Cannot check the Internet using my WRT54G2 V1 router.

Similar Questions

• Cannot access the internet using the account invited in Vista. Unable to access using the administrator account.

  This one is strange - and I repeat that the problem is that I can't access the internet by using the administrator account.  The guest account works fine.  All programs are there and launch the fine (IE, Live Messenger, Yahoo Messenger, etc.), but they cling right there when I try to log on or access to any Web site.

  While in the administrator account, I ran "CMD" in the run menu and can ping Yahoo, Google, etc. with success.  It's embarrassing - any ideas how the administrator account can act that way then the guest account works perfectly?

  Hello Allen LaBrune,.

  If you are able to ping the websites from the command prompt, it means that your computer connectivity is fine.

  ·         What is the antivirus installed on your computer protection software?

  ·         Have you tried to browse by disabling the firewall?

  Try disabling the firewall on the computer and check if you are able to navigate.

  If this does not work, reset Internet Explorer settings and check if you can browse.

  To use the feature reset the settings of Internet Explorer in the Control Panel, follow these steps:

  1. exit all programs, including Internet Explorer (if it is running). 2. If you are using Windows Vista, click Start, type the following command in the start search box and press ENTER: Inetcpl.cpl The Internet Options dialog box appears. 3. click on the Advanced tab. 4. Under Reset Internet Explorer settings, click Reset. Then click again on reset. 5. when Internet Explorer has finished resetting the settings, click close in the reset Internet Explorer settings dialog. 6. restart Internet Explorer. For you reference, you can visit the link for the following Article: http://support.Microsoft.com/kb/923737

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access the internet using a wireless connection via ATT Uverse using laptop computer with Windows XP

  My wireless Internet connection has stopped working when I converted to ATT DSL to ATT Uverse.  My laptop sees the network and says I'm connected with all the green "bars".  However, when I try to connect to the internet I have two things to happen.  Either I get a long period which ends with the message that I can't connect to the network.  Or - I can connect to the internet for a very short period of time - a part of a screen is displayed and then crashes.  I entered the codes of security several times to ensure accuracy.  How to solve this problem?

  Hello, I am an AT & T technician. It is a known problem with the NVG589, Microsoft Vista and XP.

  You can find more information, including possible workarounds for this problem here:

  http://www.att.com/eSupport/article.jsp?SID=KB92052&CV=820#fBid=6vEbMNmgXBq

  If anyone has additional information, I would certainly appreciate it. A tech, the fix for this issue is important.

• Connection to the internet using a Verizon Wireless router

  I have a Compaq Presario CQ60-210US running Vista 32-bit Service pk2 with an Atheros AR5007 802 Wireless card. 11b / g. I have problems to connect to the internet through a router with WPA-2 Verizon Wireless. I can connect to the wireless router, but it will not connect to the internet through it. I am able to connect wirelessly through other routers wireless without any problem. All solutions?

  Problem was with the wireless card Atheros who need an updated driver. Found a newer driver on a Czechoslovak website. Downloaded and intalled and solved the problem.

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• After the HP update cannot connect to the Internet using my ISP wireless

  I have a HP Pavillion15 Notebook PC, Prod #: E7C83AV using Windows 8. Hp yesterday made an update, and subsequently, my computer does not connect to the Internet, using the same network wireless ISP.  Only way I can get Internet is to use the DSL unit to the computer USB cord.  I had a "Configuration for Invalid IP (106)"

  My ISP is still in my system with the same password, and I can't find any reason why it does not connect.  I have all the correct lights on my computer & the DSL unit.  I have not contacted my ISP, do not know what to say "After HP did an update, your service will not work?"

  Tonight I tried to get help from HP, big whoopie, even when I'm in warranty for 9 months, I was transferred to HP/SmartFriends, who told me that I had to pay for the assistance.  It won't happen!

  I don't know what to do now, I'm not very computer savvy and if HP won't help, do not know where to turn now.

  I'm fighting mad now!

  Someone please help.

  Have you tried to restore to previous work image?

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Need help to connect my ibook G3 to the Internet using Airport

  Hello
  I recently bought an Ibook G3 and unable to connect to the internet using Airport. I can find my internet provider and it allows me to enter the password for it, but after I have get the same message:
  "An error has occurred all trying to join the selected airport network. -3151.
  the password is correct, so I don't know why its not connecting.
  I checked the map, and everything seems OK.

  the Ibook is a Mac OS 9.2

  version Mac OSZ1 - 9.2.2

  Help, please! -J' I feel like IM going crazy trying to get it to work

  .

  Older hardware uses a different protocol and the later models of wi - fi security, so

  It may be that the unit is able to see the signal available but not able to use it or connect.

  In order to set up an AirPort Base Station wireless vintage separate from any modern

  wireless local area network is a way to use a less secure configuration wireless computer older

  and without compromising the latest systems which would share a reduced security wireless

  If you want to reduce the overall security of the system (using the old protocol WAP,

  WEP, etc.; drafters WPA2 +) and base stations can be more difficult if they

  also have more than one type of signal. Older computers use less bandwidth.

  At this point, I cannot possibly be a great help; short of reading thanks to my favorites

  old pages (and check if the pages still work online) reference to use the installation program.

  My setup wireless WPA2 but earlier use AirPort Express base; and also have older

  base station AirPort Extreme 54 k White orb on-site; but not currently enabled.

  To have an additional wireless hardware for use with vintage computers.

  Good luck in this case!

• Vista Home Premium gives the message "linked to limited accessibility" and I cannot access the internet.

  I have Vista Home Premium and trying to connect to a WiFi spot, I get the message "linked to limited accessibility" and I cannot access the internet. I understand this is common for Vista and there is a fix for this problem, but want to make sure that I get the right one and can't seem to find anything referring to this issue on the Microsoft site

  Hello

  This problem happens only when connecting to a particular place for the WiFi?

  You can follow the suggestions and check out them.

  Method 1

  You can read the article.

  Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".

  http://support.Microsoft.com/kb/930517

  Method 2

  Disable IPv6.

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Method 3

  Temporary disable your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  You can reset the TCP/IP stack.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Error message: Windows cannot access the specified device path and the second user cannot access the internet

  Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

  The second user cannot access the internet. Can't access window appears. The other user is not problems.

  Hi Rickravel,

  1. what type of account you use?

  2. This only happens when you access Internet?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  Step 1:

  You can start in safe mode with network and see if the problem occurs in the account.

  You can see the following link to start in safe mode with network.

  Start your computer in safe mode

  Note: Restart the computer to boot into normal mode.

  Step 2:

  If you use Internet explorer, then you can try to disable add ons and check if it helps:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

  How the modules of the browser affect my computer?

  Hope this information is useful.

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• When I am browsing the internet using Safari and I'm looking for something like a plumber he gives met with responses from an area not my own.  How can I change this?

  When I'm surfing the internet using Safari looking for a product (like a plumber) all my suggestions come from the vicinity of Tyler, Texas.  I live much closer to Dallas.  How can I change that.  Thank you!

  You have location services? Are you allowing access from Safari to your location? You must check in the settings > privacy > Location Services > Safari Web sites. If she knows exactly where you are, then you can get these errors.

  I'm sorry, I just realized that you were referring to the Mac computer. My answer was for an iPhone. I can't help you with the Mac.

• HP 15 laptop: laptop computer is connected to the wi - fi connection, but cannot access the internet

  Hello

  My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?

  Thanks in advance.

  Hello @jerome256,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you are having a problem with your WiFi and wanted to help you!

  You are trying to access WiFi through router?  If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router.  Check that the router is connected to the internet.  If you have more than one router, then you can ensure that you are connected to the correct router.  You can also try unplugging the router for about 30 seconds, and then reconnecting it.  Please consult the following document, as it can help solve the problem for you:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Windows cannot check the updates - C800044E error code

  Hello

  Since yesterday, I get a notification icon in the taskbar indicating that windows cannot check the updates. If I click on the icon and then click on the button "check for updates" in the new window, the search end reports that an error has occurred and the error code is C800044E. This happens every time after the computer starts and when I try to manually check for updates.

  The operating system is Windows Vista Home Premium 32 bit with OEM license.

  I already googled for this error code, but none of the suggestions found during the search worked. Mode by default with no results, I installed the MicrosoftFixit50202 (have not tried yet aggressive mode). I ran the malware Microsoft Windows (without threats found) removal tool. I downloaded and installed manually the KB947821 update for vista, also without results.

  The last successful update is dated more than a month previously, and I assume that at the same time, some important updates may appear. Can someone help me with this problem?

  I've already solved the problem by using the system restore (I used a restore enjoyed a week point).

  I'll answer your questions anyway, in which case this may help solve one similar problem to others:

  1 Vista SP2 (all updates important/critical installed as of October 1, 2010)

  2. Eset NOD32 antivirus/antispyware with current subscription. No third-party firewall (just the windows firewall).

  3-4. I have never installed a Norton or McAfee application on this computer, but I'm not sure if a trial version of Norton AV is pre-installed with this computer (if it did, I removed it when I originally set up the computer - almost 3 years ago).