you load a child swf, you must understand that the child normally lives in the charger you loaded with, so to return to the loaded swf file you have to go (parent.parent) MovieClip.
So much to talk to the child going to swf, go through the following discussion... http://forums.Adobe.com/thread/720211?TSTART=0
-
Need help with a self-join select the parent and child
Hi all
I have an OFFICE table that will hold the Oncology, district and division of the hierarchic is Oncology-district-> division >
I want to list Oncology, district and division with its parent of the value of the followingprovinc district division A NULL NULL A A.A NULL A A.A A.A.A
I need your help.-- Create table CREATE TABLE OFFICE ( SLNO VARCHAR2(20 BYTE), OFFICE_NAME VARCHAR2(20 BYTE), PARENT_SLNO VARCHAR2(20 BYTE), TYPE VARCHAR2(2 BYTE) ); ALTER TABLE OFFICE ADD ( CONSTRAINT OFFICE_PK PRIMARY KEY (SLNO) ); ALTER TABLE OFFICE ADD ( CONSTRAINT P_C_FK FOREIGN KEY (PARENT_SLNO) REFERENCES OFFICE (SLNO)); INSERT INTO OFFICE (SLNO, OFFICE_NAME, PARENT_SLNO, TYPE) VALUES ('1', 'A', NULL, 'PR'); INSERT INTO OFFICE (SLNO, OFFICE_NAME, PARENT_SLNO, TYPE) VALUES ('2', 'A.A','1', 'DT'); INSERT INTO OFFICE (SLNO, OFFICE_NAME, PARENT_SLNO, TYPE) VALUES ('3', 'A.A.A', '2', 'DV');
Thank you.
Published by: Dipabkar Banik (DB) on June 13, 2011 12:17 AM
Published by: Dipabkar Banik (DB) on June 13, 2011 12:18 AM
Published by: Dipabkar Banik (DB) on June 13, 2011 06:45
Published by: Dipabkar Banik (DB) on June 13, 2011 06:47Try this
SELECT CONNECT_BY_ROOT (office_name) provinc, DECODE (LEVEL, 2, office_name, PRIOR office_name) district, DECODE (LEVEL, 3, office_name) division FROM office CONNECT BY PRIOR slno = parent_slno START WITH parent_slno IS NULL
-
Check out the Photos (target disk mode) files
Unfortunately, it seems that my iMac is damaged and I am in the middle of the tent back up all my files. The iMac won't boot to the top, and it looks like it might be a problem with the graphics card or the logic board. I can access Mode without failure, but it's pretty unusable due to the fragmented picture and lines on the screen. However, I was able to use the iMac with "Target disk Mode" for use as a hard disk.
So, as I can not open the Photos app I was wondering how I can recover the files it contains? If I copy my file from the library on another computer I will be able to use / access that previous files I had saved in Photos? My understanding is that the files are stored somewhere in the library? I do not use iCloud!
Most of the things I want to back up are in the files that I can just slide through a macbook via firewire, but I worry about what the other files I might lose (what I forget). Pictures is the only app I can think where are stored the files differently I use however.
It would be great if someone can help with this, thanks in advance
Usually Yes
The best solution is to restore you last backup to another computer, since it is a full disc and not affected by problems with your main computer - this is why you should always have a good current backup
If for some reason that doesn't work then just drag the photo library to the other computer and save it to the top of there
Extract the files is a last resort because you lose everything except the original photos - all editing, any organization, etc - your original photos are in the folder of the masters in the photo library
LN
-
Check out the current programmatically tab when you use the tab control
Hi, I'm kinda a n00b.
I have 10 tables of data and I want to draw these 10 berries on 10 separate charts. I don't want to clutter my screen so I made a tab control, with a tab for the path of each data table. But I don't want to trace all at the same time, I want that each parcel having its own button "trace data" so that the user can customize the trace for each of these options.
I could do with 10 pieces of code with 10 different buttons, but as I said I hate the mess, so I prefer to put all this into a business structure by which according to any tab the user has selected, when they press one 'plot data', labview gets data appropriate and plots as a result.
Now, I know that the tabs are indexed and I can return at any time to any page given by using the property Node--> Pages, but I need a way to retrieve the index of the currently selected page. Once I have that, I know how to do the rest.
Is this possible?
Thank you
Jessie
It is exactly what it seems that there is a terminal on the schema that represents the tab. On the front panel, right click and select 'Find the Terminal'.
Here's the code 8.0.
-
If possible, how can retrieve you the document must be signed a previously sent (last year) form? We love reuse and without having to recreate everything.
Hello Carolineh87007492,
From now on, it is not possible to extract the original document of the already signed document. My recommendation to create a library template that can be reused for future use.
-Usman
-
AS the title says. Any help would be appreciated. Thank you.
This camera model does not appear to be on the list of supported devices.
-
Check out the previous profile custommization
Hello
I'm cloning a virtual machine, and I know a previous admin created a file customizaction you know to add all the information th for virtual machines.
Now I want to clone that VM and since there are too many profiles of customization... is it possible to know how customization has been created and saved for this virtual machine since I need to use it again for my new VM clone
I add a picture in the case where I did not explain myselft on profile customization
Thank you very much
What I see on the screenshot:
(1) profiles became a garbage heap
(2) it happened because they have no descriptive name and descriptions of empty
You must delete all profiles and do it with the new descriptive names and good descriptions. If you really need as many different profiles, - I suggest you to have descriptions on paper too.
Or you can take a look at all the existing profiles, rename them and make good descriptions.
I seriously doubt it can be followed the profile has been used some time ago and I doubt that it worths the time to study.
---
MCSA, MCTS, VCP, VMware vExpert 2009
-
Several files running and check out the script files
I'm pretty new on SQLDeveloper and am not aware of its advanced features. I'm trying to get some help here to make my task easier.
Here's what I'm trying to do:
Run a lot of .sql files individually and save the results in a file.
Is there anything SQLDeveloper that allows me to do this?
I know that it is to be a wish, but it would be great if the output file is in excel format: P
On a more serious note, can SQLDeveloper be run from the command prompt? Perhaps we could write a batch file to run then.
Waiting for help on this.OK, it's
spool d:\agustin\out1.txt @d:\agustin\script1; spool off spool d:\agustin\out2.txt @d:\agustin\script2; spool off spool d:\agustin\out3.txt @d:\agustin\script3; spool off spool d:\agustin\out4.txt @d:\agustin\script4; spool off
Out1.txt
58 ---------------------- 58 create table correcto. CREATE SEQUENCE correcto.
OUT2.txt
100 rows inserted commited COUNT(1) ---------------------- 100
OUT3.txt
drop table example1 correcto. drop SEQUENCE example2 correcto.
OUT4.txt
I Drop the Table I Drop the Sequence
. :-) to help with my English is wellcome :-).
-
How get/check out the time portion of timestamp with time zone?
Using Oracle 10 g, I have a timestamp with time zone.
We have treatment that uses hourly (as a shift of the day of treatment). I want to 'get' the time contained in a timestamp, so that I can compare it to one of our differences for example (pseudocode)
If the time in the timestamp = 0 then
treatment of midnight
on the other
do other hourly treatment
FI
I thought that "extract" was the right way to get the time portion of the time stamp, but it returns an interval based on UTC - so where I could expect
SELECT extract (time OF THE TIMESTAMP ' 2009-06-08 00:34:56 Europe/London ') FROM dual
to return to 0, it is actually 23 since it's time for the time zone UTC.
Then... How should I be getting time in order to have it make 'sense' in the context of its time zone? I simply use to_char and analyze the time part?
Thoughts?
--
AndyNot the literal timestamp ' 2009-06-08 00:34:56 Europe/London ' specifies TIMESTAMP (9) WITH ZONE TIME, subsequent DISTRIBUTION converts this TIMESTAMP value (6).
Maybe you are looking for
-
iOS 10 no sound from the speaker of the ear or EarPods
After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my
-
Update error Code 80070570 Windows 7 (KB974431)
Cannot install the update - Windows 7 (KB974431) error Code 80070570On opening session, says to run chkdsk - how do you go in Windows 7?Basic device drivers missing (2) in Device ManagerCD/DVD player not reading discMedia Player inoperable
-
A year ago, the right side of the printed page was fuzzy when printing in color. (the black and colors were neither Kaleidoscope) I called HP and was told that I needed a new printer, but I came to buy more cartridges so I changed the controls in or
-
Hello I would appreciate it if you could answer me solution for the following error which is constantly computer to boot. Can you please advise me how to solve it. Respect, Roshan
-
Hotmail does not load...
my hotmail does not load up, just a blank page and its showing its busy. If anyone can help...