Choice of resolution screen laptop E430 with gen 3, 4000 graphics

Similar Questions

• Windows 7 screen resolution is not agree with me after I did a fresh install of Windows!

  So after doing a fresh install of Windows 7 Home Premium on my laptop two days ago, I have tried many unsuccessfully to try to resolve a problem of resolution resulting from the update. My resolution is automatically set to a resolution of 1024 x 768 very blurry and I cannot recover my original resolution. When I go to the next option and the last, on the resolution list, 1280 x 1024, the screen is completely distorted and stretched which is hard on the eyes and is certainly not the original resolution for my laptop before the update. It's like installing new Windows completely wiped out my original graphics drivers.

  I also noticed with update that my graphics driver and the driver were set at "NVIDIA Standard VGA Graphics Adapter" which I am absolutely positive is not what I was using before, that I don't have a video card installed, even if I use not this laptop for games and is no longer for the school and other work. I'm 99% sure that I have a card NVIDIA GeForce FX 5200 installed, that even though he is old, always worked well, but even in this case, I'm still not sure if it's the card I have, which could be the reason why I can't find the right drivers for it.

  For reference (I'm running in Mode safe):

  

  I tried to update this standard graphics driver, but he claims, there is no update. I run all my virus programs, I have all my updates installed Windows, and I used the boost driver to try to see if there is any other updates, but nothing has worked. I did a "sfc/scannow". I ran Microsoft FixIt, tried to look in the "list all Modes" under the control panel screen resolution and I currently can't 'uncheck' Modes 'hide' because it is all grayed out. Honestly, I think I have tried everything to solve this problem, but I think he came to where I think I need to ask someone who can find the exact video card I have in my computer so I can possible find the driver for it, and maybe that would solve the problem.

  For reference, I also have a laptop Toshiba Satellite P25-S507. Running Windows 7 Home Premium 32-bit. If any other type of information is necessary, I can give him, let me know how to get around to provide for you. I will continue to try to see what I can do but for the moment, help! D:

  You do not use / install "driver booster" or other programs of type 'FixMyPC '.

  You need to visit your computer makers portable, specific to your model support site and install all the available drivers (Chipset/graphics/lan, etc.)

• Inspiron M5030, screen resolution: screen of laptop

  Hi, I have an Inspiron M5030, in the resolution of the screen laptop PC screen is the only option available, however, in maps graphic (in Device Manager) seems ATI Mobility Radeon HD 4250, so I want to change the resolution of the screen at this last one, i had reason to believe someone installs the program monitor Mobile PC without my consent , so I'll appreciate all the help.

  Hi Abel_Valdivia,

  I wish to inform you that, in accordance with the resolution of the screen, it will reflect the name of the screen connected to the system. As you use a display on LCD screen, it will show Mbilé PC display and if you connect an external monitor, it should give you the name of the monitor.

  If you encounter a problem with the resolution of the screen, let me know.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Qosmio X 500-resolution screen Native of 3 types

  Type 1 as the X 505-Q896
  Display size
  18.4 widescreen "
  Display type *.
  FHD TruBrite® TFT LCD display
  Display resolution
  1920 x 1080, Supports 1080 p * content *, 16:9 format

  type2 such as X 505-Q882
  Display size
  18.4 widescreen "
  Display type *.
  HD + TFT LCD screen
  Display resolution
  Supports 720 p content, format 16:9, 1680 x 945 (HD +)

  Type3 such as X 505-Q875
  Display size
  18.4 widescreen "
  Display type *.
  FHD TruBrite® TFT LCD display
  Display resolution
  Supports 1080i content, format 16:9, 1920 x 1080

  Hey,.

  Hmm for me the specs looks very clear and type 1 and 3 has 1920 x 1080 resolution screen which is FHD (FullHD) and type 2A HD screen + with a screen resolution of 1680 x 945.

  I guess that you have found this information on the official website of Toshiba? If Yes, the specification is correct.

  Type 1 and 3 have the highest screen resolution and I would take one of these laptops because you can look in the resolution FHD. :)

  If you have any other questions, just after again!

• Laptop Toshiba with Windows 7 Home Prem OA: damaged HDD / Act. key / No boot DVD

  Hello world

  My Toshiba laptop (Satellite P855-S5200) broke down and Im forced to replace my hard drive. As this laptop came with a preinstalled window, I don't have any starting device to activate my Window 7 Home Premium 64-bit again.

  The sticker on the back of my laptop said: Window 7 Home Prem OA.

  (1) what it means? What is the difference between mine and a regular version of window 7 Home Premium?

  I researched and found "X 17-58997 ISO» (2) it work to activate my Window 7 Home Prem OA? My laptop says 'X 16-96072' (3) I want to say I find that version to work for my laptop? If Yes, where can I find it?

  If I want to switch to Window 7 Professional How can I do? Can I just buy a Window 7 Professional Windows and install it?

  Please help! Greatly appreciated!

  If Santanu suggestion is not viable because your PC is no longer under warranty then try the following (and Yes you touch will activate Windows that you install Windows 7 Home Premium).

  (1) download the Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  SHA1 hash: 6071B4553FCF0EA53D589A846B5AE76743DD68FC
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso
  SHA1 hash: 6C9058389C1E2E5122B7C933275F963EDF1C07B9

  (2) after downloading the correct .iso file install HashCalc and validate the SHA1 hash value
  is correct. If the download is not corrupted, the value HashCalc returns will be the value of SHA1 I posted.
  HashCalc: http://www.slavasoft.com/hashcalc/index.htm

  (3) then use ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During the grace period, you can install your device drivers,
  run Windows updates and solve other problems or issues.
  Once you are satisfied everything is working properly, and then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available.

  Make a small group (10 updates both maax) of updates at the same time
  reboot if prompted and install another small group of updates and so on.
  registration of .NET Framework updates for the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Choice of resolution Dell E630

  I've updated from an E6520 to an E6530, and I do not see the choice of the resolution of the screen that I used to have on the E6520. I used to have very granular choices and was was the best for my needs was 1440 x 900 (rather than the full resolution of 1920 x 1080. On the E6530, the choices are very limited to this list:

  1920 x 1080
  1280 x 1024
  1024 x 800
  800 x 600

  This does not match my needs (site of the eye). I can not change the size of the text because it messes up some websites, I create diagrams, presentations etc, they do not properly display the standard text appears.

  I downloaded the latest drivers NVIDIA and Intel with no luck.

  Any suggestions (other than the return of the E6530?)

  I discovered that you can enter the screen resolutions customized by using the Advanced Mode in the Graphics Options (Intel Graphics and Media Control Panel). I was able to enter at 1440 x 900 and will define the major resolutions to take full with this new view.

• Qosmio F10-121, while the splash screen gets scratched with big purple bands

  Hello!

  Suddenly, I had a problem with my Qosmio. Maybe someone could help me.
  When I turn on my computer, the Qosmio logo appears (its ok) and then the Windows logo. But that's the problem, my screen becomes striped with big purple bands. I can't do anything, it's completely unreadable... Windows cannot be loaded, the Qosmio PIF and restart.

  When I plug in an external display, it's the same thing.
  I tried to use the restore DVD, but for the moment, it doesn't change anything.
  I see 2 problems:
  -A video card problem (but Qosmio logo appears, and the restore DVD menus are normal
  -A big failure of HARD drive (when I plug the SD of the internal Qosmio on my other computer, it is very, very slow, and suddenly, HDD disappears)
  So, if you have any advice...

  Thanks a lot for your answers and do not look at the faults.
  Eric

  I bought my laptop 5 years ago and after a week, the motherboard has been replaced. But since then, it works like a dream. Never had any problems.
  As you can see that computers are devices of high technologies and every time something might be broken.
  I think that the laptop should be checked by a technician with experience for laptop

• Satellite M40 screen is compatible with Satellite L30-101?

  Hello
  I have a Toshiba L30 101 and the screen is cracked.
  I have the opportunity to buy not working Toshiba M40 - 221, which has a display of work.

  The screen will work and work well.
  Both models are in the range of satellite and both use the screen 15.4 inches and made the same applay to the keypad/keyboard

  Thanks for your time

  Hello

  I can't say for sure, but if two laptop computers supports the same screen size then you have a good chance to get the screen M40 working with L30 Series notebook.
  But if you want to be 100% sure, then I'd take a screen which has been published for the L30 series.

• Touch screen stopd woring with win8.1

  Touch screen stopd woring with after upgrade to win8.1

  My laptop is brand new S/N [thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].
  Model 15-n02eo

  How to solve it?

  Hey hsto;

  Thanks for the updated info!

  You can also try the HP Support Assistant: HP Pavilion TouchSmart 15-n029eo PC laptop support - HP Support Assistant. It can detect missing drivers and outdated software which may help.

  You can find information on how to use it and he can do here: HP Support Assistant.

  Let me know if the documents here and in my previous post help, solve the problem.

  HP Pavilion TouchSmart 15-n029eo Notebook PC supportLet me know if the documents that I posted here and in my previous post fixes the problem. http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123086-1&cc=us&DLC=en&LC=en&OS=4158&product=6608667&sw_lang=HP Support Assistant

• Just as a reference: how to FIX the annoying 'White Screen Of Death"with Silverlight and"Access denied"error with computer management.

  Well, I just hope that someone who has met these two mistakes will find my dose. It might save a lot of pointless research on the net.

  SYMPTOMS:
  -When you try to open a Silverlight application in your browser (Firefox, Chrome, IE, etc), your browser displays only a white area. When you right click on the white area, you can click on the Silverlight properties.
  -If you try to start "Computer management" by clicking on the 'My Computer' icon and select 'Manage', you get the following error: 'access denied '.

  CAUSE:
  The following errors are usually the result of a bad environment variable. In this case the "windir" environment variable does not work correctly. You can try running the management of the computer to start > run and entering:
  %windir%\system32\mmc.exe/s %windir%\system32\compmgmt.msc

  Notice the between the characters of percentage windir environment variable. If you run the above code, you will probably get an error saying that MMC cannot open the file. Look closely at the path, it's back!
  You will probably find any % somewhere.

  What actually happened here is the variable windir made reference to another variable: systemroot
  Why this creates problems, I'm not sure. Also, I don't understand what made then variable windir change.

  SOLUTION:
  -From your desktop or Explorer: right-click on "My computer" and select "Properties".
  -Click on the "Advanced" tab and then click "Environment Variables".

  http://pcauthorities.com/images/advanced-system-properties-XP.jpg

  -Did the windir variable. Together to "C:\Windows" do not think that it is already set to "C:\Windows", because windows then tells you. Double-click it to know for sure.

  http://www.adminxp.com/windowsvista/envvariabl.PNG

  -See, I told you! Change this to "C:\Windows".

  http://www.adminxp.com/windowsvista/editenvvar.PNG

  Hi Jooch,
   
  Thanks for posting such a detailed response, including symptoms, Cause, and resolution to "White Screen Of Death" with Silverlight and "Access denied" error with computer management"issues.
   
  I appreciate your time and effort to do the same. This could help other users of the forum as well.

• I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I can't get a secure boot or anything. are there secret shortcut keys or anything like that? !! ??

  Dear klh76

  You need a USB FLASH DRIVE, you can transfer the files from the Recovery Console Windows Vista from any other pc or laptop running Windows Vista, go to the backup and restore on the other computer and click on create a drive recovery system on the file menu. Once done, insert the usb key into the laptop, you want to fix, start by using selected peripheral USB device as MBR, follow these steps on screen, you can repair a corrupt Windows Vista it or restore to a previous restore point.

• While idle and when printing, display screen becomes blue with 0xb900103d messages

  Printer is HP PSC 2355 (ink jet)

  Windows 7

  Moved Office HP laptop Toshshiba

  Problem: While idle and when printing, the screen turns blue with one or two 0xb900103d or 0x8823cd1e messages.  Restart the printer corrrects the problem, but he finds himself in anywhere from 2 to 12 pages.

  Thanks for your help!

  There is a document using address type codes 0 x in the PSC 2355. This document can be found here.

  If this error appears when printing and idling, then I would say that this is probably an internal hardware issue with this printer.

  I hope this helps.

• (Redirected) Dell inspiron 15R 5521 become a black screen with blinking cursor after graphic update for windows

  Hello

  I m using dell laptop sice 2 years, last week I try to update my pc with windows last graphic update unfortunately after update, the screen become white with cursor flashing on it. Now I could not access my pc .safe mode not either work, attempted to pass the last known, good configuration but it does not work.

  someone pls help me in this regard. or help through [Admin NOTE: identification of Email deleted in accordance with the TOU strategy]

  While waiting for answer earlier...

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Backup my computer froze blue screen laptop

  After saving my laptop husbands with my new 2 TB external hard drive, I tried saving my laptop.

  At 01:00 I started the backup and at 08:00 I shook my mouse hoping that I would see the screen saying that my backup was successful.

  I finally got my screen turns on but I saw nothing else than a blue screen.

  I had to turn my computer off and then on again. I see the backup was not complete.

  I checked my folders in the WD hard drive and I saw my music was not completely saved, nor was my photos or videos (125GBtotal)

  1. I was wondering if maybe my mcafee launched a scan and mess?

  2. If I ever get a full upward, the next backup adds new files and folders and not take so long?

  Thank you

  Hey, I'm sorry for the delay. Make sure you have backups of the data before making experiences.
  It depends really what features chose you for backup. Usually software backup verify the current files and update, but they also can completely replace the existing or create a new backup.
  The antivirus program should not be a problem during a backup operation.

  Captain_WD.

• I keep getting blue screens on Page_Fault_In_Nonpaged_Area with technical information stop: 0 x 00000050 (0xD8CE3000, 0 x 00000000, 0 x 00000000, 0X82E77D2C).

  I work as a tech TI and at present, we use laptops Lenovo x 230, I have install Windows 7 Enterprise N and then General programs such as internet browsers, some software to sync files, a bunch of business called Visual files, and other small pieces such as Adobe Reader, etc.

  I keep getting blue screens on Page_Fault_In_Nonpaged_Area with technical information stop: 0 x 00000050 (0xD8CE3000, 0 x 00000000, 0 x 00000000, 0X82E77D2C). What happens on several machines and renders useless about 10 laptops for us because we use images of machine.

  I tried to use known last good config, I searched the corrupt drivers suggested in other posts, but they are not present, the center of the action cannot stop and I couldn't debug tool to work. Antivirus software can not also be that no problem because it is installed as part of the standard image.

  Forgive me if I posted this to the wrong topic area and any ideas would be greatly appreciated as this has been a matter of concern to me for almost 6 months now.

  Original title: Blue Screen Windows 7 Enterprise N

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".  We need at least 2 FILES DMP to diagnose and confirm
  
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive

  
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

  System specs are extremely useful then please include everything you know.

  The Zigzag3143.com team