CHKDSK runs automatically at startup to the top

Similar Questions

• Windows 7 running slow at startup to the top

  I had problems with Win 7 Starter & slugglishly running in general in recent weeks. I did a clean installation a few months ago & everything was OK but now I notice a lag in just about everything, even small things such as opening a new tab in IE seem to cause a delay that did not previously exist.

  IM compares to my machine Win7 I use at work that runs a lot faster (C2D 2.8 ghz, 2 GB ram) which is in contrast to my home pc which is a quad core with 2 GB & a lot less open applications (I'm at work now with MANY open apps & still run faster than my PC with no apps open all the House!)

  Time opening IE8 reboot & loading the homepage is apprx 3.5 minutes (slower even than my old Vista laptop). Ive done all the cleaning I can use C Cleaner, emptied the trash, removed rarely used applications etc.. Everything which is still connected is my printer, the KB & mouse, also ran MSConfig & make all the necessary changes so that he can run faster, but none of this has made ALL the difference - outside to do a fresh install of W7 I don't know what I can do.

  Also tried starting in Firefox or Chrome instead of IE8 but its still just as slow (is also used with compensation history of IE8, cookies, etc.). Even things like Win explore & Control Panel are slow at any time, as is the search engine that is supposed to be indexed but still chuggs along for more than a few seconds (once again my work PC is very fast in this regard with a lot more files potentially be examined). Office 2010 also takes about 20-30 seconds to open Word or Excel, once again my work PC starts immediately...

  Another aspect of stress that has never caused problems in the past, my main drive (160 GB) is partitioned into 2 sections (50 / 50 split apprx)-many spare parts on the 'C' drive and even again on the data section. I also have a secondary internal HDD 320 for data only, both drives are 7200 RPM - is there something here that is causing a problem with Win7 that never affected XP?

  HARD drives are all defragged using Diskeeper in game & forget mode - all showing healthy

  Can someone suggest a remedy for my sick PC?

  Hello

  Norton is known to cause slow downs and other issues. Uninstall and then running
  the Norton Removal Tool to stop the remains (even those will interrupt the strange) to load.
  Use the recommendations below when testing, even better would be permanently.

  Norton Removal Tool
  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  =================================

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My computer is very slow and I was told that I should clear up until my departure and eliminate the number of programs that run at startup to the top.

  My real problem is to know how to clean the programs that are run at startup to the top. In addition, any other suggestions on how to improve the speed of my computer.

  Manage your startup:

  Open your Start menu-> click on run-> in the command screen type "msconfig.exe"-> in the "system configuration utility", click on a 'service' or 'Startup' tab-> uncheck all the programs you are no longer help.

  The fragmentation

  1. Right-click the C drive.
  1. Click on properties.
  1. Click on the Tools tab.
  1. Click "defragment now".
  1. Click on defragment.

  You can search what process you use cpu and the end of the process.

  Under steps:

  1. right click on the taskbar.

  2. click on the Task Manager.

  3. click on the processes tab.

  4. double-click on the CPU.

  5 is if "system idle process" is max.

  6. If it is not a right click and click on end process.

  Learn "why is my computer running so slow?" and "how to speed it UP:

  http://downloadlk.com/WhyIsMyComputerSlow.htm

  Use the tool: http://downloadlk.com/themosteffectiveregistrycleaner.htm

• The app ever to run automatically at startup

  Hi all

  I searched the forums and tried all the code to make my app run automatically at startup. Unfortunately, when I tested my code on the real device. The application never runs automatically when the departure of the unit (I tested by remove the battery and put it again).

  Please see my code below, I created 2 projects to test the operation. But they do not work.

  1 loop until app not at startup

  public class AutoStartTest extends UiApplication {
      public static void main(String[] args) {
          new AutoStartTest().enterEventDispatcher(); // GUI
      }
  
      AutoStartTest() {
          try {
              // check if still in startup
              ApplicationManager app = ApplicationManager.getApplicationManager();
              boolean keepGoing = true;
              while (keepGoing) {
                  if (app.inStartup()) {
                      Thread.sleep(1000);
                  } else {
                      keepGoing = false;
                  }
              }
  
              // Push a new GUI screen.
              DummyScreen screen = new DummyScreen();
              pushScreen(screen);
          } catch (Exception e) {
              e.printStackTrace();
          }
      }
  
      // Simple GUI screen from which to create an Invocation.
      final class DummyScreen extends MainScreen {
          DummyScreen() {
              setTitle(new LabelField("Autostart test 2", Field.FIELD_HCENTER));
          }
      }
  

  2. use the listener of system

  public class AutoStartTest extends UiApplication implements SystemListener {
  
      public static void main(String[] args) {
  
          AutoStartTest appInstance = new AutoStartTest();
  
          // If system startup is still in progress when this
          // application is run.
          if (ApplicationManager.getApplicationManager().inStartup()) {
              appInstance.addSystemListener(appInstance);
          } else {
              appInstance.doStartupWorkLater();
          }
          appInstance.enterEventDispatcher();
      }
  
      // constructs
      AutoStartTest() {
  
      }
  
      private void doStartupWorkLater() {
  
          invokeLater(new Runnable() {
              public void run() {
                  doStartupWork();
              }
          });
      }
  
      private void doStartupWork() {
          // Push a new GUI screen.
          DummyScreen screen = new DummyScreen();
          pushScreen(screen);
      }
  
      //
      // SystemListener
      //
  
      /** @see SystemListener#powerUp() */
      public void powerUp() {
          removeSystemListener(this);
          doStartupWorkLater();
      }
  
      final class DummyScreen extends MainScreen {
          DummyScreen() {
              setTitle(new LabelField("Autorstarttest 3 ", Field.FIELD_HCENTER));
  
          }
      }
  

  It's the setting in

  I also joined the project as an attachment. But in the project, I tried to create a thread to send http get and open a session on the server side. But it seemed that the app has not started too.

  Visit this link
  http://StackOverflow.com/questions/11321653/BlackBerry-global-popup

• CHKDSK runs automatically and checks my 2nd HARD drive and shows a lot of mistakes, 2nd HARD drive is gone.

  Hi, I have 2 80 GB HDD (SATA - 1 + 2 - ATA). whenever I turn on my system (XP SP3) then chkdsk runs automatically
  and checks my 2nd HARD drive and shows many errors like "replacement Windows a bad cluster in file:...". "like that.
  and it takes a lot of time around 3 to 4 hours. He then shows the windows xp desktop,
  but the problem is MY SECOND HARD drive IS NOT SHOWN in EXPLORER, IT IS GONE.
  Can someone help me, I have my imp data on my 2nd HARD drive.
  How do I return there without losing any data or file?

  Hello

  1. don't you make changes on the computer before this problem?
  2 - is an internal hard drive?

  Step 1: Check if hard driver is getting detected in Device Manager and send back the same.

  Reference:
  By using Device Manager
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_dev_mgr.mspx?mfr=true

  Step 2: Check if this disc is getting detected in disk management.

  If the hard drive is getting detected in disk management and there is no drive letter assigned, and assign a drive letter and check.

  Reference:
  How to change drive letter assignments in Windows XP
  http://support.Microsoft.com/kb/307844

  Step 3: To disable chkdsk at startup, follow these steps:

  a. Click Start, run and type regedit.
  b.Navigate to the following subkey:

  HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Control\Session Manager

  c. change the BootExecute entry: autocheck autochk *.
  d. exit your registry database.
  e. restart.

  Registry warning:
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

• How to stop programs that run automatically at startup?

  Hi I just wanted to know how to stop programs from running automatically at startup, I already ran msconfig and disabled programs that I don't want to run at startup and it always automatically start also on msconfig, it indicates the applications that I don't want to run at startup is disabled and it always runs at startup. The programs that I don't want to run at startup are tom tom home and bbc iplayer desktop, but he always runs at startup.

  One other thing is when I install new programs, that they automatically run at startup without my permission.

  Palcouk did preferred proposals. Another way to identify which loads when you start using Autoruns (freeware from Microsoft).
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  A useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• From virtual machine automatically at startup of the host

  Hello

  I'm trying to find how to start a virtual machine automatically at startup of the ESXi host.  I think I did in ESX 3.5, but have so far been unable to find a similar feature in ESXi.

  Is this possible in ESXi?

  Thank you!

  I do not use ESXi, but if you go to the Configuration of your ESXi host and then virtual Mahcine start/stop tab is a box of properties in the right corner?  If so, like ESX, this is where to put it

• How to disable Yahoo and Windows Live to automatically run at startup to the top

  How to disable yahoo and windows live programs for not runing automatically at the turn on computer?

  * original title - how to disable yahoo and windows live programs for not runing automatically at the turn on computer? *

  Hello

  http://www.tech-recipes.com/Rx/2443/windows_live_messenger_prevent_starting_when_windows_starts/

  Windows Live Messenger: Prevent from starting when Windows starts

  1. open Windows Live Messenger and sign in.

  2. next to your name at the top, click on the arrow pointing down

  3. Select Options

  4. Select general in the left pane of the Options window.

  5. under Sign In, clear the check box automatically run Windows Live Messenger when I log in Windows .

  6. click on OK.

  http://answers.Yahoo.com/question/index?QID=1006022313620

  How can I stop Yahoo Messenger to load at startup?

  When you're connected go to messenger in the top menu bar, then Preferences and then to the general and uncheck the box for automatically start yahoo messenger when I start my computer and then apply ok your way out

• Stop programs from running automatically at startup in Vista

  Hello

  I need to stop a bunch of programs to run automatically when my computer starts. I have about four programs that I need not run unless I open them myself. Their icons are listed in my lower right. A technician told me to stop running and it would be useful to my computer work better. I don't see this option in the Manager of tasks under Vista. Is this another place where I can manage which starts and runs and this isn't?

  Thanks much for any help!

  ~ April

  Individual programs have preferences that you can access and prevents them from running on startup?  If you right-click on the icons in the Notification area are there similar options available?

  Otherwise you can disable them to load at startup via the tool MsConfig and his ' tab Statup.

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310560&FR=1&PA=1&SD=HSCH

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

• How can I configure things if a program runs automatically at startup?

  I have a video surveillance program, I would have run automatically using my UID, not root login, when starting my Mini (its running OS X 10.11).  What is the best way to do it?

  Configure a user account for doing this, set this auto connect user account & also to set the application to open a connection point. System Preferences > users and groups is where you manage all that Setup.

  If you need a 'device' you should probably look at running Linux or something that is not as heavy user in OS X: this is very dependent on user names to run applications. You will need to configure the lock screen to restrict access to these user data to anyone with physical access, be aware that this configuration is not ideal for security. Someone could just restart and access the data before the screen saver locks the screen, you could start via a login script, but it is perhaps too easy to defeat too.

• HP Vision 2000: "enter the password administrator or power on password' pop up immediately at startup to the top

  I get 'administrator or power on password password' jump to the top of the screen immediately on startup, the password is lost, and when I'm entered in what I thought the password could be 3 times I had this code - 54667991

  Help, please

  Steps to follow:
  1. use the posted above unlock code to access the BIOS
  2 disable all passwords that are enabled
  3. If the request for current password - enter the unlock code
  4. for the new password, simply press the ENTER key
  5. repeat the same thing to check the password column.
  6. then exit the BIOS saving & output option to save the changes.
  
  Troubleshooting:
  Incase if the password does not work please try a Hard Reset as follows.
  
  1. power off the laptop
  
  2 disconnect the power adapter and remove the battery
  
  3 hold the Power button for 30 seconds
  
  4. connect the power supply/AC adapter (leave the battery at the moment) and start Notepad
  
  5. If now see you a password, please enter the same password I've shared before and press on enter
  
  Hope this helps, for other queries in response to the post and feel free to join us again
  
  * Click on 'white Thumbs Up' on the left to say thank you *.
  
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Windows Live Messenger - remove the desktop icon and prevent them from running automatically at startup

  original title: Windows Live Messenger!

  Windows Live Messenger fills every time computer screen is turned on with an icon on the right lower bar of the screen of the task.  How do you keep what automatically appear on start up and how to remove the icon from the taskbar

  TKS

  In the options of windows live, go to the sign in tab, and clear the check mark "automatically run windows live messenger when I connect windows", as shown below.

  

• I'm running mse how to stop a program at startup to the top

  How do I change start programs when running microsoft security essentials,

  Use windows defender, but understand that this is blocked during execution of mse.

  also my pc is very slow the beginning upward since installing mse, is this normal?

  How do I change start programs when running microsoft security essentials,

  Use windows defender, but understand that this is blocked during execution of mse.

  also my pc is very slow the beginning upward since installing mse, is this normal?

  The quickest way to disable a startup program, in addition to the use of Windows Defender...

  Start button > in the search box, type msconfig > press > start up tab > here is the list of startup programs.

  To disable, uncheck the box in front.

  To activate... check the box opposite.

  Be careful, make sure you know for sure the program that you turn off will NOT affect the performance of the system.

• How can I stop Firefox open automatically at startup since the last update on the Macintosh under Tiger?

  Firefox will automatically launch at startup every time. I don't want it. If I want, I'll click. I'm not on the internet every time I start my computer and do not have to wait FOR it to start so I can leave. I don't know why she does - never done before - and it's EXTREMELY annoying! Help! I'm on a Macintosh running with Tiger OS.

  It is a setting of Mac.

  1. Click accounts (in the line of the System Preferences window system)
  2. Click the login items tab
  3. Click on Firefox in the list of applications
  4. Click on the "-" symbol

• Windows Internet Explorer opens automatically at startup of the Facebook page

  I use Windows Vista Home Premium software on a Gateway computer. For some reason any start-up, my Windows Internet Explorer is automatically upwards, and there a Web Facebook.com page already on the screen asking you to sign up for Facebook. It flashes at the bottom of my screen until I click on it. I don't want no internet will automatically launch and I want either of Facebook. How can I keep internet start automatically without my even clicking on it? Thanks for the help.

  Dear Rachel,

  Please, try the following steps.

  (1) check that the homepage of your Internet Explorer is not "facebook.com" - could be found under Tools-> Internet Options-> general, in the section "Home Page." If you do not have "facebook.com" written there, replace it with another site that you want to load when you start your browser or with "subject: empty ' If you just want a blank window is displayed when you run your browser.

  (2) on your Start menu, choose programs-> startup programs list. If "Internet Explorer" is in the list, just simply delete.

  ((3) if (2)) does not help, try running 'msconfig' (choose Run from the Start Menu and just type "msconfig" in the window that appears), go to "Startup" and uncheck a box near point "Windows Internet Explorer".

  I hope this helps!