I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

Similar Questions

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• error 1075 the dependency service does not exist or has been marked for removing windows xp

  The DHCP Client has stopped, but it is configured to start automatically.  When I try to reboot, I get the following message: error 1075 the dependency service does not exist or has been marked for deletion.  I need help to solve this problem.  Because of this problem, I can not connect to the internet.  My connection continues to try to acquire a network address and I lost my IP address.  I need help to fix this error on my Windows XP machine.  Thank you!

  See if this article solves your problem:

  "Error message when you start the DHCP Client service on a Windows XP-based computer:"error 1075.
    <>http://support.Microsoft.com/kb/915162 >

  HTH,
  JW

• error 1075 the dependency service does not exist or has been marked for deletion

  Im trying to find solutions for this error with windows vista. The only solutions with microsoft in the VISTA section is for xp machines. Go figure. Im trying to reboot the Client DHCP service and this is the error I get. (error 1075 the dependency service does not exist or has been marked for deletion). I tried to fix the registry key to match a working vista machine, but it did not work. This is the registry that I corrected. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP

  Just delete the registry entry and restart the system. It should work perfectly. It worked for me.

  1. Click Start, click run, type regedit in the Open box, and then click OK.
  2. In the registry editor, find and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP
  3. Right click on the entry DependOnService , and then click remove instead of change

• How to solve error 1075 the dependency service does not exist or has been marked as deleted by sharing my internet conection as temporary ad - hoc wifi connection? Windows 7

  For 6 months I have been successfully using my based ad hoc temporary internet connection wifi connection to aid Assistant ICS (internet connection sharing) on my computer laptop windows7, but last night my microsoft security essential antivrus detected and removed Trojan win64 sirefef. "" B and after that, I have this error 1075 "the dependency service does not exist or has been marked as deleted" whenever I tried to make the new ad - hoc wifi based connection to share my main internet connection for my other devices

  I was looking for a response, and since I met the same sirefef of virus variants. (x), after the removal of virus, that I remembered the place, that he has done.

  C:\WINDOWS\Microsoft.NET\assembly\GAC_MSIL

  As a solution, I think that if a system component is damaged I shuould fix first.

  In fact, I did a full upgrade to Windows 7 (build even) with the OS DVD.

  I must mention about the extraordinary capabilities of Windows 7 on the upgrade.

  After all the upgrade process which took about 2 hours to "Installation of Windows 7" discovered that .NET framework 4.0 is damaged and repaired. And I could start ICS.

  Without all this hassle if you could try to reinstall .net Framework 4.0, I think that this problem will disappear.

• Get the error 'windows' failed to start the spooler service on local computer, error 1075 printing when you try to install a printer.

  Hi, printer "spooler".

  IM using widows vista, I had a problem installing my printer, can not install because that the problem with 'spooler service', followed the advice of microsoft and went to services, a window apears, "windows could not start the spooler service on local computer, error 1075 printing;"the dependency service does not exist or has been marked for deletion"can help you please?

  Hello pedro,

  We will remove and reinstall the printer:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Also, here are some links about printing reference:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• I just updated my photoshop to 13 and I'm unable to install/download. How can I get the said product to install?

  I just updated my photoshop to 13 and I'm unable to install/download. How can I get the said product to install?

  Hi tonyaw,

  Please install Photoshop 13 (CS6) from the following link: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  Kind regards

  Tanuj

• Error 1075 coil dependacy service does not exist or has marked the removal of the form

  Have a Cannon printer who worked again for more than 12 months.  I have a moment, she does not handle and I receieved a notice that the error 1075, identified as a dependency service doesn't exist or has been marked for deletion.  I went on a Microsoft program that checked my complete system and came up with the answer PRINT SPOOLER NOT CONNECTED may NOT HELP.  I worked on this problem for two weeks check other sources on the Internet successfully.  Is the answer to this situation TO REMOVE MY WINDOWS XP PROGRAM AND re-install.

  There is another way from a command prompt, enter:

  sc qc spooler

  and you'll see everything:

  XR | GetServiceConfig SUCCESS

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STARTUP TYPE: 2 AUTO_START
  ERROR_CONTROL: 1 NORMAL
  BINARY_PATH_NAME: C:\WINDOWS\system32\spoolsv.exe
  LOAD_ORDER_GROUP: SpoolerGroup
  TAG                : 0
  Display_name: Print spooler
  DEPENDENCIES: rpcss
  SERVICE_START_NAME: LocalSystem

• I have a Dell V305 printer scanner. The printer works fine. When I try to scan it says list of applications to download and then he said: it couldn't download the list. I don't know what to do.

  I tried everything to make it work. Reference Dell wanted to charge me 234.00 for them correct errors on my computer where the printer does not respond to my computer. I don't have a disk for the printer when you purchase my system. I restored to factory default and now the printer works fine. All windows updates are made. But somethis does not go with the scanner. Please someone help me!

  Update to the latest version of the driver: http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?DriverId=R264821&FileId=2731112408

  and the latest firmware: http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?DriverId=R205586&FileId=2731123538

  can help.

• Error 1705: the dependency service does not exist or has been marked for deletion

  When I tried to restart the window 2008 Server service: "remote desktop virtualization host agent" then the error of the object turned.

  and the client computer to outernet can not remote connect to the server, the error appeared as the below:

  

  Please help me.

  Thank you very much.

  Hello

  You can ask your question here for assistance:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

• even if I create an image of large scale when I save in png and try to zoom his as dimmed and pixels are like big boxes, so if I print I get the original photo of clarity that I created in photoshop?

  unknown

  If you create a document 5000 x 5000 pixel, added text on the subject, then it would print in nearly 20 "x 20" at 250PPI and text would be reasonably strong.

  Note: If your image is enlarged to a much smaller size it will be pixelated. You must add the text after enlarging the image or start by creating the largest size document from the beginning.

• When I try to download/install a lot of programs, I get the error message «could not access network % APPDATA%\ location» ». Wonder what I should do to fix this problem.

  This occurs when you try to install things like Adobe, Microsoft Office 2010, my printer Installer, etc.

  These difficulty his deal with this problem:

  http://support.Microsoft.com/kb/2258121

  http://support.Microsoft.com/kb/886549

  If the problem persists, try to create a new administrator account and that helps to install programs.

• Network is inactive: the dependency service or group could not start

  After you install windows vista sp1 on my new computer dell laptop, network lan connection is not active and when the mouse via the network sign in the notification area in the taskbar, the following error message appears:

  The dependency service or group was able to start.

  When you check the services, I found the following services should be started automatically but currently has started:

  DHCP client
  Network list service
  Network location awareness service
  NTRU TSS v1.2.1.27 tcs

  When you try to start one of them, get the error that the dependency service is not provided on except this one:

  Network location awareness, trying, start getting the following error: Windows cannt start local service...

  I checked the event log and found a number of errors like:

  -----------------
  Failed to initialize the Security Kerberos for authentication package on the server side. The data field contains the error number.

  -----------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  --------------------------

  The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005. This is often caused by incorrect security settings in the process of the writer or the applicant.

  Operation:

  Data collection of Writer

  Context:

  Writer class ID: {e8132975-6f93-4464-a53e-1050253ae220}

  Author name: System Writer

  Writer Instance ID: {855aa7e1-4b71-4448-bae8-84e347d26b85}

  -----------------------

  Network list Service service depends on the network location awareness service which failed to start because of the following error:

  The service has returned a service-specific error code.

  --------------------------

  NTRU TSS v1.2.1.27 TCS depends on the TPM Base Services service which failed to start because of the following error:

  The service has not been started.

  -----------------------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  And this last error repeats several times...

  Please help solve this problem as soon as you can, its really serios error.

  Awahaba

  This article explains how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista. It describes how to use the System File Checker tool to analyze and replace system files in scenarios where you are troubleshooting a problem in Windows Vista: http://support.microsoft.com/kb/936212/

  You might analyze you the computer to check for malicious software that could of damaged service this type are suggested anti-malware analysis: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• The network is acive: the dependency service or group could start.

  I can't go on the internet. The States Center network and sharing "service dependency or group falied to start." I have not performed a scan of malwar no chance. SFC scan/now found no errors. I did system restore and no luck. I checked the service and the "network Locatio Awareness" will not start I get the following error "Windows has no start the network location awareness service" error 1075: the dependency service does not exist or has been marked for deletion. I checked said etil depends on the RPC and the Protocol TCP/IP drivers and the two are running.

  Hi Anthony_1982,

  1. you remember recent changes to the computer?

  2. using a wired or wireless?

  You can try to check if the problem occurs in safe mode with network.

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can also try to use the Network Diagnostics in Windows Vista and check.
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-doctor-is-in-using-Network-Diagnostics-in-Windows-Vista

  Hope this information is useful.