ADE 3.0 crashes on Windows 7. Transfer screen continues to operate. Cannot close ADE without restarting the computer.
ADE 3.0 under Windows 7. If I transfer a book at my e-reader, the screen freezes in the 'transfer' and seems to keep loading even if the book is already present in the drive. Cannot close ADE without restarting the computer.
Right click to the digital edition and run as admin.
Tags: Adobe
Similar Questions
-
Cannot update Windows Vista, with the update functionality.
Hey Charley,
Welcome to the Microsoft Community and thanks for posting the question.
According to the description, you can not install Windows updates.
This problem can occur because of inconsistencies in Windows Update.
Perform the steps from the link below and see if it helps.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/( )
Warning of Chkdsk.
Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.Hope this information helps.
Answer to us if you have problems with Windows Update or any other issue of Windows, and we would be happy to help you.
Good day!
-
Update Windows automatically restarts the computer. I would like to disable this feature.
Update Windows automatically restarts the computer. I would like to disable this feature. I'm running a machine business with complex projects requiring a configuration long and delicate. The details below:
Type of operating system: Windows 7 Ultimate
Problem: Status of the project lost after auto restart during the night
Require: A method of disabling automatic restart after an automatic update is happening.
Tried: I already tried looking in the registry for an appropriate key change, but no have been found appropriate.Aelryn,
You can configure Windows update to meet your needs, for example, download the update and then let me choose when to install the same. This way you always get the automatic updates but you chose when and where and how to install updates at a time that is convenient.Then I suggest to change the Automatic Updates settings to meet the needs of PAHO.
Choice, you can turn off to THE (not recommended), you can adjust to download updates only and allow you to install them at a convenient time, you can adjust information only, or you can leave to do what he likes.
If you update, you must restart sometime in the case otherwise you are not protected and you might as well do not update at all. Everything is a matter of choice. One size does not fit all, so a choice can be made. I have updates informed me only, then I decide what, when and how to do to install the updates. It's my choice.
FYI -.
http://blogs.technet.com/Mu/archive/2008/10/02/Windows-Update-and-automatic-reboots.aspx
TaurArian [MVP] 2005-2010 - Update Services -
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
Hey
PeLon416
If you have problems with the gateway recovery process, you will need to contact Gateway
It's their recovery process not microsofts
You may have a hardware problem
support of bridge at the link below
http://support.gateway.com/support/default.aspx
Walter, the time zone traveller
-
* Original title: Vista 32-bit SP1
I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.
Hello
Thanks for posting your query in the Microsoft Community Forums.
According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.
I will certainly help you with this issue.
This problem may occur if one of the following conditions is true:
a. a program on your computer interfered with the installation of the service pack.
b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.
Here are a few articles that you can consult in order to solve the problem.
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
How to obtain the latest Windows Vista service pack
Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions
Solve the problems when you can't install Internet Explorer 9
If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.
-
Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?
Hello
Method 1:
You can run the fixit. Check out the following link.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2:
You can run the fix provided in the link and check out them.
Resolve security issues to protect and secure Windows automatically
http://support.Microsoft.com/mats/windows_security_diagnostic/Method 3:
You can read the following article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.Method 4:
I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Updates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questionsIt will be useful. -
I was invited by what looked like a legitimate update notification. After update, it asked me to restart the computer. The computer hangs above the screen. I tried Start Up repair without result.
Alton
Hi AltonChewning,
Please see the following thread similar with a possible fix:
I hope this helps!
-
I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help
tan7655,
If I read this correctly, you have a portable computer that do not have an operating system on it. You try to install Vista and get the error.
You've restarted the Vista installation? So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista? You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I was doing a reformat of the factory for windows vista on the laptop of my son (packard bell EasyNote LJ 65) when the battery is dead and the computer turned off. When I started it back up it gives the message: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation.
Everything I try, I get no further than this message, I don't know where to go to continue the installation. The computer does not see that the installation was not completed. I tried to enter the menu with F9 where I had to do the reformatting of the factory of windows but it will not give me the option to continue installation, it shows just the vista Windows, but when I click brings back me to the error message
Help, please!http://support.PackardBell.com/UK/
For questions about the recovery process, contact the manufacturer of the computer.
This isn't their recovery process, Microsoft.
See you soon. Mick Murphy - Microsoft partner
-
How can I configure my windows 7 after restoring my laptop to the factory conditians?
My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.You should try another recovery.
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
-
HP Desktop, Windows 8.0. Do a restore of Windows 8 on the hard drive. Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box. Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all. Finally resorted to restore to get the computer working again.
How to exit this loop?
OK, here's what I discovered.
When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key. This will put you in the command prompt.
At the command prompt, type: bcdedit [then press enter]
so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]
This put the loop I lived and finished restoring Windows 8
-
When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.
Hi silvers.
Please make sure that your graphics card and Lightroom 6 are up-to-date. Latest version of Lightroom is 6.4.
Please check the FAQ and troubleshooting of Adobe Lightroom GPU and disable the use of the GPU in Lightroom.
What is your operating system?
Kind regards
Assani
-
Windows XP crashes and freezes. I receive Stop errors that say I can't restore the computer.
I have a Windows xp that fails and frequently freezes when I restart my computer, it says it was a stop error that I can not restore the computer because its been there for months and I don't know when to return to I'm pretty certain that it was a virus, but whenever I go to scan the computer , it crashes can anyone help me with this problem?
original title: help with freezes and freezesHelloTry following the steps described in this guide: http://www.selectrealsecurity.com/slow-computerIt provides detailed instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.Brian -
Explorer crashes randomly on windows 7 64 bit. Have to restart the computer to correct.
Hi, I read the related discussions but don't know what the problem is or how to diagnose.
Recently, windows Explorer crashes and the only solution is to completely restart my computer.
It will work again for a while then crash.
Ctrl alt del doesn't show windows Explorer, so I can't turn it off.
Surfing the internet, some people say the shell extensions are the problem and to turn them off, but they all want allows you to download the software from their Web sites to show extensions... I am wary of downloading something from someone, I don't know if have not done this.
Not sure that the problem is... computer is completely up to date.
I think that the problem may have begun because the last windows update but I can't be sure.
Any help would be appreciated... can't keep turning off my computer during the day!
Thank you
I think I have the answer. Has taken ALL DAY!
Malware.
About four months ago, I downloaded something nasty. It was very obvious that the toolbar in internet explore was changed etc.
Immediately contacted Symantec (I have Norton Internet Security): paid $100 to remove the offender to ensure. Did not see pictures weird or redirected to websites unwanted:
Thought I'd hired a professional and the work was well done!
Just pay a (larger) another sum to Lenovo. They took almost four hours to determine and correct the problem and the culprit was the remains of the VERY SAME malware, buried deep! I never had the problem of a virus.
OK now I want only a little (okay, big) RANT.
Things seem to be working very well now. Symantec and asked for a refund. Also to check why it is not removed correctly in the first place. He said probably, I downloaded the malware even once again and they only guarantee their work for 7 days. How was I supposed to know that the pieces have been buried deep into my computer, causing havoc, that nothing was visible?
To have Microsoft hired but Lenovo at least offer a one year support plan. Apparently, Microsoft will sell only support plans to Americans, non-Canadian (said to me on the phone when they offered the package and discovered then I lived in the Canada and withdrew the offer, would NOT take my money).
Thanks for trying to help, they offer honest help. This rant is not directed against you.
I am of course not at all happy at hundreds of dollars and hours spent being at the other end of the "guilty client game" the supposed expert virus (Symantec) and apparently being the Canada excludes the purchase of a paid Microsoft support plan (Americans are of course welcome to spend their money with Microsoft).
-
I click on save a file.
The download window appear.
Mozilla froze before the download icon.
I close and open it and it froze again.
Restart my computer.
Open Mozilla and it works.
Have to do it every time I have to download a file.It is possible that your antivirus software is corrupt downloaded files or otherwise interfere with the download of files by Firefox.
Try disabling analysis in real time (live) files in your software anti-virus temporarily to see if that makes working download.See "Antivirus disable in Firefox preferences - Windows."
See also:
Maybe you are looking for
-
Firefox 33.1 constantly no longer works and indicates "Not responding."
Firefox no longer works (hang up) and reports program is "Not responding" frequently - sometimes every few minutes. Audit memory shows that this is not a problem. I don't want to reset Firefox to factory settings and lose the customization. This prob
-
List of burner windows dvd maker, no burners are shown. my cd - rw drive does not work properly. Creation of dvd uses a different burner? How I'd get it in the list of burner?
-
Upgrade hard drive for computer laptop dv6626us
I searched for the hard drive on my laptop dv6626us upgrades. When I read the comments they seem to all be positive with regard to the replacement of my current (factory loaded hard drive). One of the concerns is that the computer has been delivered
-
Because I listen to audio books where each track is long between 60 and 120 minutes, it is necessary to interrupt the audio and "resume" at a later date. This function worked correctly on my old BB Pearl, but the torch, he simply forgets it was susp
-
What does a red exclamation mark next to an average of sent message?