Chips debugging in general - help me understand

Similar Questions

• Need help to understand the network of vSphere environment

  Hello

  I need your help in understanding the network environment in vSphere. Please see the diagram and the text below:

  

  NIC #1 - Management Port (access from client vsphere, vCenter server)

  NIC #2 - Port of VMkernal (for iSCSI, vMotion, etc.)

  NIC #3 -?

  #4 – CARTE NETWORK INTERFACE?

  Q1 how allow external users to access services over the ESX host? (for example, IIS, FTP, Exchange, NFS)

  Q2, what will be the role of the other two network cards? Is it connected to the physical switch?

  * Ask you all to please help me by sharing your knowledge / experience on the network portion, you have made in your environment as NIC how, what to do with that. *

  I really need to understand the networking of concepts in vSphere, hope that your help!

  
  

  Best regards: Yash

  With an additional NIC with 2 port a general configuration might look like this:

  vSwitch0 - vmnic0, vmnic1 (connected to different physical switches)

  Network VMkernel management

  VMotion VMkernel network (own IP network, own VLAN)

  Better if they is configured as active / standby.

  vSwitch1 - vmnic2, vmnic3 (connected to different physical switches)

  Trade VM

  vSwitch2 - vmnic4, vmnic5 (connected to different physical switches)

  VMkernel iSCSI (own IP network, own VLAN)

  Ideal if it is added to the component Multipath iSCSI, which is quite easy to vSphere 5.

• Help to understand a warning in disk utility

  Hi - I run regularly "verify disk permissions" because it was recommended to me.  Today I came with a message that I've never seen before, and I hope someone can help me understand what it means and if I need to do something.  It reads:

  WARNING: SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" file has been modified and will not be repaired.

  I know that my company (they have put in place and the laptop power) started using remote access to address issues of service to their end; I don't know if it's relevant (I'm not educated on computers, my apologies in advance for that).

  This particular message can be ignored.

• I try to get an update of the software update, but he kept saying ' this phone (Iphone 5 s) is not onger connected to the internet while I am using internet.» Please help me understand why.

  I'm trying to get a software update IOS 9.3 as reminded me. He repeated that "impossible because you are no longer connected to the internet while I am on the internet. Please help me understand why. I did it many times, but it's really annoying

  The iOS 9.3 update was pulled for iPhone 5s and older iPhones because of activation problems. He will be unavailable for the next few days.

• Please help me understand how to install updates with the following error updated Message__The following have not been installed: __Security update for Microsoft XP KB 2289162

  Please help me understand how to install updates with the following error Message

  The following updates were not installed:

  Security for Microsoft XP KB 2289162 update

  See the section "How to get help" of http://support.microsoft.com/kb/2289162

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Difficult problem upgrading Vista/Windows 7 for anyone who dares to try to help me to solve it. PLEASE HELP ME UNDERSTAND THIS!

  My computer is a few years old, but has always been a good thing. I have a Gateway P6831FX laptop. It came with Vista pre-installed, but also many devices hardware upgrade card high quality graphics, monitor, sound system, etc. because it was built for the high-quality games.  Unfortunately, my OS system crashed and the computer did not come with recovery discs (gateway said that I should order the discs on their part and that I had to pay for them. Which shocked me because when I bought the computer I paid for a license to the BONE so you would think they would send the recovery discs I free).  However, I recently bought a disc to upgrade to windows 7 because I was planning on upgrading my system before it crashed.  So with a computer, I couldn't use, I thought that I had nothing to lose and I decided to try to load my system windows 7 on the computer.  I put the disc in the drive and load windows 7 with no problems at all.  I don't know if I've checked all the right boxes when he asked all sorts of questions, but my big computer worked when I was tired.  I had to go online and download the driver for the webcam to webcam would work once again and I lost all programs preloaded but other than that everything seems to work fine.  But then all of a sudden the sound no longer works.  I turned off the computer and turn it back on and the sound was back on.  But a few hours later, the noise stopped working again and it keeps going.  It is when I reboot it, but it is becoming a chore.  I decided that I would try to fix it and I went into the Device Manager and I discovered something to worry about. All original equipment upgraded in the computer is no longer registered.  All that was there was listed as generic devices Microsoft and number of manufacturer information and model said: not available. The monitor, for example, is listed as 'No generic PnP Monitor'.  Everything updated, so that I paid extra watch now simply known as generic peripheral windows (with a date of installation date that I loaded windows 7).

  Is there anyway to retrieve the updated materials and programs without having to order and pay for the vista recovery discs?  If I have to, I'll have to erase windows 7 then reload vista with recovery disks and then reload again the upgrade to windows 7?  However, one thing that baffles me is that when I pull my hard drive it shows that I have 2 here.  It shows 1 Partition (C) and (D) recovery so I think that my original vista system with the hardware upgraded and programs is still in my computer somewhere in the recovery disc (D) but I can not understand how to access and I tried.  And if for some reason any I can never access or recover, I would like at least to remove it because it takes up a ton of space on my hard drive.  If anyone can understand what I'm trying to say here, that's where somehow you can help me understand cela stuff?  Thank you for your time.

  Hello

  Gateway put a recovery Partition on your hard disk to reinstall Vista from rather than providing records.

  It's the way it's done now and you are also supposed to make recovery disc from it, that you can not do until you reinstall Vista now.

  If the recovery Partition: D still works, we do not know as you have installation, etc. on this laptop.

  You need to try.

  Reinstall Vista > and then upgrade to Windows 7.

  .

  Here is the information on the bridge for learn you more about reinstalling Vista.

  Full factory for the gateway restore, which you will always be able to use...

  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml

  And once you reinstall Vista you go to the site of the bridge or from the hardware manufacturer (that you upgraded material initially) Support Web site > download drivers and software Section > equip your laptop model number or the hardware and operating system > and download the latest drivers for the notebook hardware.

  http://support.gateway.com/product/?cmpid=supportnav

  And also when Windows 7 is installed then you will need to go to this same site gateway or the hardware manufacturer (that you upgraded material initially) and download the latest Windows 7 drivers for it also.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the recovery partition is damaged ask gateway if they provide the disc of recovery for you.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

  p.s. That's what you should have done before you start the upgrade to Windows 7.

  Go to your laptop manufacturer's website and check if Windows 7 drivers are available for your make and model laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

• 0x0000000A (0x00000002, 0x00000001, 0 x 00000034, 0X81BA4E79) I hope someone could help me understand this...

  0x0000000A (0x00000002, 0x00000001, 0 x 00000034, 0X81BA4E79) I hope someone could help me understand this... I just left a few minutes just for a coffee when I came back, my screen like that... I try to look in the computer management it says in windows under the application inside the event journal side by side source description 33 ID and it says also in windows under system log is the name of the Journal: System Source: Tcpip Date: event ID: 4226 task category: no level: warning keywords: PC Description: TCP/IP has reached the security limit imposed on the number of simultaneous TCP connect attempts... now why they produce to my laptop what can I do to avoid this msg. Once again

  Thank you... keep it up and more power

  I think you have two problems:

  Try the "last known good configuration".

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff560129 (v = vs. 85) .aspx

  Using the last good known Configuration
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Do you have Service Pack 2? If you do not, upgrade to SP2

  See this:

  TCP/IP has reached the security limit imposed on the number of TCP simultaneous connect attempts on Windows Vista error
  http://www.mydigitallife.info/Tcpip-has-reached-the-security-limit-imposed-on-the-number-of-concurrent-TCP-connect-attempts-error-on-Windows-Vista/

  By default, the half-open TCP connections limit is disabled in Windows Server 2008 with Service Pack 2 (SP2) and in Windows Vista with Service Pack 2 (SP2).

  How to enable the half-open TCP connections limit in Windows Vista with Service Pack 2 and Windows Server 2008 with Service Pack 2
  http://support.Microsoft.com/kb/969710

• Help me understand the Vista backup

  I just started using Vista backup to backup my PC to an external hard drive.  There are several things I want to ask about the Vista Backup utility.

  1. with many other backup programs (by example, utility backup Windows XP), I was able to review what files were backed up, because the utility has a provision for the display of files saved in their original folder structure.  This is useful for manual checking that a group of files have been backed up.

  With Vista backup, there is no provision.  The backup is stored in a number of ZIP files, with no apparent match to the source folder structure.

  Is there another way to view files saved in their original Vista backup folder structure?

  2. I recently did a second backup of my hard drive Vista.  I have added almost all the files.  In fact, most of the changes have been moving and renaming of audio files.  Yet, the second backup is larger than the first, each approximately 20 GB.  And it took a long time, like the first.  Ultimately, the TWO backups were kept in separate folders dated.

  My questions:
  a. Why is the second big backup?  Can I apply an incremental, or differential backup as it existed under XP?  If you tell me that it's already a differential backup, then why is it so important and take so long?

  b. I must keep each date of the backup folder?  If so, my external hard drive is quickly running out of room!  But if I remove it, maybe I'll lose data!  Please help me understand how Vista backups are cataloged.

  Thank you.

  My questions:
  a. Why is the second big backup?  Can I apply an incremental, or differential backup as it existed under XP?  If you tell me that it's already a differential backup, then why is it so important and take so long?

  b. I must keep each date of the backup folder?  If so, my external hard drive is quickly running out of room!  But if I remove it, maybe I'll lose data!  Please help me understand how Vista backups are cataloged.

  The second backup is great because because you moved your files autour and so backup if they were different files. Vista backup only new or modified files after the first backup.

  If you open the file, you will be able to access all the saved files and delete those you don't need.

• Need help to understand CodeModuleListener.

  Hi all

  I need your help to understand CodeModuleListener.

  I need to implement CodeModuleListener in my application, but I am confused between docs provided with the 5.0 SDK and documentation online.

  Please look at the below link and image

  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/system/CodeModuleListener.html...

  If you can not see image below please find docs on link: -.

  Search in Motion\BlackBerry JDE 5.0.0\docs\api\index.html (or attempt to open attachments)

  

  Please answer as soon as POSSIBLE.

  Found the root of the problem.

  When I was using jde 5.0 with eclipse (by creating an ee file) problem appears, but as I install it new eclipse with the plugin 5.0, problem solved.

• Need help to understand the query result

  Hi gurus

  I was reading one of the question here in this forum and its link is below:

  Query required for scenario

  I had some confusion related to this code and don't understand the logic of the out put, see query below:

  Query

  with sub_services as

  (

  Select su_seq 12323, 'HLR1' so_id, 1 seq Union double all the

  Select su_seq 12323, "HLR2' so_id, seq 2 Union double all the

  Select su_seq 12323, "A09" so_id, seq 3 of all the double union

  Select su_seq 12333, "MO1" so_id, seq 4 Union double all the

  Select su_seq 12333, "MO2' so_id, seq 5 Union double all the

  Select su_seq 12333, "A09" so_id, 6 seq in union double all the

  Select su_seq 12333, 'M0CR' so_id, seq 7 Union double all the

  Select su_seq 12999, "LOL1' so_id, seq 8 Union double all the

  Select su_seq 12999, "LOL2' so_id, seq 9 double

  )

  Select *.

  of sub_services b

  where exists (select 1 from sub_services

  where su_seq = b.su_seq

  and so_id = 'A09.

  )

  order by 2;

  The query result

  12323 A09 3

  12333 6 A09

  12323 HLR1 1

  12323 HLR2 2

  12333 M0CR 7

  12333 4 MO1

  12333 5 MO2

  According to my understanding, the above query should return records in red only because of her is below command

  It exists (select 1 from sub_services

  where su_seq = b.su_seq

  and so_id = 'A09.

  but don't know why he's back 7 files, can someone help me understand the result...

  It is query is functionally identical to the PL/SQL block, but much more effective.

  declare

  number of l_res;

  Start

  for line (select *)

  sub_services) loop

  Start

  Select 1 from l_res

  of sub_services

  where su_seq = row.su_seq and

  so_id = "A09" and

  rownum = 1;

  exception when

  NO_DATA_FOUND then

  null;

  end;

  end loop;

  end;

  Essentially every row in the outer query are tested against him exists query.  Given the correlation between two requests is based only on su_seq each line with a su_seq value returned by him is returned in the output.

  Another way to think he uses instead a join condition.  This query is equivalent to the query to exist

  Select the main

  of main sub_services

  Join select (separate su_seq

  of sub_services

  where so_id = "A09") cond

  We main.su_seq = cond.su_seq;

  John

• Need help with understanding PowerCli scripting by LucD

  Hello

  I'll give you the standard statement that I am a noob powercli and don't really know what I'm doing here.  Here's a script that works because it runs without error and gives a report but I need help to understand this under his weight.

  Connect-VIServer '< our vcenter >' - user < user > admin-password < admin-user-pwd >

  $allvms = @)

  $vms = get - Vm | where {$_.} PowerState - eq "Receptor"}

  $start = (get-Date). AddDays(-1)

  $metrics = "mem.usage.average".

  $stats = get-Stat-entity $vms - start $start - Stat $metrics

  $stats | Group-object - property {$_.} Timestamp.Day}, {$_.} @entity.name} | %{

  $vmstat = "" | Select the day, MemAlloc, MemMin, MemMax, MemAvg, VmName

  $vmstat. VmName = $_. Values [1]

  $vmstat. Day = $_. Group [0]. Timestamp.Date

  $mem = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Measure-object-property value - average - Maximum - Minimum

  $vmstat. MemMax = [int] $mem. Maximum ##dfsdf

  $vmstat. MemAvg = [int] $mem. Average

  $vmstat. MemMin = [int] $mem. Minimum

  $vmstat. MemAlloc = $_. Group [0]. Entity.MemoryMB

  $allvms += $vmstat

  }

  $allvms |

  Export-Csv "c:\ < folder > \ <>.csv file Destination"-noTypeInformation

  It connects to our server vcenter server and offers two days of data.  Today and yesterday, all with a timestamp of 0:00.  See below for an example of a virtual machine.

  VmName	Day	MemAlloc	MemMax	MemAvg	MemMin
  < name VM1 >	07/05/2016 0:00	4096	18	18	18
  < name VM1 >	06/05/2016 0:00	4096	36	12	8

  The MemMax, the MemAvg and the MemMin are for this day?  Just the max of this period of sampling time 0:00?

  What I'm looking for, it is to find that the use of the maximum memory of virtual machines are for the whole day.  So I hope that I can remove memory of VMs that do not use it.  I was listed on the change $start = (Get-Date). The value of AddDays(-1) to $start = (Get-Date). AddDays(-30) and see what things alike.  I want to be sure however that the value for MemMax is the highest value for a period of 24 hours.  That is to say for the 07/05/2016 the given virtual machine never used a maximum of 18% of his memory attributed the 06/05/2016 the maximum amount of memory used was 36%, and so on that I extend on the date range.

  Kind regards

  Michael

  It then becomes a rather simple Get-Stat script.

  $vms = get - Vm | where {$_.} PowerState - eq "Receptor"}

  $start = (get-Date). AddDays(-1)

  $metrics = "mem.usage.average".

  Get-Stat - entity $vms - start $start - Stat $metrics |

  Select Timestamp,@{N='VM'; E={$_. @entity.name}}, Value |

  Tri-objet-VM property |

  Export-Csv "c:\------.csv '-noTypeInformation

• I lost some of the folders in the library.  They exist in the Explorer solutions, but somehow got removed from the library.  I can bring them back in but I'm afraid it will happen again in LR.  Please help me understand what happened and how can I prevent

  I lost some of the folders in the library.  They exist in the Explorer solutions, but somehow got removed from the library.  I can bring them back in but I'm afraid it will happen again in LR.  Please help me understand what happened and how can I prevent the recurrence. I use Win7.

  A few possibilities:

  1 > you click with the right button on the files and chose to remove them from Lightroom.

  2 > you have created a new catalog, and records that are not part of another catalog.

  Each of these scenarios seem like they could be a possibility?

• Can anyone refer me to a 5 LIGHTROOM Expert who can access my computer and help me understand my problem?  Am happy to pay... just need to find someone who can help me.  Thank you!

  Can anyone refer me to a LIGHTROOM 5 Expert who can access my computer and help me understand my problem? Am happy to pay, just need help... Thank you!  Tammy

  You are welcome.

  It was solved by removing the Previews.lrdata folder as previews had been corrupted!

• I have a problem with my shrink to a smaller size text, when I create a link. Can someone help me understand how to solve this problem?

  I have a problem with my shrink to a smaller size text, when I create a link. Can someone help me understand how to solve this problem? Here is the URL of the page where it happens. Spring Art tour

  Tamlyn

  Line 22 of your main document

  do-size: 14px;

  change that to

  font size: 1 rem;

  See https://css-tricks.com/confused-rem-em/

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html