Check the disk does not start if he had to run when you restart the computer.

Similar Questions

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• Vista will not load and continually reboots, recovery disk does not start.

  I have a Dell with vista on it. Recently, it has automatically installed an update and now it does not load Windows at all. It goes to the screen where I have the opportunity to "start in safe mode" "safe mode with command promt", "last known good configuration" etc. and none of these work options (all start loading them upwards and then the computer restarts just itself).

  I tried to put in the cd of installation for vista, but it won't start. I changed the options in the BIOS so that it starts from the CD first, but then it just goes to another blue screen that says: there was some sort of system faliure, and the only option is to restart the computer.

  I also tried to connect an external dvd player to see if he was not playing the disc because of a defect in material, but the same thing happens.

  I also tried out the RAM and it put it back again (a single website suggested I try this).

  Nothing seems to work! And now, I am out of options and have no idea what to try next - help!

  http://support.Dell.com/

  If it does not start where install Recovery DVD from Dell, you will need to contact Dell at the above address.
  As you say, you have changed the boot on the appropriate drive order and still nothing

  It would seem that you have a deeper problem that just a straight reinstall the problem.

  See you soon. Mick Murphy - Microsoft partner

• My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

  My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

  The photos are not stored on the sims, sorry.

  You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

  Recovery mode:

  Turn off your iOS device.

  Plug charge cable to the computer only (not to the device yet).

  Open iTunes on your computer.

  Hold the button to power on your device and do not let go.

  Plug the cable into the device while keeping the power button.

  Wait for the computer to detect the device and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• My iphone does not appear as a device in itunes when plugged into my computer, how can I solve this

  My iphone does not appear as a device in itunes when plugged into my computer, how can I solve this pls help

  https://support.Apple.com/en-us/HT204095

• Win 7 repair disk does not start

  H8 1380 t CTO, Intel i7 3820 processor. 10 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
  Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, the Radeon HD 7570 1 GB graphics card.

  I need some advice:

  Can you direct me to a HP solution or tell me what I'm doing wrong?

  I opened Control Panel - backup and restore and set up a backup schedule Win 7. Created a backup drive, and according to the instructions, a system image on a separate hard drive. This has been created successfully.

  I have so successfully by the operating system, created an ERD in Windows 7 bootable, the screen guests said that this disc could be used to start the computer when you cannot start the operating system due to serious errors. This disk allows you to restore the system from a system image created using backup and restore or use other recovery tools to correct the problem that prevents windows from starting.

  The system does not start on this disc. I did two restorations of the factory and went through the steps above, five times without success.

  When you try to start the system with the Windows 7 repair disk the following steps were taken:

  1 Win7 disc repair, system rebooted, you press ESC, selected the Boot Manager, select DVD disc and received the following message: boot nonsystem disc error.

  2 rebooted system. escape, Startup Manager, then selected sata2 with no luck. Same error message as in (1).

  Thank you

  Hi Dave,.

  Thanks again for your help.

  Bought a WD a terabyte HD Executed a copy sector by sector, using Paragon... It was quick (about ten minutes-amazing) and I answer to you, now, using the WD HD clone.

  Awesome! I finally took possession of this computer.

  I would say that the problem has been resolved. Windows 7 repair disc will not work on EFI systems and here's workaround.

  Thanks again.

  Jack

• Recovery disk does not start

  I'm helping a friend with his HP CP61-313US laptop. Somehow, it's not boot from the hard drive. It attempts to load Windows, then crashes, gives me the black screen where you can choose the safe mode, safer networking, etc.

  He will not start in safe mode or other options. It does not start from the last good configuration.

  I ordered the HP recovery discs and disc inserted one of the stimulus. It won't boot from the CD. I went into the bios options and set the CD drive as the first option. I did both of in the settings BIOS F10 and F9 startup command settings. I hear work the CD player, but he keeps trying to boot from the hard drive.

  I never get a message that says something like "press any key to boot from the CD-ROM."

  Is there anything else I can do to force startup from the CD/DVD?

  Is it possible that I can copy this HP on a flash drive recovery myself and try to boot from a flash drive. I guess it is possible that the DVD/CD player is broken. My friend who owns the computer used rarely to the reader.

  Is there some other bios setting I can use? Either by the way, I ran the memory and hard drive diagnostics and they passed.

  I have determined that the DVD drive on this laptop is bad or is about to fail. I tried to create a Windows repair CD and was able to read the CD. It would give me the message "Press any key to boot from CD or DVD" that I was not getting with restore disks factory HP. I put restore HP factory disks in another computer and tried to copy them. I thought that, perhaps, if my drive was any failure there is something on the factory records it would not read but maybe a freshly burnt disc copy can read. It would be almost from the start. He would try and then getting errors of e/s on the copied version of the disc. I came to the conclusion that I could find other uses for a drive DVD external USB and since they were only $40 I have advanced and bought a. I now restore since the original HP recovery discs successfully using the external DV

  Key USB D. I had to upgrade the bios to boot from the DVD USB drive, but it seems to work. So you can consider my original request as 'resolved', but I can't speak for other users who have hung on this thread. But if someone has trouble with their discs original HP, I would suggest trying to make a copy of their, and maybe a copy will work. The copy almost worked for me.

• No keyboard, no blocked on Windows 8 and Windows 8 boot disk does not start

  I have a 15 inch Macbook Pro mid 2013 (I think, I can check if it helps). There are 2 days that the SPACEBAR on my keyboard broke. I hear there as soon as I turn on my laptop it is still active as if I am pressing on it and as soon as I get to type anything, by pressing any other key on the keyboard, the EEG SPACEBAR take off and won't work at all. From what I could tell, it's an electrical problem with the contacts on the keyboard and after going a TI repair shop, they said that the only solution is to change the keyboard altogether. In the meantime, I bought a USB keyboard.

  I am also under Windows 8 in Bootcamp and I left it usually automatically connect to OS X and I just use the Alt key at startup when I go into Windows. However I have noticed that since the space bar is stuck and active at startup, I can no longer press Alt to change Windows, I decided to change the automatic boot from OS X to Windows disk and restart thinking I could just repeat the process when I am done going back to OS X. But for some reason unknown, Windows 8 will not start, just of takes me to the windows icon and freezes. Sometimes a message saying "Prepare the automatic repair" will appear under the icon of windows, but it is still frozen. Now I'm stuck in this boot sequence and I can't switch back to OS X since the Alt key will not work.

  Now my questions are: is there a way to switch partitions in the boot without a keyboard? Or is there a way to cut completely from the Mac keyboard and use the USB, one instead? Or even a way to break the contact of the space completely bar so stop because I change the keyboard completely in any case and it would be just a temporary solution? Thanks for any info!

  If the battery on your Mac has inflated because of charge cycles, it can push against the keyboard, causing its functioning. Have you checked the battery to abnormal expansion?

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• My vista restore disk does not start in my computer. Is it possible to get a new drive?

  Compaq PresarioSR5130NX with AMD Athlon 64 x 2 processor. Wouldn't start. Console Startup Repair did not help, not even in safe mode. Tried to restore partition, says error. Tried to restore System Restore disk. First authorized disc formatting my drive, second disk would not be executed. Now I'm stuck with no operating system and no disc to recharge. Any ideas?

  Hello

  You may have a hardware problem which is the cause.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  Read this HP information;

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  See you soon.

• Acer Aspire M5 w/Windows 8 - e recovery system disk does not start

  My M5 of Acer one-year-old has failed and now I have a blue screen that says "the Boot Configuration data file is missing some required information, File: \BCD, error code: 0xc000000d.» I ordered an e recovery disk that was supposed to solve the problem. The instructions say "Insert system disk labeled disk," "restart the computer and press F12...» "When I do this, the tracks of the disk of the system for a minute or two, stops, and a minute later the laptop stops. I don't think the system disk is accessible to all. My Acer is two months out of warranty... it's so frustrating. The advice is much appreciated!

  Just an update... Blayn was very helpful and directed me to the Acer support. The problem has been resolved by directing the bios to boot from the hard drive instead of the hard drive. It was a little difficult to achieve... I couldn't have done it without the excellent guidance and support from Acer. My Acer has worked very well since, and I appreciate help in this forum!

• I'm using a MAC with the current software. I am trying to download Adobe Flash Player. My password does not work. I ' v reset my password and restarted my computer. I need help with my password at the bottom of load.

  I'm on a MAC and my password does not work, I reset my password and I can not even download Adobe Flash Player.

  This password is presented by your operating system and is designed to prevent you from accidentally installing the software.

  If it comes to your personal computer and you don't need a password to connect to the computer when it first starts, you can probably leave the password blank and click OK to go to this prompt.  If it comes to your personal computer and your normal password does not work, make sure that CAPS LOCK SHIFT is off, and then type the password carefully.

  If this is your work machine and he asks an administrator password, well, you will need to have a conversation with your computer friendly.

  If you are still puzzled, you may need to reset the password on your Mac:

  http://support.Apple.com/kb/PH18653

  http://support.Apple.com/kb/PH14325

  http://support.Apple.com/en-us/HT201240

• Install ESXi 4.1. the local disk does not start

  I installed ESXi 4.1 successfully. on a local disk, a HP Server 8 Gen. However, the startup fails; I see the initial ESX charger on the screen, then I get this error message

  Kernel: b.z bootUUID =...
  Loading B.z
  No specified favorite video mode.
  Module: k.z
  Loading k.z
  Module: s.z
  Loading s.z
  PANIC: Error reading from file: s.z - 3.
  boot:

  I tried to reinstall, but I get the same message

  anyone experienced this? any help would be appreciated.

  What installation image that you use (VMware or HP)? For models of Gen 8 Server, HP provides an install image updated (ESXi 4.1 Update 2) to https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM06

  André

• HP recovery disks does not start in my HP Pavilion Dv7

  I have a HP Pavilion dv7 that I have to wipe clean due to spyware. I bought the HP system recovery DVD and on them it says "to start, insert the disc into the optical drive of your computer and follow the on-screen instructions." Unfortunately, I insert the disc, and I get the info from the upcoming disc, but no instructions. I even tried to make the laptop run from the disk drive at first upward. When I did he asked me to create system recovery discs. I didn't need to make them, I have them from HP. Just frustrated about why the HP drive are not following the instructions.

  Here is a picture of the screen I get when the disc is inserted:

  

  I really hope that someone can help me that I've been waiting to do this for weeks, since I had to wait for discs.

  Thank you

  KC

  You are the very welcome, KC.

  If you can not boot from the DVD, it may indeed be a bad disk.

  Also, make sure that you have disk 1 in the first to start from.

  And Yes, you should get a very brief message to hit any key to boot from the CD, then watch carefully for it.

  If you miss it must start over and restart the PC.

  Paul

• Satellite C650 - internal flash disk does not start

  Hello

  I need help

  I have a SDHC 16 GB
  I installed an operating system on it.

  When I boot from sd usb adapter it starts without problem by selecting usb or floppy drive in the boot menu (F12 at startup laptop)

  When I try to boot from USB internal it boot doesn t
  I tried every option start there is

  I installed the operating system while he was in the internal flash player that the sd card is recognized by the operating system once started

  Thank you

  > When I try to boot from USB internal it boot doesn t
  What do you mean exactly? You are not able to boot from the internal HDD or what?