Using AS2 to get the time and change according to result

Similar Questions

• ETA App should help to get the time and date feature HELP!

  Hi everyone, I'm doing an application where I need to get the time and date of the antone device can help, I know there is a function such as getDate or getTime but im not to know how to use it.

  As far as I know,

  I use this to get the time system (it returns long type)

  System.currentTimeMillis();
  

  After that, you can use SimpleDateFormat to convert date and time

  SimpleDateFormat sdf = new SimpleDateFormat("dd.MM.yyyy, HH:mm");
  String time = sdf.format(new Date(System.currentTimeMilis()));
  

• How can I get the time and date appears on a sony cyber-shot camera

  How can I get the time and date appears on a sony cyber-shot camera

  Hi terpmarty,

  What is the model number of the Sony Cybershot camera?
  Instructions for superimposing the date and time are model specific. Some models do not have the ability to superimpose the date and time too. In such a case, you can use the supplied software Picture Motion Browser (PMB) or PlayMemories home (WPH) (Compatible with the Windows operating system) to print the date and time on pictures.

• My PC clock and date always change when I turn on the PC. How can I get the time to stay the same / correct?

  Hello. Not sure if I have come to the right place with my question. I have Windows XP Home Edition.  My PC clock and date change every time I turn on my PC.  I set the time and date when I turn it on, but then when the PC was interrupted and I next turn to the, (after a period of time) the time and date will be incorrect - a few months and hours.  I have looked for ways to solve this problem, but couldn't find anything.  Any suggestion would be appreciated. Thank you.

  Hi Anti-A,
   
  -Remember to make changes to your computer before this problem started to happen?
  -You are using a laptop or a desktop computer?
   
  Determine if the loss of time is the result of a weak computer battery. Follow these steps to do the same thing:

  a. click Start, point to programsand then click MS-DOS prompt.

  b. at the command prompt, type time and then press ENTER.

  c. compare this time with the time shown by the clock in the taskbar.

  d. Type exit and press ENTER.

  If the computer's time and the time on the clock are different, the computer's battery may be too low for accurate time, and it must be replaced. For more information on how to replace the battery, refer to the documentation that came with your computer.
   
  Follow the steps listed in the article below and check if it helps you fix the problem:
  Windows XP, waste of time

• Hello, the following problem, I use a PC, can not use Photoshop, you get the text following error message on the computer-Adobe Photoshop CC 2015 has stopped working "close the program". have uninstalled and installed a number of times, but the CC2015 wil

  Hello, the following problem, I use a PC, can not use Photoshop, you get the following error message on the computer-Adobe Photoshop CC 2015 has stopped working " ", "the program '. '. have uninstalled et installed a number sometimes but the CC2015 does not start anyway. Soren

  Please see:

  Re: adobe photoshop cc 2014 has stopped working in windows 8

  Re: Photoshop CC 2015 has stopped working

  https://www.YouTube.com/watch?v=0OUdIZT7C2E

  I hope this helps.

  Concerning

  Megha Rawat

• RunTimeException when you use the timer and TimerTask.

  In the switchNext() method, it changes an image and some text in a Vertical management. When I run the application, I get a RunTimeException. However, when I have not used the timer and tested the method switchNext() with just a button method worked perfectly. How can I make it work with timer or another class that he will call every 30 seconds?

   time = new Timer();
  TimerTask task = new TimerTask()
  {
  
  public void run()
  {
  
      switchNext();
  }
  };
  time.schedule(task, 10000);
  

  It would be useful to know what Exception you actually get.

  However, I think that it is indeed related to the fact IllegalStateException the TimerTask is running in the "bottom", and you try to update your User Interface.

  If you change the code as follows, it will work the method on the event Thread and so he has access to update the user interface.

  public void run()
  {
  UiApplication.getUiApplicat () .invokeLater (new Runnable()

  public void run() {}
  switchNext();

  }});
  }

  You can find more information on the event thread here:

  http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865

• automatic generation of the files using the time and date system

  Hi guys,.

  IAM trying to build a path for the creation of files automatically using system date and time. I'm running into errors with regard to the special characters in the file name. I'm trying to parse the string to get the date and time without the ' / 'and':' but have failed. is there a better way to do it? Help, please! I try to avoid a dialog box for the user to enter a file name.

  Thank you!

  V

  Here's a little experiment... may help build the %d (day) (month) of %m %(year) type stuff.

• I foolishly used my camcorder to the outside and the clips are too bright. How can I change the contrast on each of them in Movie Maker?

  I foolishly used my camcorder to the outside and the clips are too bright.  How can I change the contrast on each of them in Movie Maker?

  Use the effects... Decrease brightness / contrast down.

  Here are the steps to change all the clips on the timeline in a batch.

  Drag all the clips on the timeline... switch to... See the table of Storyboard.

  Reach... Edition / select all, or select an element and type... CTRL + A...

  Make a right click the effect you want to add and choose... Add to storyboard table.

  You can add up to 6 cases of an effect, but you need to left click
  a clip and "select all"... or type... Time of .ach Ctrl + A...

  It may take a little practice to master this, but it's easy once you see
  what he can do.

• In windows movie maker, failed to get the narration and music to play at the same time

  Hello
  I have followed the instructions to the T, but cannot get the narration and music to play at the same time.

  Hi Anataia,

  You are unable to play the music and narration at the same time, you can adjust the audio levels to determine which audio will play louder than the other in your movie.

  The audio settings by default in Windows Movie Maker is for the audio portion of imported video and any narration or music that you add to play at an equal level, but you can change that setting if it does not give you the balance that you want. To adjust the audio levels, follow these steps:

  1. Click on Tools, then the Audio levels.
  2. Do one of the following:
     • To increase the level of audio on the Audio track that is part of a video clip, drag the slider toward Audio from video.
     • To increase the level of audio that is located on the audio / music, drag the slider to Audio / Music.
  3. Click close.

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-narration-to-your-movie

  Hope this has been helpful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Change the time and date of deposit when importing

  Hi everyone, when I import images in my project, automatically first change date and time with the current date and time in the finder. So each imported file have changed the time and date when I search in the finder under the "created" or "modified" column, is this normal?. There is no way to avoid this?

  Thanks in advance

  Yes, you can prevent this! Go to the preferences of first and go to the media section. Uncheck "Write XMP IDS to files on import". Boom, done. First will not add his small beacon of metadata files when you import them. This isn't a huge deal for most publishers except Adobe apps could create media Cache files more than necessary if you re - use clips in other projects. Don't forget, however, anything, if you change the metadata (in the project Panel or metadata) file, it'll still change changed data for the clips.

• need to get the time host was put in the annotation and maintenance mode

  Hi - it is possible to get the time that a host has been in maintenance mode and also seize any annotation is attached to the ESX host in VC?

  Thank you

  ~ Sai

  Also, by using "get-vmhost" twice is redundant since you have channeled from get-vmhost: "E = { get-vmhost $_ |}". Get-vievent ".

  However, your order will be to return the entire event object and look like:

  Name                                    Event

  ----                                    -----

  host {VMware.Vim.EnteredMaintenanceModeEv...

  You can try below instead:

  Get-VMHost |? {$_. ConnectionState-match 'Maintenance'} | Select Name, @{N = 'Time put in MaintMode'; E={($_ | Get-VIEvent |? {$_. FullFormattedMessage-like"* entered maintenance mode *"} (). " Createduserid}}

  But it can still recover multiple events, so a way to get only the last event and time is below:

  Get-VMHost |? {$_. ConnectionState-match 'Maintenance'} | Select Name, @{N = 'Time put in MaintMode'; E={($_ | Get-VIEvent |? {$_. {"FullFormattedMessage-like" * entered maintenance mode * "} | toplayer-last 1). Createduserid}}

• What happened to the button on the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? I use it all the time and it is not on FF4.

  What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.

  If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)

• What is an application error, wmiprvse.exe? It keeps popping up all the time and its quite annoyinng. Can I get rid of him?

  What is an application error, wmiprvse.exe? It keeps popping up all the time and its pretty boring. Can I get rid of him?

  What this has to do with Windows Media?

  Rwillet,

  Thank you for visiting the Microsoft answers community.

  The wmiprvse.exe file is otherwise known as Windows Management Instrumentation.

  In research, I found a few articles that might help you:

  Windows wmiprvse.exe related errors

  Wmiprvse - wmiprvse.exe

  You can run your scan virus and if necessary, perform a System Restore to a point prior to the error occurring.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot use windows update, get the message "site has encountered a problem and cannot display the page you are trying to view.

  original title: can't use windows update, get the message 'the website has encountered a problem and cannot display the page you are trying to view. I am running xp. Can anyone help?

  I can't use the update. Still get the same message. Fix - it for Windows can not solve the problem. I am running xp. Help, please!

  Hi Hojo11779,

  You can see the mentioned knowledge base article and check.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Let us know if it helps.

• need to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista

  you want to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista. I have 3 accounts going 2 for children and one for the parents/administrator. I found ophcrack in several places on the computer. any help would be greatly appreciated

  The only question the idea of Malkeleah, that is when you put a password on BIOS, all you need to do is pop the battery from the motherboard and the password is gone. Faronics has in some programs such as anti-executable and a few other programs that may block the name or ID of a process and prevent it from running (some antiviruses have that option, such as Avast, but usually is a pain in the ass to configure)