Chinese characters not shown on file names in Windows 8.

Similar Questions

• Type a file name in windows Explorer emphasizes not the file

  Hey,.

  I have a wired problem, when I type the first letters (one or more) of the file name in windows Explorer, that is not

  highlights the corresponding file.

  (if I have a file named help.txt and I press 'h' on the keyboard, nothing happens)

  * I tried to manually select a different file before that type a letter and it did not work either.

  Thank you!

  
  

  
  

  Hi Magniy,

  1. How are you manually highlighting the file in Windows Explorer?

  2 when was the last time it was working fine?

  I suggest that you first of all, highlight the first file in Windows Explorer and try again later to highlight the file you want to check if it works.

  When you do it manually, make sure you highlight of the Windows Explorer window and then check if it works.

  If the previous step fails, to consult with another keyboard if the problem persists.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• Whenever Adobe reader tries to update it is said that the documents is not a valid file name and he ceases to make the update

  Original title: update problems, installation, uninstall, even adobe reader...

  Whenever trying to update my adobe reader it says that documents is not a valid file name and he continues to do the update and says update failed. I can not uninstall. What is happening and how to fix it?

  Hi SMHaney,

  1. What is the full error message you get?

  You can read the following article and try the steps and check:

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  You can also check out the following link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-1325-documents-is-not-a-valid-short-file/2d9db4a9-25F3-4563-BDDA-ef71e31f7573

  Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  You can also try to create a new user account and check.

  Create a user account

  Hope this information is useful.

• Does anyone know if Microsoft intends to increase the limit of 256 characters on the path/file names?

  It seems Im bumping up against the limit of 256 characters for path names / quite frequently these days. The increase of 8 + 3 characters for the file names, to the era of MS-DOS, to 256 characters/path of the file names is a wonderful thing when it was first implemented. But 256 limit character on the file + path names seems now quite inadequate. I'd even dare to suggest that increasing the limit above 256 would be more than just a nice update, but a required progress to catalogue the catalogue in full expansion of the knowledge we have today. Anyone know if Microsoft intends to increase this limit of 256 characters on the path + filename anytime in the near future?

  My recommendation is to increase the limit to a maximum of 256 characters to 4096 characters for the path + filename. This should be sufficiently comfortable for a few years anyway.

  System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  This already done with versions Unicode Windows API functions. When tools using the Ansi Version (to make it compatible with Win9x) the path is limited to 256 characters. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• The files 'disappear' when you add a period to a folder or a file name in windows through GUI

  The files 'disappear' when you add a period to a folder or a file name in windows through GUI

  I don't know if it's a bug, but certainly doesn't seem like it should be the case. I tried on both 64-bit and 32-bit on windows 7. Does not make this error on XP or vista.

  Can someone explain to me what is happening?

  To reproduce, in windows 7 make a file or folder, and THEN add a ".". (period) to the end of the name of the file and look at the file "disappear". It's still there, just need to refresh (F5) and it reappears (w/o of the annex "." because it's an illegal file naming convention).

  I tried to do the same thing but through command line and it always auto corrects names of files to the conventions, and correctly, it remains on the GUI, so I think that the problem is related to the graphical mode of name change

  -Favre a. Reid

  Hello

  This seems to be a bug with Windows 7. We really thank you for this bug in our opinion. This will be the team of developers. Thanking you once again.

  Concerning
  Anthony.

• Word 2011 will not open docx file created under Windows

  Word 2011 will not open docx file created under Windows sent me by mail after I installed El captain.

  No problem when I create a new file and re-open it. Can anyone help?

  I don't know that someone on the Microsoft forums can give you some useful tips.

• can not find script file "c:\". WINDOWS 32\system\system32.db»

  can not find script file "c:\". WINDOWS 32\system\system32.db»

  Hi bushra2000,

  Provide us more information on the issue:

  · You receive this error during the startup process?

  · You receive this error message when you work with an application or a program?

  · You have security software installed on your computer?

  · What is the service pack installed?

  Virus scanner to check that there is no virus or malware on your computer activity. You can check the link for the following online antivirus scan: http://onecare.live.com/site/en-us/default.htm

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Error message: can not find script file "c:\". WINDOWS 32\system\windows.db»

  Original title: error message: can not find script file "c:\". WINDOWS 32\system\windows.db» Help!

  After starting my Vista laptop, I get the error message: can not find script file "c:\". WINDOWS 32\system\windows.db» The mouse cursor freezes and I can't do anything on the PC. The PC will run in Safe Mode help!

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error 1325: [filename] is not a short file name valid when tried to install AutoCad

  Original title: Microsoft is not a valid short file name

  Hi, my name is Kenya Caldwell and I tried to install a program called Autocad, whenever I try to install the program, I get a message that says that Microsoft is not a valid short file name.  I received a response from Autocad, but I don't understand or know if they are correct, could someone help me?  The message from Autodesk is down below.

  Error 1325: [filename] is not a valid short file name

  Question

  The installation fails and the following error message:

  Error 1325: is not a valid short file name.

  Solution

  This error indicates that Microsoft® Windows® install fails to write to the target folder. The following troubleshooting suggestions may resolve the issue:

  • Check the permissions on the target installation location.
  • Check that the target location.
  • Check and remove the spaces or special characters in the installation path target. (Note: this suggestion does not apply to products based on AutoCAD® 2004 and more.)
  • If it is a deployment, make sure the target path is properly formatted (UNC) and defined in theappsetup.inf file, which is located in the folderimage .
  • If the target location is one drive other than the system drive, try to change the target in a directory on the drive system (usually the drive C).
  • Try to re-create the deployment.

  Kenya Caldwell

  Salute to the Kenya,

  Try these steps and check the result.
  Step 1: Check and delete the program AutoCAD
  see How to change or remove a program in Windows XP .
  b. Once you find the program AutoCAD in the list, select it and remove it.
  c. restart the computer.

  Step 2: Install the program by following these steps:
  a. connect you as an administrator, click Start, click my computer.
  b. open the C drive, open the Program Files folder.
  c. right-click in the empty space and click on new folder, call it as AutoCAD program.
  d. open the AutoCAD installation file and start the installation.
  e. find the C:\Program Files\AutoCAD program installation location, and then click ok.
  f. check if installation continues and completes successfully.

  For Windows Installer errors, see How to troubleshoot issues that may occur when you install a program

  For further assistance, please post your request to AutoCAD Discussion groups.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Script to remove the first few characters of a PDF file name?

  I know it should be easy, but I'm not a coder and don't have many opportunities to write scripts.  I hope it's like a second request two anyone out there.  All I want to do is point a script in a PDF file that will review the file name, cut the first two characters of the file name and save the original file again.  I need to do this about 400 PDF documents on a recurring basis, hence the need for a script.  Thus, for example, if I have a C:/temp/myFile.pdf file, I would the script to rename the file to just "file.pdf".

  Any help would be greatly appreciated.

  JBF

  Use this code in your action (note that this will not work if your file name)

  contains the comma):

  var filePath = this.path.replace(this.documentFileName,"");

  var NouveauNomFichier = this.documentFileName.substring (2);

  this.saveAs (filePath + newFileName);

• How does NOT save a file name extension?

  Hey everybody!

  I have a script for Photoshop > > extension a bit > > I click on a button and the script save the .jpg file into a png (with extra stuff "of course") file in the same folder.

  Works like a charm...

  But when it comes to the original file name: exemple.jpg

  I get this png file name: example.jpg.png

  I save the file name and path with this code:

  filePath = app.activeDocument.path + '/' + app.activeDocument.name; + '.png';
  

  The goal is to get rid of the section '.jpg' the new file name.

  I tried to save file name in a variable and then reduce the number of characters or even save it without the extension, but no luck.

  any ideas? !

  Thank you!

  var name = app.activeDocument.name;
  If (Name.indexOf(".")! = - 1) Name = Name.substr (0, Name.lastIndexOf("."));
  filePath = app.activeDocument.path + "/" + Name + ".png";

• How I save action to save as that does not include a file name?

  HI -.

  I have an Action that will be cropping and scaling a PDF file then save it as a JPG in a destination folder.  The problem is that when I recorded the Action I did with a file named ABC. PDF and saved as ABC. JPG - and now all files saved with this

  Action is called ABC. JPG

  It is therefore impossible to use with a bunch of different files.  A file gets overwritten several times with the same name.  The ABC's of file name. JPG is 'burned' in Action.

  -How to record an action to save money without including a file name?

  Your help on this crazy problem TIA-

  Josh

  CS5 on Windows7

  Have you looked at file > Scripts > Image Processor?

  This could be all you need to batch convert a folder of files to JPEG.

  Nancy O.

• Incompatibility of mushup. On timeline files are not the correct file names. Assistance requested...

  I don't know how it happened, but I have a strange situation where a video published on the timeline shows his name as... 7894.avi but it's actually 7892.avi if you right click and select 'Properties' or look in Windows Explorer.

  The film is mjpeg, 1280 x 720 30 p. The problem is that I am using (or trying to use) an EDL exported from this chronology to import the corresponding change in the other channel of a stereo pair. I used this method in the past on projects 3D in PPro CS4 on the same machine and OS (win7) without any problem.

  Clip numbering is tweaked throughout the entire timeline and therefore any EDL is frame for chassis length, but with the wrong film.

  This rings a Bell for anyone? Any ideas on how to force a change in file name?

  TIA,

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  (< *) # > <

  Any ideas on how to force a change in file name?

  Select the item in the project Panel, right-click and select "replace the film...". »

  You will then have a box that gives you the ability to "Rename the video file name".

  This method will also rename the items already in your editing.

• Cannot delete files with long file names in Windows 7

  Unnecessary Windows 7 will not erase a file whose name is too long. I have no name, it is in a temporary folder of IE. I can't get rid of it as options to rename will not be visible.

  Thanks, but I have solved the problem. The error message was about 'file path or destination file name is too long. It is the backup to the temporary internet file that was causing a problem: he made the PATH too long as she added additional elements on the path. That was simply solved by the path to 2 bits, (path upper and lower file path) to cut and remove separately.

  When I tried to delete the .jpg image with the extremely long filename at the end of the long path he says as the destination folder (ie the TRASH) could not hold the file due to excessive length. It's confusing to say the least.

  Anyway that little trash has bit the dust.

• Why are they not icons and files in the windows folder

  No matter what folder/window that opens like the Control Panel, documents folder opens but is a blank window.  No icons or files.  Programs and files are all there, but could not get to them from any window.  Why windows appear white?

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.