Chrome, playing all the symbols at once despite triggers "stop"?

Similar Questions

• Animate edge playing all the symbols on replay?

  Hi, I'm at the end of my mind here - I've created a basic using edge Animate CC 2014.0.1 animation, featuring groups of symbols that have a stop triggers at the beginning of the animation and are then played at the right time. It works very well - the first time through. However, I added a button 'replay' loops back up to a point at the beginning of the animation (but not at beginning) and playback, all the display symbols their state final from the beginning (even if I them had melted to 0 before the outbreak of the loop), until they play again. This seems to happen if I loop at the beginning or at another point.

  If this sounds familiar, it's because I asked a similar question a few months ago (about symbols automatic playback), but this time no amount of tweaking or trigger pushing doesn't seem to clear them. Any thoughts? Composition is attached.

  http://iancareyjazz.com/documents/symbol_problem.zip

  Any ideas are appreciated!

  Ok. I corrected your file:

  1. put all the symbol with autoplay off
  2. has off stop() all at the beginning of all symbols
  3. reset all symbols to 0 on the start_button
  4. added play() for the symbol of diversity on the Start button

  I hope this helps.

  https://app.box.com/s/4f46r5k7bi6fnmbqehzx

• Dear all, I can not play the flash videos from any website through firefox because it freezes, but when I run firefox as administrator, then it works fine (but Google Chrome plays all the videos normally.). I use Windows 7 & Firefox 7.0.1. Help, pleas

  Dear all,
  Firefox crashes when I try to play flash videos from any website, but when I run firefox as administrator, it works very well. (but Google Chrome, Opera & I.E9 video parts without administrator.) I use Windows 7 & Firefox 7.0.1. Help, please.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• radio station, playing all the time

  I've got a radio playing all the time and I don't know where it comes from.  I looked everywhere trying to shut it down.  I restarted the computer and it does not always help.  Can someone tell me please how to close the program.  Looks like it's maybe several stations playing at once.

  Hello billyepat,

  I see that you have problems with a radio station on your computer and you cannot shut it down. I have some suggestions that can help with this question.

  I would first do a clean boot on your computer. It is possible that there is a starting program that is causing the radio station to play. Here is a link that shows how to perform a clean boot on the computer.

• How to disable all the selections at once?

  How to disable all the selections at once?

  If you are referring to the playlist, artist, album & kind selection boxes, then I don't think that there is a way to uncheck those all at once.

  If you mean the boxes in the view of songs Ctrl + click and the checkbox to check or uncheck all of the boxes. Note, however, that the use of these boxes is a bad way to manage the synchronization. Uncontrolled songs are ignored in the normal course of track in track or shuffle playback. Better to use one or more playlists to control what is synchronized and have checked most, if not all of your library. Items not controlled in my library are things like interview bonus tracks that had never what to hear accidentally, I keep in my library.

  TT2

• Save the data of State machine after each iteration, then write all the data at once

  I have trouble finding in the best way to manage data generated by my state machine. Here are the data that it will save:

  * When pressure is set, a set point is returned.

  * When the pressure is set, a reading is taken a multimeter.

  What would be the best way to do this? Would it not be better to store all the data in memory, and then write all the data at once? If so, what would be the best way to do this? I want to use the tool to generate report after have set all the pressures. I joined my current application. Thank you all!

  
  

• PDF to excel. Output has all the symbols. How to fix?

  I wanted to convert my bank statement more to Excel, but it came all the symbols?

  Hi CURTIS OTSUKA

  There are several reasons this could happen.

  To get an idea, you can visit this link: text is distorted in the converted file. ExportPDF

  Kind regards

  Tariq Dar.

• Creating GIF images, how to edit all the images at once?

  Hey everybody. So I now how to make GIFS images already. The problem I have is that I can't find a way to edit all the images at once. I want to brighten them up and add curves, perhaps refine.

  I tried to select all layers, but all image editing in grayed out options and were not available.

  I really want to change individually the 58 frames, lol.

  Is there a way to edit all at once?

  PS - I use Photoshop CS3, if that helps!

  Thank you very much!

  Mike

  Have you tried to convert all layers to a smart object or group together them? Then apply your effects to the dynamic object or group.

• I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  For later use, it happened because your fields have the same field name, and fields with the same name automatically have the same value.

  So all you had to do was so each had a unique name and it would have worked, but using the command create several fields is preferable because it renames the fields for rename you them.

• Show/hide the problem and playing of the symbols

  Hello.

  I have a problem with the instructions Show/Hide and play - my problem here:

  I have 4 buttons (symbols) in the stadium: "sectionOption1a_Btn", "sectionOption1b_Btn", "sectionOption1c_Btn" and "sectionOption1d_Btn".

  I also, what I call, 4 'options': 'Option1a', 'Option1b', 'Option1c', 'Option1d'.

  Each of these symbols of 'Options1X' have a 'melted' and 'melted' animation - 0 ms and ms 2000, respectively (within them).

  Each button runs each own option:

  "" 'sectionOption1a_Btn' ' CLICK ' symbol 'Option1a' tracks

  "" 'sectionOption1b_Btn' ' CLICK ' symbol 'Option1b' tracks

  "" 'sectionOption1c_Btn' ' CLICK ' symbol 'Option1c' tracks

  "" 'sectionOption1d_Btn' ' CLICK ' symbol 'Option1d' tracks

  All "Options1X" are hidden, except one that is active.

  The problem:

  Let's say I have "Option1c" active and I want to go to the "Option1a". So, I click on "sectionOption1a_Btn". When I do this, I want the "Option1c" to run is "bland out' (inside himself, to 2000 ms) and then run " Option1a" 0 ms - it is own"fade"while keeping all the other "Options1X" hidden, of course."»
  

  I hope that I didn t more complicated my explanation.

  Here´s a schema:

  

  Thanx.

  Hi there, you can implement such a feature in 2 tracking variables. YER essentially saying 'currentOption' to unfold on click of a button and the definition of the "requestOption" according to the click button. At the end of the coast anim current outro, yer by calling the 'playRequest' function to play the requested side.

  Put this question to the stage.compositionReady event:

  var currentOption = null; / / a, b, c and d

  var requestOption;

  called by the event of timeline.complete at the end of each Option

  sym.playRequest = function() {}

  sym.getSymbol("Option1"+requestOption).play ("is");

  currentOption = requestOption;

  }

  called when the button is clicked

  sym.btnClick = function (request) {}

  requestOption = request;

  {if (currentOption)}

  sym.getSymbol("Option1"+currentOption).play ("fadeOut");

  } else {}

  sym.playRequest ();

  }

  }

  Put this on a button click:

  sym.getComposition () .getStage () .btnClick ("a"); / / or b, c and d for each button

  Put this question to the event timeline.complete of each Option symbol:

  sym.getComposition () .getStage () .playRequest ();

• I imported bookmarks in Chrome, but all the links are bad

  I'm moving from Chrome to Mozilla to work. I have work of many associates of bookmarks. I exported the booksmarks of Chrome and put them on my desk. Then I opened organizing bookmarks on Mozilla and imported. They are there, but all the links are the same, on some BBC News site (which was not one of my favorites!) I am very frustrated and have uninstalled and reinstalled Mozilla nothing helps.

  Never mind. I fixed it.

• I have a little problem with my HP KU0841 keyboard I used to be able to hold two keyes to get the symbol for the pound sterling but it won´t work now all the ideas that I hit to stop this work?

  Can anyone help please.  I used to be able to get the symbol for the pound Sterling by pressing ALT and 0163 at the same time, maybe you'll know

  That's how you used to make the binary code on non-electric machines punch original card.  This will make me sound old?

  It's very frustrating that nothing bought here in Spain is not consistent with the rest of Europe, it is purely for the Spanish market.  I need to use this and other symbol that don't appear on my keyboard, but it is very - very sensitive touch and I think I must have hit another function key for stopping this work but can find nothing written on the computer and the manual was not in the box. as usual.

  Please let know us if possible thank you.

  Start > all programs > Accessories > system tools > character map

  http://symbolcodes.TLT.PSU.edu/accents/Charmap.html

  You can drag the key and drop it in your report or use the code indicated in the bottom right of the application

  Key codes Alt Windows

  http://symbolcodes.TLT.PSU.edu/accents/codealt.html

• When I try to play solitare, I get (like my first game), a game that has already been played? I used to play all the time, but now it does. Can you tell me how to fix it?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Open Windows Explorer, navigate to c:\users\username\saved games\microsoft games\solitare.  You see a game called Solitare.SolitareSave - ms? If so, this is the game that retains the proofreading.  Try to delete this file and rerun Solitare.  If this is the Spider Solitaire, you play, change the link above for Spider Solitaire.

  You could also try to delete and re-add the game.  To do this, click the Start button, type programs and features, or turn off Windows features turn on, uncheck the games box and click OK.  Then click on or turn off Windows features turn on once again and double-check the games folder and click OK. This will reinstall the games.

  Hope this helps,

  Barbara

• Its outcome - Hamming beep when I play all the audio/video devices

  beep

  My laptop beeps of hamming I play all audio and video devices, it continues until the devices are on and its volume increases if the speaker volume is increased and decreases in the same way. If I use the head phone then it is not present.

  It started when I got a few voices calling google talk webmail, ifone, etc.. My laptop is just 1 month, what to do?

  Hi Rajesh Kr Singh,

  Step 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to accompany all the symbols of currency last in SQL Server 2008 for Windows 7?

  Hello

  I need support for all currency symbols last in SQL Server 2008? Is there an update to this?

  Hello

  Support for SQL Server is not provided in these forums. On the other hand, it please repost your question Microsoft TechNet or MSDN here forum:

  SQL Server forums    (TechNet)

  SQL Server forums     (MSDN)

  Thank you.   :)