Checkerboard to fluid without restarting

Similar Questions

• Cannot move the divs checkerboard to fluid

  I use Dreamweaver CS6 in OS X Mavericks.

  When I build pages checkerboard to fluid I seem to reach a point where I can enter is no longer div boxes to the left or right to resize. Is it because you cannot change a fluid grid from a template?

  Thank you

  Joshua

  It probably has more to do with where you put your custom styles.

  The fluid grid css is extremely fragile. Small issues in this file can cause DW to stop recognizing nature GFL your page quite easily. It is recommended, if you are not, use a separate external stylesheet of the fluid grid css for all of your custom style to prevent break accidentally.

  Aside from that, it is difficult to help without seeing the code of the pages you use. Their download to a location to test on your server and share a link here are the best way to get accurate answers.

• How do you know hyperthreading enabled or disabled on the Windows 2003 EE server without restarting the server to the BIOS setting

  a small question:

  I have a server with AMD64 (8 CPUs), ~2.3GHz, I want to know if Hyperthrreading is enabled or not, how can I check the setting without restarting the server?
  I am about if HT enabled will allow the server to get better performance?
  Thank you
  -Mulu

  Hello

  The question you posted would be better suited in the TechNet support forum. I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• ADE 3.0 crashes on Windows 7.  Transfer screen continues to operate. Cannot close ADE without restarting the computer.

  ADE 3.0 under Windows 7.  If I transfer a book at my e-reader, the screen freezes in the 'transfer' and seems to keep loading even if the book is already present in the drive.  Cannot close ADE without restarting the computer.

  Right click to the digital edition and run as admin.

• Checkerboard to fluid question

  the other day, I created a checkerboard to fluid.  He published via FTP and it worked fine.   Today, I made some changes to the page and they look good on dreamweaver.   When I save and publish, none of the changes appear on the site.   Are there other files I need to record with grid of liquid to make it work?

  I think my problem was there are actually two files "new.html.   With a Capital of N with a small "n".

  I deleted both.  renamed little n.  Then re-released.   It works now.   Thanks for the help.   just enough of a sudden boost to help it along.

• Checkerboard to fluid, I've hidden 2 < div > mobile layout. How do I find them?

  Checkerboard to fluid, I've hidden 2 < div > mobile layout. How do I find them?

  Hi howie.c.design,

  Just to clarify this point a bit more for you:

  (1) for the class trained elements (that is, you spent a class name while inserting)-> DW Adds a class like 'hide_tablet', 'hide_mobile' and 'hide_desktop' for each of the respective provision.

  for example:

  This is the content of the div layout "div".

  That is why by deleting just the same source code will make the visible element in the respective display.

  (2) for the ID-driven elements (that is to say you had a code name while inserting)-> DW sets the property to display for this selector in a particular window as none.

  IE as shown on the image of "sally_em" above #featurest a the display property set to none.

  This property of compensation will be show the item.

  We know it's good for the ideal workflow and we are working on the provision of an interface allowing to achieve the same through the user interface.

  It will be available soon.

• Mobile without restarting DATA file?

  Hello
  
  I extended the Tablespace and my error, I added one of the data file in this place: /oracle prododuct /- as shown below. I have not updated + symbol while adding the file, for example, Alter tablespace add datafile '+ DATA01;
  All other data files are stored on DISKGROUP + DATA01.
  
  Can I move this data file to the same location as the other files without restarting the database or anything like that? I saw in log backup script to database auto that all data files are included that I added, but not this one (/ oracle /... / DATA01)
  

  /oracle/app/product/11.2.0.2/db/dbs/DATA01                                                    AVAILABLE                    103809024
  +DATA01/db1/datafile/t.330.778438371                                                         AVAILABLE                    103809024
  +DATA01/db1/datafile/t.329.778438389                                                         AVAILABLE                    103809024

  Secondly, how can I find this location on the machine for example to display the created on DISKGROUP of DATA01/db1/datafile/t.330.778438371 DATA01 data file.
  
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production # RedHat Linux 5.
  With the options of partitioning and Automatic Storage Management
  
  
  Thank you much for the help.
  
  Concerning

  910385 wrote:
  Hello

  Thank you very much for the reply.

  I was about to make according to your suggestions. My concern is that:

  RMAN>
  - Alter database datafile datafile_name offline # OK
  - Copy '/oracle/../DATA01' to '+DATA01'. # OK
  

  My question is: How can I find out the full path of the file after copying to ASM Diskgroup to RENAME THE FILE and makes it again online? # As you said KEEP a NOTE... How would I do it please?

  Once you move your ASM diskgroup data file. Show upcoming prompt RMANoutput. He will say that data is copied to the asm diskgroup and he himself will get you the full path. Just pay attention to coming to rman quick exit

• Using of checkerboard to fluid and a mobile site, or load smaller images for mobile.

  Question for a beginner:

  You can use checkerboard to fluid for Tablet and desktop, while having a mobile site?

  The problem will be the loading time.  I use a tool for css/js called Magic360 to display of large plates 3d products.  It requires 72 images, but works very well with the fluid grid.

  My understanding is the grid will load the images full size, but scaling to fit the screen.  Go from office to Tablet would be acceptable, but mobile would be much slower compared to a dedicated site.

  Another option would be to have the small images to load mobile within the grid of fluid, but I don't know if it's possible.  Thank you for any assistance.  I'm watching a ton of videos on lynda.com to learn the basics and progress.

  -James Thornton

  Put your large images in #slideshow - LG and smaller images in #slideshow - SM. use media queries to show/hide the divisions.   Use a separate external stylesheet for that.  You don't want to alter master key or FluidGrid.css files.

  / Special rules for mobile devices * /.

  @media only screen and (max-width: 480px) {}

  / * Hide div * /.

  #slideshow - LG {display: none ;}}

  / * display div * /.

  #slideshow - DMS {display: block ;}}

  }

  / * Rules for tablets, desktop computers * /.

  @media only screen and (min-width: 481px) {}

  / * Hide div * /.

  #slideshow - DMS {display: none ;}}

  / * display div * /.

  #slideshow - LG {display: block ;}}

  }

  Nancy O.

• Toolbar options of div not displayed correctly checkerboard to fluid

  When I select an element inserted checkerboard to fluid, the options to hide, duplicate, or delete the Div will not displayed. I don't have the arrow "move up a line" is displayed. How do other options to display the mini toolbar? My version of DW CS6 is new V12.0 Build 5861.

  

  It is called the "Smart HUD" and has been available to update the CCM (Creative cloudiness) 12.2. Your version is 12.0 that resembles a regular permit of no-cloud.

  You are actually a subscriber to creative cloud? If this isn't the case, you will need to wait for a perpetual license upgrade in order to see / use this feature.

• Checkerboard to fluid - columns later adjustment

  Is there a way to add/subtract the "columns" in a fluid grid presentation after that development has already started? The company wanted to add another element and make it fit properly, I need several columns of rose. Is there a way to do all along, or you can just at the beginning when you select file > new checkerboard to fluid? Thank you!

  Hi samantha.m,

  Currently there is no way to change the number of columns on the fly, but we have a request to this effect in the pipeline.

  I can offer a work around, but it's a risk (if not done correctly) long shot.

  Here are the details:

  FG framework computes them percent widths etc based on the number of columns that were calculated during the creation of the page.

  Therefore, you can

  (1) in your file fluid CSS change the value for the Office columns to '11' :->  ' dw-num-OCOL-Office: 11;

  (2) save this file and html and close and reopen. (Please note that this will break your layout in the viewport Office temporarily)

  (3) create a dummy page with 11 columns, then lets say if you want your first div (on the actual page of column 5)-> and then add a 5 column div to this dummy page

  (4) copy the % and replace it in the actual page width property.

  (5) the same operation can be repeated for other divs.

  (6) similar steps can be repeated for % margin's.

  as I said earlier, it's a little risky, but once you understand the action it can lead to 11 steps to the max.

• get utc time in oracle without restarting the session

  Hello world
  
  I need to get utc time in oracle without restarting the session. Now I get what type:
  
  Select double sessiontimezone;
  
  In the new session, I'm sessiontimezone exact value, for example, I live in Istanbul, Turkey and there + 02:00. But last Saturday, this value is passed to 03:00. If a session that was created only, when I call sessiontimezone, back + 03:00, this is true.
  
  But, if I call sessiontimezone, I see + 02:00 in a session that created it before last Saturday night.
  
  What should I do to get the value real sessiontimezone without restarting the session?

  do you want to time UTC, you can use...

  select systimestamp at time zone 'UTC' from dual
  

  This will give always the hour UTC

  Ravi Kumar

• AirPlay does not connect without restarting the computer

  Hey guys,.

  I work in a school and all teachers have a MacBook Air 2011 or newer running 10.10.5 or newer. Many also have Apple TV connected to projectors so that they can use AirPlay to reflect their computers to projectors. So here's the problem:

  A couple of my professors can connect to their Apple TV and use without problems, but when they log off of Apple TV, the image of airtime in the bar of menus remains blue (which is normal when AirPlay is enabled). The problem is teachers are unable to reconnect to the Apple TV because the computer thinks it is still connected. Restart the computer to log in again!

  The computer will display the Apple TV as a device which we can connect to, but it never connects once it has been disconnected. It is a problem because teachers often connect to view a video and then disconnect so that they can work on their computers. If they try to reconnect, they need to restart their MacBook Air.

  ATV is up-to-date. Has been restarted and connected to another network and always has the same question. Not sure if this is ATV related or associated with MacBook Air. The two devices are connected to the same network that has no restrictions.

  I think I've cracked it because I had the same problem and since there are 2 minutes I solved it.

  Open activity monitor

  Click on the tab network and research AirPlayXPCHelper.

  This quick process and fact.

  Not sure if you have to do each time it stops working, but it is much faster that restarting your computer.

• Taskbar to guard endangered and cant get it back with/without restart!

  My taskbar to guard disappearing randomly and don't won't come until I restart.  Once I restart the taskbar comes back and then disappears again. I looked at other solutions of people with similar problems and solutions do not work.

  My taskbar to guard disappearing randomly and don't won't come until I restart.  Once I restart the taskbar comes back and then disappears again. I looked at other solutions of people with similar problems and solutions do not work.

  Open the Task Manager (Ctrl + Alt + Delete, click Task Manager)
  Click file > new task (run) and enter "explorer.exe" (without the quotes)
  And then click OK.

  He comes back?
  VP Tech Services

• uninstall without restarting the device, OS4.2

  is this possible?

  read:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/What_Is...

  in this context, have written a simple test application which hangs herself in various processes of the BB system as follows:

  Session.getDefaultInstance () .addFolderListener (oMyFolderListener);

  BlackBerryPIMList oTaskList = (BlackBerryPIMList) PIM.getInstance () .openPIMList (PIM. TODO_LIST, PIM. READ_WRITE);

  oTaskList.addListener (oMyPIMTaskListener)

  Application.getApplication () .addGlobalEventListener (oMyGlobalEventListener);

  Then, in response to a request from the user interface of unloading, my test application does the following:

  Session.getDefaultInstance () .getStore () .removeFolderListener (oMyFolderListener);

  BlackBerryPIMList oTaskList = (BlackBerryPIMList) PIM.getInstance () .openPIMList (PIM. TODO_LIST, PIM. READ_WRITE);

  oTaskList.removeListener (oMyPIMTaskListener);

  Application.getApplication () .removeGlobalEventListener (oMyGlobalEventListener);

  Then I can happliy proceed to the Options-> Advanced Options-> Applications, choose my application and delete it * without * a fearsome re - start. Everything is good so far!

  However,.

  If I want to set up the following system BB hooks:

  ApplicationMenuItemRepository.getInstance () .addMenuItem (ApplicationMenuItemRepository.MENUITEM_MESSAGE_LIST, oMyMenuItem);

  Session.addViewListener (oMyEmailOpenCloseListener);

  And the answer to my UI test app unload application, follow these steps:

  ApplicationMenuItemRepository.getInstance () .removeMenuItem (ApplicationMenuItemRepository.MENUITEM_MESSAGE_LIST, oMyMenuItem);

  Session.removeViewListener (oEmailOpenCloseListener);

  Guess what? -When I go to delete the test application, I now need to restart? -Why?

  The foregoing certainly * have * been dropped out of the BB system somehow. They no longer appear in the menu display of BB app list Messages or receive events opening/closing, but somehow, it would seem that a reference to my objects is still being detained. How can I delete it? Is this a bug?

  -Have you tried invoking the garbage collector system.GC() but no luck.

  Brilliant ideas people or will he fall once more to the poor Mark Sohm have to say, it cannot be done...

  resolved/hacked - kill the BB application.

  -If for example wrt says:

  Session.addViewListener (oMyEmailOpenCloseListener);

  In my oMyEmailOpenCloseListener object, I defined my own unload event handler detaches from the BB App messages that first and then he kills, like this:

  Session.removeViewListener (this);

  .

  .

  System.Exit (0);

  -bingo, no more no required reference, lol

• How difficult peripheral USB not recognized without restarting

  Hello

  Sometimes, when I re plug a USB 2 or 3 times, appear a notification message (unrecognized USB device...) and I have to restart my computer to make it work again.
  I want to know how to fix this problem without having to restart my computer and I don't want the solution when I uninstall all devices in Device Manager, because other usb devices can be connected and working at the same time, I can perhaps just to restart a service or kill a process...?

  Hello

  -Did you do any changes made on the computewr before this problem?
   
  Method 1: I suggest you to run the troubleshooter in the below mentioned link and check.
  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2: I suggest update you also the chipset and other drivers from the website manufactuerr and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  For reference:
  Tips for solving problems with USB (Applicable for Windows 7) devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  Hope this information helps.