Choice of mini screen

Similar Questions

• Can I connect a non-apple for my mac mini screen

  How to connect a non-apple for my mac mini screen?

  1. see #2.

  2. it depends on what type of cable the monitor has and the Mac mini ports; It is not a difference between an Apple and a monitor no Apple for this purpose. A Mini DisplayPort adapter allows to connect an older display until a Thunderbolt port.

  (142062)

• My mail on the iPad Mini screen prevents timing and immediately goes back to the homepage

  Whenever I select mail mail page comes and then, almost immediately, return to the home screen

  on the mini

  Could be an application running that is causing a conflict with mail.

  Follow the instructions for the force to leave applications running here > force an app to close on your iPhone, iPad or iPod touch - Apple Support

  Then restart your iPad.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Then try to Mail.

• After 5 min screen goes black on Satellite M60 all in game WOW

  Hello

  for two weeks my Satellite M60 presents problems for the game WOW.
  After 5 min of the Nootbook screen dark past, or permanent display, and nothing will.

  Before a year I push my Ram from 1 up to 2 GB.
  Is there someone who can help you?

  Thank you very much

  Hello

  Sounds like a RAM or overheating problem.
  Maybe the modules to affect the internal temperature higher RAM and functionality.
  This can lead to problems while game.

  I think you should first check if cooling modules a free from dust and debris.
  Dust can be removed using a jet of compressed air.

  The next step should be an update of the display driver.
  Check if there is some more recent versions. If yes-> updated!

  Good luck

• mini screen iPad issue 2

  model of mini iPad 2 16 GB Wifi has horizontal lines on the screen. They disappear sometimes, but mostly it is a. iPad is very well supported and never let down. Running latest OS only been like this since yesterday. The lines move with the apps and are not permanent, but they are there most of the time.

  Press and hold home/sleep set button until you see the apple logo and then release.

• Choice of resolution screen laptop E430 with gen 3, 4000 graphics

  Can someone with a gen 3 based E430 (such as the i5, 3210 m) which has the graphics of the 4000 series, please tell me what choices of less than 1366 x 768 screen resolution you get under display properties while watching on the screen of the phone (ex: 1024 x 600)?

  Thank you

  George

  Hi reefgeorge,

  Œuvres for integrated (E130 Intel 4000) and Nvidia (E430 Nvidia GT630/Intel 4000) model:
  800 X 600 1024 X 768 1280 X 600 1280 X 720 1280 X 768 1360 X 768 1366 X 768

  Fred

• Mini webcam screen

  Hi all

  If your using the new Skype you might have seen, there is a small/mini screen corner, when your in a videochat. The screen wil appear when your going on the internet to do something else. Is it possible to close or hide the small screen from webcam?

  Already a big thanks for the help.

  http://community.Skype.com/T5/Windows-desktop-client/help-cant-get-rid-of-this-thing/m-p/3924682#M33...

• I want to use my old imac as a screen for my new macbook pro. Should what cable I use?

  My imac has a port mini screen but my macbook pro is not, however, it has a bolt of lightning and a HDMI port.

  What is the best way to connect them?

  update - the imac has a mini DVI port not a mini display port

• External display via mini display port resolution

  Hello

  I have an iMac 27 "late 2009 with a graphic of ATI Radeon HD 4670 256 MB and the latest Mac OS.

  I just bought a Samsung U28E850R to use as a second screen UHD and connected via the port mini screen iMac to display the port of the Samsung.

  The problem is that it is not possible to set a higher resolution than Full HD on the Samsung. But with regard to the iMac specification 2560 x 1440 should be possible.

  Does anyone know the solution for my problem? Thank you.

  Hello there, riedma.

  It seems that you are wanting to be able to choose from all available on your new display resolutions. The following Knowledge Base article offers strong information to achieve this:

  OS X El Capitan: set the resolution of your screen

  Screen resolution determines the size of the text and objects on your screen. By default, the resolution of your screen is set to display the text stronger and more detailed images. So it is best to use the default resolver, you can manually set the resolution to make the text and objects appear larger on your screen, or adjust it to make the text and objects appear smaller in order to have more space on your screen.

  Depending on how you set the resolution, some applications may not entirely correspond to the screen. Using a scale of resolution can affect performance.

  Define the main screen resolution

  1. Choose the Apple menu > System Preferences, click view, and then click display.

  2. Select chipped, then select one of the options of resolution nationally.

  Define a connected screen resolution

  If you have more than one display, additional resolution options are available.

  1. After that the display is connected, choose Apple menu > System Preferences, click view, and then click display.

  2. Press the Option key while you click chipped to see additional resolutions for the second screen. Then select a resolution option to scale to the second screen.

  If you changed your screen resolution and now there is no picture

  Connect multiple monitors to your Mac

  Set of accessibility options

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• T550 screen and processor

  Hi, I am looking to buy a T550. However, I am torn when it comes to the processor and the choice of the screen.

  I use my laptop for businesses, use several applications at the same time, which can be quite CPU intensive, but I'm not a graphic designer or anything. The i5-5200 would be enough or it is better past to 5300-i5 or i7?

  My eyesight isn't great as I have so I'm worried that high resolutions will make things too small astigmatism. I have also heard that PWM can be a problem, but I don't know if it's on all the options screen or just a red herring? I do not tend to sit down with clients and show them so ideally I wish the screen to be seen from different angles, so I thought the IPS but can this questions of cause to do the small things on the computer?

  Any advice would be very welcome.

  The DPI scaling is a bit less advanced on Windows 7 than Windows 8.1, especially for programs that are not aware of the DPI scaling. I think that since the Office is by Microsoft that he would support scaling properly in resolution.

  Lower resolution always works the same, of course.

• I just downloaded a new theme for xp on windows site and I changed the resolution and has become a black screen on my pc.

  I'm down and back up to close it, but can not see the screen to do anything it is like a curtain that I see a bit of color behind the layer

  If the screen resolution is set to a setting that your monitor is not supported, the screen can be empty.

  Try to boot mode safe (repeatedly press the F8 key as your computer starts up).  Safe mode will come with a screen resolution standard (but large) that support all monitors.  If you can then see your screen, change your resolution to something that is supported by your monitor.  If you make the wrong choice and your screen turns black, don't panic, just do not touch anything and wait about 30 seconds and will return to the screen.  Once you properly set your resolution, then reboot in normal mode.

  HTH,
  JW

• Z10 BlackBerry home screen

  all I want is my wallpaper on my home screen. When I press and hold an icon all I have a choice to is moved or deleted. If I move no matter what I have 4 icons remain on top?

  Lou22 wrote:

  all I want is my wallpaper on my home screen

  Settings > display > Wallpaper Set is the first choice on this screen.

• Full screen on the 2nd monitor

  Hello!

  I want to preview full screen on my second monitor / or third, but without losing my monitor edition (when the choice of full-screen, it seems rather than the monitor edition).

  But I want to: monitor 1: chronology, the Source monitor, mounting monitor etc / Monitor 2: Overview full screen.

  Is this possible?

  Thank you, all the best,.

  Roman

  Hi Romanh,

  Open your project and go to Preferences > playback and check these options.

  

  Thank you

  Ilyes Singh

• Assistance to the resolution of the screen

  Captivate v5.5

  I have a 19 '' screen.

  My screen resolution is 1280 x 1024.

  99% of my Captivate projects are the images full screen and records from the site to my business - a the track/trace/freight management application.

  In order to capture my company Web site and all of the following pages while avoiding the header menu from the ISP, that is Mozilla Firefox menu header etc and also avoid the taskbar at the bottom of the screen I put in place the registration area for my projects should be 1260 x 883.

  This works very well for me, but I wonder if a project of this size will cause problems to my students when they see this through the LMS society on their screens?

  Like a global with more than 63 000 employees organization it is going to be a wide range of monitors and screen resolutions.

  In view of my project was created to 1260 x 883 what min screen resolution should I inform my students they need to use in order to ensure that they can see my projects without scroll bars / problems?

  Really appreciate all / any help (simple language please) in this area in the field of the project size, screen resolution, the size of the screen etc totally baffles me.

  Noel

  Christmas salvation

  It is the ongoing problem that we face. How to type correctly what is needed and ensure a quality experience for our end users.

  Do you have something that tells you what your end-users have or what the common denominator for their screen resolution? If so, I would like to address that.

  As you probably know, the best possible result is to record in a size where end users will read it with the same dimensions. That's often guessing. Or maybe educated conjecture.

  If you save to a larger size, this means that when the user reads it, one of two things will happen (according to the selected output type and how you are allowing them to read).

  One thing that can happen is that the user can see the scroll bars that force them to scroll to see the hidden parts of the video. If this can be annoying, the fidelity of the video should be blank, as nothing is currently scaling.

  The other thing that can happen is that the user may see degraded quality that the video is scaled to fit their display space. The extent to which things are deteriorating is entirely dependent on the amount of scaling is underway. The difference between the available size of the saved size vs is what determines how much you sacrifice quality.

  Hope this helps... Rick

• Epic fail after updating 10.6.4

  VMware Fusion 3.1 with Windows 7 64-bit on MacBook Pro. After updating 10.6.4 VM crashed hard when VMware warned me that the OpenGL driver was no longer good. He conditioned over and over again the same error message. By clicking on 'OK' would simply put the error message up. I could not leave VMware and had to force quit. I could only access the VMware virtual machine after force - quit VMware and restart the computer.

  VMware gives this large error message:

  "A serious error has occurred within your computer's OpenGL graphics drivers.

  Accelerated 3D graphics support will be disabled until the next time that our virtual machine is running. If you're runningâ 3D mode application full screen, you may need to switch out of it using Alt + Tab or Ctrl Alt Delete. You can also get to suspend and then resume this virtual machine.

  Make sure that you have or use the latest drivers from the website of the manufacturer of your graphics card. If this problem persists, s contact VMware support. Details of this error was recorded to the log file of the virtual machine. »

  (1) there is no work around.  VMWare cannot correct the buggy drivers from Apple.  There is nothing wrong with merger.

  (2) your only choice (like mine) is to rebuild your machine with 10.6.3 or wait for Apple to fix 10.6.4.

  It is a widespread problem, and Fusion is one of the many much affected products.

  I'm debating on going back on 10.6.3 (which is on a days work), or hoping that Apple will fix it.  The best thing to do is to newspapers an official ticket and call apple (if you have applecare).  More they get, the sooner we will have a fix.  I just hope that we don't have to wait 10.6.5.