Check the file C: System! I swear I fix one thing and get another!

Similar Questions

• Check the file system on C or registry cannont load the hive!

  Ok... I have a Dell Vostro 1510... all of a sudden, I can't on this laptop!  I have Windows XP Professional.  It lights up when I choose to start windows... I am said to be:

  Checking file system on c:

  The type of the file system is NTFS.

  Volume label is System.

  Then, when it starts to run it says: CHKDSK checks the files (step 1 of 3)... it happens to 47% finished and that's all!  It won't do anything else, it just stops!

  If I have to cancel the verification file system I get this message:

  STOP: c0000218 {Registry file failure}

  The registry cannot load the hive (file):

  \SystemRoot\System32\Config\System

  or its log or alternation.

  It is damaged, missing, or not accessible in writing.

  I do not have the disks provided with the laptop or I will say that I can not find them... I read a lot of these forums but none I saw helps me!  Because I can not enter and try to run anything!

  Thanks for any help in advance!

  I see you mentioned do not have all the disks with the laptop and maybe it's that he came not with any, because the installation files are likely in a hidden partition.

  but try to borrow a winxp cd and boot with it.

  then in the window settings pitch repair to start the recovery console.

  then at the prompt of disk, run the following >:

   

  Chkdsk /r

  Chkdsk /f

   

  then exit, remove the cd and restart the computer.

   

  the above commands are redundant, but nothing wrong with double controls.

   

  In addition, if you receive a following error on boot sector, then run via the recovery console fixmbr.

   

   

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

  .

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Please give me the number of hash MD5 to check the file .iso from win7

  Please give me the number of hash MD5 to check the file in win7 because when I try to install win7 (after dload web) its saying some files are missing if please check the files and restart the installation process. so I need to check the file I downloaded is full or not

  Please send me the file md5 hash as soon as possible

  Windows 7 RC Build 7100 x 86
  File name: 7100.0.090421 - 1700_x86fre_client_en-us_Retail_Ultimate - GRC1CULFRER_EN_DVD.iso
  Size: 2.35 GB
  MD5 Hash: 8867C13330F56A93944BCD46DCD73590

  Windows 7 RC Build 7100 x 64
  File name: 7100.0.090421 - 1700_x64fre_client_en-us_Retail_Ultimate - GRC1CULFRER_EN_DVD.iso
  Size: 3.04 GB
  MD5 Hash: 98341AF35655137966E382C4FEAA282D

• After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  After that the effects cannot continue: error when access to the files instead of inside "/ users/me/Library/Preferences/Adobe/After Effects / 13.8", if it please check the file permissions and try again.

  [Fixed spelling - Mod]

  Go to the folder listed in the path and change the permissions to read/write. Do you know how? It is in the info file.

• "Error when access to the files of preference... Please check the file permissions and try again.

  I tried installing After Effects test and received the error message:

  "After that the effects cannot continue: error when access to the files instead of inside" / users/Kelly/Library/Preferences/Adobe/After Effects / 13.5 ", please check the file permissions and try again. '"

  I'm unable to check file permissions because the file path does not exist.

  I'm on a 2013 15 "retina Macbook Pro running OSX 10.9.5

  Premiere Pro downloaded successfully. After effects will be not open and wont let me start a trial (he thinks I've already started?)

  

  Thanks for any help that is going can offer!

  kbombcarpenter To access this file reference the steps mentioned on help below link, user library folder is hidden by default.

  Access the hidden user library files. Mac OS 10.7 and later versions

• How to check the file for the virtual machine size Esxi shell

  Anyone who can tell me how to check the file for the virtual machine size Esxi Shell. I tried this command-h ls but does not work.

  Have you checked "ls-lh', it will provide information as the attached screenshot." "

• Check the file size before downloading

  Hi there guys...

  I'm having a problem at the moment... How can I check the file size before being transmitted to the server?

  I was given a task to check if the file size limit is 500 KB and then block the download and warn the user.

  According to my colleague from work... This is not possible with Javascript or Ajax... is there another method I can use?

  kindly help... Thank you

  It is a good answer, but it is interesting to note that Flash Player is itself a control ActiveX (when run in IE). In short, you need something beyond code that runs directly in the browser to do this. It can be done with just HTML and JavaScript in a web page.

  Dave Watts, CTO, Fig Leaf Software

  http://www.figleaf.com/

  http://training.figleaf.com/

  Fig Leaf Software is a small business Veteran - Owned (VOSB) on

  GSA Schedule and provides high caliber of the authorized seller

  instruction at our training centers, online, or on-site.

  Read this before posting:

  http://forums.Adobe.com/thread/607238

• Adobe still the software that is used to decode the media is not available on this system. install the correct decoders for the file you are editing can help fix the problem

  Hello

  I got this message after the import on ten H.264 files that I coded for Adobe media encoder.  "It is not available on this system from adobe yet the software that is used to decode the media. install the correct decoders for the file you are editing can help fix the problem. »

  The files that we have shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with always the same error.

  I also tried a new project and after about ten or so files imported into a timeline, the breakdown of the system.  I tried twice...

  Thanks in advance

  Please report to us. I don't know the exact specifications. for stills in still, the limit is 4000 pixels in the largest dimension for PrPro.

  Now, I must add that in PS. resizing algorithms are better, in my opinion, than those of PrPro and again. This means that there is nothing to gain and quality of untying, important images much larger than the size of the frame of the project, i.e. of 720 x 480 for NTSC SD projects yet. The size of the image will be the limiting factor, so scratch that.

  Even in projects PrPro, I resize to exactly what I need. If I will not pan on a zoomed image, I resize it to the size of the image of the project. If I move on a zoomed image, I resize just what I need.

  Good luck

  Hunt

• all the file (Application) has changed how to fix .exe type

  all the file (Application) has changed how to fix .exe type

  Hi Jonathan Charly.

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  
  Method 2: run the fixit available in the link below and check if that makes a difference

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  What happens when the photo of system library is on an external drive and then the system creates a library of Photos? How do merge you them?

  Your library system can be on an external drive, if the drive is Mac OS extended (journaled) format and mounted on-site.

  But you must be careful, your external drive is always connected and available before the Photos and to import new photos.

  If Photos opens a different library, news, you can switch to the library on your external drive by double clicking on an external library. You can have several libraries, no problem.

  But pictures don't have any tools to merge libraries. You can switch between libraries, then open them alternately.  To merge two libraries export the photos of the smallest library and import the photos exported in the largest library.

  Or use third-party "PowerPhotos" to move photos between libraries.  But the merger is not supported in the free trial version. You must purchase the full version. You can download it here: Fat Cat Software

• Apple watch ever the size of the file download updates? I have little download caps and would like to know the size of the file before downloading. Also to take advantage of free download period... is 02:00 until 08:00 a way to schedule download

  Apple never shows the size of the file download updates? I have little download caps and would like to know the size of the file before downloading. Also to take advantage of free download period... 02:00 until 08:00 is there a way to plan downloads?

  Yes. Informed of an update, select "install tonight". The downloads will be scheduled to occur at 02:00 local time.

  Make sure that your MBA is connected to the power of this night there.

• The files I have on Photoshop CC can be converted and edited on a MAC? [was: PC to MAC]

  I'm interested in changing from PC to Mac.  The files I have on Photoshop CC can be converted and edited on a MAC?

  There is no difference - I work at home on my Mac, I wear my Windows Surface Pro autour with me to teach - completely smooth. I run my copy of CC on both computers. The days of questions between the platforms are long over.

• My CS 4 has ceased to recognize the file Raw CR2 for my Canon 5 d MkII and G12?

  My CS 4 has ceased to recognize the file Raw CR2 for my Canon 5 d MkII and G12?

  Run the Creative Suite cleanup tool, reinstall. However, according to the tables below, your G12 files should not be readable in CS4 at all.

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  Mylenium

• Cannot print the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL was not loaded"

  Original title: "Prop Res DLL not loaded".

  Try printing the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL not loaded" How can I load it? Typically get this message when I print review copy. My system is Windows XP.32 bits

  Hi Robert,.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2. which antivirus app do you use?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Let's uninstall and reinstall the Lexmark X 1185 printer drivers.

  To uninstall the printer software, see the following link.

  http://support.Microsoft.com/kb/307895

  
  

  Restart the computer, visit the following link and install the printer drivers.

  http://support.Lexmark.com/index?ProductCode=LEXMARK_X1185&page=product&searchID=1368834464501&locale=en&UserLocale=en_US#1

  If the method above does not work, follow the steps in the next method.

  Method 2: Error Message When you try to print or save a document in OneNote 2007 or in Word 2007: "Prop Res DLL not loading" or "Cannot load Library DLBAPRP.dll"

  http://support.Microsoft.com/kb/918730

  Note: suggested above steps are applied to your scenario as well.

   
  

  If you have additional problems, please reply to this post and we will be happy to help you further.

• I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  Hi Dan, try to run the cleanup (helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) tool to completely uninstall CC to your computer, and then reinstall the desktop app: creative.adobe.com/products/creative-cloud