Chronological model

Similar Questions

• AWR time model statistics vs SQL Statistics

  Looking at an AWR report took on a unique snapshot interval, I note the following:
  
  In time model statistics, DB time is listed as 161,47 seconds, with sql execute represents the time of 127,83 seconds.
  
  When I DBA_HIST_SQLSTAT to queries on the same cliché and summarize all the elapsed_time_delta of each SQL stored in AWR, I find that it's 132,05 seconds, even after filtering of all PL/SQL (command_type 47) and each SQL with parsing_schema_name SYS.
  
  If anything, I expect this sum less than that contained in the statistics of the model time, thinking that only the top n sql is included in DBA_HISSQLSTAT.
  
  Does anyone know where my reasoning was an error?

  KDeWeerd wrote:
  Detailed analysis of an environment, trying to give meaning to all the numbers and to explain things to people doesn't make not easier if you can not all numbers that collects Oracle corresponding to some how.

  Yes, I understand. Here you can not because the statistical statement have no knowledge of what what call. This is probably why Oracle introduced the chronological model: it gives information that you can't derive from other sources.

  Any timed operation will be buffer at most 5 seconds of time data. This means that if a timed (such as the SQL execution) takes a long period of time to perform, the data published to this point of view lack maximum 5 seconds of the time accumulated for the operation.

  Can't really make sense of interpretation which

  means that the value may be missed for 5 seconds for each running of instruction.

• Is there any problem in the planning of the GATHER_STATS_JOB during peak load times?

  Hi all
  
  The default DBMS_STATS (GATHER_STATS_JOB) job runs during our peak load time.
  
  It will have a performance impact on normal database transactions?
  
  Is it better to postpone this window?
  
  That all the problems can we expect during the execution of the task (locks object, IO high due to table / index readings, high use of the CPU etc.)?
  
  Please help me to get the answer. I could not find the net information.
  
  Thanks and greetings
  Smail

  Sissi C V wrote:
  I'm fighting to find a suitable period for the task that this database is active 24 * 7 in the world.

  I want to know how the activity must be measured. It will be based on the number of sessions or number of transactions or number of cursors or net i/o or a combination of all these?

  Satish,

  If you have the license of AWR, you can consult the AWR reports to see when your database is no longer idle. In the 10 chronological model g, the most significant aspect is the DB time has passed, so the period where the DB time is less could be a good candidate.

  You can also check the number of logical/physical i/o performed every second, the number of sessions and other ratios that appear in the upper part of the AWR (for example the "Load Profile" section) report.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Backups Time Machine missing after model clean install

  For a Mac using Time Machine to back up, is there a way to clean install OS X for a new internal SSD and keeps backups Time Machine historical which have been made using the previous internal SSD?  While as I use it to back up the new internal SSD TM, TM will show the backup history of both the previous internal SSD and the new (up to the capacity of the disc from the TimeCapsule).

  MacBookPro8, 2 I used Time Machine on a time Capsule TB 3 towards the rear for 2 years. No problems and shows 2.24 available 3 TB.

  Last night I did a clean model 10.11.5 install a new SSD, and a transfer application, the user accounts Migration Wizard, etc. Since the previous flash SSD disk internal (format / installed the new SSD, attached to the internal SSD previous via USB flash disk, then started in Recovery Mode to clean the installation model to the new internal SSD and when prompted did the previous internal SSD Migration Assistant).

  Everything no problem above went very well. But now when I "TimeMachine enter", I see that the most recent backup made (before the clean install).  The right navigation (which goes in reverse chronological order of the lower part of the screen to the top) seems to show the date on which the previous backups have been identified.  But if I click on a date, TM Finder main window does not scroll from that date. The top / arrow down buttons to the right of the main window of Finder TM also do not respond to clicks.

  So far as I can tell, I've lost all TM backups except the most recent. I have all saved data elsewhere outside time Capsule, so between that and the 1 backup, I can see in TM I have not lost anything.

  If I had done the Migration Wizard from the TimeCapsule rather than the previous internal SSD flash drive, would that have kept all historical TM backups?

  Thanks for any idea

  Time Machine, please press the shift-command-C key combination. The windshield will show the mounted volumes. All snapshots should now be accessible. Select the one you want and search for files to restore.

  If you need to restore from a backup of the hidden user library folder, first select a snapshot, and then press shift-command-G. A go to the folder dialog box opens. In this document, you enter the path to the folder. The dialog box will help you by automatically filling parts of the path when you start typing.

  The path starts with the slash character ("/"). Enter that. The rest of the parts is separated by slashes.

  The next part is the date and time of the current snapshot. Enter a '2', and the rest of the date should be filled in automatically. Press the right arrow key to access the end of the path. Enter a slash to start the next game.

  Next is the volume name (usually "Macintosh HD" unless you assigned a different name.) Start typing, then jump to the end and enter a slash.

  The next part is 'Users', followed by a slash.

  Then is your short user name. It is also the name of your home folder, which is represented by an icon of the House in the sidebar of a Finder window.

  Finally, enter "Library", and then press return. You should now be in the library folder. From there, you can move like in the Finder. You can also select another snapshot of the same folder.

• change the folder view to alphabetical to chronological windows Explorer

  I want to change this chronological order of watching one of the subfolders in alphabetical.

  Exp: Under my pictures folder, I have subfolders by year (i.e. 2006, 2007, 2008, etc.) who orgaize in chronological order but the subfolders of those subfolders are the months of the year and they are the list alphabetically - even if I spent a year at the front or at the end of the name of the month (so it still lists like this (: October 2006, September 2006)

  I want to know if there is a way to get the subfolders to list as a calendar discovering putting an order number or letter before the month month.

  Thank you

  MOM of Godzilla

  You want cannot be done because it recognizes the names like alpha-numeric characters and sorts alphabetically (just as it does for years - but this market because they are numbers).  Try to use a designation number instead of the alphabetical name of the month - 8-2006 to August 2006 and so on.

  If it is possible (and I don't), the answer is maybe in one of these articles (especially the sort order on one) - but probably you'll learn from them that's not possible because you have things to put in place:

  Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

  It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

  Sorry it wasn't the answer you wanted to hear.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Source text: SEO in a separate model?

  Hi all

  I'm trying to implement a model that has a model when the user changes a single word of the text.

  I made a different model, where I want to just outline the same text - and to synchronize their place I am linking to the parameter of source text with the selection icon - so that when the user changes the text, the plan will also be updated correctly. So far so good.

  This breaks as soon as the user changes the type parameters (size of the font, follow-up, it).

  So I need a better way. I thought about just the model in the chronology and duplication using edges to find, but it is unclear from what I can tell

  Thanks for your advice!

  ML

  Because of this support:

  

  Just using around Matt neck on a copy of the layout of the Master text as a track matte Alpha inverted for a copy of the layout of the text with a blue fill Master applied.

  If you need more contour, you can add another copy of dilated-eroded repetitive.

• Captivate 9 - preview the slide entire chronology does not

  HI - Captivate and really stuck on a fairly new basis. So basic I couldn't find answers anywhere.

  My project has slides that work for different durations. I set by default to 20 seconds in the Preferences tab.

  But whenever I saw the project then it works for about 10 seconds and all animated to appear after that which is not.

  It's driving me crazy.

  If I play the chronology of slide everything works perfectly but not in preview (except "play Slide").

  I don't know if its a problem with the preview or my project, but it is a real stumbling block.

  Any suggestion or ideas appreciated.

  Graeme

  Unless there is an interactive object in the Group_29 that is not developed, there is no reason why this slide show only up to 10 dry. Another possibility would be an interactive object on the model of used slides, with a pause or an interactive object on a previous slide that is scheduled for the rest of the project. In both cases, you should see this object on the stage.

  BTW, slide Play isn't an overview, only way to synchronize objects like you did with the timing. If another preview of the method (the best are previews of browser) lead the slide stop somewhere, there should be a break. You can check in the preview if the progress bar in a PlayBar stops?

  Another less likely cause could be that the objects does not, are set to be visible in output: check the "eye" icon in the properties panel in top left.

• Error state of accomplishment in OSM 7.2.4 modeling

  Hi all

  I recently created a sample cartridge in OSM 7.2.4.1.

  I created a new map of the State of implementation. States of external accomplishment configured are 'IN_PROGRESS-PROVISIONING_START' and "IN_PROGRESS-FULFILLBILLING_START" for the basic model of achievement. Even are mapped to internal reports with the same names. "I created one works and through internal automation updated control data"ControlData/OrderItem /OrderComponentName/ExternalFulfillmentState"with"IN_PROGRESS-PROVISIONING_START". However, I get the following error.

  < 12 January 2015 10:53:17, 459 IST AM > < INFO > < impl. CascadingLRUAlgorithm > < timer-4 > <

  Cache % complete # orders Info

  ---------------------- ------ -------- -----------

  Closed order hide 0% 0/50

  Chronological order Cache 0% 0/1000

  Order Cache 0% 1/1000

  Redo the Cache of order 0% 0/1000

  >

  < 12 January 2015 10:53:22, 147 IST AM > < INFO > < automation. TaskContextLocal > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < com.mslv.oms.automation.TaskContextLocal.RESPONSE_SOURCE_CLASS value javax.xml.transform.sax.SAXSource >

  < 12 January 2015 10:53:23, 300 IST AM > < ERROR > < impl. AbstractFulfillmentStateProvider > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < configuration no. Fulfillment State maps found.

  OrderId 68, OrderItemId 1421040197337

  External completion status - [IN_PROGRESS-PROVISIONING_START]

  OrderItem specification - [COM_SalesOrderLine] [COM_SalesOrderFulfillment]

  Orchestration sequence - [COM_SalesOrderFulfillmentOrchestrationSequence] [COM_SalesOrderFulfillment]

  Realization mode - [OFFER] [COM_SalesOrderFulfillment]

  Specification of the charges-[Service.Voice] [COM_SalesOrderFulfillment]

  Specifications - [ProvisioningFunction] [COM_SalesOrderFulfillment] OrderComponent,

  State current Fulfillment - [NO_STATE]] >

  < 12 January 2015 10:53:23 IST > < error > < SGD > < BEA-000000 > < impl. AbstractFulfillmentStateProvider: No configuration of Fulfillment State map found.

  OrderId 68, OrderItemId 1421040197337

  External completion status - [IN_PROGRESS-PROVISIONING_START]

  OrderItem specification - [COM_SalesOrderLine] [COM_SalesOrderFulfillment]

  Orchestration sequence - [COM_SalesOrderFulfillmentOrchestrationSequence] [COM_SalesOrderFulfillment]

  Realization mode - [OFFER] [COM_SalesOrderFulfillment]

  Specification of the charges-[Service.Voice] [COM_SalesOrderFulfillment]

  Specifications - [ProvisioningFunction] [COM_SalesOrderFulfillment] OrderComponent,

  State current Fulfillment - [NO_STATE]] >

  < 12 January 2015 10:53:23, 303 IST AM > < ERROR > < impl. AbstractFulfillmentStateProvider > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < configuration no. Fulfillment State maps found.

  OrderId 68, OrderItemId 1421040197338

  External completion status - [IN_PROGRESS-PROVISIONING_START]

  OrderItem specification - [COM_SalesOrderLine] [COM_SalesOrderFulfillment]

  Orchestration sequence - [COM_SalesOrderFulfillmentOrchestrationSequence] [COM_SalesOrderFulfillment]

  Realization mode - [OFFER] [COM_SalesOrderFulfillment]

  Specification of the charges-[Service.Voice] [COM_SalesOrderFulfillment]

  Specifications - [ProvisioningFunction] [COM_SalesOrderFulfillment] OrderComponent,

  State current Fulfillment - [NO_STATE]] >

  See this error on update I get a feeling that my card is getting hit, but somehow, it is not able to choose the internal state. I checked the namespaces of accomplishment State card and stopped just to be sure.

  Can someone point and tell me what I'm doing wrong?

  Hi all

  I write the answer here, as it has been resolved myself.

  Realization State map configuration was perfectly fine in the sequence of the orchestration, however, I had selected system and granularity stage as well but I was not breaking down my order in actual orchestration and use of element of functional order only. that is my key component consisted only of the name of the function that's all.

  Today, for some reason, I removed the scene and the stages of granularity and the rules started to get picked up and I got the xml code updated in GetOrder.Response.

  Kind regards

  Magalhaes

• Dynamic links does not show a 3D model

  Hello. I use Dynamic Link a log time ago, but now I have some problems.

  I work in a project in first CS5 when I send to After Effects, I convert this composition in a 3D layer and adjust some parameters of transformation. If I change the scale and Position works very well and it immediately shows the first.
  But when I change Orientation or Rotation, it doesn't do anything in After Effects either.

  
  I thought it was a problem in preview only, so I made the model of EI and first and he was wrong.

  I have attached a picture of what I'm doing. You can see the "Orientation" settings in 328 °, but it does not show the screen.

  What can I do? What I am doing wrong?

  Thanks for your help.

  It seems that you have a collapse of the lit transformations and the layer of film is a composition. I guess the Maria Isabel.avi in the composition of Maria Isabel.avi is 2D. With collapse transformations turned on what you see is a normal behavior.

  What you want to do is just right click on the AVI of Maria in the chronology of the first and select replace with After Effects Composition. Once inside AE not pre compose layer avi, just make it 3D.

  The other option would be to open the composition of Maria Isabel.avi and make your 3D transformations there.

  Still another option would be to disable the transformations of the collapse.

  I don't know why the images of Maria Isabel.avi was previously comped. I see no cases in the screenshot that gives me a reason.

• In what directory Pages stores my models?

  I just did a clean install of Sierra. Before doing so, I backed up my documents, made a disk image of the drive and ran Time machine. I had *-U - MEd my models were either in Documents or Application Support, but after the installation of 6 Pages, I both can't find where I drag my old models, even if I could find them on the previous disk image. Please notify.

  If you are migrating your data and files using migration Assistant in your folder utilities, the models have to migrate with your software.

  Peter

• I've not updated iOS 10 to my model MD544AE/a mini iPad.

  I've not updated iOS 10 to my model MD544AE/a mini iPad.

  why it is not so?

  Mini iPad 2 does not support IOS 10?

  It's an original iPad Mini, not a Mini 2 - the original Mini doesn't support iOS 10, it doesn't have the necessary equipment for him

  (I asked the hosts to remove the serial number of the title and after).

• WHAT YEAR MODEL MODEL MC976LL/A WAS CREATED

  WHAT YEAR MODEL MODEL MC976LL/A WAS CREATED

  2012.

  http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-I7-2.6-15-mid-2012-retina-display-specs.html

• based on the IMEI iPhone model

  Since I can't find the model number on the back of my iPhone, but I can locate my IMEI and ICCID numbers, is there a way I can determine what iPhone model I have?

  If you go to settings > general > about, there is a model number which are listed there. It is not the number on the back of the unit, it will give you information. Why can not locate the model at the back of your phone number? What version of the iPhone are you talking about?

  You can also take a look at this support document to help identify your version. Identify your iPhone - Apple Support model

• The intention to go for a Macbook Pro mid 2012 model with the Mavericks for video editing in FCPX... is this model for me: Apple Macbook Pro MD101HN/A laptop 13 inch (Core i5, 4 GB, 500 GB, Mac OS Mavericks / Intel HD Graphics), silver

  Hi all! A sale is on and I wonder if this model would help me to edit video in FCPX when I get out of the city. When at home, I use my iMac produce videos.

  Dr. Christophe

  FCPX requires macOS, 10.10... minimum.

• Air iPad models

  What is the difference between these models iPad air 1st generation:

  MD795KN/B and MD795GP/A

  Thank you.

  Hello. Have a look here identify your iPad - Apple Support model and see for yourself.