T550 screen and processor

Similar Questions

• Questions from the screen and keyboard on Satellite R830-181

  Hello

  I had exactly the same problem with it;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=280934

  I also explained what is it and how it over time in this topic.

  To sum up; my screen and keyboard do not work in my Toshiba Satellite R830-181, 13.3 '' laptop.

  My questions;
  1. is it a motherboard problem?

  2. as it runs on an external monitor, I guess that the graphics card or processor is fine.
  There is no damage on the screen, so I guess there is a problem with the connection of the power supply to the screen.

  If I buy a new screen I have my doubts it will work.

  I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.

  What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  Same question applies to the keyboard.

  3. If I repair or fix myself, you think it will happen again? Because I think that this could be a faulty laptop computer of a certain series of production since someone else has experienced the same thing with this model.

  can 4 - there be a relationship between the non-functional keyboard and screen?

  5. If this can be resolved with a replacement of the screen, that I need to find a laptop screen Toshiba R830 or I can buy any 13.3-inch screen?

  As far as I know this model is not supported by the company more, so it is quite difficult to find a screen R830.
  It is difficult to find a 13.3-inch screen, anyway, but still, if I can use the screen of another model which would ease my problems.

  I need an idea on that.
  Thanks :)

  Post edited by: Cagri87

  > 1 - is it a motherboard problem?
  Not easy to say: If the external monitor works correctly then this isn't problem chart/motherboard.
  The external USB keyboard works properly, if not motherboard problem too.

  > 2 - because it works on a monitor external I guess graphics card or processor is fine.
  Yes, that's correct.

  > If I buy a new screen I have my doubts it will work.
  I do not recommend to buy the new parts before the defective parts has not been verified.

  > I'll probably send it to the service tech in my country (hard to find here reliable technology services Toshiba), however, I would like to know what may be the cause and if I can fix it myself.
  Good idea to send it to Toshiba service partner since the guys would be able to control parts and fix it.

  > What do you think guys? It is a power issue or a problem with the monitor itself?
  If a power issue or something else rather than the screen, how can be fixed?
  > Same question goes for the keyboard.

  Don t think someone can tell exactly what's causing this according to me its just a bad luck material can start malfunction happens in every possible branch of industries (TV, computer, smartphone, cars)

  can > 4 - there be a relationship between the non-functional keyboard and screen?
  No, the keyboard is only connected to the motherboard, display is also connected to the motherboard, but there is no connection between the keyboard and the display.

• Satellite M200 (PSMC0L) - Artifacts on the screen and crashes

  The problem that when the cold of the laptop, it overlooks all the objects on the screen and hangs. When the laptop going to warm up after 2-3 minutes restart or almost 5 minutes stay on BACK loading mode normally occurs. After loading Windows XP perform all tests, benchmarks fine
  If I try to cool down the laptop once it is warm after power again - the process of loading with objects repeats.

  the video with objects of cool start here:
  http://rapidshare.de/files/49056924/Toshiba_Satellite_M200_PMSC0L_BIOS_fw_ver_5_10.avi .html
  or
  http://DepositFiles.com/files/qk3j0ab76
  or
  http://uploadbox.com/files/c37cd63794

  A few weeks ago, I have a problem with Dual core boot and the frequency of the dynamic processor - laptop boots up to 6 minutes on WinXP clean and 6 hours to install
  WinXP on own laptop.
  When ONLY a core value and a constant frequency in BIOS - laptop runs well, but on 1 core 1.73 Ghz dual-core CPU
  But for a week, the problem disappeared.

  If there are thoughts on this occasion.
  Thank you.

  Hi inf24,

  It is difficult to say what is causing this problem, but such objects on the screen are normally associated with defective graphics card or wrong display drivers.
  I initially update the display driver, but only use the driver from Toshiba. Other drivers are not pre-tested and from my own experience, I can say that they could cause problems.
  Check this box!

  Regarding your CPU question I have no idea but if everything works at the moment it of pretty well! :)

• Lock screen and mouse L850 satellite every 2 seconds

  I think I have a hardware problem with the Satellite PSKDLA - 0C800R L850.

  It is a laptop I bougth to my wife but he has ended up with my stepson of Uni studies. While he had it the hard drive is not one of his friends replaced. twelve months later, he advised it was gone blackscreen and G'nort would turn out.

  I finally got hold of it again and managed to drain the power remaining and replaced the CMOS battery remove a strip of RAM and it starts fine. I've proved a faulty stick so that left aside. Then I realized that there was a problem with the screen and the mouse

  . The screen would brighten up (wash out) then Flash and stabilize. First thought was video chip or the driver.
  At the same time would lock the mouse. When the screen clears the mouse would again.
  Happening every three or four seconds but now every two seconds. It is more difficult to do something.

  Have reloaded many drivers, but I think it is material, but not sure if it needs a motherboard or processor.
  Can you advise?

  I forgot to mention that the image of the screen is slightly down from senior management.
  Tere is a few millimeters of black with a white line on the top edge of the image.
  This white line seems to come on and off with the locked mouse synchronization and the screen. This is another indication of the problem or the backlight?

  Hi, have you checked the thermal paste between the CPU and the heatsink?
  CPU fan blows hot air outdoors?

• 23 - d160qd envy: new motherboard, now empty screen and 6 beeps. Cannot change the legacy BIOS. Help!

  Good ladies and Gentlemenof the Interwebulars, I hope someone can shed some light on my situation.

  Walked down one day to see that my computer would not start. A diagnosis which in a bad power port. Got a new motherboard because after desoldering (or that's what I tried to do) I realized that it was small to (re) welding in and I could not find the right part to reorganize.

  so I got a new motherboard. The number replacement part direct. Barefoot on my floor wood and ESD wrsitband on, I put in this bad boy. Double and triple check things and connections. Go to hit the power button and I get 6 beeps and 6 flashes of correspopnding of the powerbutton. The system does not appear to be on, fan is running with the other sounds of starting and running sounds, but I have a white screen and orange electric button. If I tap CTRL + ALT + DELETE it will restart and begin the process again. The 6 beeps by HP standards denotes missing graphics / card error. My original motherboard had a built-in graphics card so I thought that the same new part number card mother too. Obviously not. so I had a Geforce 2Go MXM graphics card update with heat sink. Barefoot, wood floor, bracelet ESD, thermal paste and turn it on to hear... SIX BEEPS AND SCREEN WHITE.

  After Googling around, some people say that I have to enter the BIOS and change boot legacy and fashion out of the UEFI mode that's killing me right now. I have join and would completely if I could see my screen of the BIOS, or anything for that matter. I can not go back also to my other card because it will not feed. So my question; How to make or change the BIOS settings so that my computer will recognize a graphics card or internal graphic that should be on the new motherboard itself so that it starts?

  I need this computer for CAD work soon so I thought help processor i7, 8GBs RAM, Geforce card and touch screen to perform a generation of PC.  So if someone has a great idea they would projected upward on this post, I'd appreciate it. Thank you!

  Your computer is not posting, sound rather give an error message in the form of 6 beeps and red LED flashing, indicating graphics / video issue.

  You can never get into the BIOS of the device, if its not posting, not on a HP Desktop atleast.

  I recommend, you disconnect all components and fittings connected to the motherboard i.e. cables SATA, power cables, RAM, processor, heatsink, power supply and battery CMOS as well.

  Now, press and hold button power unit for a minute or two., with the power and everything is still disconnected.

  Then,.

  (1) Insert the battery CMOS back into its slot, install the processor and the heat sink, connect all cables power that goes to the motherbaord in the PSU and CPU and etc., less SATA cable and cable power to drive hard and Optcal drive and turn on the device, of course after you have connected the rear power cable.

  (2) check if the machine beeps and check whether it is 5 times.

  (3) If yes install a memory in the first slot (slot black), connect the monitor and turn on the power and check if there is no video output.

  (4) if so, connect the return which is always disconncted, to their respective locations and ports and turn them the unit on and get on with your CAD stuff.

  IF NO,

  2 options:

  (1) if the unit is still under warranty, call 1800-474-6836 and have a technician on-site visit your place and replace the parts needed for the operational unit.

  (2) or the motherboard you purchased could have been Dead On Arrival. Get a warranty replacement for the DOA mobo and re install a new Board of Directors.

  Good luck!

  Please click on the "congratulations, Thumbs Up" at the bottom of this post if you want to say 'Thank you' for helping!
  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

• Satellite 3000-214: after CPU upgrade no screen and no HARD disk activity

  Hey all,.
  I have a 3000-214 Satellite that comes originally with a PIII-M 933 Mhz. (SL5CG)
  http://videoff7.free.fr/sl5cg.jpg

  I ordered on eBay a second hand replacement (1133 Mhz) CPU SL5CK. (same number of pins, the same processor family: RH80530)
  When I go in, the laptop starts, but there is nothing on the screen and no HARD disk activity.

  So I asked the seller if he had tested the CPU, it sent, he said no and sent me 2 CPUs of replacement, another SL5CG and a SL64Z (which does not appear on the Intel site for some strange reason, but which is of the same characteristics as the SL5CG..)
  http://videoff7.free.fr/sl5ck.jpg
  http://videoff7.free.fr/sl64z.jpg

  The two processors give the same result with nothing on the screen and no activity of the HARD drive either.
  I checked my BIOS, it is the latest version: 2.30.
  Some laptops in the series 3000 Satellite (e.g. 3000-601), are delivered with a 1133 Mhz CPU (SL5CK) and also share the same bios exactly like my 3000-214. (upgrades to the bios on Toshiba website for my 214 & 601 are the same exact links and MD5 are equal). Also the 3000-601 & 3000-214 share the same chipset: Intel 830MP.
  But for some reason, it does not.

  EC which could I missed?

  It is always possible that all 3 processors that I was sent by the seller are dead, but it would be strange at this point, I think.
  So my question is, anyone have any idea what I might try to work or have experience with the upgrade a Satellite 3000 CPU?

  My warranty is looooong Sub anyway, so if a Toshiba employee could check in the basis of how fast max CPU can be used on the Sat 3000-214, I would be very grateful.

  Thanks a bunch for any info.
  Kind regards

  Alcahest

  Hello

  I studied a bit in the web and it seems that the Satellite 3000 has been bundled with Intel Mobile PIII 800, 850, 900, 1000 MhZ CPU

  I think that this will not work because of the speed of the CPU.
  In addition, I found this Toshiba document:
  http://support.toshiba-tro.de/KB0/FAQ5300W5000XR01.htm

  It is said that it is not possible to replace the processor in a laptop Tosh because processors are connected to the motherboard using a process called TCP tape carrier package.

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error on blue screen and SP3.

  Kept restarting my computer.

  Which was fixed by removing this option.

  Now, I get a blue error screen and error details show that the problem is with SP3.

  I have not SP3 as soon as possible, but Microsoft Essentials would not start until I downloaded the SP3.

  What should I do?

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Here are a few general BSOD issue and instructions if you want to understand our your BSOD and fix it.  If your system does not at all, do the best that you can...

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Your system seems to start OK and then crash or didn't he start not at all?
  Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.

  Sometimes BlueScreenView will involve XP files as being the cause of the accident (ntoskrl.exe, win32k.sys, hal.dll etc.) but they are probably not the real cause of the accident (BSV is doing the best he can).

  You will need to either pick up some example crashes over and look through them, or find somewhere the XP files are not the 'cause' or you can upload your files to your SkyDrive crash dump and someone with the windows debugging tools can help take a look at them more closely.

  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.

  Open BSOD.txt with a text editor Notepad, WordPad, etc.), select all (Ctrl-A), copy all the text in the Windows Clipboard (Ctrl-C) and paste the text to the Clipboard (Ctrl-V) back here in your next reply.

  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

  ==================================================
  Dump file: Mini102911 - 02.dmp
  Crash time: 2011-10-29 04:54:36
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 22f43
  Stack address 1: i8042prt.sys + 27fb
  Stack address 2: i8042prt.sys + 2033
  Battery 3 address: ntoskrnl.exe + 6e715
  Computer name:
  Full path: C:\WINDOWS\Minidump\Mini102911-02.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 2600
  Size of the dump file: 94 208
  ==================================================

  Send information BleuScreenView of 5 last memory dumps (if you have 5 dumps memory yet, send the most recent, you).
  While you wait, please follow these steps:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

  It is sometimes easier just to download the memory dump files since your last breaks down on your SkyDrive (everyone has a SkyDrive for file sharing).   So can someone who already has Windows debugging tools to look at things and understand what is happening.

  Dump memory of recent crashes and BSOD files are usually in this folder:

  c:\windows\minidump

  The files will be named something like this:

  Mini123011 - 01.dmp

  You need to download the latest... maybe 5-10 of the most recent crash dump files should be sufficient if you who have a lot.  If you do not have that much, send what you have.

  Getting started with SkyDrive:
  http://explore.live.com/SkyDrive-get-started

  Once you get your downloaded files and watch them on your SkyDrive, you need to 'share' your folders/files so that others can see them.

  Here is a link that tells you how to:
  http://explore.live.com/Windows-Live-SkyDrive-change-access-permissions-FAQ

  Then click on the button "insert a link".  When you click on that, a window opens that contains the link to your SkyDrive files.

  Copy the contents of the box "copy this link to share:" in selecting the content of the link (it will be all highlighted), press Ctrl + C (copy) and then come back to the forum and in your next message, press Ctrl + V to paste the contents of the link back here.

  What you paste the return will look something like this link on my SkyDrive:
  https://SkyDrive.live.com/redir.aspx?CID=6a7e789cab1d6f39&RESID=6A7E789CAB1D6F39! 311

• I get a blue error screen, and I suspect that it is a driver problem.

  Original title: can someone look at my mini dump file?

  I get a blue error screen, and I suspect that it is a driver problem. I can however point out from the dump file. Can anyone help? I have the latest file in my documents in Windows Live folder.

  Thank you.

  You have a fatal hardware error:

  Bug Check 0 x 124: WHEA_UNCORRECTABLE_ERROR

  This bug check indicates that a fatal hardware error occurred

  Record ID: 01cb520eaf797705
  Severity: Fatal (1)
  Length: 928
  Creator: Microsoft
  Notify the Type: Machine Check Exception
  Timestamp: 09-12-2010 0:09:00
  Flags: 0x00000002 PreviousError

  ===============================================================================
  Section 0: Generic processor
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80060b4838
  Article @ fffffa80060b4910
  Shift: 344
  Length: 192
  Flags: 0 x 00000001 primary
  Gravity: Fatal

  Proc. Type: x 86 / x 64
  All Instr. : x 64
  Error type: BUS error
  Operation: generic
  Flags: 0x00
  Level: 0
  CPU version: 0x000000000001067a
  Processor ID: 0 x 0000000000000000

  ===============================================================================
  Section 1: x 86 / x 64 specific to the processor
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80060b4880
  Article @ fffffa80060b49d0
  Shift: 536
  Length: 128
  Flags: 0x00000000
  Gravity: Fatal

  Local APIC Id: 0 x 0000000000000000
  CPU Id: 7 a 06 01 00 00 08 00 04 - bd e3 08 0c ff fb eb bf
  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

  Proc. Info @ fffffa80060b49d0 0

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80060b48c8
  Article @ fffffa80060b4a50
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Bank of Proc 0 0)

  Update the BIOS, check that the CPU temperature is not too high. If this does not work, replace the CPU.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot put computer to sleep without blue screen and crashed

  Hi guys, in the 3 months that my PC has been having this strange problem where seemingly randomly it selects to the blue screen and crashed. A few times, it was when I was not even at the computer, and no programs were running. Most of the time there will be a few moments after that, I chose the option to sleep, but also took place after I choose restart.

  My specs: Windows Home Premium 64-bit

  Intel core i3-4130 3.4 GHz

  8192 MB RAM

  2 AMD Radeon Crossfire 7790

  I thought I should also mention that I use a TV 48 "as a monitor screen.

  This is what usually happens after that my PC is recovering from the accident

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 1000007e

  BCP1: FFFFFFFFC0000005

  BCP2: FFFFF8800F1256B5

  BCP3: FFFFF8800BD51308

  BCP4: FFFFF8800BD50B60

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\042315-6193-01.dmp

  C:\Users\Corey\AppData\Local\Temp\WER-28563-0.SysData.XML

  I really appreciate any help I could get with this. Thank you!

  It seems that you have an unstable BETA AMD driver installed.

  Value of the element
  Name AMD Radeon HD 7700 Series
  ID of device PNP PCI\VEN_1002 & DEV_665C & SUBSYS_E253174B & REV_00\4 & 2F87A1B6 & 0 & 00E4
  Adapter Type processor AMD Radeon Graphics (0x665C), compatible with Advanced Micro Devices, Inc.
  Adapter Description AMD Radeon HD 7700 Series
  Adapter RAM 1.00 GB (1 073 741 824 bytes)
  Installed drivers aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
  14.501.1003.0 driver version

  http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2064

  Crash details.

  The debugging session: 16:32:23.495 Thu May 7, 2015 (UTC - 04:00)

  Loading user symbols
  Loading unloaded module list
  .......
  Cannot load the image \SystemRoot\system32\DRIVERS\atikmdag.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for atikmdag.sys
  ERROR: Module load completed but symbols can be loaded for atikmdag.sys

  06/05/2015 15:49 Windows Error Reporting bucket Fault X64_0x7E_atikmdag! OsServices::pOsServices + 5, type 0
  Event name: BlueScreen
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\050615-6411-01.dmp
  C:\Users\Corey\AppData\Local\Temp\WER-15350-0.SysData.XML
  C:\Users\Corey\AppData\Local\Temp\WER869.tmp.WERInternalMetadata.XML

  & #x000a

  Please go back to a previous version of the driver, linked below.

  Display Driver version 14.301.1001
  Driver OpenCL (tm)
  Catalyst Control Center
  HydraVision

  http://support.AMD.com/en-us/download/desktop/previous/detail?OS=Windows%207%20-%2064&Rev=14.9

• Alienware 14 screen and video update?

  New to this forum, but not new Alienware products. I know that some things are extensible and others do not. My question:

  Of the 14 Alienware (2013) can screen and video cards be improved for the full HD, or am I stuck with the WLED display with 1366 x 768. I'm sure that the video card can be improved to the GT 756 m. I have the 750 m from there now.

  The Intel HD 4600 is the part of the processor. The GT 750 m is soldered on the motherboard. The iGPU (Intel) is to save energy on the battery, and the dGPU (750 m) is for energy, as for games.

• everytime I open my files in HDR pro it gives me a black screen and my lightroom not gives me the possibility of HDR?

  whenever I try to use my HDR pro it gives me a black screen and lr does not give me the HDR option

  Hi cheryld,.

  Please update the drivers of graphics processor on the manufacturing site, also the Version of Photoshop to 2015.1.2.

  Photoshop CC 2015.1.2 update now available

  And you need to select several images in Lightroom > menu photo > edit in > merge HDR Pro in Photoshop.

  Kind regards

  Mohit

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• I broke my screen, and now cannot drag to open it.  I have an alarm that don't go.  I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  I broke my screen, and now cannot drag to open it.  I have an alarm that don't go. I can let the battery die I know but I really want to be able to access and examine what are the texts I received today. I think that my ICloud is can be disabled. I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  Without entering your access code, it is not possible, unless your time is in iCloud. If this is the case, connect to iCloud.com to check your calendar.

  Good luck.

• IPhone flattened my mother fell and broke her screen and I bought a new Yvonne, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  IPhone flattened my mother fell and broke her screen and I bought her a new iPhone, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  Yvonne > > iphone

  Sorry