AirPlay does not connect without restarting the computer

Similar Questions

• Printer does not print to restart the computer

  My LasterJet Pro 400 M401dn (new) print only when the computer is restarted. I changed the USB cables, USB ports, turn off sleep on my Toshiba laptop utility. I use Windows 7. Other previously directly attached printers worked fine.

  Within 4-5 minutes to restart, I am unable to print. When I restart the documents in the print queue to print very well.

  Any help would be appreciated!

  Julie

  Hey JAGSM,

  Which driver you use with the printer?  Have you installed the driver full features here?

  Or

  Have you installed the driver of the UPD on the same page?

  I would try this printer uninstallation and reinstallation.  Try the full functionality and UPD to see if it is a driver compatibility problem that leads to this problem.

• System Restore - question: the computer is not protected. Restart the computer and restoring the system running again. "

  When I run the SYSTEM restore, I get the following message: "the computer is not protected. Restart the computer and restoring the system running again. "I already did and it does not help.  I have Dell Windows XP

  Hello

  Try this link it may be useful you http://www.kellys-korner-xp.com/xp_restore.htm

  Under the heading, enable and disable the system restore... Reg fix?

  Also, it wouldn't hurt to run for malware, spyware, etc...

  Concerning

  GT4U

• ADE 3.0 crashes on Windows 7.  Transfer screen continues to operate. Cannot close ADE without restarting the computer.

  ADE 3.0 under Windows 7.  If I transfer a book at my e-reader, the screen freezes in the 'transfer' and seems to keep loading even if the book is already present in the drive.  Cannot close ADE without restarting the computer.

  Right click to the digital edition and run as admin.

• AirPlay does not connect to remote speakers

  I have a mbp 10.11.3 and iTunes does not connect to my remote speakers via airplay.  Neither my wing will connect either.  My another mbp, old people will connect with aerodynamic profile, but iTunes does not connect on this computer.  The machines to connect to a network with two base stations.  The Airport Express is about 12 years old and is not taken in charge by the Airport utility, so I don't think I can do a lot with who else than rebooting, but if I do that, it can never connect to the network again.  It is plugged into speakers with a 1/8th inch socket, and it pulls its power supply ethernet that comes from a time capsule.

  In any case, any ideas on how to reconnect to the Airfoil speakers and iTunes?

  The Airport Express is about 12 years old and is not supported in Airport utility

  From my experience the AirPort Express has a "useful" life of 5 years. If yours is 12, congratulations! However, I think that this fact it is probably a failure and why you do you restore. What are the numbers of models of your base stations?

  Are both of your Mbps running OS X El Capitan?

  Let me assure you that I understand your current network configuration. Please let me know which of the following are correct:

  • Your current network consists of both a Time Capsule and AirPort Express base stations.
  • The Capsule is your "main" base station It would be directly connected to your Internet modem by Ethernet.
  • One of the Express base station is connected to the Capsule by Ethernet.
  • The other is set to extend the time Capsule wireless or simply to join the wireless network. Which is correct?

• "Send to" does not work and freezes the computer

  new problem on my xp machine. my "send to" does not... as in... when that I right click on something, a menu is open. Everything in this menu works very well... EXCEPT the ' send to '. If I even put my cursor on the "send to", it freezes the computer. I worked on this problem for 2 days. Do some web research extended, tried 6 or 7 different things... still no solution. Any thoughts?

  Hello

  1. What troubleshooting steps did you follow in order to solve the problem?
  2. You did changes to the computer before the show?

  Try the methods provided below and check if the problem persists.

  Method 1:

  Clean boot

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and then click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2:

  Scan of the SFC

  SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• 1102w does not connect correctly to the Airport Extreme Base station (Time Capsule) (wireless)

  & #3; I've been troubleshooting all day on this problem for my parents, trying to set up printing wireless for them on their new HP 1102W. I am trying to connect the printer wireless to their Airport Time Capsule base station. Using the WPS configuration, the printer is recognized by the base station, but I'm still not able to print wirelessly or via airprint. Enter the web configuration via USB, I see that the printer is grateful the network, but it doesn't have an IP address (it is set to auto/DHCP). Later I tried to connect to a shared of my iphone, wifi connection and everything worked perfectly, so the problem is that somehow the printer will not connect properly to the Airport base station. I tried several resets and restarts the printer and the base station, and the printer and the base of the station has new firmware. I also tried to change the security on the terminal of the default wpa2 personal wireless with wpa/wpa2 personal.

  I'd appreciate comments on this issue because I am quite frustrated now :-)

  Using the tool of the airport, I logged on to the base station and changed the wifi settings, while 2.4 and 5 ghz networks have different names instead of identical names standard. That did the trick, eventually I just configured the printer using wps in a few minutes.
  
  Thanks for your help.

• my camera does not need drivers but the computer said I do

  I have a pqi usb flash drive 8 gig and said it should not be the drivers, but the computer says that can anyone help please.

  Hi Vanessa,

  Welcome to the Microsoft community.

  It seems that you are facing problems with the USB (Universal Serial Bus) device; We're here to help. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. What is the model of the PQI USB flash drive?

  4. what happens when you plug in the flash drive?

  When you use any compatible plug-and-play device, Windows 7 automatically installs the driver. However, you can follow these methods if you are always faced with the question:

  Method 1:

  I suggest for the link and try to run the Troubleshooter:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  The article also applies to the Windows 7 operating system.

  Method 2:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Lumetri does not connect automatically to the LUT

  Hey!
  I'm using an AE project, I did not start the project. The guy already color classified video. I'm recovering what he was doing. This project was created for the correction of color with Lumetri on AE. The problem is that the entrance READ does not automatically bind to the LUT. Same thing for parts of 'creative Look '.
  I asked the person who starts the project what LUT he used. I now have the LUT entry correct.
  I don't always have the good 'creative Look', cause on his project in front of 'Look', he wrote "Custom".

  Can we found that look had been used?

  Thank you

  Yes thank you, that was the problem. Solved by re-downloading the CC2015.2.

• Creative cloud does not remember IDs after the computer restarts

  Creative cloud app does not remember login after restart of the computer, or simply when it starts after having turned it on. The app starts up fine and appears in the notification area (Windows 64-bit 10), but I have to log each time until I can get updates, etc. This problem started about 3 weeks ago and I still have to find a solution. Does anyone know how to fix this?

  In this case I advise you to Contact customer services as technical troubleshooting may be required.

• Windows Vista clocks works slowly and does not reset correctly when the computer is restarted.

  I can reset the clock via the server of internet time and after about an hour, he begins to lose time.  When you restart the laptop, the clock is not properly reset the CMOS.  I don't think I have battery problems since the clock loses time if connected to power or not.

  Thanks for the reply David.  I'm not sure that replacing the CMOS battery in a laptop is simple.  I'd appreciate an information change in a notebook Acer Aspire.

  Here is the link:

  How do I replace the CMOS battery in an Acer laptop
  http://www.ehow.com/how_4882009_replace-CMOS-battery-Acer-laptop.html

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The network bridge does not connect after resume the S3, Windows 7 x 64 & x 86.

  I installed a network bridge between my wireless network card and a local LAN port on my motherboard, I have my xbox connected to the LAN port and the wireless card has the connection to the internet.  Everything works as expected and I have full access to the internet on PC and xbox.  Issues occurs when I upgraded my PC to sleep and then wake the system, wireless connection works as expected and can see my router but the network bridge not be re - not connecting, I have to disable the bridge then turn it back on until it will work...
  The same Vista configuration worked without problem.

  I'm having the same problem as you, I'm trying to use my laptop to connect my Xbox 360 to my wireless network. It works very well, I have to disable and then re-enable the Miniport MAC bridge or a connection to the Local network after every sleep sleep before that it will work again.

  I noticed that I can not ping even the Xbox until one of these actions is carried out, I don't think that it is actually a problem with the network bridge, but with the ethernet connection (Marvell Yukon 88E8038 PCI-E Fast Ethernet Controller for me). I agree I think that it is an OS problem because I also do not experience the problem with ICS but then cannot be a State of NAT open for the 360.

  An obvious solution is a script that you can run to disable and re-enable the connection to the Local network, someone there at least an easy way to do this?

  EDIT: actually I think I just solved the problem by doing exactly the opposite of what I saw as the solution proposed several other places.

  1. open Device Manager

  2. Select the network adapters, find your ethernet card, do a right click on it and go to properties

  3. click on the power management tab.

  4. make sure that the "allow the computer to turn off this device to save power" box IS COCHEE

  5. apply the settings, and then click OK.

  FACT

  I hope this helps you.

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• Printer does not print without saving the file first

  Whenever I try to print an article I have to register all began as before that I could request a printing and in the left pane, at the top, it looks like 'print', but now it is said that 'save' what I have to do to correct and be able to print without saving the first element. I have a Brother MFC-J5910DW all-in-one. Excellent machine.

  Hello Geoff,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the Print Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please also update the printer drivers from this link and check.

  http://support.brother.com/g/b/downloadend.aspx?c=us&lang=en&prod=mfcj5910dw_all&OS=93&dlid=dlf004746_000&flang=8&Type3=11

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• iPhone 6s more does not connect Internet (wifi) for computer

  I bought my iPhone 6 s more, March 1, 2016 and I had too much give in the service of apple to see what it was when first it wouldn't connect to iTunes and sharing network from the phone. They checked and found no problem but my iPhone won't share Internet from my phone to my computer (return my phone today). the computer detects my phone but not able to connect to the network? What can I do because this is the second time I have trouble with an iPhone that is brand new!

  How do you try to connect your phone to your computer? Do you want the computer to use the Internet connection on your iPhone? To do that you must contact your carrier and make sure that "tethering" is activated on your iPhone account. Then turn on the 'Personal Hotspot' (in settings/iCloud.) Your computer should then see your iPhone as a wireless router. See this for more information: share your Internet connection with Personal Hotspot - Apple Support