Check the availability of the internet

Similar Questions

• "Connection error. Check the Internet connection. »

  I just installed my printer (an HP CM2320fxi upgrade). Everything works except ePrint/Web Services. The printer is connected directly to my router. It prints network computers. AirPrint works from iOS devices. It can scan to e-mail and documents are properly received by mail outside the network accounts (i.e. it must be connected to and talk to the internet). All the router firmware and the printer has been confirmed to date. all devices have been reset and restarted several times. However, if I try to activate HP Web Services for ePrint installation, I get the following error message: "connection error. Check the Internet connection. »

  After struggling with this issue for many months, including many discussions phone and email exchanges with technical support from HP, they finally sent me a replacement printer.  It works as advertised right out of the box.  I don't know what was the underlying problem, but the fact is that he couldn't be corrected with one of the solutions proposed in the discussions on this forum.  Apparently, there's HP printers out there with a lack of internet connection has nothing to do with a solution that is configurable by the user.  If you have one, then you will need to replace your printer.

  I can't thank HP for that.  They tried my patience and tenacity of the months before offering the only real solution.  They must know their products better than that and should have replaced my printer several months ago.  That being said, the tech person with whom I had most of my relationships, it was a nice guy.  I expect he's working under an edict on exhausting all possible tactics before agreeing to replace the unit.

  Good luck!

• HP LaserJet Professional P1606: HP Web Services Installation - connection error. Check the Internet connection.

  I try to activate the Services Web of HP but connection error. Check the Internet connection. .

  I use the static ip address with the address of the preferred DNS: 8.8.8.8 and 8.8.4.4 and it does not work.

  I changed to DHCP as it does not work.

  I have a ZTE home modem router connected to the printer.

  The link below should help you.

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903

  Kind regards

  Oliver

• "Connection error. Check the Internet connection. "When you try to enable Web Services on HP 1606dn

  Error message "connection error. Check the Internet connection. " When you try to enable Web Services on HP Laserjet 1606dn.

  Operating system: Windows 7

  Thanks for the help,

  Howard

  Last UPDATED 21/07/13: after upgrading the firmware to the latest version, I could enable web services. Great help has this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw

  Thanks for trying to help.

  In my case, it did not help.

  I followed the instructions on this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw.

  The key was the update of the firmware, I think.

  Walter

• Microsoft fix Setup error + check the internet connection?

  I try to install the microsoft fix it and when the installation starts there was a mistake that check the internet connection

  Hello

  ·         What fixit you try to install on the system and why?

  ·         You are able to access other Internet sites without any problem?

  ·         What is the exact error that you are experiencing?

  I suggest you to check if you have turned on the proxy server. Follow the steps mentioned below.

  1. in the Internet Explorer Tools menu, click Internet Options, click the connections tab and then click LAN settings.

  2. in according to groups of servers Proxy, click to select the use a proxy server for your LAN check box.

  3 address , enter the IP address of the proxy server. (Note: Please try the same content with your "work PC' type)

  I suggest post you your query in the Fixit support forum to get help.

  Microsoft Fix it Center - NOT for general support questions

  http://social.Microsoft.com/forums/en-NZ/fixitcenter/

  Also, I suggest you to refer the links below.

  http://social.Microsoft.com/forums/en-NZ/fixitcenter/thread/0c5b0e4e-341F-468d-B2E4-6709c5df0198

  http://social.Microsoft.com/forums/EU/fixitcenter/thread/6278e447-a2aa-4380-9467-5e331d0723cf

• How can I check the internet connection?

  How can I check the internet connection after the launching application?

  Method or property with the value true or false.

  Thank you!

  You don't have to see the 2nd answer, discuss blackberry.system.hasDataCoverage

• Laserject 1606dn error, "connection error. Check the internet connection. "during activation ePrint

  I try to turn on my LJ 1606dn ePrint. I downloaded and installed the firmware and that is okay. I went to the Web Services tab to get the code to register the printer. When I click on 'Activate' in the ePrint section, I get the error, "connection error. Check the internet connection. "My connection network and internet are working properly. Am I missing something? I need to open a port on my router? Is there a special song, I need reciting under the full moon while sacrificing a live chicken?

  Thank you

  Joe

  jfusco,

  If you have an IP address manually, assigned to the printer:

  1. Enter IP address of the printer in the Web browser address bar and press ENTER.
  2. Go to the network tab and the IPv4 Configuration of the page.
  3. In the DNS server settings, the entry in your domain DNS servers or put IP of the router Address in the preferred DNS server and 0.0.0.0 or 8.8.8.8 in the section auxiliary DNS server and apply the changes.

• How to check the internet configuration

  trying to access my World of Warcraft game, it says unable to connect Launcher, check the internet configuration

  The message means just what it says.
  You can find something useful on the page linked below-

  http://Windows.Microsoft.com/en-GB/Windows-Vista/setting-up-a-home-network

  Default - a post in the "Networking" and on-line forum may be a better option. Include some details - what kind of modem you are using, the i-net connection speed, and any other details you think may be relevant.
  You can get more suggestions on this forum as well once you've posted more details.

• Unable to connect to internet guard telling me to check the internet connection then starts to run a diagnosis

  my PC guard loss of connection to the internet, it comes to check connection that cannot display this web page, but my connection is fine.

  Hi penny,

  -You use a wired connection or wireless?

  Follow the steps listed in the article mentioned below:

  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

• Cannot check the Internet using my WRT54G2 V1 router.

  I have Blue Ridge cable Internet.

  I can connect to the internet perfectly by directly connecting the cord to this laptop that I am.

  I ran the CD for my WRT54G2 V1 router, and at the end of the installation it says my router is configured, but he said that it was not connected to the internet.

  I tried several times to fix this in troubleshooting, but none of them worked.

  I DID however just simply disconnect and reconnect the router after about 10 attempts and I've been on the internet for about 20 seconds. (I looked for something on google and found research.) But internet is turned off and it just says "Local".

  I want to connect to the internet using this router and thus be able to connect the members of my family with their laptops through this router.

  Thank you.

  Configure your router for Internet connection

  CLICK HERE for instructions

  To configure a router Linksys with cable Internet Service

  Make sure you follow the mac cloning procedure because it is the key

• Check the internet connection

  Hello everyone, I am applying, and I want to know when the phone is to have internet
  I tried with this code:

  Lo solucione with onError {}

  Thank you

• Trial download - error message, check the internet connection

  I am trying to download a trail for Photoshop Elements, its application to connect and then when I try it gives me an error message to check my internet connection!

  I am logged - please help!

  Connect you or activation errors

  Mylenium

• Re: Unable to connect to the internet

  Hello

  I don't know if there is a security problem, but hopefully someone will be able to help!

  A few days ago I tried to download a program of security norton on my computer, but I have problems with download it and felt he formulated my laptop run very slowly, then as soon as I had it installed I uninstalled. I was able to access the internet after this point, but then when I tried again shortly after that I was unable to connect. I tried all the usual things to try to get reconnected. In the network and sharing Center, it seems that I am connected, there are no blocks anywhere. I also watched the firewall and I don't see that there is a firewall anywhere that doesn't let me connect. I don't understand why I can't connect at all! If anyone has any advice I would be very grateful!

  Thank you

  Jessica

  Hi Jessica

  And when you remove Norton there is no problem with the internet connection?

  If you want you can do follow s:
  Remove Norton, check the internet connection and if everything works well install Avira Antivir Personal.

  I use it for years and it works perfectly. We know that Norton can slow down the operating system. Avira is much better.

• HP Office Jet Pro 8600 more. Do not print on the internet

  Hi all

  Today, my printer decided to "throw up" an ontop empty page of the Web page, I tried to print.

  I asked the printer in the right hand mouse button menu drop-down, then 'print '.

  Then the white page appears. You can check the internet on the edges.

  Print my docs and photos.

  Maybe I have changed something in the settings of this morning, but I don't remember what I did?

  Someone at - it ideas? I hope so. Thanks Redocean

  Hi @Redocean

  I might be able to help him, but it's not really something HP is supported. I found a video that asks you to remove Softonic, as well as a link with the following instructions to help you reset Internet Explorer. I think that might help.

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• WRT54G - cannot connect computer wired to the internet through a router

  I have the WRT54G and unable to connect to the internet when you are going through the router.  I feel that I've checked everywhere can, but still does not work.  I connected the way the instructions, the lights are on the case and all that.  I have cable internet and when I plug directly, there is no problem.  When I try to 'ping' to check the connection between my computer and the router, I get "Request Timed Out".  I tried to reset the router and goes in this direction, but I can't go beyond checking the internet connection through the router.  Any ideas what I'm missing?

  Thank you!

  You should not use the installation CD at all.  If you throw it away.

  See here for the installer of cable.