Checkdisk analysis
After you restart the pc and running chkdsk. How do you find the results of the test?
http://www.cpucare.NET/OS/XP/viewing%20ChkDSk%20Results.htm
Tags: Windows
Similar Questions
-
Until a few days ago, this problem didn't exist - I know. My CD/DVD drive is no longer recognized in Windows Explorer, BIOS or Device Manager. It doesn't, however, appears briefly in Windows Explorer in the analysis of the security of the computer. It allows to open/close, etc. and when it is visible, I am able to open the drive and see the contents of the CD. Then it disappears again. The light flashes indicating that he works and I can hear it trying to read the CD. I uninstalled iTunes because I read somewhere that this may have been the issue - but that didn't work. I tried the system restore, registry cleaners, removal of upper/lower case filters from the registry, used the program Fixit found on the site Web of Microsofts etc and still no luck. Any ideas? The computer is a gateway SX2850 (?) with Windows 7 Home Premium installed.
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
Last month, my office has been freezing almost whenever I connect, I rebooted my laptop or close and turned on afterwards. The way I know that it is frozen is when my wifi icon is the blue loading circle and when I right click on my slider and it is located in the blue loading circle. Then after I do a restart hard (hold the power button and back - turn on my laptop), after the screen usual "the computer did not turned off properly", I see "scan disk" screen Even if I touch any key so analysis can run and maybe find the problem, the analysis is automatically cancelled. I pass this cycle at least twice before being able to use my computer properly.
I've had my laptop for 4 years. It is a Dell Inspiron N5010 Windows 7 Ultimate 64 - bit Intel Core i3 processor. For safety, I got Kaspersky Internet Security for one year. Is there anything that can be done to prevent it happening again?
Hello
You can check with Dell, their books online technical support, diagnostics,
and ask questions in the forums about known problems.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
==============================Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911Windows hangs or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">->
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">->
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at Applications.
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set
SEE drivers to hide Microsoft - update those without drain in their names. (Also
updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I try a checkdisk and get the message "Windows cannot check the drive while it is in use." Try to initialize checkdisk at startup (as advised by message). I get the message that "checkdisk cannot run because of recently installed software. Restoration and earlier version. "I have this and get the same messages. Any suggestions?
Hi,
Thanks for posting your question in the Microsoft Community.
From descriptions of the question, it seems that you are unable to run the check disk in your computer.
I imagine the inconvenience that you are experiencing. I'll help you fix the problem.
I see that you have after most of the troubleshooting steps to perform the disk check and are still unable to do so, but I suggest you to check the disk in the command prompt by using the Windows recovery environment (WinRE) to diagnose and solve problems from the link below.
What are the system recovery options in Windows 7?
:
http://Windows.Microsoft.com/en-CA/Windows7/what-are-the-system-recovery-options-in-Windows-7
Run the commands below
a. run Chkdsk in command prompt with administrative rights.
b. CHKDSK x: /F /R (this command will perform a complete analysis (including bad sectors) and an attempt to remedy)
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
For reference:
CHKDSK:
http://TechNet.Microsoft.com/en-us/library/bb491051.aspx
I hope that the information above helps you.
Your response is very important for us to ensure a proper resolution.
In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.
-
Hello
I have a problem with the app photo with Sierra.
I 107755 pictures. the analysis of people started
but he remains arrested with 519 photos
I tried to fix the bookstore. restart analysis but still stuck to 519 phoos.
Does anyone have the same problem and a solution?
Thank you
Thomas
How long it has been blocked? You have a very large library so I keep the Mac awake and fed and the Photos doesn't work does not and give him a few days - usually messing slows it rather than speeding it and is a 'restart Yvert"command
lN
-
I can't save analyses after you download Sierra OAS
I can't save analyses after you download Sierra OAS.
The "Save" button is grayed out?
Hello 2014anthony1,
Thank you for using communities of Apple Support.
I see that you can not save scans after updating to Mac OS Sierra. I would make sure I can save analysis too, I do a lot of scanning on my Mac. Let's work together and get this problem is resolved.
I suggest to use macOS Sierra: update or change the printer software, more precisely, that these sections:
Most printers are compatible with Mac OS. When you add a printer, Mac OS automatically uses AirPrint to connect to the printer or the printer software downloads (also called a printer driver).
If you can not use a printer that is already added, or you see not the options you want in the print dialog box, you can add the printer again with different or software to print settings different.
Add your printer with different parameters
Choose the Apple menu > System Preferences, and then click Printers and scanners.
Select your printer from the list, and then click the button Delete .
Click on the button Add and if a context menu appears, choose Add a printer or a Scanner.
A dialog box is displayed that lists all Hello, IP, printers directory shared, and open on your local network. It may take a minute or two for your printer to appear.
Select your printer, when it appears in the list, and then do one of the following:
Use AirPrint: Click on the drop down menu, then choose AirPrint (or Secure AirPrint). If AirPrint is not on the shortcut menu, the printer does not support it.
Use a printer software installed on your Mac or downloaded from Apple: Click on the drop down menu, then choose Select software.
The software to print a file on your Mac: Click on the dropdown menu, then select other. Select the file, and then click Add.
Update your printing software
If your printer is not how to use AirPrint, you can use Software Update to download the latest version of the software. If you don't do this, you see a message that software is not available when you connect your printer.
Choose the Apple menu > App Store, and then click updates.
Install the software updates that are listed for your printer.
If the software for your printer is not available using the software update, you can contact the manufacturer for more information. Maybe it's that your printer is not compatible with Mac OS. To check, see the article Apple Support printer and scanner software available for download.
If you install the printing software you don't have Apple, printing software can not be updated automatically when you use the software update.
Let us know if that helps. We'll help you get through this.
All the best!
-
BLOCK the POPUP is supposed to stop some analyses online. How to kill my popup block?
BLOCK the POPUP is supposed to stop some analyses online. How to kill my popup block?
< email published by host >
Safari > Preferences > Security > Web content:
Uncheck "block pop-up windows".
-
iOS 10 bed - sleep analysis does not
I use the new feature in iOS 10. The first night, he showed me a graphic analysis of sleep. But every other night, the alarm sleep wake up properly but there is no data from the analysis of sleep. The days are just empty.
I did disable the feature or did something else to change the settings. It is simply not show me how long I slept.
It is a disappointment - I was really looking forward to this feature. Anyone else having this problem, or am I missing something?
I wonder also how works the time of sunset. How she not analysis sleep? With the right movement? Should it be on my bed, or can it be on my bedside table? How this compares to an application like sleep work? I use for several months now, and it looks even better that bed IOS. Sleep wake me according to my cycle light sleeper, or only at the time, I put?
-
My MacBook 12 regularly gets an analysis of needs of Unix executable file names in her basket
My MacBook 12 regularly gets a Unix executable file named 'needsanalysis' in his trash. Anyone have any idea why? What is it? What can I do to stop what is happening?
I have two laptops on a an environment MBA 2011 and a 2016 MB and it happens on the latter. Both are on OSX 10.11.6
Thank you, Colin.
The executable "unix" just means that it doesn't have an extension for the operating system is not what it is. In addition, the executable bits are defined, so it may have been a case, but this info was lost, too.
Do you run all software anti-virus on them? I don't know what else would generate something that "needs analysis".
-
How to do a graphic logo
analysis of right to left on the screen in 10.2.3?
Animation of an object is done by applying keyframes for the parameter to be modified. In your case, you want to set two keyframes for the coordinate x: one at the beginning of your clip, with the object on the left side of the screen and the other to the ned of the clip with your object on the right side of the screen. Open the * system for FCPX and look for the video Animation. If you have no experience in animation control, the notions of keyframes and accelerations and trajectories can be quite confusing.
Presentation of video animation
With Final Cut Pro, you can create simple changes to the video over time, such as discoloration of the video of the invisible to the visible at the beginning of a movie. Or you can make sophisticated and precise settings over time, many individual parameters of effects video, transitions, trajectories and so on.
In Final Cut Pro, you use keys and handles images in Video Animation Editor to edit the effects in time of fade.
The key Word is the traditional workflow in the animation industry, where only important (key) frames of an animation sequence learned to sketch the movement of a character over time. Once the key frames were determined, an in-between artist drew all the frames between keyframes.
With Final Cut Pro, you can set parameters to specific values to specific times (represented by keyframes) and Final Cut Pro acts as an automatic in-between artist and in time real, calculating all values between your keyframes. For example, to animate a parameter, such as rotation or balance settings, you must create at least two keyframes in the clip. Final Cut Pro of figures on the value of the parameter between keyframes, creating a movement smooth as the setting changes.
-
Thunderbird has stopped working win 10 when I used Windows Defender instead of AVG - free
The event log to win 10 had many "ERROR!" Application Hang. "entries, all this said:
The version of the program 38.3.0.5749 thunderbird.exe ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the pants of control of security and maintenance
Process ID: 1acc
Start time: 01 d102e33137ce7e
Log name: Application
Source: Application Hang connected: 10/10/2015 00:45:36
Event ID: 1002 task category: (101)
Level: Error keywords: Classic
User: N/a computer VidAce
OpCode:Things returned to normal when I excluded thunderbird. EXE from analysis of sdefender of window operations. But it's dangerous for security. How to fix this please?
Thank you.Thunderbird is compatible with Windows 10. Defender problems are exactly that. Something that Microsoft needs to fix.
Regarding a malicious attachments go. What of them?
Before they can do any harm, they must be transformed into a binary file in the text, they are converted to attach them to the message and then be written in the Temp folder so they can be passed to the operating system with an application for opening of their. An antivirus program that cannot detect the payload of a newly written file and keep it opens is not worth the CPU cycles which is uses for to fail in its primary function. Defender claims to do this. If it isn't, still an issue for Microsoft. Now Thunderbird...
-
Thunderbird prevents mail from yahoo to email content analysis?
Mail Yahoo and g-mail scan the subscribers email content and the content of emails sent to subscribers. I think that it is a violation of privacy, I can't live with that. Thunderbird prevent Yahoo from the analysis of the content of the emails?
Is thunderbird software to access the e-mail but not email? Please explain if one needs an another e-mail or not, just thunderbird.
Thank you
C. ChronisThunderbird is the e-mail client software and not a supplier. It allows you to connect to your server from suppliers and manage your emails. It does not prevent your provider to do anything.
-
I can't print the Belarc PC analysis
I installed the Belarc program on my PC (Lenovo C540) operating system is Windows 8
The Belarc program scanned my PC and the result appears on the screen it looks like a symbol of Firefox that appears in the upper left corner
However, when I try to print (Hp Printer photosmasrt 5510) analysis a pop-up window States Firefox does not.
I can print text and images, so the problem is not with the printer.Please notify
Thank youHi DrJacques,
Thanks for posting your question on the support forum for Mozilla. I'm sorry to hear that there is a problem with printing while Firefox does not.
Forgive me if I do not understand the Belaric software, but it seems that it is within this program that you see this error. This also happens when you print directly from Firefox?
For example: file > print...
Is there a Firefox does not pop up? Please check the printer to reset preferences in the knowledge base article below:
Correction of the printing problems in Firefox -
Stabilization repeat dominant analysis of movement several times
I'm running 10.2.3 10.11.5 OS FCPX.
I have a project of seven minutes and trying to do a clip that is a minute and a half of stabilization. The "Dominant movement analysis" of this little clip repeats again and again and again. It is 100% and seems so all over again. After a few hours of this, I gave up.
I made auto disabled. However, even after running manually all made, the orange line continues to display above the clip and don't change after successive executions of dominant analysis of movement.
I am not very well informed about the stabilization, but I read that dominant analysis of movement is only meant to work once.
I don't use stabilization often (I slog along a tripod). This might work, however; It's a workflow rest of yore: bring your clip in its own separate project. Cut the clip to just the part you want to use more than one second of handles. To stabilize. Share the project as a master file, it will cook in the stabilization. Import the movie as a steady clip.
-
Is available or not for RSS bar analysis? He was a favorite of mine feature to stay connected without having to open a site on news or click on anything other than the title that interested me. If the analysis is no longer available, is there a page in order to get similar things to the old RSS feeds? Can it be done through FaceBook?
The only RSS feature in Firefox's live bookmarks.
For a news ticker, you've probably used an add-on like HeadlinesTicker.
As far as I know, this is the only news ticker Add on available (another one, NewsBar seems to be obsolete and non-functional in the latest version of Firefox). However, there are several other RSS reader modules that display news in formats other than a news ticker.
- https://addons.Mozilla.org/firefox/addon/bamboo-feed-reader/
- https://addons.Mozilla.org/firefox/addon/NewsFox/
You can also subscribe to feeds through web sites as follows.
Maybe you are looking for
-
How accurate is the information gathered by the activity monitor web family security?
for example, looking at the user interface, there no way to tell (that I can see) which is a HTML file which has been specifically requested, and which settled called from this file (images, ads, etc.). Is this information stored somewhere and displ
-
HP dv6z-7200 Envy: upgrade memory for HP Envy dv6z-7200
Hello I want to upgrade my memory of 16 GB of RAM. Can someone tell me what is compatible with my laptop? A specific question: 204 pins or 240? Product suggestions would be great. Thank you very much.
-
Need help with the Advisor Windows 7
I have a Dell Dimension 9100 runnings XP sp3. The Advisor gives me the following warnings: Version of Messenger 4.7.03001 has known problems Should I update? The link only takes me to the Microsoft Web site. CyberLink PowerDVD 5.0 - paid made availab
-
I want to display the Nikon D7000 .nef files in Windows Explorer/widows Webcam live picture and use some ice with them in Windows Vista. I think that Microsoft's current camera raw codec not support.nef files from Nikon D7000. Furthermore, I would al
-
881w - lost in the wireless configuration. -need help
Hello I'm new with this kind of wifi router. I am quite lost in the configuration, I try to read the documentation, etc... but still he lost. Currently, if I have a notebook wired to 192.168.0.10 I ping my gateway 192.168.0.1 With wifi, I have an IP