Check the HBA on ESXi firmware/driver

Similar Questions

• How to check the HBA firmware in vSphere?

  What is the CLI command to check the HBA firmware? I can only find orders for 3.5. Thanks in advance!

  Check the/proc/scsi/qla or lpfc

• How to check the NUMA on ESXi host node

  Dear team,

  I have cisco ucs Server Blade configuration below b - 200 m3. I want to know how to check the NUMA on ESXi host node.

  RAM: 192

  Socket 2 (8 cores).

  concerning

  Mr. VMware

  Unfortunately, it seems THAT NUMA is disabled hardware wise. You can only activate it via the BIOS setting.

• Find the version of the HBA Qlogic HP firmware

  I have new HP BL460c ESXi 6.0U1 servers.  I looked in the directory/proc/scsi /, but there is no record of qlaxxx version.

  Can we all up to me how to find my version?

  Thank you

  Check if help: audit HBA Firmware and driver in ESXi 5.5 | VMware-Pro

• At the same time, my 'display driver no longer' & Firefox crashes. Any relationship between those 2 events?

  Every day or two, when I wake up my Windows laptop, 8 of the screen saver, the screen remains dark, sometimes for several minutes or more, and then he comes back and shows a message: "display driver stopped responding and has recovered. Display driver Intel graphics accelerator driver for windowos 8 (r) stopped responding and has successfully recovered. "After searching on Google, I see that I am far from alone to receive this message.

  But ALSO, when the screen finally wakes up, Firefox broke down (most of the time).

  So what is happening here? What's the causal problem? Or are they the two results of something else? It cannot be just a coincidence that they are together, it can?

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• This virus on the computer or removable flash drive?

  Vista Home Premium 32-bit with SP2 for Vista

  Insert a flash drive into the PC. Showed a car 'J '.

  My Norton Internet Security detected W32. Downandup.B and quarantined it.

  In addition to quarantine the file, my security also seems to indicate 2 register of fasteners

  He showed the infected as file

  j:\RECYCLER\S-5-3-42-2819952290-8240758988-879315005-3665\jwgkvsq.vmx

  So that means my Internet Security detected on the Flash drive? Or on my hard drive?

  Hello

  If j is a Flash drive which is where the malware was found. Use the below to check the
  Key USB and hard drive for malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I check the version of the firmware on the optical drive on Satellite P200

  I am a Satellite P200 and my Tempo suggests to download an update of the firmware to TO35, which only works if I TO33/34, how can I check that I have? I tried searching on my machine, but I guess that the firmware is not the thing to appear in searches. Any help would be appreciated, thanks in advance!

  Hi guys

  > How to check the firmware
  You can use a 3rd party program like Nero to burn.
  Nero presents the version of current firmware of CD/DVD players

  The firmware TO33 or the TO34 should already exist on the TS-L802A drive.
  Please check if you have exactly the same drive. TO35 firmware only works with the TS-L802A.

  If you have an older version of fimware as TO33 then please post here again!

  *@Voodoo*
  You really have a TS-L802A drive. ? How did you check the firmware version?

• How to check the version of the HBA firmware?

  Hi, do you know how to check firmware of ESX console or other HBA (without restarting the host)

  Thank you.

  just looked at your screenshot. It gives you a 1.91A5 firmware

  Is it not what you wanted?

  By the way information on these files vary with the HBA you have.

• check the depth of the HBA q

  Following the instructions of 1267 KB: VMware KB: change the depth of the queue for Brocade HBA QLogic and Emulex chains of command to change the queue depth queue unit logic of the HBA number listed, as well as the string to verify your changes.

  When you try to check for recent changes to the queue depth using the command, I'll have nothing else to empty values in the output upward.

  Here's him copy / paste of KB:

  Run this command to verify that your changes have been applied:

  # esxcli system module parameters list -m driver

  Where driver is your module driver adapter Emulex, QLogic and Brocade, such as lpfc820 , qla2xxx , or bfa .

  The output looks like:

  Name                        Type  Value  Description
--------------------------  ----  -----  --------------------------------------------------
.....
ql2xmaxqdepth               int   64     Maximum queue depth to report for target devices.

  HOWEVER - I get no return values, the example in the watch 64 KB, but when I run the command on my hosts, it is empty.

  Is this a new bug?  does anyone know another way to retrieve the values?

  Most likely you see not all outuput, could be due to the drivers PROVIDED with Windows.

  Run the command and check the device queue depth value = 0x40, which will be the HEXADECIMAL value

  / usr/lib/VMware/vmkmgmt_keyval/vmkmgmt_keyval - a

• Install the HBA drivers for ESXi hosts

  We currently have a plan to install a new system with our spare essentials vCenter license, Emulex HBA cards in the DELL gear that we will make our ESXi hosts.

  
  How to configure adapters HBAS in ESXi, can we recommend has someone already installed drivers Emulex HBA in an ESXi host?

  
  Defining the ESXi host should not be a problem, but it is just to install the drivers in ESXi I'm stumped.

  What version of ESXi, you install? Check the VMware HCL for IO devices and if you HBA is compatible, try to do a default install and maybe the ESXi will recognize and load the drivers without having to do any additional setup.

  VMware Compatibility Guide: search for i/o device

• How can I check my HBA firmware?

  I have a dl380g7 HP with ESX 5.1 and need to know which firmware is required for the HBA? were find this inf?

  Oh, I get it. You want this link:

  VMware compatibility guide

  http://www.VMware.com/resources/compatibility/search.php?deviceCategory=IO

  Also, I tend to see here for driver/firmware combinations

  Driver supports for the I/O cards firmware versions

• check the size on hard drive mail account

  Hi all

  small question. Is it possible to check the size occupied on the disk by mail accounts?

  Thank you very much!

  Greetings jfs - dev,

  Thanks for posting here in Support of Apple communities. I see you are eager to see how much space to use on your Mac mail accounts. I'll be more than happy to help.

  Your profile says you have El Capitan, so for you, you can locate the Mail folder in your library to estimate the storage it uses. Here are the instructions to find this file:

  1. open Finder

  2. click on the 'Go' and 'Go to Folder' drop-down list and type "~ / Library /" without the quotes and click on 'Go '.

  3. find the "E-mail" folder, right click and choose 'Get Info'

  If you have MacOS Sierra 10.12 new version, it's a little easier:

  1. click the  button and click on 'about this Mac'

  2. click on the storage tab

  3. click on 'manage... '. »

  One on the page manage the it will break your storage and show you the storage used by the Applications, Documents, iBooks, iCloud Drive, iOS, Mail, Photos, Trash, and system files.

  Have a great week!

• HP Photosmart 7525: How to check the version of the firmware of the HP PhotoSmart 7525 is up-to-date?

  How to check the version of the firmware of the HP Photosmart 7525 is up-to-date? And where can I go to download the latest firmware?

  Hello

  Follow these steps to check the update of firmware for your printer:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/document/c03312867/

  Note: the printer must be connected to your network to check the updates, if it is connected with a USB key follow the steps in the tehse to connect the * beep * to your wireless network:

  1. In the wireless menu, tap Settings.

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no dound I did a windows update, but no sound came through, please help me

  Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d

  the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song

  Thanks for any help

  Hi, Pantha9,

  What version of Windows are you using?

  Start > right click on computer and select Manage

  Select Device Manager

  Click on the + next to sound, video and game controllers

  Right-click on the driver and select uninstall

  Restart the computer and Windows will reload the driver

  New attempt of his

  Access the site of the factory and search for driver updates