Choose to restore the device on itunes or the device?

Similar Questions

• Audition 5.5 crashes when choose 'continue' restored the session

  I left Adobe Audition after registration, but without saving the changes.

  When I opened the hearing, it allows me now to continue the unregistered session, or delete.

  But when I click on 'Continue', it starts loading but crashes then... I tried to restart my computer, but that didn't help.

  Is it possible to restore the saved file? I need not of the session, just recording. Where it will be parked?

  Did you record in multitrack view or waveform? It makes a big difference, because multitrack, you will be saved directly to a specified file location, but in the form of wave, it would be in a temporary file in any location you save (see preferences settings in the hearing). If you will be able to retrieve any directly with ease is another matter overall, although...

  What it amounts to, is that how you use recovery files is exactly the way that you tried to do. A big problem you might encounter is that however once you tried to reopen it and failure, it may well have cast as hearing closed a second time in any case. I believe that it was true that sometimes you might retrieve the data from these files by them as 'rough' and providing appropriate information on how they were saved, but I have not tried this during so long that I don't know if it still applies.

  I'm afraid that I don't rate your chances of any degree of success very strongly, frankly.

• Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Hello

  Did you follow the "AutoPlay Repair Wizard"?

  You can follow the link provided in the previous post. Later, check to see if the problem persists.

  Hope the helps of information.

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Cannot restore the iPad 2 on iTunes

  My iPad 2 is stuck in the loop of Doom... continues to try to restart, but won't, try infinitely.  I connected to iTunes.  Update was not an option, but he tried to restore.  I tried twice, and after each attempt, iTunes gives the error message "this iPad could not be restored.  This device is not eligible for the requested build. "I guess that's too old for the restore iTunes tent sotftware?   How to restore an old model?   I prefer an old iOS, so this isn't a problem.  Thanks for your help!

  This might help: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  If you see error 3194, error 17, or "this device is not eligible for the requested build" in iTunes - Apple Support

  FYI: The device will restore the most recent version of the iOS that supports your device.

• When you restore the backup on itunes, will be saved the apps already on the ipad?

  Hello

  When you restore the backup of itunes

  for an air2 ipad has already I want to keep, new applications

  the new left on ipad?

  Thank you very much!

  Backup restore will overwrite the device.

  You can re - download apps that are absent from purchased.

• Restore the iTunes app data backup and backup to iCloud

  My iPhone 6 has been stolen. I got iCloud backup enabled, and the last backup was 2 days.

  I do a full backup encrypted via iTunes it also sometimes manually, the last time was 1 month ago.

  I bought a 6 new iPhone as a replacement. When I tried to restore from your backup, everything (photos, applications, settings) seems to be restored very well, but most of my applications (not all) were missing from their app data.

  More importantly, Google Authenticator, which had all my keys to two factors and in hindsight, an app that follows the historic activity and has experienced a year of daily data stored on the device value authentication.

  I don't understand why it affected only a few applications, but not all. Most applications requiring a login account is no longer connected, makes me think that their data was not were properly restored either. I found one or two applications that had some settings restored properly, but most of my apps seem to be returned to a State of the new facility.

  I tried to re-do the restoration of iCloud again and got the same results.

  I'll try the iTunes backup restore then, but even if it works I would miss even 1 month of a data value. Is it possible to recover this data? I guess that that's actually in the iCloud backup 2 - old days, but for some reason any, that he is unable to restore.

  Is it possible to combine the full restoration of iTunes and then update with the most recent data backup to iCloud app?

  Update: when I tried to restore the iTunes backup I received this error a few minutes:

  

  Is it because the original phone was an iPhone 6 and the new phone is a 6s? Is it possible to access my backup?

• To restore the backup of information to my new iPhone 7, I had to update iTunes.  I did it on my computer, but when I plug my phone into the computer, it tells me that I need the latest version of iTunes.  What should I do?

  I downloaded the latest version of iTunes to restore the backup of my new iPhone 7.  When I plug my computer into iPhone 7, I get the message that I need to update iTunes.  It is to show that I have updated the latest version, so I now do not know what to do.  Need help!

  In iTunes, go to the ' about iTunes' topic. What version do you currently use?

  What version of OS are you using on your computer?

  Your new phone should you use iTunes 12.5.1 requiring 10.9.5 OSX or higher.

• If you choose to download the originals to your device involved the complete iCloud library or only the items originally taken by a device?

  If you choose to download the originals to your device which means your iCloud full library or just the pictures and photos taken with this camera? For example, the pictures on your Mac which are also on the iCloud photo library, ones which also downloads to the device for example an iPhone?

  Thank you

  Originals of pictures of your current iCloud photo library will be downloaded into the unit, if you do not use 'optimize storage '.  Disable this option only on your iPhone If you have enough of free storage on the iPhone for the complete iCloud photo library on your device.

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.

• Restore the new backup device

  Hi all

  I'm going on vacation soon and I am owner of an iphone more than 6 s. As it is a holiday adventure I plan take my old 5 c.

  I have not used the 5 c in some time, and was going to factory reset it and then restore from my back icloud up.but install a sim card different (cheaper local sim)

  I can do, what steps and be my 6s still be updated and fully working at home >

  Kind regards

  DJ

  Yes.

  You can restore the older device with a more recent backup file.

• iTunes has changed the order of songs on an album. How to restore the original order?

  I have a classic album. iTunes has changed the order of the songs. How to restore the original order?

  Order of songs is controlled by the number of drive and the beaches. Set them accordingly.

  TT2

• Omen of HP 15-5000na: \Device\RaidPort1, restore the device, has been published.

  Hello

  My computer laptop freezing from time to time for 15-20 seconds (about 8 - 9 times per hour). When the gel it is impossible to make any disc operation, that is, open the file, or start the Explorer... the disk in the Task Manager activity is 100% reading.

  The only thing I found suspicious is a message in the event viewer / newspapers Windows / system that says:

  -------------8<--------------------------

  Source storahci

  Event ID: 129

  Text is: restore the device, \Device\RaidPort1, has been published.

  -------------8<--------------------------

  I search on google for that matter. I have set up my power plan high performance with settings for "PCI Express" / link state power management 'Off' (was befor change moderate energy economy)

  But this has no effect portable stell gel.

  I have no other choice for any type of RAID in my BIOS and my HARD drive is SanDisk SD6PP4M - 256 G-1006.

  SanDisk dashboard software indicates that the SSD is O.K.

  Windows 10 updates and drivers are up to date, also I flashed the BIOS to the latest version

  Any ideas how to solve this annoying gel are welcome, I will try all of them.

  Kind regards

  spetrov

  Hi go2.

  Thank you very much for the detailed information.

  I installed the hp support assistant and this software updated my drivers for more later you mentioned in you post.

  I can't find how to rebuild my raid (which I don't have) in the Intel Rapid technology software, there are only a few options awailable in this software and none of them can be used to rebuild the raid.

  However, I managed to solve this problem with the activation of additional options for power plan settings for hard drive

  named "AHCI Link Power Management - HIPM/DIPM" registry and then, after that the options are visible in the settings of the power plan, set options for DIPM (HIPM is not taken in charge of my hard drive).

  This link provides information how to activate this option of additional hard drive in the power plan settings and how to change them.

  http://www.SevenForums.com/tutorials/177819-AHCI-link-power-management-enable-hipm-DIPM.html

  Best regards, spetrov

• 8600 OfficeJet all-in-one: "device" to choose to install the HP utility

  I am trying to install the HP software for my 8600 Officejet printer all-in-one.  I'm at the point where installation implemented asks me to select the device you want to configure.  There are two devices, which are both the same 8600 printer (have the same IP address listed in "Détails" field), but each has a different 'link' listed.  A watch his connection as 'IP', the other as "Hello".  Which should I choose to be the device to set up for the installation of the software?  The type of connection made a difference of function?  Thank you.

  Hello

  To get all the features like analysis select the Hello device and follow installation.

  To ensure that you will be able to use all the features.

  Kind regards

  Shlomi

• Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

  Hi all

  Source:-elxcna (adapter Emulax CNA)
  Event ID:-129
  Error:-\Device\RaidPort1, restore the device, has been published.
  Server:-Server Rack, Windows 2008 R2
  Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

  Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

  Up to now steps below was taken but no luck:
  1. test Unit Ready has been disabled in the registry
  2 adapter ANC, fresh of zoning has been replaced.
  3 firmware and driver from the adapter of the ANC has been updated.
  4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

  Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
  This 129 February 26 event id error 03:00.

  Need help? :)

  Hi SabarnaDeb,

  Thanks for posting your query in the Microsoft Community Forums.

  As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.