Check the sequence!

Similar Questions

• Check the sequence of events

  Hi all.
  
  I need to check the order of a series of events that represents the route of a product. If I receive or deliver the product may occur different events, the problem is that not all events are sequential.
  
  For example:
  
  I f I'm delivering a product, can occur one of the events
  
  1 - load
  2 - order for repair
  3. - output for repair
  4 - the order for rain
  5 - output for rain
  6 - delivery
  
  The events of the 2 and 3 are sequential as 4 and 5, but 2 is not always before 4. Another variant is that events 2 and 3 could happen but not the 4 and 5, and vice versa.
  
  To complete my task, I only have the following tables:
  
  -If a delivery or reception
  CATALOGUE _ROUTE)
  NUMBER OF ID_R
  TYPE VARCHAR2
  );
  
  -All events
  () CATALOG_EVENTS
  _F IDENTIFICATION NUMBER
  TYPE VARCHAR2
  );
  
  -Combination of events and itineraries
  () ROUTE_EVENTS
  NUMBER OF ID_RE
  _R IDENTIFICATION NUMBER
  NUMBER OF ID_E
  Priority NUMBER
  );
  
  The priority field is used only in some cases, such events 2 and 3 or 4 and 5.
  
  -Events
  Events)
  NUMBER OF ID_EV
  DATE EVENT_DATE)
  
  The goal is to ensure that all the events have been entered correctly

  Hello

  Welcome to the forum!

  Whenever you have a problem, please post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data. You don't have to display a large amount of data. In this case, looks like maybe six channels (some of which are valid, and some of whom illegal combinations of events) would be sufficient.

  This sounds like a job for analytical functions. LEAD and LAG are great to compare the values of consecutive lines of the the same set of data. Other analytical functions, such as the COUNTY, FIRST_VALUE and MIN, sometimes combined with a CASE expression, can find further values.
  Sorry, I don't understand your business rules, so I can't be more specific now. Maybe I could show you exactly if I had a concrete example, including CREATE TABLE and instructions INSERT for all relevant tables and the results desired from these data.

• Check the status of replication Dataguard of DB primary

  Hi all

  DBA has previously configured Data Guard physical Standby as.

  Now, we want to check the replication status of pending DB log files.

  However, we cannot connect remotely to Eve using pl/sql and etc., db DB being located on Mount (Physical Standby) mode.

  Someone has a script that can view the status of replication between sites.

  Script can be run only in the primary db

  With the help of script below we are not sure that newspapers applied pending:

  Select sequence #, first_time, applied to the order of v$ archived_log by sequence #.

  Please share this script if you have one!

  Thanks in advance!

  Kind regards

  Ravil

  There is a dest_id column in v$ archived_log, check the sequence # applied, archived status based on database dest_id primary.

  Select sequence #, archived, applied from v$ archived_log where DEST_ID = 2

• Checking the status of the main sequence in reminder PostUUT

  I'm checking the State of the main sequence in the PostUUT callback, running TS 2014 SP1.
  Say, the main sequence generates an error. PostUUT I check and get the following

  Parameters.Result.Status "error".
  Parameters.Result.Error.Code

  Parameters.Result.Error.Msg

  Parameters.Result.Error.Occurred False

  Parameters.Result.Error.Occurred should not be set to True? If this isn't the case, please explain why.

  Thank you.

  In the process model of the step that calls the MainSequence reminder is set to ignore errors.  It is for the rest of your group of main step can run.  That is why we only sets result false but retains all the error information.

  If it were me, I would trigger on the State channel.

  Hope this helps,

• Image sequence Ethernet to check the value 0 x 00000000

  I see intermittently frames ARP (requests and responses) equipped with a FCS set to all zeros.

  On one VLAN, ~ 300 000 ARP frames in an ~ hour, including 1100 ~ contained an FCS all zeros.  Occasional inspection suggests that only Windows VMs produce these odd ARPs.

  I have seen this all first capturing using Wireshark loaded on a virtual Windows machine.  However, the trace that I reference here was taken using a Fluke Optiview XG (one of its Ports 'network', i.e. material custom able capture rate).

  Seems to me that any frame with a FCS of all zeros will be abandoned by receiving guests ("bad FCS").

  We are short of vSphere 4.0.0 build 385281

  Here is a screenshot of such a framework.

  

  For a trace, see https://Vishnu.FHCRC.org/bad-FCS/

  I'm trying to understand how to capture images (not only ARPs) containing a FCS set to 0x0000, to see how widespread is this issue.

  Looking for the communities 'Frame Check Sequence' site, I didn't know all the signs that correspond to this

  Suggestions for other search strings?  Someone at - he seen already?

  -sk

  Stuart Kendrick

  FHCRC

  I don't think this is really a FCS of 0, but instead Wireshark bed trailer all 0 of the framework of the FSC.  The first thing to check is if the capture actually includes the FCS. According to the http://www.wireshark.org/faq.html#q7.10 most of the BONES are not. support capturing the FCS.

  The second thing is to take a look at your preferences of Wireshark. In the menu, select Edit-> preferences, expand the Protocols section, scroll down to Ethernet and check the setting of the packets is suppose to have FCS. If this box is checked, Wireshark will do exactly as it says for example, assumes that the package has a FCS and will give you the FCS incorrect error message you see.

  Concerning

• best way to check the info that is in a different sequence? Recognize the ABC, ABC, correct ACBas

  I'll probably have my push of information in a table. but I don't want to check every sequence one by one, because it will take a long process. is there a better way to solve this problem? Thank you

  We know do not what you will be pushed into a table, but you can use the table or class String indexOf() method to check if they contain certain characters/elements.

  If (String("ABC"). IndexOf("C") >-1) / / C is in the string

  If (String("ABC"). IndexOf("A") >-1) / / A is in the string

  If (String("ABC"). IndexOf("B") >-1) / / B is in the string

  Only then, you can create a loop that passes through your other channel (ACR) and test each character by using a single line of the code above with the argument being a variable indexOf

  Another option would be to sort the two games that you want to compare in the tables and then see if they are equal to one.

• How to implement the sequence controls in the UI custom LabVIEW

  Hello

  I would like to use LabVIEW to run the TestStand sequence and display running windows in the user interface. (something llike the picture as an attachment)

  I followed the method of my groin: connected sequence controls in the handler of TestStand UI performance as objects display.

  Then use the registry event callback to build a VI reminder.

  VI recall is checking the RunState of the Manager of the execution is stopped and assigning the execution to this execution handler.

  However, it works, but really confuses me, needless to say to you all.

  Could someone give me any suggestions how to display running windows in the UI LabVIEW? I'll appreciate your help.

  It's too complicated to answer your question in simple words.

  Please examine carefully the following links. It comes with some basic concepts and tutorials on the TestStand UI use in LabVIEW.

  http://www.NI.com/white-paper/7560/en/

  http://www.NI.com/white-paper/14376/en/

• Creation of settings of variables / a module of code that persist when the sequence is complete

  I create parameters/variables programmatically in a module of code (c#) by passing the object to people of the country and calls the "NewSubProperty".

  I also tried SetValNumber with PropOption_InsertIfMissing.

  But it seems that they are only created in this instance of the sequence, because they left when the sequence is over. I really wanted to persist.

  I wanted to avoid creating the globals station dynamically like that, but maybe that's all I can do to make them last.

  Any ideas would be appreciated gratefully.

  Thank you

  Ronnie

  Hello

  Check out the links on this answer

  http://forums.NI.com/NI/board/message?board.ID=330&message.ID=11226&query.ID=267719#M11226

  It may be useful

  Concerning

  Ray Farmer

• Collect the serial number of UUT, further in the sequence, then move the dialogue at first USE

  Hi all

  What is the best way to collect the serialnumber USE later in the test sequence (our USE the stored serialnumber, and we want to gather through a DLL call later in the sequence) and pass the input serialnumber dialogue USE?

  Database and report should be in agreement with the serial number that is read from the device from the sequence.

  Looking forward to your advice!

  Kind regards

  David

  Why don't you just replace the PreUUT callback and put your own dialogue in there?  Why the serial number collection should happen later? If it's a matter of having to WEAR it then, you can substitute the reminder of the installation process and enable the object to measure.  Or could even put on in the reminders of the PreUUT or PreUUT loop.

  What people do is override the recall of PreUUT and to put their own VI/DLL calls generally are make barcode scanner or other entry of serial numbers.

  You need to be aware of the indicator to continue.  That's what interrupts execution.

  More information on recalls: http://zone.ni.com/devzone/cda/tut/p/id/6605

  Using the model of process correctly: http://zone.ni.com/devzone/cda/tut/p/id/7958 special attention to the part pertaining to the reminders.

  Another with a section of reminders: http://zone.ni.com/devzone/cda/tut/p/id/2694

  Check out my first post here: http://ni.lithium.com/t5/NI-TestStand/Intercept-the-PreUUT-callback/td-p/998605

  Hope this helps,

• How to control the sequence of scanning channels in DAQmx

  I have an application written for the traditional DAQ C API that I need to convert to use DAQmx drivers. The application uses the SCAN_Setup function to create a canal complex analysis sequence of taste effectively at different rates on each channel and to vary the rate on one of these channels. The following example shows the sequence of sweeping strings passed as an argument to the call of SCAN_Setup chanVector:

  0 0 0 0 0 0 0 0 0 0 0 1 0 2 0 3 0 1 0 2 0 3 0 1 0 2 0 3

  The sequence of I is synchronized with a waveform of the AO and is designed to measure response on AI0 from an external system to this waveform while taking other measures from other sensors at the same time: AI1, 2 and 3. This sequence provides a higher AI0 at the beginning of the wave sample rate.

  How can I do this using DAQmx?

  I tried to use a loop to make several calls to the DAQmxCreateAIVoltageChan function, one for each sample in the vector of channel, but the result does not seem to read the right channels in the correct order.

  Is there a problem with the addition of several times the same physical channel in the same task?

  Thanks for your help.

  Hi TradLuddite,

  Material of the series E have a specification 'size of the memory configuration' of '512 words', which means that they can sweep up to 512 unique physical channels. I would wait until a depth of 1000 causes the DAQmxStartTask() return an error. However, it may be possible to exceed this limit, if the scanlist consists only of the groups of the same size of the identical physical channels (where the entry terminal configuration limits are the same within each group), because the material is supported by a very simple form of compression scanlist. Material of the series M have a specification corresponding loads "scan memory list" 'entries of 4095', to a depth of 1000 would not be in this limitation on the M series.

  Definition of the data property of transfer mechanism is probably not necessary. DAQmx chooses a default value for this property, depending on the type of device and the type of calendar sample property. The use of DAQmxCfgSampClkTiming() to set the calendar type of sample to "Sample clock" will result in a mechanism for transfer of data by default "DMA", "USB in bulk" or "Pauses" depending on the type of bus (PCI/PXI, USB and PC Card, respectively). Not configuration synchronization (or by calling DAQmxSetSampTimingType (taskHandle, DAQmx_Val_OnDemand)) will result in a mechanism for transfer of data by default "set of I/o.

  What DAQmxRead() function are you? You specify DAQmx_Val_GroupByChannel or DAQmx_Val_GroupByScanNumber for the fillMode parameter? Have you checked the value returned in * sampsPerChanRead?

  Only repeated channels return incorrect data? It works when you repeat all the channels? Otherwise, maybe the terminalConfig parameter does not correspond to how signals are wired, you have ghosting, or there is a problem with the wiring for signals. It still works in NOR-traditional DAQ?

  Brad

• scope of traceroute to check the bulk port

  Hello

  Our client says somewhere in the internet clould of our network's color port. Most of the time, if the client's complaint, I will use the technique of telnet that indicates that the firewall does not block:

  Telnet www.webserver.com 80/source-interface fa0/0

  However, northeast of my client showed that output of its router:

  router #trace

  Protocol [ip]:

  Target IP address: 192.168.100.1

  Source address:

  Digital display [n]:

  Timeout in seconds [3]:

  Probe County [3]:

  Minimum time to live [1]:

  Maximum time to live [30]:

  Port number [33434]: 137

  In bulk, Strict, Record, Timestamp, Verbose [no]:

  Type to abort escape sequence.

  The route to 192.168.100.1

  1 202.183.1.161! A * ! A

  What makes me confuse is the default port number 33434 but it changed to 137. Does it mean it will check the particular port along the jump?

  Any documentation to understand the output this above?

  Thank you.

  Maher

  Here is a link that will help you...

  http://www.Cisco.com/univercd/CC/TD/doc/product/software/ios123/123tcr/123tfr/cfrgt_12.htm#wp1058298

  When you use with Telnet port numbers, the port is a TCP port.

  When you use numbers to port with Traceroute, the port is a UDP port.

  And yes the! A way that blocks an access list.

  Hope this helps,

  ~ ron

• BlackBerry smartphones I bought the ECG app earlier today and checked the p...

  I bought the ECG app earlier today and checked the payment via paypal. The order number is XXXXXXXXXXXXX. The app is not then download. Is this normal? It was the first time I have baught something and don't know if it is wrong or not?

  (deleted order No.)

  Hi again,

  Maybe... but lets try other things first... Try these things...

  In some cases, it was discovered that updates/install (from got AppWorld apps) require additional steps in order to install the update. If the update will not install, please try this:

  1. Homescreen > Options > Advanced Options > Applications > highlight the app > BBKey > delete
  2. AppWorld > MyWorld > Login > highlight the app (if she shows at all, in any State) > BBKey > delete
  3. Use your PC (via the mass storage Mode) or your BB (via Media > BBKey > Explore) and find all references (folders, files) to the app delete everything you find. Search the memory of your device and your press card as well.
  4. Use this link to user guide AppWorld for re - install the app - then predict a new activation/registration key
  • http://NA.BlackBerry.com/eng/deliverables/7268/re-install_an_item_on_a_different_device_643962_11.js...

  Also, please try a hard reset: turn on, remove the back cover and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  In addition, you can try this sequence:

  (1) AppWorld remove your BB (Homescreen > Options > Advanced Options > Applications)-if she prays that you restart the BB to do.

  (2) a Batt Pull restart as described above.

  (3) get a new link and install a new copy of AppWorld

  • http://NA.BlackBerry.com/eng/services/appworld/download.jsp#tab_tab_download
  • Yet once, if he asks to restart, do.

  (4) restart another Batt-sweater

  (5) see if it works now.

  One of these will get I hope it will.

  See you soon!

• How to change the sequence vendor_id and vendor_site_id in R12?

  Hello

  I want to increase the internal vendor_id sequence and vendor_site_id of AP_SUPPLIERS and AP_SUPPLIER_SITES_ALL table.

  Is there a sequence that I can change so after I created or suppliers of the interface, the vendor_id will start on a specific number.

  Thank you.

  You can check in the all_sequences table.

  I think that the corresponding sequences are

  PO_VENDORS_S

  PO_VENDOR_SITES_S

  You will have to perhaps double control by creating a new provider and check the value of the sequence.

  It will be useful.

  See you soon

  AJ

• Films taking on average 11 times the length of the sequence export.

  I had to apologize to my teachers at the school of film about the fact that she was taking my 20 minute film: with "Lumetri color" on the clips and 2 "unsharp mask", as well as normal audio and music - and it took you 3 hours (seriously) only to return, and another 5 hours now just to export - using 'Use previews' and with the two boxes 'Maximum to make quality' uncontrolled export. It's an hour 10 process on a film of 20 minutes to export.

  10 hours of export process on a 20 minute film.

  It seems I'm not the only one and please please please make me stop is pressed by my teachers to use a magnetic calendar of FCP x Screw - BUT THIS isn't RIGHT.

  A customer of Adobe of pleading

  Unsharp mask will increase render time exponentially, unfortunately. Haven't tried Lumetri me am so not, of course, how the effects of exports, but have seen other complaints in this regard.

  In the future, I would recommend not made the timeline prior to export. Although there are a few situations where the first might be able to do a 'smart export' using the rendered preview files, generally went twice - once to preview and then format again in final destination format, adding a generation of compression. Certainly, the effects get made in the first pass, so the final export didn't need to do it again if you check 'Use previews', but again, not a fan of the use of permanent export previews. Better, making it all directly from the element source directly to the final format. Mac many users can be used for the CPF which pretty much required rendering previews, then did a quick converted at the end without reposting, but with the first, use the workflow in the face.

  As Bob mentioned Peru, having a dedicated hard drive VIDEO can help with flow. Using a single hard drive certainly plays a role in the speed of export. I noticed that there are only 50 GB free on this 500 GB drive. Once a car is past 70-80% of the performance full, can really make a splash. You are 90% full, so that is a factor in the slow export. You'll have enough room to complete the export? It would be another concern!

  You have Mercury GPU hardware acceleration enabled? Check under file > Project Settings > General and see what it says for converter.

  Max rendering quality is beneficial for the scale of production. If the size of the source image and destination is the same, do not use, can add a lot of rendering time.

  When you have the time, experiment you a bit. Put 1 minute of your layer source footage in the sequence, no effect and export to the format of choice. How long does it take? Now, add Lumetri and do it again to see how that could increase rendering time. Now add a mask blur and export of time will really go through the roof!

  Last tip, make sure form pre-defined sequence game footage - using the incorrect sequence adds more time conversion, such as frame rate conversion.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• After the passage of a different program and vice versa, Premiere Pro will play is no longer the sequence

  It took me a while to limit this problem. Quite randomly, my sequence would not apply.  I finally reduced to this.  I hope that the 28/01/16 update should fix, but it didn't.

  Summary:

  -commutation of Premiere Pro to a different program, while a sequence is stopped and then backward, tilt will cause Premiere Pro is no longer playing the sequence.  .

  Follow this exactly to reproduce the problem:

  (1) create a new file with a new sequence inside

  (2) create a minute long clip of anything (bars + tone, color matte, text, etc.) and drag it into the timeline

  3-hit game

  (4) setback (this is important!, see below)

  (5) to switch to another program, either via alt - tab or open another program so it gets the focus.

  6) move to Premiere Pro

  7-piece struck again, sequence no longer will play is not the expected behavior.  PP must be rebooted to solve the problem.

  If you do not hit 'stop' to step 4 and let the sequence to keep playing:

  -When you pass on Premiere Pro and then return, you can press the stop button.  When you click the button new play things will work as expected.

  My configuration: win 7 + Premiere Pro 2015.2 release, build 9.2.0 (41), i7 Proc/32 GB memory

  My solution (sad), it of that if I need to go to another program for a bit, make sure to hit 'play' in Premiere Pro before moving on to another program and let it in the background.  When I come back I can play and stop as usual.

  Hey thanks, that the explanation is logical. "Mallocing everything in desperation" will be my new go to words to describe my state of mind sometimes.

  Fixed it!, but it was something else. :

  I tried to uncheck "allow applications to take exclusive control it" box and rebooted, verified that the box was always checked... but the first has always had the same problem. The stop/play button icon changed as you noted, but the timeline not yet played.  This led me on a path of futzing with different combinations of audio material.

  Difficulty of summary:

  -First, change the 'default' output to some other active sound output (even if it is not physically used), then change it back.

  (1) in the first Audio hardware preferences, I changed "Default Output" for "Realtek Digital Output" (which is enabled in my sound control panel, but nothing is physically connected).

  (2) I went back to the first, and he could still play the timeline after alt-tabbing to other programs and return.  There was no audio since obviously I have nothing plugged on my outputs digital.

  (3) 'Exit by default' Changed in first preferences Audio equipment Audio back to "Speakers (Realtek High Definition)", tried the stuff of alt - tab again and as if by magic it worked like the good old days (early 2015).  Even still, it still works very well even though I have the checkboxe "exclusive control" ticked off now (parameters of sound from speakers in the Panel).

  Notes:

  -I don't know if step 2 is required.  Things are working fine for me and no matter what I change, I can't do things in the State 'broken '.

  -At some point, in the sound control panel, I changed one of the outputs digital to be default, but that doesn't seem to make a difference at first. Whether or not this has finally made a difference affecting the steps above, I don't know.

  BTW, audio installation is:

  Audio is Realtek High Definition Audio, version 21/08/2013 6.0.1.7023 (hardware Audio first output by default is "Speakers (Realtek High Definition Audio)"

  I have a 3 GB Evga 780 also graphics card, but no HDMI outputs are used/activated.