After the passage of a different program and vice versa, Premiere Pro will play is no longer the sequence
It took me a while to limit this problem. Quite randomly, my sequence would not apply. I finally reduced to this. I hope that the 28/01/16 update should fix, but it didn't.
Summary:
-commutation of Premiere Pro to a different program, while a sequence is stopped and then backward, tilt will cause Premiere Pro is no longer playing the sequence. .
Follow this exactly to reproduce the problem:
(1) create a new file with a new sequence inside
(2) create a minute long clip of anything (bars + tone, color matte, text, etc.) and drag it into the timeline
3-hit game
(4) setback (this is important!, see below)
(5) to switch to another program, either via alt - tab or open another program so it gets the focus.
6) move to Premiere Pro
7-piece struck again, sequence no longer will play is not the expected behavior. PP must be rebooted to solve the problem.
If you do not hit 'stop' to step 4 and let the sequence to keep playing:
-When you pass on Premiere Pro and then return, you can press the stop button. When you click the button new play things will work as expected.
My configuration: win 7 + Premiere Pro 2015.2 release, build 9.2.0 (41), i7 Proc/32 GB memory
My solution (sad), it of that if I need to go to another program for a bit, make sure to hit 'play' in Premiere Pro before moving on to another program and let it in the background. When I come back I can play and stop as usual.
Hey thanks, that the explanation is logical. "Mallocing everything in desperation" will be my new go to words to describe my state of mind sometimes.
Fixed it!, but it was something else. :
I tried to uncheck "allow applications to take exclusive control it" box and rebooted, verified that the box was always checked... but the first has always had the same problem. The stop/play button icon changed as you noted, but the timeline not yet played. This led me on a path of futzing with different combinations of audio material.
Difficulty of summary:
-First, change the 'default' output to some other active sound output (even if it is not physically used), then change it back.
(1) in the first Audio hardware preferences, I changed "Default Output" for "Realtek Digital Output" (which is enabled in my sound control panel, but nothing is physically connected).
(2) I went back to the first, and he could still play the timeline after alt-tabbing to other programs and return. There was no audio since obviously I have nothing plugged on my outputs digital.
(3) 'Exit by default' Changed in first preferences Audio equipment Audio back to "Speakers (Realtek High Definition)", tried the stuff of alt - tab again and as if by magic it worked like the good old days (early 2015). Even still, it still works very well even though I have the checkboxe "exclusive control" ticked off now (parameters of sound from speakers in the Panel).
Notes:
-I don't know if step 2 is required. Things are working fine for me and no matter what I change, I can't do things in the State 'broken '.
-At some point, in the sound control panel, I changed one of the outputs digital to be default, but that doesn't seem to make a difference at first. Whether or not this has finally made a difference affecting the steps above, I don't know.
BTW, audio installation is:
Audio is Realtek High Definition Audio, version 21/08/2013 6.0.1.7023 (hardware Audio first output by default is "Speakers (Realtek High Definition Audio)"
I have a 3 GB Evga 780 also graphics card, but no HDMI outputs are used/activated.
Tags: Premiere
Similar Questions
-
In order to improve my skills and ease with Premiere Pro, I bought Adobe Premiere Pro CC Classroom in a Book and began to follow the tutorial. I opened the first project for lesson 1, as instructed, but looks like that when he opened it imported two media accompanying the project of the lesson and media one of the practical projects that I've done before. Can someone tell me what I did wrong and why it has imported two sets of brackets instead of only in the media for the lesson. Media for two different projects are not storeed in the same place?
I found the problem. Sorry if I've lost any time. Please do not take into account. Thank you.
-
In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.
Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.
The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.
Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.
Any suggestions or workarounds will be appreciated.
Kind regards
Vijay
Hi all
Thanks for that bring to our attention. We will consider adding this feature in the future.
RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.
An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.
Hope this helps,
Anna
-
my keyboard gives sign 'inverted commas' for the 'at' key and vice versa. How can I fix it?
[Moved from comments]
Wednesday, November 7, 2012 16:07:16 + 0000, jimYK wrote:
my keyboard gives sign 'inverted commas' for the 'at' key and vice versa. How can I fix it?
Go to control panel | Regional and Language Options. Keyboards and
Translation? You put it in a language that does not correspond to the
physical keyboard.Ken Blake, Microsoft MVP
-
"Labtop keys two-way when want it @ key IAppuyez the" and vice versa
"When I want the @ key IAppuyez the" and vice versa
-
It takes up to 4 minutes for the player switch between library and Rip, and vice versa.
I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.
Hello Absno69,
Thank you for your message. You mentioned that there were no new software installed before that happens. Were there any hardware changes or updates? If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively. Click HERE for the system restore instructions.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
my windows photo gallery will play is no longer my videos (they have been there for 2 years and always worked before, now when I try to play them just the photo gallery)
Maybe some type of update caused a compatibility issue.
Doing a system restore to an hour before the beginning of the question could
be worth a try:Windows Vista - system restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questionsWith the help of the Windows Vista system restore
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/ -
I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems
Thank you
PeterHello
The easiest way is with a crossover cable - a special wire to connect the two systems.
You can get one at your local computer store - they are not expensive.Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
set up the network.====================================
Or you can set up a wired or wireless network.
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlAd-hoc networking
http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
Set up a computer-to-computer (ad hoc) network
http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspxHow to set up an Ad Hoc wireless network in Windows Vista
http://www.home-network-help.com/ad-hoc-wireless.htmlCreate an ad hoc WiFi network secure on Windows Vista
http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htmNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I have installed and updated from Premiere Pro, but I can't find it on your computer. The creative cloud that writes Premiere Pro was updated, but how to open it?
Hello
Premiere Pro is a 64-bit application and does not work on a 32 bit OS. Your operating system appears to be 32-bit. Please refer to this document for the minimum specifications: system requirements | Adobe Premiere Pro
Thank you
Regalo
-
Why install adobe muse in install me the desktop CC version MUSE and installed on my laptop as mu profit 2015 is not open my laptop sites created on the desktop and vice versa
You must use the same version of Muse on the two computers.
Don't forget that both computers running a 64-bit operating system to ensure you have the latest versions on both computers.
-
change the status of a NIC of UP and down and vice versa?
Hi, I just wanted to ask questions about how to change the status of a NETWORK adapter in ESX 3.5 of up toward the bottom using ESX commands (and vice-versa to walk down)
concerning
Jose
You can also add/remove a vmnic a vSwitch or portgroup, using the esxcfg-vswitch command.
esxcfg-vswitch - L vmnic0 vSwitch 0-> add vmnic0 to vSwitch0
esxcfg-vswitch - U vmnic0 vSwitch 0-> remove vSwitch0 vmnic0
-KjB
VMware vExpert
-
A Flash Player error keeps popping up because DEP maintains close program or vice versa.
A Flash Player error keeps popping up because DEP maintains close program or vice versa.
An error message several "Adobe Flash player 11.4 r402 has stopped working" , it is followed by
"Adobe Flash Player 11.4 r402 was closed.
To help protect your computer, Data Execution Prevention has closed Adobe Flash Player 11.4 r402. " in the taskbar.
I tried to disable DEP for Flash Player, but can't find the program on my computer to exonerate DEP.I am running Windows Vista Home Premium SP1 & 2 can you please someone help with this as the error message boxes are so many and if that attend its impossible to use my computer.
Thank you very much
Gary.OK, I think I found the problem, which seems to be with my browser is Mozilla Firefox. When I open a different browser (I tried Google Chrome), I have not had any problems with this DEP error and Flash behaved normally. I have not had time to try to uninstall and reinstall Firefox again but that's where the problem arises. Worst case, I'll change my browser, problem sorted!
-
New iMac / installed Premiere Pro / will not export media and accidents
I have a new end 2013 iMac 27 inches. Yesterday, I installed Premiere Pro. After completing my first project today, I tried to export media and PP said that a serious error has occurred and must stop. Adobe Media Encoder does not - too, it blocks. I uninstalled all creative Applications of cloud I downloaded yesterday, then restarted, and then used the Adobe Creative Cloud tool for Mac, rebooted, then re-installed Premiere Pro. The problem persists. Premiere Pro will not export my video and accidents with reviews of "serious error". Adobe Media Encoder still does not open and crashes every time. It's frustrating. I never had this problem on my MacBook Pro mid-2009. I even opened my MBP to export media from this updated release of Premiere Pro and it worked! So maybe that's the version of the SOUL, the more recent which is NOT installed on my MBP? Perhaps more current is unstable and crashes? I do not know. I would like to export my video and use these applications how they're supposed to run. I worked on this problem all day.
-
Is it possible for my tags in Windows to reflect also on Mac and vice versa?
Hello! I recently bought a MacBook and a new hard drive. I'm organizing my files on my Windows desktop. I already started to organize into folders, adding tags and authors and all that. But when I checked on my Mac, the metadeta was not there and vice versa. Please, I really need help. I search online and could not find a solution.
Maybe this will help > http://thefamilycurator.com/moving-photo-metadata-between-windows-and-mac/
-
A LabVIEW vi or llb developed on a Mac runs on windows and vice versa
Does a vi in LabVIEW/llb developed on Mac OS work on Windows and vice versa. ?
For the most part, Yes. If there is no specific code either Mac or Windows (such as the ActiveX calls), so the code will not work.
Maybe you are looking for
-
Faces random restart disaster photos
For nearly a decade, we have used our iPhoto as screen saver library on our iMac 2008 and identified thousands of faces among our 20 K photos. A month ago, we bought a replacement iMac and Apple just told me to throw all this time spent ID'ing faces
-
When I click on the internet Explorer is not responding
When iclick vid inter net explore is not responding. and iam trying to go to the address bar of mydocuments & type msn.com .but he showed a message, windows cannot find not (null) pls sure type address again what is the problem
-
Why can't I go wireless?
Why can't I go wireless? HP Pavilion series g, windows7 64 bit, gateway2wire 2701-HG-B router?
-
Impossible to get a disc of music copied to my computer
I put in my Player library Windows Media, the classic of swoon Collection disks. (Discs 1-9 [8]) For some reason, the computer won't accept disc 8 - despite different efforts. Anyone got any ideas how I might solve the problem? John. [Original title:
-
Sort by name results in wrong order
When sorting by name in windows Explorer, the files are not correctly sorted. To reproduce, create the following files, and then sort them by name. 1a.txt1B.txt11 txt12 txt2A.txt When the files are sorted by name, the file named "2a.txt" is placed b