Checking version CinePlayer start or Log In

Similar Questions

• Firefox downloads to date, but when I restarts his stays in the previous version and starts to redownload update again. IM on version 38

  Firefox said I can update. After I download update and reboot it is always on the same version and starts to download update again. IM on 38 channel update version beta version

  38 of Firefox is the current version.

  • https://www.Mozilla.org/en-us/Firefox/38.0/releasenotes/

  Your list of details of the system shows that you have a user.js file in the profile folder to initialize prefs each time you start Firefox.
  The user.js file is present than if you or another software has created this file and normally it wouldn't be here.

  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  • http://KB.mozillazine.org/Preferences_not_saved

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• HAB check failed for start / could not validate the boot image

  Hello

  I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

  HAB check failed to start

  could not validate the boot image

  Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

  Are there opportunities for the device?

  If you can't make an external reset via hardware buttons, then your phone will have to service.

• I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade to the latest version and start using the universal or complex theme?

  I have a server/database running Application Express 4.1.1 and a server/database active Application Express 4.2.0. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Hi DJake,

  DJake wrote:

  I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Please read the documentation of the requirement for Oracle APEX 5. Ensure that your environment meets these requirements. Upgrade your oracle database or other software if necessary components and then you can go right 4.1/4.2 to 5.0 update according to the above-discussed upgrade strategies in the above discussions.

  Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/pre_require.htm#HTMIG376

  You should go for upgrade of the Oracle APEX of 4.1 to 5.x. Regression test your applications to remove if any errors introduced by upgrade. The kickoff of a new project to migrate your applications to universal theme.

  Reference:

  • Re: upgrading to 5.0 - best practices
  • Re: APEX late upgrade
  • https://www.YouTube.com/watch?v=o8S4bg4Vo0A

  Kind regards

  Kiran

• How to check when a user last logged on vCentre

  Hi all

  Is there anyway to check when a user is logged into/out of the vCentre?  I checked task/event also sessions but this does not tell you when the users are logged in/out.  Basically, I'm looking to find security audits.

  The part of events of tasks & events you will get this information.  You may need to increase the page size for the tasks and events, you lie down search window.  In the toolbar above, click edit - client settings-lists tab.  Change the size of the page to something bigger, maybe 50

• How to check versions fusion middleware R12

  Hello
  
  Can somebody answer how to check versions fusion middleware R12?
  
  Kind regards
  Christophe

  Salvation;

  Please check Hussein snoussi previous great post, your answer in

  version of the middleware
  version of the middleware

  Respect of
  HELIOS

• Check the configuration of Redo Log Archives to

  DB version: 10 gr 2, 11 2 GR
  Version of the operating system: Solaris 5.10, AIX 6.1
  
  While allowing for a DB from Production 2 node RAC, I made a mistake specifying LOG_ARCHIVE_DEST (a typing error).
  
  After I brought the DB to the top (open) after you have enabled archiving, I tested the journal using switching

  SQL> alter system switch logfile;
  
  System altered

  and had no error.
  
  Later, I realized, archiving does not work. But I wonder, why I have no error for

  SQL> alter system switch logfile;

  Errors may have been recorded in the log of alerts. Since then I have no error from sqlplus to the command above, I thought everything was fine.
  
  But the following command triggered error.
  

  SQL> ALTER SYSTEM ARCHIVE LOG CURRENT;
  ALTER SYSTEM ARCHIVE LOG CURRENT
  *
  ERROR at line 1:
  ORA-16038: log 4 sequence# 127 cannot be archived
  ORA-00254: error in archive control string ''
  ORA-00312: online log 4 thread 2: '+LTMPROD_DATA/LTMPROD/redo04.log'
  ORA-15173: entry 'ltmprod_arch' does not exist in directory '/'

  Should what command I use to ensure that activation of Archive was successful?

  Hello

  Any more ways on how professional to check whether the archive allowing a success?

  ALWAYS... After putting data in ARCHIVE MODE, you must force the newspaper archive database.

  SQL > ARCHIVE LOG LIST; # To check status
  
  SQL > ALTER SYSTEM ARCHIVE LOG CURRENT; # This command must be executed sucessfull.
  
  Query V$ARCHIVE_LOG or use RMAN to check path/location of ARCHIVELOG. 
  
  $ rman target /
  RMAN > LIST ARCHIVELOG ALL; 
  

  Use ARCHIVE LOG SWITCH LOGFILE command to force again them to archive the disk, because they have a slight difference.

  JOURNAL of ARCHIVING is synchronous, this command waits until the online redo log has completed writing the log file again the file system, if again is not archived error is thrown on command prompt.

  SWITCH LOGFILE is asynchronous, this command start only switch / archive run in the background if ARCH process cannot finish writing the archivelog directory on file the error not returned not invite since he was released.

  You can use this technical note:
  * How to enable archiving ON and OFF [ID 69739.1] *.

  Hope this helps,
  Levi Pereira

  Published by: Levi Pereira on September 23, 2011 01:28

• Cannot start the log viewer/event event on vista - error 3 service

  Hi all

  I tried to load the file, eventvwr.msc in the folder system32 directly, and administrator tools, but I get:

  "the event log service is unavailable. Check that the service is running. »

  then I try to start the event log service, program services.msc.
  whenever I try to start windows services event log, I get the message:

  "Windows didn't start the service on the local computer's windows event log."
  Error 3: the system does not have the specified path. »

  How can I specify the path?
  or
  How can I solve the problem?

  any help would be appreciated please - thank you

  The file size may be small, but zipping, it is a good idea because some hosts do not allow the download. REG file types. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• When I close my browser, firefox connects not me off gmail even if I haven't checked "remember me" when I logged in.

  Exactly what the said issue - my browser doesn't connect to gmail when I close my browser. I have deleted all the cookies/cache, restarted my computer, connected repeatedly WITHOUT checking the box ' remember me ' and he still remember me. This wasn't happening, but only started happening recently.

  In Options -> general , you have Firefox " show my windows and tabs from last time ' value? If so, this restores your last browsing session, as if you had not closed the browser.

  If you choose a homepage to display at startup, your previous session must be removed as usual (although it can still be recovered for a short time with history-> restore previous Session).

• Internet connected but get the message to check internet connections. Cannot log on to remote servers...

  I am trying to connect to i-tunes and TurboTax.  I am connected to the Internet and can get to the two sites and move in them; However, I can't connect to the itunes store, I get the message of Itunes can't connect to the Itunes store.  The network connection was refused.  I get the message similar to TurboTax.  I was able to connect to both now and and I'm sure many others.  I am also unable to connect Wiindows Live even trouble message with my internet connections.  I need help! I'm to the point that I'm going to put my laptop to factory and lose everything, and I really don't want to do that.

  Hello

  1. what version of Windows is installed on the computer?

  2. what browser you use to access these sites?

  3. If Internet Explorer, what version of IE are you using?

  4. are you aware of any changes made to the computer, before the show?

  Method 1:

  I suggest to add Web sites to the trusted list in Internet Explorer and check.

  Security zones: adding or removing websites

  http://Windows.Microsoft.com/en-us/Windows-Vista/security-zones-adding-or-removing-websites

  Method 2:

  You can try to clear your history of navigation and control.

  Clear the history of websites you've visited

  http://Windows.Microsoft.com/en-us/Windows-Vista/clear-the-history-of-websites-you visited

  Method 3:

  I suggest to reset Internet Explorer and check.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  I hope this helps.

• Check Version of DirectX with directxdiagnostictool, I don't see the Advanced button or troubleshooting

  original title: directxdiagnostic

  Hello

  To check the Version of DirectX with directxdiagnostictool, I don't see the Advanced button or troubleshooting. I signed up as an administrator. Clues or suggestions on how to make this tool available in case I need? Vista Home Premium with IE9 is installed.

  Thank you very much.

  Allie

  Hi, Allie,

  Tool changed with Windows Vista.  If a problem is identified, it will appear in the box - Notes

  http://Windows.Microsoft.com/en-us/Windows-Vista/run-DirectX-Diagnostic-tool

  Troubleshooting tools and strategies

  http://TechNet.Microsoft.com/en-us/library/cc938991.aspx

• Anyone running McAfee LiveSafe please check version.

  I've got 13.6. Version control is out of the home page under everything down right. The version is for the Security Center itself that so-called account. Also if you run CHECK FOR UPDATES (from the right mouse button on the icon on the Systray McAfee) he says that there is an update?

  I'm "stuck" worm. 13.6 and I need 14.0 worm. that was disclosed by McAfee to solve a problem of Thunderbird and this version is also necessary for W10 apparently.

  Supposedly Dell's worm. 14.0 but has not published, at least I can't find it or update it.

  Does anyone have this version?

  It seems OK, it was just updated today...

  

• check error when start the game after downloading the jad/jar by OTA on BB 8300

  Should I wear a for BB 8800 version J2ME Java game. So far the alx/jad/cod format works fine on BB devices, such as 8800, 8300, 8310. Now I have to commit a jad/jar format. I make the version using proguard 3.8 and WTK22 preverify. On BB 8800, the jad/jar can be downloaded to the device, when it is running the game, there is an error msg 'Error at startup xxxx xxxx for Module a verification error at offset xxxx xxxx', the version is OK on BB 8310, but failed on BB 8800 and 8300.It is so strange. I'm trying to do the version using the preverify CAP and failed once again, use 3.3.2 proguard / 3.7 failed too. It seems that it is a consistent problem.

  I check the article 'Support - MIDlet has error checking to offset' and have no harvest.

  How to fix the bug?

  Thanks for your help.

  Use rapc.exe to jar with proguard not preverify, I corrected the bug. There maybe some problems during transfer cod jar in the device.

• Could you stop doing checking version on the plugins?

  I understand you are trying to help some users get viruses, but I run linux and development stopped at version 11 for linux, so I can't update flash. The constant messages are very annoying and confuses people that I helped to switch to linux. After using Firefox since mosaic days financially supported the project, I'm disappointed that I'm now being forced to use Chrome instead of Firefox.

  Hello Timcredible, for Linux, Flash 11.2.202.425 is not vulnerable according to Adobe and it is not listed.

  https://www.Adobe.com/products/flashplayer/distribution3.html

  11.2.202.424 and low https://addons.mozilla.org/en-us/firefox/blocked/p796 are blocked

  Thank you