Problem with the configuration of the time in the Protection of VMware 5.5.6 and timezone data

Similar Questions

• Problem with the video for "VMware vSphere Hypervisor - install and configure.

  Hello

  In this page: https://my.vmware.com/group/vmware/evalcenter?lp=default & p = free-esxi5

  When you click on the "Installation and configuration" tab, we have access to videos for vSphere Hypervisor.

  But at the moment, none of the video can be shown.  I tried this in my computer at home as well as my company computer and none works.

  Someone who works for VMware please check this problem.

  Thank you

  OK, I just found what was "wrong".  These videos are "optimized" for Internet Explorer!   Yes, I tried on Firefox and Chrome on XP Pro and Win7, nothing worked.  Then after reading your message, I thought ' what happens if I try that? "  ... and indeed, the videos are displayed inside, I.e. I got suddenly a bad feeling, like I was back at the beginning of the 21st century!

  Come on!  Who would still do 'optimized' only website to know today?   I'm sure they will not be displayed on my Tablet either.

  I found these videos on YouTube:

  http://www.YouTube.com/watch?v=Xss_2Qx51fU

  http://www.YouTube.com/watch?v=adrO7SXyjBE

  http://www.YouTube.com/watch?v=8lkMIqgfOj0

  http://www.YouTube.com/watch?v=ZHUjDWpHJvU

  http://www.YouTube.com/watch?v=_MofPJsG9gQ

  I think they are the same videos (but the quality is really bad... 360 p.: geez!).  Could someone confirm that they are indeed the same as those in vmware.com?  THX

  PS: Oh, on the section "Help", I found it at help | United States but I've seen no paragraph telling me how to report a problem on the website.

• Problem with the start of VMware ESXi 5.0

  I just installed VMware ESXi 5.0 on a new Cisco UCS B200 series blade with two 300 GB hard drives configured in a RAID 1 mirror.  I went through and completed the installation of VMware ESXi 5.0 on this server.  When the installation is complete and the server restarted, he did not initiate the ESXi where I can change the IP address and VLAN.  Instead, I get this text string after the initial boot sequence that is shown in the attachment.  I have a guest who said Shell > do not know why I can not start correctly in ESXi 5.0.  Thank you!  Paul

  Hi Paul,.

  Looks like you boot to the EFI shell. What is the startup policy that you have configured on this server service profile? It should look like the one below.  If there is a problem with the boot order, you should be able to type "EXIT", then enter on the EFI shell to exit the prompt. If your startup is similar to the one below and you still experience this issue, try to downgrade and re - ack the blade.

  Let me know if it helps.

  

• Problem with the 2007 Hallmark card studio deluxe installation and get error message "Error 1904.Module that cannot save c:\windows\syswow64\msxml4dll".

  Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff

  I want to install hallmark card studio deluxe 2007 and I got this message

  C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.

  Someone knows how to fix this?

  Thank you

  Hi Roman,.

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. deal with any issue when installing any other program?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest to perform the clean boot and see if you can install the software.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  Method 3:
  If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.
  Follow the steps to clear the temp folder:

  a. click the Start button and in the search in %temp% bar and press ENTER.

  b. the Temp folder opens, press on Ctrl + A , and then press delete.

  Note: I suggest that you backup important file or a folder in the Temp folder.

  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problems with the upgrade to Windows Windows 7 10 and get the message 'could not be updated. "portable

  Original title: Windows 7

  I have 2 questions-

  I have a laptop Windows 7 when I tried to update Windows 10 received a message that it could not be updated.  Has there never been a solution or an update for those of us who have a version of Windows 7 which initially could not updated for Windows 10?

  I have a computer I upgraded Windows 10 and really like it.  I do not understand that I can not make a copy of 10 Windows on a computer, I've updated for Windows 10.  Is it possible for me to download a copy of Windows 10 on my laptop Windows 7 to make a restore CD in the case of a computer problem?

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  You also have the possibility to choose 'Keep personal files only', which guarantees a successful in most cases installation.

• I'm having a problem with the windows vista service Pack 1 download and installation.

  KB936330

  The error Code is 800F081F
  Code 800F081F
  When I run windows update as it says it's a pack recommended important I need, and then when I try to download and install it won't get this error just keeps popping up. Also, saying: unknown error.

  If someone please tell me the solution?

  Hi Berto5097,

  Thank you for using Microsoft Vista answers Forum!

  The following are possible causes of this problem:

  ·         A program on your computer interfered with the installation of the service pack.

  ·         There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Take a look at the article, follow the steps from there to solve this problem

  http://support.Microsoft.com/kb/947366

  If please reply and let us know if your problem is resolved or if you need more help

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Problem with the display of pictures of USB ports and CD player!

  I'm having a problem with my USB port and CD player.  I tried to put a USB stick and card reader in both slots USB and a CD in the CD drive, and whenever the prompt appears, as it did before, asking me what I would like to take.  In the box gray top of page it says "Windows can perform the same action whenever you insert a disk or connect a device with this kind of file:

  Photos

  What do you want Windows to do? »

  Then in the white box below, it is totally blank, without options, where, as he used to give me several options.

  Can someone help me please?  I would really appreciate that I have a photo tour to finish as soon as possible, and I need to get my pictures on the PC!

  Thank you very much!

  Hello

  · What is the service pack installed on the computer?

  · Do you have any software installed on the third CD burning?

  · Do you remember all the recent changes on the computer before the show?

  1. If you have any software installed on the computer of third-party CD burning temporarily uninstall the software and check the results.

  2. you can also run the Autoplay Repair Wizard and check if it helps. You can download the tool from the link below: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=c680a7b6-e8fa-45c4-a171-1b389cfacdad

• Problems with the update of Windows on Windows 8 and also updated to Windows 8.1.

  Original title: update windows 8 to 8.1

  I really hate this computer is a laptop HP 2000 I got it from a friend and the place its been annoying the * out of me, I try to install the KB update, so I can skip all the other updates and I get an error of BS I use windows update, and I get 188 updates and when im installing the 180th update just white out and stops off the coast while he was on the charger, so I start backup it and now its stuck in an endless loop with the "configuration of the updates to Windows restore changes Failure" he was giving me an infinite loop of spinning points and all I want is to install windows on that 10

  Hi Giovanni,.

  Thank you for your response with the current state of the question.

  I suggest you try directly upgrade to Windows 10 of Windows 8 through the media creation tool.

  I recommend you to check the system requirements for the installation of 10 Windows on the computer.

  https://www.Microsoft.com/en-in/Windows/Windows-10-specifications

  Also communicate with the computer manufacturing and try to confirm if your computer is compatible to install Windows 10 or not.

  If your computer meets all the system requirements, I suggest to use the media creation tool in the link below and choose the option PC this upgrading to Windows 10. Before moving to Windows 10, I recommend you make a backup of important files and folders on the external hard drive.

  https://www.Microsoft.com/en-in/software-download/home

  Let us know if you need further assistance on related issues of Windows and we will be happy to help you.

• Problems with the module supplier of personalized identification information and overview of VMware View Client working together

  I have a Horizon of VMware View client that connects me HVD Windows 7. So when I give view client Vmware Horizon my credentials, it auto logs me. I also created a custom credential provider that works on Windows 7 PC. When I install the custom in the HVD credentials provider, it works if I am already connected to HVD and I simulate CTRL + ALT + DELETE. Can I use my credential provider to "unlock" in. However, if I disconnect of HVD and try to connect using VMware Horizon View client to connect to Windows 7 of HVD, it gets stuck on the screen of the tile. I see the VMware SSO user tile but nothing happens when I click it. Then, I use my provider of customized credentials to connect. I expect to bypass my ISP credentials on the first connection and self as before.

  Anyone have any ideas?

  Thanks for your help.

  OK, I did some more troubleshooting and discovered that it was a problem with auto connection set to TRUE on my side of custom credentials provider (I pbAutoLogonWithDefault to TRUE). Since I still like it TRUE, I had originally set it to FALSE and then change for REAL once my credential provider was used.

  Thank you!

• Problems with the new host VMware ESXi 5.0

  We have a dell blade chassis, with 4 710 blades and 8 610 the 710's have 12 network cards and the 610's have only 6 network adapters. I added a new host on one of the 610's and two network adapters in each of the networks belonging to virtual infrastructure. 1 mgmt 2. ISCSI 3. vmnetwork

  My problem is that the new host can see all the resources but I can't move the VM from the hosts to the host 610 710. I get an error because nic 2 on the 710 host is not in the same network as nic 2 on the 610. It seems silly that I wouldn't be able to do that just because the hardware is not identicle.

  I have three vswitches, vswitch0 for management, vswitch1 for the iSCSI network of shared storage, vswitch2 for the network of the vm.

  Thanks for any help.

  Steven Reeves

  Systems engineer

  Shasta College

  [email protected]

  Material is not identical not should not have an impact.

  The vSwitch port group to which are connected the NICs in question is named identically on both hosts?  If they have a different name, vSphere considers different networks.

• Problems with the computer automatically recording of surrounding sounds and play loudly on Windows 10.

  Original title: Sound

  Hey,.

  My laptop records the surrounding sounds and plays loudly and I have no idea how to turn it off.

  I hope someone can help me.

  ASUS X555L, Windows 8

  Hi Felix,.

  Thank you for your response with the current state of the question.

  I suggest you to make pregnant as default device and also keep microphone also disable.

  1. right click on the sound icon that is in the lower left corner of your screen under the system icons.

  2. Select the playback device.

  3. click on the Read tab, and then select a speaker from the list and then click set as default.

  Let us know if you need further assistance on related issues of Windows and we will be happy to help you.

• Problems with the audio on websites like Vimeo, Instagram, and Google Doodle

  There is no audio when I watch videos on websites like Vimeo and Instagram.

  When you play this Google Doodle there also no audio.
  of http://www.google.com/Doodles/Doctor-Who-50e-anniversaire

  I have no problem audio when you browse these websites with Internet Explorer though.

  I assume that you have started the game and see the timer running?

  You can click on the Volume icon in the Windows taskbar near the clock and click on the link to mix down to open the mixing console.
  
  You can adjust the volume level for each application in this window, so make sure that Firefox is not set to mute or set at a low level.
  
  Firefox uses the process of plugin-container to run plugins, check the volume control for the process of plugin-container.
  
  You will see the program Firefox or the Plugin Container in the mixer if you are on a website that plays sound.

  See also:

  • https://support.Mozilla.org/KB/fix-common-audio-and-video-issues

• I have a problem with the mouse cursor moving left to right and not conversely when switching between screens.

  Original title: change the direction of the mouse moves from the main screen to the external monitor

  My mouse movements from left to right when moving from one screen to the other, I want that he move right left how do that change

  Hi Jayson Bourne,

  Welcome to the Microsoft community. According to the description of problem cursor mouse moves from left to right and not vice versa when switching between screens. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the mouse?

  I'll help you with this problem. I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  Change the settings of the mouse

  Method 2: Update the latest drivers/software for the mouse.

  Updated a hardware driver that is not working properly

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

  There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

  Hi gljatlaw,

  I see that you are having problems of quality of scan.  I'll take a look at the document below.

  Scan quality

  Let me know how it goes.

• Problems with the Protection of DVD - RW write to new blank DVDs, I just bought!

  I use AVS Video Editor to make a wedding video, but when I try to burn on a DVD - RW blank (from a lot of regular Maxell DVD - RW I bought from Argos) she kept saying "the disk is write protected", and it won't let me do anything. Even when I went and formatted DVD - RW on my wife's cell phone, mine still wouldn't recognize it. What should I do?

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/mats#tab2
  --
  ..
  --
  "ajh17" wrote in message news: 3d0fcfa9-f367-423a-b7b6-7f2e8a3a0173...
  > I use AVS Video Editor to make a wedding video, but when I try to burn
  > it on a Virgin DVD - RW (in the lot of ordinary Maxell DVD - RW, I just
  (> bought from Argos) kept saying "the disk is write protected" and it
  > don't let me do anything. Even when I went and formatted DVD - RW on my
  > mobile wife, mine still does not recognize it. What should I do?
  >