check the time of change of password

Similar Questions

• Checking the time of calibration

  I have a requirement to perform a daily calibration of an instrument on a daily basis.  Time of calibration should be configurable by the user.  So what I've done is created a menu item which allows the driver to control the time of the user.  In addition, I have a file where I store the last time of the calibration.  So, in my routine, I perform the calibration if it has been more than a day since the last calibration or current time is greater than the daily duration of calibration set.   For this last condition, there is always a possibility that calibration could get done before the interval of 24 runs IE: initially, the daily calibration lasted from 21:00 and then the operator decided to change it to 08:00 the next morning, so calibration running after 11 hours.

  However, if I implemented the OR condition as follows:

  Currently > calibration set time.  Current time is older than the last time of calibration 1 day, I meet the problem that calibration will be executed every time the current time > calibration set time, while I do want the calibration to run once if the time has changed.  I am faced with the logic of how to apply it.  I'm looking for experts or the forum for helping me overcome the intellectual obstacle right now.

  You can store in the file next time 'expected Calibration.  This would be fixed everytime user updates the test station.  This could also be set whenever a calibration is performed (when the calibration is done, set it to 24 hours from now, or the next time expected calibration).  You would only need to check if the current time is greater than the expected calibration time.

• remove the time limit of expiration password for users to ocs

  Hello
  
  I want to know how to remove the time limit of expiration password for users to ocs (GR 11, 2)? In our system, all user accounts are expired is in 1 week. I have to remove expdate. (the profile has been modified)
  
  THX

  SQL > select * from dba_profiles where RESOURCE_NAME AS "PASSWORD_LIFE_TIME;

  PROFILE RESOURCE_NAME RESOURCE LIMIT
  ------------------------------------------------------------------------------------------
  PASSWORD_LIFE_TIME 180 DEFAULT PASSWORD

  MONITORING_PROFILE PASSWORD_LIFE_TIME DEFAULT PASSWORD

  SQL > ALTER THE DEFAULT LIMIT PASSWORD_LIFE_TIME PROFILE UNLIMITED;

  Modified profile.

  SQL > select * from dba_profiles where RESOURCE_NAME AS "PASSWORD_LIFE_TIME;

  PROFILE RESOURCE_NAME RESOURCE LIMIT
  -------------------------------------------------------------------------------------------
  PASSWORD_LIFE_TIME UNLIMITED PASSWORD

  MONITORING_PROFILE PASSWORD_LIFE_TIME PASSWORD

  To change the password of a user:

  change the username identified by new_password;

  Published by: hitgon on April 30, 2012 19:33

• Using AS2 to get the time and change according to result

  I need to make any changes to a flash projector which was built recently that changes of what is played according to the time of day. It is used to announce the breakfast or lunch/dinner for a restaurant. Previously we had put in place so that the time change happened at 5 in the morning and 10 o'clock in the morning. The code is below. The restaurant wants to change the time switch to be now at the half. I know how to extract the hours and minutes to do.

  This is the code that I've been using

  var currentHours:Date = new Date();
  var currentMin:Date = new Date();
  
  
  timeInHours = currentHours.getHours ();
  timeInMin = currentMin.getMinutes ();
  
  
  var today: Date = new Date();
  shownow = now.setMilliseconds;
  
  
  
  
  If (timeInHours > 4 & & timeInHours < 11) {}
  breakfast_mc._visible = true;
  breakfast_mc.play ();
  dinner_mc._visible = false;
  dinner_mc.stop() ;
  / / trace (timeInHours);
  } else {}
  breakfast_mc._visible = false;
  breakfast_mc.stop ();
  dinner_mc._visible = true;
  dinner_mc.play() ;
  / / trace (timeInHours);
  }
  trace (timeInHours);
  trace (timeInMin);
  Stop();
  Clips of film of breakfast and dinner have this code in them, as well as at the end of each cycle, it checks the time and switches.
  I found this code on Flash Kit, and wanted to try to change it, my hope, was so that he could generate a delay of 24 hours 1604 or 1029 I could then do a comparison <>/ with, but this function adds the numbers then 16:15 = 31 and 12:19 = 31 also. Does anyone have any suggestions on how I can do this
  ? I need time to change at 05:00 and 10:30.  There is a possibility that they will want to extend out to include the day of the week as well. Now I just need the fractional hours for works well.
  function checkTime()

  {

  dat var = new Date() ;

  var h = dat.getHours (); / / 24-hour format is already...

  mn var = dat.getMinutes ();

  / turn to the last limit of 15 minutes /

  //mn = Math.floor (minutes/15) * 15;

  
  

  / / OPTIONAL - add zeros to the hour and minute

  if (hr < 10)

  hr = "0" + hr;

  if (mn < 10)

  mn = "0" + mn; / / remove these last 4 lines if the zeros not significant not due not
  
  
  retour hr + mn ;
  }
  
  
  usage example:
  time = checkTime();
  trace (time);
  Any suggestions are welcome. Thanks in advance!

  If you want to do something when the user time is between 05:00 and 10:30, use:

  var d: Date = new Date();

  If ((d.getHours () > = 5 & d.getHours ()))<10) ||(d.gethours()=""><>

  No matter what

  }

• Why my ipod touch 5 turn on she used that happened last night I went on netflix for like 20 minutes then I closed it and then I'm gone on it again 5 minutes later, he worked later I hung on it and then I just wanted to check the time and it dint work

  I went to netflix for like 20 minutes, and then I closed and then I'm gone on it again 5 minutes later, he worked later I hung up it and then I just wanted to check the time and it dint work I can't see the screen I have tried pressing the home button and the stopcock one its does not work how to fix it

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• whenever I turn on my computer the time & date changed

  Every time I turn on my computer the hour and the date has changed. It started a few months ago and I have tried everything I can think. How can I stop this problem!

  There is a battery on the motherboard.  It is called / known as the "cmos battery".

  Like all batteries, when it becomes weak then he cannot supply.   In this case, a low cmos battery / exhausted will not keep time.  Even when the computer is disconnected from the wall socket, the battery is designed to provide power and maintain the internal clock of the computers.

  The cmos battery is like a watch battery and can be purchased where they sell watches.

  Check the internet for instructions on changing the cmos battery.   With regard to the size / model battery, you can find it listed in your computer manual, online manual for your computer or battery iteself.

• The main Kerberos change SSO password

  I need to change the password for the account of the Kerberos Principal Active Directory for OBIEE 11 g/WLS 3.6.  I have configured the SSO using the Oracle white paper and it works fine. Is there a change in the way that the password for the main partner? Or the keytab file must be recreated?

  OBIEE 11 g 11.1.1.6

  Windows 2008 R2 SP1

  Hello

  I think that, if you must change the password security principal, you must create a new keytab file. because the krb5login would consider time keytab and the name of the main account.

  You can change the password, create a new keytab, configure the connection file with the new name of the tab... Please try to use the klist k * *.keytab to check if you are able to get the username even after changing the password. I think that this error. create a new keytab file would be the right option

  Thank you

• I messed with the cmd, it changed my password without telling me, and I can not go on my PC. What can I do?

  Then, I planted the cmd with the new password as stuff > net user admin * and admin new_password, although whenever I tried something it says access denied, so I thought that nothing about it. Now, I try to reconnect and my password has been changed, I have tried everything to get back, so many different passwords, but nothing works. This is the only account on the PC, so I can't access anything whatsoever. I don't have a recovery disk or something like that so please don't recommend something like that for me. Is the only thing that I can do, full-on reset my PC? If so, how can I do, although any other type of assistance which means I wouldn't hard reset my computer would be greatly appreciated...

  Thanks for reading and any help provided in advance.

  Hey, thanks for the reply, but I am a noob at this and I have to ask. How do I set the BIOS so that it uses the DVD drive as primary boot device and I don't have a CD to repair windows 7, I don't think that my computer came with one!

  A Windows repair CD is absolutely essential if you decide to do maintenance on your own PC. It takes only three minutes to burn a via the control panel / backup and restore. You have these options:
  • Burn it on another computer.
  • Borrow one from a friend.
  • Purchase one here: http://systemdiscs.com/

  By selecting the CD drive as primary boot device is specific to each constructor. You often do by pressing F12. Consult the web page of the manufacturer or ask at your local PC store if you can't get out by yourself.

• 5.2 ACS does not check the Active directory changes

  Hi all

  I work with ACS 5.2 and using Radius Authentication client vpn.

  The authentication method used is Active Directory in a Windows environment with multiple domains in the same forest.

  My problem occurs when I change from one group to the other user in Active Directory. After that, I get the following message appears when try to connect:

  15039 selected authorization profile is DenyAccess

  The message is as correspond to the default policy.

  Another user in the same ad group works very well.

  All domains in the forest have a relationship of trust between them.

  I use universal groups to include all domain users belongs to this forest.

  Can someone help me?

  Concerning

  What is your rule of authentication corresponding against a single ad group?

  You can check which groups were extracted for the user, as follows:

  -goto "monitoring and troubleshooting.

  -Select authentication - RADIUS - today

  -Find the input that do not match and click on the Details icon

  -Expand the section "Details of authentication". Look under "Other attributes" groups comes from AD to be enrolled in the user

• Remove the error and check the time cartridge after replacing my black cartridge in my HP 7200 printer.

  After replacing my black cartridge in my HP 7200 printer, it says remove and check right cartridge. It also says this if I put the old cartridge in. Worked well before ink has low cartridge-more

  Cartridge OT:Ink

  Hi Jim,.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Error message: remove and check ink cartridges
  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00054462&LC=en&product=391151

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Is there a way to check the time since the last charge on the original Surface Pro?

  I am trying to understand what kind of battery life, I get on my Pro Surface. I would like to know how long it is sustainable, given that the last full fresh as well as what is using power. If you have an Android phone, if you look at the information about the battery, it is a little info that I'm looking. If the window does not that natively, can anyone recommend a good app? Thank you for your help.

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Your Surface uses an internal lithium-ion battery designed to go wherever you go. The duration of your battery lasts varies according to the kind of things you do with your Surface.

  Please refer to the article for more information:

  Surface RT and 2 surface of the battery and the power

  You can also check: power plans: frequently asked questions

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Just upgraded my iOS 9.3.1 ipad2 and my cell phone has been disabled. ATT has checked the settings and changed the SIM cards. This can be corrected?

  Just updated to iOS 9.3.1 on my ipad2. My cell phone has been disabled. This can be corrected?

  I have the same problem

• check the time line of root of a clip

  Hello

  Ive been looking around for an hour or two and not can't find something of this aid.

  IM using cs4 and actionscript 2.

  in my 2nd scene, I have a clip with a roll over button inside, I how can need this button to control the root timeline and navigate the site, I do this? This is what ive got and doesn't work-

  on (release) {}
  _root.gotoAndPlay ("main movie", 2);
  }

  Thanks for any help.

  Try to use only a label for the frame name, no number of scene or frame... Navigation for designs based on stage can be problematic.  It will save you a few questions if you design with the help of a scene.

• How to check the time remaining on the process to gather stats.

  I see how much time it will take to collect statistics.
  
  Thank you
  
  Published by: vhiware on February 12, 2010 16:03

  query V$ SESSION_LONGOPS

• The system time has changed after the restart of Bootcamp

  Hello

  After a restart of the boot camp partition Windows 10. I have the wrong time, in fact its always an hour later that it is.

  Although in the Control Panel, I checked the "time of to of Appleserver" it does not update the time of its actual value. Parenthesis in Win 10 (BootCamp) time is correct, then the difference that happens just restart in Mac OS.

  System:

  MacBook Pro early 2011

  OS X El Capitan 10.11.3

  Bootcamp

  Win 10 latest version with all updates/Updates aviable

  What could be the problem?

  Thanks for your help!

  Set the time zone correctly on OSX and Windows.