Checking the time of calibration

Similar Questions

• Why my ipod touch 5 turn on she used that happened last night I went on netflix for like 20 minutes then I closed it and then I'm gone on it again 5 minutes later, he worked later I hung on it and then I just wanted to check the time and it dint work

  I went to netflix for like 20 minutes, and then I closed and then I'm gone on it again 5 minutes later, he worked later I hung up it and then I just wanted to check the time and it dint work I can't see the screen I have tried pressing the home button and the stopcock one its does not work how to fix it

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• check the time of change of password

  Hello
  a strange request came, a request came to find the time when the user has changed the password
  I am confused
  
  all the answers

  Check PTIME in user$. If you use a password management strategy, you can also check user_history$.

• Remove the error and check the time cartridge after replacing my black cartridge in my HP 7200 printer.

  After replacing my black cartridge in my HP 7200 printer, it says remove and check right cartridge. It also says this if I put the old cartridge in. Worked well before ink has low cartridge-more

  Cartridge OT:Ink

  Hi Jim,.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Error message: remove and check ink cartridges
  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00054462&LC=en&product=391151

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Is there a way to check the time since the last charge on the original Surface Pro?

  I am trying to understand what kind of battery life, I get on my Pro Surface. I would like to know how long it is sustainable, given that the last full fresh as well as what is using power. If you have an Android phone, if you look at the information about the battery, it is a little info that I'm looking. If the window does not that natively, can anyone recommend a good app? Thank you for your help.

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Your Surface uses an internal lithium-ion battery designed to go wherever you go. The duration of your battery lasts varies according to the kind of things you do with your Surface.

  Please refer to the article for more information:

  Surface RT and 2 surface of the battery and the power

  You can also check: power plans: frequently asked questions

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• check the time line of root of a clip

  Hello

  Ive been looking around for an hour or two and not can't find something of this aid.

  IM using cs4 and actionscript 2.

  in my 2nd scene, I have a clip with a roll over button inside, I how can need this button to control the root timeline and navigate the site, I do this? This is what ive got and doesn't work-

  on (release) {}
  _root.gotoAndPlay ("main movie", 2);
  }

  Thanks for any help.

  Try to use only a label for the frame name, no number of scene or frame... Navigation for designs based on stage can be problematic.  It will save you a few questions if you design with the help of a scene.

• How to check the time remaining on the process to gather stats.

  I see how much time it will take to collect statistics.
  
  Thank you
  
  Published by: vhiware on February 12, 2010 16:03

  query V$ SESSION_LONGOPS

• Is it possible to keep the timer "always on top"?

  When you use the timer I like to keep the timer of disappearing from the screen saver, but I didn't understand how to do... If that's possible.  After the timer starts, he goes down to a few seconds and the clock face appears again.  To check the time remaining on the timer, you must click to the home screen and select new application timer... which, in few seconds again goes to the background and the face of the clock reappears, again he must open the clock app to see the remaining time.  If there is a way to keep the timer "on-top" without having to repeatedly touch the screen during execution of the timer, I have not discovered.  I would also add the timer to my eyes so I can toggle to him as well.  Of course, I can do it on my iPhone, but the Watch has not yet this ability.  Apple engineers could make sure with the timer and the timer if they see the need.  Are there others who want that ability as well?  I think so.

  Hello

  It is not currently possible to add Timer looks. However, your watch can be configured for more convenient use of the application of the timer:

  • Set your watch to return to the last app used to raise your wrist:
    • On your iPhone, in the application of the watch, go to: Watch My > General > wrist Detection - turn on.
    • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
      • Raise the topic on the wrist, select RESUME last activity.

  After you start a timer by opening the timer app, your watch will return to timer (for as long it remains the last app used) when you then lift your wrist.

  • Add a Timer to your dial of the watch as a complication. When you view the time on your watch:
    • Firmly press the display > drag left / right to the face of the watch you want to customize (not to slip if you want to customize the current face of the watch).
    • Press the Customize button.
    • Some watch faces offers more than one screen customization options > move left until you reach the last screen to select (if available) complications.
    • Tap a complication to customize what is shown in this place.
    • Turn the digital Crown to scroll through available there complications until you reach Timer.
    • Press the digital Crown, then press the dial to return.

  To start the timer directly from your watch dial, press the complication. Once started, the remaining time will be then showed complication on your watch until the end of the timer dial, when the application opens for you to make them disappear.

• How to get the time of the device

  Hello

  I'm developing an application in which I send location of the device in lat, long for every 10 minutes.  I want to send some time also with lat, long. This time must be peripheral situation updates for every 10 minutes.  Can someone tell me how do I do this?

  It is not obvious to your OP exactly what you ask.

  Ask you in a certain way a consistent recording time no matter what time zone are you in?

  Or are you just asking how to get the date and time?

  If it's the last QDateTime is one of the ways to get the date and time...

  http://developer.BlackBerry.com/native/reference/Cascades/QDateTime.html

  If you ask for the first answer more complex, you will probably need to check the time against an external clock (say GMT) and then re-reading use the contact information you have saved to determine what the weather was (including a calculation of DST) at this point in this particular time zone.

  Relying on the phone to change accurately that it is time that you move in time zones will not give accurate results.

• Problem with the configuration of the time in the Protection of VMware 5.5.6 and timezone data

  1 Al VDP connect the following appears:

  "The last request was rejected by the POS device."

  refers to the NTP settings.

  There is a difference of 17 minutes.

  2. While the NTP definition for my region cannot add Chile ntp.shoa.cl

  3. I can't change the date and time manually with hwclock

  4. when change Yask time with me, the following message appears:

  "Cannot update the dynamic configuration strategy."

  Please need help with this problem.

  Solution:

  1. check the time zone and NTP ESX resident POS configuration.

  2 (virtual appliance VDP) # vmware-tools service restart

• Set the time of ESX host

  Hello

  before that I have to download free 5.6 OPs of the trial, I used OPs 5.0.3 (Free Trial) in your Docs is States:

  "Time of the ESX host and the vCenter Server must be synchronized.

  In the Configuration without any server NTP tab I put a time but when go to Putty and connect to the host, and write the command 'date', the time is different from what I put.

  1 - is this problem due to lack NTP server?

  2 is it possible that I put the analytical UI VM and VM timezone to my zone schedule without host adjustment? (is this true?) (Is it that enough, I just set time zone of PAHO)

  Please help me

  Hello

  You must set the parameters of your ESXi host NTP.

  There is no timezoned in ESXi I know.

  Make sure when you look through the settings of Date and time on the ESXI host right now is what should be based on your local time.

  Let the time vC Ops to UCT. That should ensure the VAPP have the same time as the ESXI host.

  When you start the TIME you can check the time on the virtual computer is the same as hosts yoru.

• How do they see the time in milliseconds?

  Hi all

  I'm new to hearing.

  I just want to see the time (in the waveform window) in straight milliseconds. Is this possible? For example: my playhead is at a point in my audio file and in the lower left corner of the window, I see 1:20.123.

  My understanding is that, to find the point in milliseconds, I need to add 60 000 (the number of milliseconds in a minute) to the 20123. The equivalent to "1:20.123" millisecond is therefore 80123

  How can I configure display time hearing to show the 80123 instead of 1:20.123?

  Thank you very much!

  Hmm, you could probably set a custom of 1000 FPS frame rate, and then change the display format of sovereign to the option Custom Framerate.  It will be stil nickname timecode display: 00:00:80:123 = 80123 ms, but that would certainly be better to add 60 K each time you have to check the time.

  To change the frame rate and change the ruler display modes, right-click on the rule and choose time display > you can change the frequency of personalized images, as well as change the set to display this mode.

• Using AS2 to get the time and change according to result

  I need to make any changes to a flash projector which was built recently that changes of what is played according to the time of day. It is used to announce the breakfast or lunch/dinner for a restaurant. Previously we had put in place so that the time change happened at 5 in the morning and 10 o'clock in the morning. The code is below. The restaurant wants to change the time switch to be now at the half. I know how to extract the hours and minutes to do.

  This is the code that I've been using

  var currentHours:Date = new Date();
  var currentMin:Date = new Date();
  
  
  timeInHours = currentHours.getHours ();
  timeInMin = currentMin.getMinutes ();
  
  
  var today: Date = new Date();
  shownow = now.setMilliseconds;
  
  
  
  
  If (timeInHours > 4 & & timeInHours < 11) {}
  breakfast_mc._visible = true;
  breakfast_mc.play ();
  dinner_mc._visible = false;
  dinner_mc.stop() ;
  / / trace (timeInHours);
  } else {}
  breakfast_mc._visible = false;
  breakfast_mc.stop ();
  dinner_mc._visible = true;
  dinner_mc.play() ;
  / / trace (timeInHours);
  }
  trace (timeInHours);
  trace (timeInMin);
  Stop();
  Clips of film of breakfast and dinner have this code in them, as well as at the end of each cycle, it checks the time and switches.
  I found this code on Flash Kit, and wanted to try to change it, my hope, was so that he could generate a delay of 24 hours 1604 or 1029 I could then do a comparison <>/ with, but this function adds the numbers then 16:15 = 31 and 12:19 = 31 also. Does anyone have any suggestions on how I can do this
  ? I need time to change at 05:00 and 10:30.  There is a possibility that they will want to extend out to include the day of the week as well. Now I just need the fractional hours for works well.
  function checkTime()

  {

  dat var = new Date() ;

  var h = dat.getHours (); / / 24-hour format is already...

  mn var = dat.getMinutes ();

  / turn to the last limit of 15 minutes /

  //mn = Math.floor (minutes/15) * 15;

  
  

  / / OPTIONAL - add zeros to the hour and minute

  if (hr < 10)

  hr = "0" + hr;

  if (mn < 10)

  mn = "0" + mn; / / remove these last 4 lines if the zeros not significant not due not
  
  
  retour hr + mn ;
  }
  
  
  usage example:
  time = checkTime();
  trace (time);
  Any suggestions are welcome. Thanks in advance!

  If you want to do something when the user time is between 05:00 and 10:30, use:

  var d: Date = new Date();

  If ((d.getHours () > = 5 & d.getHours ()))<10) ||(d.gethours()=""><>

  No matter what

  }

• I can't use the link 'Check the seats' on Delta when I use Firefox, but Safari works fine. I get the message "not available at this time" when you use Firefox, but when I go on Safari it works just fine.

  I can't use the link 'Check the seats' on the website of Delta Airlines when I use Firefox, but Safari works fine. I get the message "not available at this time" when you use Firefox, but when I go on Safari it works just fine. I love Firefox but it sucks!

  This problem may be caused by corrupted cookies.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".
  • http://KB.mozillazine.org/cookies

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings