LifeCam Studio must adjust settings to each Windows session
Each time before use twinkle 'Lifecam Studio' I have to adjust all the settings like Zoom, 50/60 Hz and others...
Savings by apply and OK is effective only during the Windows session...
Is there a way to save these settings to a new desired adjustment? ...
Thank you Jaime
Hi Jaime,
Thanks for the reply.
We are happy to know that your problem has been resolved.
You are always welcome in our community for other issues related to Windows.
Tags: Windows
Similar Questions
-
He doesn't let not my son starts a game that he bought and downloaded from a secure site and he told us that it software is not recognized by a Windows program called DEP (date execution prevention) and cela can be solved by adjusting the settings. We do not know where yet the DEP program. Can someone help us please?
Make a right click my computer, properties, Performance - the Advanced Settings tab, Data Execution Prevention tab.
Make sure it is on turn on DEP for Windows essential and services only.
http://i.imgur.com/iuGsgnf.PNG
If this does not work, there is a way to disable to boot.ini but first tell me the game and site where it downloaded the game.
-
Hello.
Any one out there know how to activate the display settings for each folder in WINDOWS 7?
I'm especially interested in adjusting the size and the location on my screen. A few days earlier, before moving to Windows 7: I could open a file, place and size where I wanted, and when I opened it again, presto!, even spot and size.
I've seen several posts of users seeking to turn this feature off. I'm looking forward in opposition. I would like to than windows "remember each folder view settings. This particular configuration seems to no longer be available in Windows 7, screenshot attached:
Thank you for your time and your interest.
Best regards
Fernando
Have you tried the solution here:
"The changes in the size, view, icon or a file are lost.
<>http://support.Microsoft.com/kb/813711/en-us >
HTH,
JW
-
LifeCam Studio on Windows XP SP3 problem
LifeCam Studio on Windows XP SP3. Connection camera after installation of the software (driver). Not dedect camera. Error code 28. Massage: "the installation of the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor. "Windows Vista on the same PC works fine.
Tried all Microsoft directed - no luck.
Help, please!
Yuriy
Hi YuriyBelitskiy,
- Did you the latest changes on the computer?
- What are the steps you tried to solve the problem?
- When was the last time it was working fine?
See the article and try the steps mentioned, check if it helps.
Troubleshoot failures to find the new LifeCam hardware
-
OT: Online backup.
When I try to use quicken backup, I get this message: online backup cannot update its settings in the windows registry. Your connection profile must support access to the registry to be able to use the online backup. Please run the Setup program by using the run as Administrator option. How can I do this?
Right-click on the file and choose Run as administrator.
-
Hello
My lifecam studio worked pretty well, but I kept getting a message saying something about the requirements is not enough
but it was the path in front of the requirements. but I was going to upgrade my CPU when even if I upgraded from AMD Phenom II x 4 965 140 Watt 3.5 Ghz
to a Phenom II x 6 1100T 125 watt 3.4 Ghz after this update the lifecam studio software will not launch if it dose it stops a few seconds
and said he met an error inform Microsoft of this error. I can use the webcam with other programs like adobe flash media live encoder
and other streaming broadcasters. but I can't use it by its self like to take a photo or video to upload to youtube, things like that.
It does not work with Skype, yahoo messenger, Microsoft, live video chat sites or programs. I was told that I had to update the bios I did
but which has not helped with the lifecam studio, but with other hardware and software. I have the AMD Phenon II x 6 1100t clocked at 4.4 GHz
and that did not help ether are my Nivida GeForce 260 SLI graphics card OC HD 3D ready I have 8 GB memory 1000GO drive hard windows XP
SP3 gigabyte mother board everything is new, less than a year less than 6 months old... I put the AMD Phenom II x 4 965 at the back of the computer
and the software worked as he did before. but I need the AMD Phenom II x 6 1100t I play a lot of games on my PC and I also live stream
at the same time and the AMD Phenom II x 4 956 clocked to 5.2 GHz could not keep up.
I hope I have not confused anyone, but I wanted to give as much info as I could to help him.Thank you!
I discovered what the problem was.
It is the combination of XP a 6 core CPU and the Lifecam software, they do not work together.
To get the lifecam to launch, I have to go into the Task Manager and click on process and then right-click on the exe lifecam, then click set affinity, and then unslect 2 carrots to make lifecam think that there are only 4 hearts, then it works fine. The only downside is: you must do this every time you want to use the lifecam.
-
HELLO I HAVE A PROBLEM CAN YOU HELP ME? each window in the colorfull mozzila browser places
each window in the square and flashing colorfull mozzila browser
However since this was instructions for the office, in order to disable in mobile:
- You may need to disable this option in the Android settings you Tablet:
Android Settings > Developer > Show screen updates
-
Install LifeCam Studio offline
I have recently loaded several LifeCam Studio webcam on XP SP3 machines installation.
However, the only problem that occurs is that the installation wants to an available internet connection to install the necessary drivers, even if I download the executable file of the product support page.There is workaround to allow offline installation? The customer that I install these cannot allow an available internet connection on these machines, for security reasons.Hello
Installation requires Internet access to connect to a specific server from Microsoft.
See the link.
http://support.Microsoft.com/kb/973297
See also the link.
-
How can I change my default settings so that Windows Explorer, downloads, etc., all open to the folder I chose instead of "libraries.
Here is an article on how to change this folder opens when you click on an icon in Windows Explorer:http://www.watchingthenet.com/how-to-change-windows-explorer-icon-to-open-a-diffierent-folder-in-windows-xp-and-vista.html. I think this will do the trick. Otherwise, maybe the following can help (but I think that's the answer you're looking for).
Here's how to change the default template for a folder:http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html. Default behavior is to select the model based on the first type of file placed in the folder (you must choose something). Vista sets thefolder type template according to what are the types of files in the window and the settings display window Explorer. This will show you how to resetthe Windows Explorer folder view settings, disable Automatic folder Type discovery and increase theview of the folder cache to have Vista don't forget display settings, model of file type, size, or position of a specific window for when it was still closed to the location of specific path. Keep in mind that it works, just a generic and holistic - it will not work for individual folders by folder. That cannot be done in Vista. But you can create shortcuts to the folders that you want and add to the desktop or right-click
It does not work with the Sub record under, Open with,open in a new tab (Internet Explorer), etc... dialog windows of type through the goodFile menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free programhttp://autosizer.en.softonic.com/to resize them.
Here is another article on how to modify the columns in Windows Explorer and sort in Vista:http://www.vistax64.com/tutorials/108665-column-customize.html. This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.
Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided:http://news.cnet.com/8301-13880_3-10019957-68.html.)
I hope this helps in your situation.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
LifeCam studio resolution is immutable 160 x 120
I don't know when it happened but my lifecam studio resolution is immutable 160 x 120. He has no other option of 160 x 120 resolution and works in 160 x 120 in other programs like Skype. He used to work well in other resolutions
Here's my dxdiag System Info:Time of this report: 21/08/2011, 16:23:50Computer name: RED-PCOperating system: Windows Vista? Home Premium (6.0, Build 6002) Service Pack 3 (6002.vistasp2_gdr.110617 - 0336)Language: Japanese (regional setting: English)System manufacturer: gatewaySystem model: GT5622BIOS: Default system BIOSProcessor: Intel (r) Pentium (r) Dual CPU E2160 @ 1.80 GHz (2 CPUs), ~1.8GHzMemory: 3070 MB RAMPage file: 1530 MB used, 4843 MB of available spaceWindows Dir: C:\WindowsDirectX version: DirectX 11DX setup parameters: not foundDxDiag Version: 7.00.6002.18107 32 bit Unicode---------------Display devices---------------Card name: NVIDIA GeForce 9500 GTManufacturer: NVIDIATrack type: GeForce 9500 GTDAC type: Integrated RAMDACThe device key: Enum\PCI\VEN_10DE & DEV_0640 & SUBSYS_064810DE & REV_A1Memory display: 2287 MBDedicated memory: 1007 MBShared memory: 1279 MBCurrent mode: 1920 x 1080 (32 bit) (30 Hz)Monitor: Generic PnP monitorName of the driver: nvd3dum.dll, nvwgf2um.dll, nvwgf2um.dllDriver version: 8.17.0012.7533 (English)DDI version: 10Taken BGRA supported: YesDriver attributes: Final retailThe pilot/size date: 25/05/2011 02:09:05, 11992680 bytesWould be WHQL logo: YesDate stamp WHQL:The instrument identifier: {D7B71E3E-4500-11CF-036E-44261FC2C535}Vendor ID: 0x10DEDevice ID: 0 x 0640SubSys ID: 0x064810DERevision ID: 0x00A1Revision ID: 0x00A1Video Capture sources:Microsoft LifeCam Studio, 0 x 00200000, 1, 1, LcProxy2.ax, 3.60.0250.0000Device name: Microsoft LifeCam TMJoint: 1Controller ID: 0 x 0Suppliers of products/ID: 0x045E, 0 x 0772FF driver: n/aHi iDarkEden,
· Have you made changes on the computer before this problem?
· You receive an error message?
I suggest you put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.
Also uninstall and reinstall the lifecam software.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
For reference:
http://support.Microsoft.com/kb/973297/en-us
-
LifeCam Studio has stopped working after the firmware update?
Hi all.
I bought one of the new LifecamStudio 2 days ago. I installed the camera, following the instructions of course. At the end of installation, I was able to get my self in the window of the Lifecam software, up to now, no problem, the device worked. Suddenly, a pop-up message will appear, telling me that the firmware of the device should be upgraded, then I pressed OK. The update of the firmware started but was abandoned shortly with an errormessage, saying the upgrade was not successful. I tried to reinstall the firmware, but now he tells me Hat I have the latest firmware installed. The nproblem is therefore now that, when I instert my camera in USB port windows find the camera, but as soon as I start any program it uses the camera he's leaving a Lifecam icon (in the hardware Manager that is) to an unknown unit. Software Lifecam studio told me that there is no camera installed. I installed the camera on other computers without a bit of luck.
/ Stefan
Fixed it :)
In the Device Manager under imaging devices I've seen "Webcam" - before the botched fw update, it said 'Microsoft LifeCam Studio' and was a diff driver. I rolled back the driver (or if it does not work you can force it to use one of the program files \ lifecam) then reinstalled lifecam - my cam works now. Now - what's the problem with this update utility and why it changes what is driving the camera uses? -
LifeCam Studio works with laptop, not the Office? (Pilot questions)
I have a LifeCam Studio that works with my Acer laptop but does not work with my desktop computer.
Skype and ManyCam on the desktop, suffice to say that the unit is used with another program. I uninstalled and reinstalled the program and the driver manager devices, as well as the uninstall and reinstall the LifeCam software.
In my laptop Device Manager, the camera returns as LifeCam and a composite device, but on the desktop, it only installs under imagery as "webcam."
Any ideas?
Hello
If another application has control of the camera it is not available for use by others
programs up to what he was released by the control program. Usually, the camera will
be released when you close a program. Check in the Task Manager and close the program
If shown, or restart. Some messengers has control of the camera, so you would need
to ensure that the program has closed before the unit would be available for use
in other programs.See the section "" I see the following error message: the camera is in use by another program "article."
Troubleshooting: Webcams
http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-SetupYou can also run the troubleshooting of devices & integrated utility and check the issue.
Open the hardware and devices Troubleshooter http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Let us know if it helps. If the problem persists, we will be happy to help you.
-
I'm developing an industrial machine vision application that uses two cameras LifeCam Studio in a configuration of stereo camera using OpenCV.
In order to perform a proper Stereo 3D calibration, I need to disable auto focus entirely. This is necessary because update dot is improtant part optical characteristics and that's exactly what the calibration procedure seeks to characterize. Cannot perform a good calibraton so change the optical characteristics of the camera.
This also applies to a 2D calibration only camera.
Is there an API released for manipulation of the camera? If this isn't the case, when it comes out?
Hi Sarah,.
Your Lifecam question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the various Windows 7 forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads
-
No zoom control with Lifecam Studio on Win7 64 bit
When using a lifecam studio on Win7 64-bit zoom / pan & tilt functions are disabled, but works ok on other systems 32-bit, not sure if it's a matter of 64-bit or another factor?
Hello
Glad to know that the problem has been resolved. If you have additional questions about Windows, please post your questions in this forum. -
Why Firefox brings up to Settings page in windows 10 at startup?
Use Firefox with Windows 10, why Firefox brings to the top of the settings page in Windows 10. She does whenever I start Firefox.
I solved the problem. On the settings page, I went to Default Apps, selected and then select Firefox Web browser.
Thank you all
Maybe you are looking for
-
Windows mail 0x800CCC78 error code
Just started not to be able to send e-mail, can receive very well. I get this message and the error code: The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go
-
How to convert a document that was sent to me in Adobe Reader PDF to a JPG file to save it in my Windows LIve photo gallery. I use Windows Vista. Thank you.
-
error message c:windows\sytem32\sshnas.dll
When windows starts, I get this error message. I have trouble downloading a new game. The e drive does not recognize the drive.
-
Hello!When I use Windows Media Player to burn a disc, I get a message saying... Windows was unable to format the drive. Help, please!Celeste
-
How do I share files via wifi router
I have a question on the homegroup networking mechanism. My and one of my friends computer works via a wifi router. His office and it is wired through a router. But I can't find my friends computer on the network. The homegroup networking was was wor