Similar Questions

• Another question of restarting the MUPS

  A former Church accountant called yesterday.  His computer has been restarted.  I went through a few things, starting with LNG, then passed over.  In safe mode, he did the usual list.  After MUPS.sys, it restarts.  I tried the Safe Mode (all 3), Normal, good last known (LKGC), etc.  I then tried the advanced options.  Debugging came with the BSOD with the 0 x 0... 7B (on forums I see it and 7th regularly, 7B) where it crashes.  I ran the diags BIOS & no problem.  I tried PE of Bart, WinPE with ERD Commander, TechMaster 2006, Hiren 9.5 with reboots or BSOD.  EBCD brought me for some things, but he had problems.  She has finally found its XP SP2 CD, so I tried to make in this, but it gets to the GUI (probably around MUPS.sys) and rebooted, including safe mode.  I found Hiran 9.7 (misguided in my folder of CD), & it worked, so I just ran a quick memtest and CPUZ, then let him test the HD (HDTest or HDTune or something like that).  As he ran, I brought to the top of the box CMD typed memtest and explained how to operate when HDTest was done.

  Today, after Church, I came back with a FD & performed a running MemTest + (4.1) one pass, now 6 SpinRite is testing the drive.

  The computer is a HP Pavilion with a 2.2 GHz Dual core Intel, 4 GB DDR2, 500 GB HD (about 25 GB used, a normal installation with another recovery - 15 or 20 GB partition as I remember) I could see with EBCD & Hiran) and a M/B IPIBL-LB.  She put it in a network with a new HP Pavilion (a1640n).  I don't know which box did its accounting data on it - or if the two don't.  (I has not implemented its network, I'm just helping low-cost when his computer gives its problems the weekend & his ordinary man will then come).

  Suggestions?

  Thank you

  John

  Hello

  This problem may occur in the following scenarios.

  ·        Boot sector virus

  ·        Device driver issues

  ·        Hardware problems

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned in the article below.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

   

  Method 2:

  I suggest you back up the data that are present on the system and then do a format Windows XP clean installation. To back up the data that is present on the system, install a parallel installation of Windows XP and then back up the data and then perform a new installation of Windows XP.

  Follow method 4 that is listed in the article given below to perform a parallel installation of Windows XP.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  Once you have made the parallel installation, and then follow the steps mentioned in the article below.

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Months ago, I created a free account but now the Church I work for a software how to install help it serial number?

  Months ago, I created a free account but now the Church I work for a software how to install help it serial number?

  What software you want to install?

  If it is old software that comes on a DVD, then install from the DVD and enter the serial number when prompted.

  Otherwise, you can download applications and install - this document provides more details. You can not require a serial number but must sign the software with an Adobe ID, which has the appropriate right.

• How to pass all Windows messages to my address to a new e-mail address so I can close the old account?

  1. We have established a new domain and an email account for our Church and need to transmit emails arriving at our old account/email address to our new e-mail address/account.  Searched the help files but no luck.
  2. We want to transfer contacts from the old email account to our new account.  Know that we can send a blast of e-mail contacts to inform them about our new address but there are always 10% and there are those who we wouldn't be in our list of Contacts who will not get the word about the change of address, so we would like to transmit the emails that arrive automatically to the following month until that we close the old account.  Is it possible or we have to recreate our Contacts list in our new account as soon as we receive emails?

  1. We have established a new domain and an email account for our Church and need to transmit emails arriving at our old account/email address to our new e-mail address/account.  Searched the help files but no luck.
  2. We want to transfer contacts from the old email account to our new account.  Know that we can send a blast of e-mail contacts to inform them about our new address but there are always 10% and there are those who we wouldn't be in our list of Contacts who will not get the word about the change of address, so we would like to transmit the emails that arrive automatically to the following month until that we close the old account.  Is it possible or we have to recreate our Contacts list in our new account as soon as we receive emails?

  Windows Mail can't do that if you create a message rule but WinMail must be open for the rule to work. The best advice I can offer is to ask your former e-mail server if they will send messages to you.

• Can I combine 3 accounts 1 Apple?

  I've made several purchases (apps, music, movies) from the iTunes store.  Unfortunately for me, until I realized it was a problem, I made the purchase of three different accounts.  I asked once before and I was told that it was impossible to combine accounts.  The situation has changed, or is there a reasonable workaround?

  If it proves impossible, maybe set up a family sharing and the other two ghosts that is your family.

• Admin account went

  Hello

  I have an iMac 27 inches and for the last week has had problems with everything works really slow. I bought the clean my Mac 3 software and it at the start of the performance. A few days later my computer on from without my help.

  When I turned on the computer back, I don't the option connect to my Admin account, although I could still see my background image was still there. The only option was to connect as a guest.

  I looked on the forums for help and her I made this following without result.

  Entered my Admin user name with password and it did not work. I then reinstalled Safari and nothing has changed. I looked again on the forums and tried to launch the Terminal and typed in 1 s/users and the response has been - command not found.

  All my programs are always present, but I still have no option to log in as administrator. I was going to update to OS X El Capitan version 10.11.6 Sierra, but without an Admin Im unable to do.

  Any help would be appreciated.

  See you soon

  I bought the clean my Mac 3 software...

  'Cleaning' apps are scams. Extract of effective defenses against software malware and other threats:

  • Never install a product that claims to 'clean up', 'speed', 'optimize', 'boost' or 'speed up' your Mac; to "wash", "tune" or to make it "brilliant". These allegations are absurd.
    • These products are marketed very aggressively. They are all scams.
    • They usually operate on the erroneous premise that Mac builds 'junk' that must be systematically 'cleaned' for optimum performance.
    • Trial versions of these programs are successful because they provide more instant gratification of free space on the disk.
    • This increased space is the result of irreversible destruction of files, programs or operating system components normally protected against accidental tampering or removal. The eventual result will be the reliable operation, poor performance and random crashes that may not become evident for months, or even years after their use, when updates of programs or OS X are finally released.
    • Memory "cleaners" that bypass the work of OS x memory management algorithms by purging the memory contents inactive for mass storage, which can only result in performance degradation and accelerated the hardware failure.

  To remove 3 CleanMyMac itself, use its Uninstall module, followed the following additional steps:

  • Delete the file ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

    • To access this file, copy and Paste the following line in the menu to go to Finder > go to folder...

  ~/Library/LaunchAgents/

  • Locate the following file and drag it to the Trash:

  com.macpaw.CleanMyMac3.Scheduler.plist

  • Then, open  (menu Apple) > System Preferences > users and groups > login items.
  • Select the item of Menu of CleanMyMac3
  • Click on the [-] (button less).
  • Restart your Mac.

  Beware that reinstall OS X has no effect on deletion CleanMyMac or reverse the damage, it is able to inflict on a system. To recover from the effects of using it to change the OS X / Sierra, you need additional software and essential files you need, follow the applicable recovery procedure below:

  • If you have a backup that you created before using CleanMyMac, now is the time to use it. For Time Machine, start macOS Recoveryand in the form of Mac OS X utilities , select restore from a Time Machine backup. Choose a date prior to the installation of CleanMyMac.
  • If you don't have a backup previous use of CleanMyMac, create one now. To do this read to use Time Machine to back up or restore your Mac.
    • The recovery procedure require that you erase the Mac using OS X Recovery, and then create a new user account whose content will be empty. You can then use Setup Assistant to migrate your essential documents, including photos, music, products of work and other essential files.
    • To erase and install OS X read How to reinstall Mac OS on your Mac.
      • Follow step 2 to completely erase the internal memory of the CMA: delete a volume using disk utility.
      • Then follow the procedure to move your content to a new Mac.
      • When asked how you want to transfer your data, select transfer from a Mac, Time Machine backup or boot disk.
      • Under Select the information to transfer, select only your old user account and do not select 'Applications', 'Computer and Network Settings' or 'other files and folders. Deselect these choices.
    • After using Setup Assistant, you will need to reinstall the essential software that you might need, once more without forgetting to install the software from their original sources and by omitting all non-essential software.
    • "Non-essential software" is a broad category that includes, but is not limited to the products 'antivirus' third party 'cleaning' and 'maintenance '.

• Best Macbook for Uni/accounting?

  Hi, I'm hoping to go to University the year next to study accounting and finance. Yesterday I bought the new gray Space 12 '' Macbook Online (without testing in-store), however I am now questioning if it was the right decision, as almost all the critics have said that the 13 "Macbook Pro than the Macbook at all levels (in addition to being more heavy/less portable). I'm 17 and I am not very well informed about the technological differences - but for now I don't seem to get on with the Macbook, it has a very small keyboard and it is almost too light so he could be comfortable on my lap, etc., but it must just be endured. If I work in the offices of accounting on investments as well as to take around Uni, what Macbook would be better for me?

  I'd appreciate really no help from any good Apple fans informed. Thank you!

  Probably not a Macbook at all, there is a shortage of good accounting software for Macs. A portable powerful Windows would be better and (b) cheaper.

• I can't do Activation, my real account and stop true bassword

  I can't do Activation, my real account and stop true bassword

  Someone was owner this iPhone before you bought it?  Lock activation request most likely their information.

  The former owner must unlock the iPhone, or it will be useless to you.

  Find my iPhone Activation Lock - Apple Support

• IMSG hacked account, sending a lot of international text in current bill

  So yesterday my pirate apple account (connected from a unknown macbook) and I noticed someone was frantically sends many messages from my phone, images which got also sent as normal text to an international number. After noticing, I quickly changed password. Checked my mobile BT phone bill, and he had already executed a bill for all these messages sent to international numbers. The appeal of BT until you see what they can do and they just said, you will have to pay for the Bill and that was that.

  What to do about this? my password was normally good security level and don't even know how he hacked. How would stop it doesn't happen because it looks just like any time I could just be landed with a massive Bill. Fortunately, I noticed pretty quickly this time, so the Bill does not accumulate to something that would be unfeasible. But with the telephone companies want to help at all, it seems extremely unfair!

  Try to use the two-step verification!

  Details here for Apple ID - Apple Support two-step verification

• He can't change the region of my account! Help, please! Thank you ~ ~ ~

  Hello

  I want to change my account area. But I still balance ($0.02) so I couldn't change. Please delete my balance.

  Thank you!

  and now I can not contact the Apple Support it's always show

  We're sorry.

  We are unable to respond to your request at this time. Please try again or come back later.

  1c14bb55-ED82-4B43-9c22-fc79914a022c

  is could someone please help me contact the apple support to clear my balance or help me another way to change the region on my account please!

  Thank you!!

• Cannot access netflix account on macbook

  I have an account with netflix via iTunes. I want to access it on my macbook. How can I do this?

  Have you tried to go directly to the site?

  http://www.Netflix.com/

• How can I report a hacked account to get my money back

  I was sent from iPhones that are not mine. think I was hacked, how do I report it and request a refund

  iTunes Store-what to do if your account has been compromised

• Messages does not connect to the Yahoo IM account?

  Messages app v9.2, currently works very well with my Google account and iMessage, also worked with my Yahoo Messenger account, but recently (today?) does not connect to it.

  I know that Yahoo has made changes to their Instant Messaging System. This change affected only Messages?

  Hello

  I can't connect either (I didn't realize that I do not use)

  However going on the Yahoo Site and change the password does nothing.

  With the help of their option 'insecure Apps' does nothing no more (there was an email saying I was using access to messaging through an unsafe application - but I have not used their messaging service for a very long time.)

  It does say read more suggests, is not Mail (after OS X 10.9 is OK)

  He does not on access to their e-mail service.

  There is no option in Messages to try to activate disable SSL you can with AIM or Jabber accounts

  I have looked in the help (a little) but still found nothing.

  

  20:49 Tuesday. October 4, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Someone tries to access my Apple account?

  I sang in my Apple ID on my mac, type in the verification code 2 step and everything was good, bit I disconnected. I went and looked at my iPhone and it had notification of two steps and asked if I wanted to allow. I clicked No. and changed my password because I was already burnt out on my mac. Someone tries to access my Apple account? little freaked out.

  No, it's ok.

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• Merge two e-mail accounts

  I have a few email addresses Yahoo and SBC Global, I'm able to check in a single mailbox on yahoo.com, while being able to select in each address when you compose an email.

  However, I'm unable to understand how to configure my Apple Mail account to reflect my yahoo.com account. Currently in Apple Mail, I have a separate account of the SBC Global and a separate account of Yahoo. I implemented this way because it was the only way I knew to be able to select different e-mail addresses when you are composing an email. The problem with this configuration is the number of unread emails is doubled due to them being two identical mailboxes.

  If possible, I would like to combine/merge the mailboxes while being able to have two e-mail addresses to select when you compose an email.

  I hope that what I am asking is logical and someone out there will be a solution because I know that I'm not the only person using several e-mail on the same Yahoo account alias.

  Thank you, in advance, for any help you are able to provide.

  Chris

  Hello and welcome to Apple support communities, OMMBoy.

  If I understand your post right, you are wanting to be able to set up your Yahoo/SBC Global account once in post, rather than implement them separately, but still be able to choose one or the other when you dial an outgoing message. I know from personal experience, how practical is to be able to choose the account that come from your emails, so I'm happy to help you find a solution for this today!

  It is not a way to 'merge' mail accounts in the mail that you mentioned, but hopefully that won't matter because it seems that these two accounts are already merged on the side server. That you would do so first remove one of these mail e-mail accounts so that only rest. It shouldn't make a difference, that you decide to keep. You can find steps on how to remove one of these email accounts in Mail for Mac: Configure Mail with your email accounts, specifically this section:
  
  

  Delete an account

  When you delete a mail e-mail account, messages from the account are deleted and are no longer available on your Mac. The copies of the messages remain on the mail server account and are still available (from webmail, for example).

  Important: If you are not sure if you want to keep the messages are still on the mail server, move or copy them to a mailbox stored on your Mac (the mailbox appears in the section on my Mac in the mail sidebar) before deleting the account in Mail.

  1. Choose Mail > Preferences, and click accounts.

  2. Select an account, then click on the button Delete .

     Note: If the account is used by other applications on your Mac, you are prompted to delete the account in Internet accounts system preferences. Click the button to open an Internet account, and then clear the box e-mail for the account. To stop using the account in all applications, make sure that the account is selected, and then click the button Delete .

  Once you have one of these e-mail accounts deleted, you will follow the steps of Mail (Yosemite): use e-mail alias, to add the address to remove as an alias. Don't worry that the article shows "Yosemite", the steps are the same for Sierra.

  Thank you for using communities of Apple Support.

  Take care.