Check the sequence of events

Similar Questions

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• Messenger: The application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. How to fix?

  My Messenger was working normally, then I shut down my computer at lunch. In return, I turned it the Messenger wasn't working and this appeared:

  "The application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details"

  Can someone help me to fix it? Thank you.

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• When I opened e-mails. doc or pdf, this message appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  Original title: side-by-side configuration is incorrect

  When I opened, try opening some emails. doc or pdf, this msg appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  I'm going to log events, but how to solve the problem by putting the RIGHT configuration to?

  Thanks in advance

  Hello

  1. when the question is is produced?

  2. you remember of any change to your computer before the problem?

  3. are you using a 32-bit operating system or a 64-bit?

  Please visit: What are the information in the event logs? (Event Viewer)

  In the meantime, follow these steps and check if they help.

  Step 1:

  I suggest you install the Visual C ++ 2005 Sp1 Runtime and check if the problem persists:

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en

  Step 2:

  If this does not resolve the issue, I would have you done SFC scan on your machine to check if the problem is related to missing or corrupted system files.
   
  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Update error. Failed to check the updates. Event ID 1001

  Update error. Failed to check the updates. I rebooted the PC and the Windows Update service (it is activated and automatic when you restart).  Is there an event ID 1001 in the event log that shows when I try to run WinUpdate.

  Can anyone help solve this?

  Thank you.

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

• Correct the sequence of events for the loading of XML

  I have a complex object in Actionscript that I managed test and loading on a local computer. However, when I publish on the web, different network conditions cause the application trying to access the properties of the complex object before the XML file that defines it is finished processing. So I get null reference errors.
  
  I'm trying to understand the correct event system to notify my application I want only to access the properties of my complex once the XML file has been finished read to and populated my complex object properties. Any suggestions on what to do?
  
  I really wish that these forums have a tag formatting code or something so it's horrible, but in general this is what I have:
  
  package {}
  
  import flash.events.Event;
  import flash.events.IEventDispatcher;
  import flash.net.URLLoader;
  import flash.net.URLRequest;
  
  public class {ComplexObject
  private var xmlDoc:XML;
  private var request: URLRequest;
  private var loader: URLLoader;
  
  private var property1:String;
  private var property2:Number;
  etc.
  Supposed getter and setter functions
  }
  public void loadData() {}
  This.Request = new URLRequest ("config.xml");
  This.loader = new URLLoader (this.request);
  this.loader.addEventListener (Event.COMPLETE, xmlLoaded);
  }
  private void xmlloaded(evt:Event) {}
  this.xmlDoc = XML (this.loader.data);
  fill the object with the elements read from XML file
  This.Property1 = xmlDoc.property1
  etc.
  }
  }
  
  I can import and instantiate an object of this class in the main MXML file and call the function loadData fine locally. When there are network issues involved (IE on the web) I want the XML processing to occur independently and complete before doing anything else. What is the correct order of events management? My question may be too complex, but any tips or pointers to resources would be appreciated.

  I see nothing obviously 'wrong' with what you do; the complete event should not be distributed until the data has been loaded. I don't see where you apply the actual load.

  However, I use this technique to load XML data. There are easier ways. I would like to use HTTPService with resultFormat = "e4x". The HTTPService result event will be triggered when completely loaded data. You can do either in MXML or ActionScript.

• Synchronization of AO and output counter, arming and triggering the sequence of events

  Hi all

  I'm trying to synchronize a counter (used as a digital pulse) and analogue of a custom waveform output read from the file on a USB-6211. The goal is to always have these running until I hit 'STOP' and to be able to change the position of the pulse relative to each other. I created a VI by combining and modifying the Cont.Gen.Wfm.Int - Clk.Non - Regen.VI and the Continous.VI Gen dig Pulse Train and I'm now able to produce the two signals to the desired frequency, but I can't seem to get the "Initial period" to work correctly. The values that I come home do not seem to match what is happening LeRiz, and the spacing seems to vary from run to run (within each series is constant). In a previous post, Alfred has suggested:

  "Trigger counter outputs out of the trigger to start AO and adjusting the setting 'Initial period' should give you what you are looking for."  Don't forget to start the tasks of meter in the software before the tasks of the AO (if they are armed and ready to go before the start AO is sent). »

  (link here)

  I tried to use the controls and the propertynodes (perhaps incorrectly), but it doesn't seem to make a difference.

  I think what happens is that my arms and firing sequence is not done correctly. I read on as much information as I could about the outbreak and armament, but I don't know that I understand correctly. Most of the examples I found using an external trigger or perform analog input tasks finished. Does anyone have a suggestion on how to start my two tasks in the proper order? Is something else is wrong here?

  Thank you

  Gabe

  P.S. I have attached the VI and a sample waveform read.

  Hi Gabe,

  This is a cleaned of the VI version that should work (you need not adjust the initial deadline on the right fly?).  Instead of reading a file, I made just a simple square wave of 50% to be used for the test.

  Best regards

• Check the sequence!

  Hi every1,
  Any1 can help me find the missing between 1 and 100 numbers
  for example
  I have published codes between 1 and 100 and deleted the following codes 15,40,55,60 then if I want ot find codes missing between 1 and 100, how do I do this
  
  concerning
  Mr. Carl A.

  Hello

  Whenever you have a question, it helps if you post the version of Oracle (for example, 11.1.0 or same 11.1.0.6.0) that you use.

  The Rob works in Oracle 10 and more.

  In Oracle 9, you can use "CONNECT BY LEVEL <= x"="" to="" generate="" a=""> table counter of the integers from 1 to x, but only in a subquery.»
  I don't have Oracle 9 to test right now, but it should work:

  SELECT  id
  FROM     (
       SELECT        LEVEL     AS id
       FROM           dual
       CONNECT BY    LEVEL     <= 100
       )
  MINUS
  SELECT     code
  FROM     ac;
  

  Alternatively, on any version of Oracle, you can SELECT ROWNUM a fairly large table or a view.
  For example:

  SELECT     ROWNUM     AS id
  FROM     all_objects
  WHERE     ROWNUM     <= 100
  MINUS
  SELECT     code
  FROM     ac;
  

  Object usually has thousands of lines. If you need more, cross join object to himself.
  It's slower that "CONNECT BY LEVEL<=>

• Check the status of replication Dataguard of DB primary

  Hi all

  DBA has previously configured Data Guard physical Standby as.

  Now, we want to check the replication status of pending DB log files.

  However, we cannot connect remotely to Eve using pl/sql and etc., db DB being located on Mount (Physical Standby) mode.

  Someone has a script that can view the status of replication between sites.

  Script can be run only in the primary db

  With the help of script below we are not sure that newspapers applied pending:

  Select sequence #, first_time, applied to the order of v$ archived_log by sequence #.

  Please share this script if you have one!

  Thanks in advance!

  Kind regards

  Ravil

  There is a dest_id column in v$ archived_log, check the sequence # applied, archived status based on database dest_id primary.

  Select sequence #, archived, applied from v$ archived_log where DEST_ID = 2

• sequence of events

  does anyone know of doco that points to the sequence of events that occur during execution of the workflow.

  It seems that there is a cache object that gets authorised according to the newspapers etc.

  so from what I can see

  workflow is running,

  Clears the cache

  workflow token resets the attributes

  workflow starts

  action begins

  revalued attributes blah blah

  I guess this is documented somewhere, but I've not found in my travels.

  I had a copy of log4jviewer, but unfortunately I lost it during the change of my laptop. I will try to see if I can get it from my colleagues.

  Christophe.

• What is the sequence when a PDF file is generated?

  I would like to know the sequence of events when a PDF file is generated from InDesign CS4 using the Adobe PDF 7.0 printer. PostScript is involved somehow before the PDF is generated and I would like to have a better understanding of what is happening.

  Acrobat Help says:

  In an application such as Adobe InDesign, use the command print with the Adobe PDF printer to convert your file in Adobe PDF format. Your source document is converted to PostScript and sent directly to Distiller for conversion to PDF, without manually starting Distiller. Preferably current Distiller and Adobe PDF settings are used to convert the file.

  It is the a delicate, at least for me, because the explanation is confusing. My problem is the following: under InDesign > file > print > printer I have a PDF Adobe 7.0 (as well as my regular printers), and I don't know who 'Adobe PDF settings' are currently designated.

  QUESTION 1

  The expression of aid:

  Preferably current Distiller and Adobe PDF settings are used to convert the file

  is that the fact of Distiller > Preferences, and Distiller > settings Adobe PDF (the main window to distill)?

  QUESTION 2

  When I select the Adobe PDF 7.0 printer and press print, InDesign creates Postscript itself, or he asks using Acrobat or Distiller?

  QUESTION 3

  At some point before I get the PDF, a Postscript file will be launched, and it's "fairly directly to Distiller for conversion to PDF. At this stage, the Postscript file only is all the options that I asked in the print of InDesign dialog box (exit, Advanced Graphics, transparency and so on)? Or has there been some back-and-forth discussions between the Distiller (and its parameters) and InDesign (and its print settings) to solve all the conflicts?

  In short, is it correct to say that InDesign creates Postscript by itself (subject to its print settings), and then distilling takes Postscript from InDesign and converts it to PDF format (subject to its own parameters).

  Are you talking about export or print to PDF?

  Exported PDF files is not converted to postscript at all. It is exported

  directly to PDF using the libraries PDF internal.

  When you print to PDF, InDesign creates a postscript file, as it would

  What impression on any standard printer and Distiller converts that to

  PDF. Distiller simply acts as a virtual printer.

  The postscript created by InDesign file contains all the options work

  selected in InDesign - as would any postscript file everything

  printer.

  In summary, Yes.

  But you really should be export directly from InDesign and avoid

  the PostScript scene altogether...

  Substances

• Checking the status of the main sequence in reminder PostUUT

  I'm checking the State of the main sequence in the PostUUT callback, running TS 2014 SP1.
  Say, the main sequence generates an error. PostUUT I check and get the following

  Parameters.Result.Status "error".
  Parameters.Result.Error.Code

  Parameters.Result.Error.Msg

  Parameters.Result.Error.Occurred False

  Parameters.Result.Error.Occurred should not be set to True? If this isn't the case, please explain why.

  Thank you.

  In the process model of the step that calls the MainSequence reminder is set to ignore errors.  It is for the rest of your group of main step can run.  That is why we only sets result false but retains all the error information.

  If it were me, I would trigger on the State channel.

  Hope this helps,

• My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security.

  My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security. I ran Netstat-no, but data flashed on the screen, but I can't freeze it at the screen to display the data. What keys down to hold the data on the screen to display it.
  Thank you, OTTO

  original title: interruption tcp/ip connect limits

  Hello

  Try the steps below and check if the problem persists.

  Step 1:

  Run the fix provided in the link below to reset TCP/IP and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Note:

  Step above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Step 2:

  You can check the link provided below for more information on the use of Net command in Windows XP stat.

  Netstat

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/netstat.mspx?mfr=true

• If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Type these commands in the start menu, run a dialog box:
  Here's how:
  a. Click Start.
  b. in the run box, type the following commands one by one and press to enter.

  regsvr32 dfrgsnap.dll
  regsvr32 dfrgui.dll
  
  Method 2.
  I. to resolve this problem, follow these steps:
  a. Click Start, run, type % Windir%\Inf, and then click OK.
  b. right-click the dfrg.inf file and then click on install.
  OR
  II. Alternatively, you can reinstall Disk Defragmenter using the following command:
  a. Click Start, run and type that the following command and press ENTER.
  Rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.inf

  I hope this helps.

• Error message: problem loading parameters and check the event log or ask the administrator

  My wallpaper, the desktop icons and most of my documents are gone.

  I have Vista Home Premium and a couple of days and I connected my desktop background was changed. Several desktop icons are missing, and a message came up saying there was a problem loading my settings and check the event log, or ask the administrator (me) for more details. All my "Favorites" were missing in the sidebar and my documents and recorded images folders are empty. Microsoft customer service tells me there is an error in my code for the identification of product (from the Windows Activation in systems and Maintenance) so I can't help out.

  Any thoughts? Thank you!

  Hello, G25

  It is likely that your user profile is damaged. I would advise to create a new user account and test if you get any errors. If everything works as expected under the new user account, you can start to recover your account profile by following the steps on the following link: difficulty of a user profile is corrupted

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.