Portege R600-101 connector 3 G SIM

Similar Questions

• Portege R600-101 connects to the WLan but not to the Draft N

  Hi friends...

  I have a Portege R600-101 which is capable of 802.11b/g/n.
  I have now, I tried 2 routers (belkin and Netgear DG834N) to get connected to the speed n machine but no joy... any help greatly appreciated...

  See you soon
  Warren

  Hello!

  Can you connect to the router with the b/g project?

  Maybe the router or laptop computers is not set to the project in order to check the settings in the router and wireless network card.
  In addition, you must disable security as hidden SSID, MAC address filtering and so distant features.

  Good bye

• Portege R600-101 - new hard drive internal

  Hello, is it possible to change the internal hard drive of the R600 (for a 500 GB or bigger)?

  Andreas

  What's your Portege comes with SSD or HARD disk?

• Portege R600 of fingerprint problem: error: could not open the specified database

  Hello

  I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
  I tried also on windows XP and Vista.

  Has anyone with the same problem or anyone suggesting a solution?

  I uninstalled the truesuite Access Manager but still the same problem.

  See you soon.

  Hello

  I noticed a new update for software fingerprinting for protected R600.
  Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
  Then reboot again.

  Download the fingerprint on the page of the European driver Toshiba Software and install again.

  Check it out!

• How do I know of Portege R600 wireless card?

  I have a Toshiba Portege R600-101 and would like to know what Wireless LAN card I have, to know what driver I need to download.

  Using Device Manager is not an option, because I reinstall windows and now it does not recognize the card. How can I see this?

  Hello

  I think you can use Device Manager to find out what is the WLan card.
  In-network cards > Device Manager, you can find the WLan card. Its should be listed as unknown device or Ethernet controller

  Mark it and go to properties.
  On the Details tab, you will find the DEV PCI ID and the VEN ID

  You can use this database to search for the vendor id and the device id.
  http://www.PCIDatabase.com/

• Portege R600-13Z - Toshiba utility SMS - slow / stop when the SIM is in!

  Hello

  Portege R600-13Z running XP Pro.

  Recently updated the firmware and the Wireless Manager to try to get 3g / GPRS comms to work at all. Updated worked a treat and have now great comms.

  Utility of SMS does not work too well if. Very, very slow or crashes.

  Wierdness: out the SIM card to use the phone to send a few texts and with the SIM on SMS utility works very well (!) starts, allows composition, everything except the real /sending/ of the text, which is of course not possible because the SIM card is somewhere else.

  Anyone encountered this problem, and is there a solution?

  Thank you very much

  Evan

  null

  > took out the SIM card to use the phone to send a few texts and with the card SIM SMS utility works great
  If you noticed delays in using DMD utility only with the inserted SIM card?

  Hmm I m not very well why this happens, but I know it s not recommended to insert the SIM card if the system is already running.
  You must shut down the laptop, must insert the SIM card and then you should power the device in place.
  Then you could test this once more.

• Portege R600: SIM inserted but error: "device not found".

  Hello

  Portege R600 under XP.
  Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".

  Cannot find the configuration options or anything like that in the manual.
  Can someone point me in the direction of literature?

  Thank you very much!

  Evan

  Hello

  Here you can download the latest version of 3G driver and tool:
  http://APS2.toshiba-tro.de/WLAN/?page=3gdownloads

  Here you will find a knowledge base on the topic of G 3:
  http://APS2.toshiba-tro.de/WLAN/?page=3ghowto

  and here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Hope this helps

• Portege R600: How can I activate the modem 3G without original modem minipci slot

  Hello everyone,

  I own a Portege R600 (10 s) for laptop and I often use mobile internet.

  The built-in modem Ericsson 3507 is buggy, always freeze (and who need reset) from time to time. No firmware update or driver makes it more stable.
  So, I bought another 3G mini-pci modem, a huawei EM770, to replace the original modem.

  The problem is that I can't use more of the Fn + F8 combination to power on the 3G modem.
  The modem huawei is well detected, installed, but no power (the blue led is off).

  The question is how can I turn on the connector of the modem 3G mini-pci, without the original E3507 modem?
  Thank you in advance for any lawyer.

  M.

  Toshiba Value added package and control RF Utility 3 G are related to the F3507g (and F3607gw) and will not work with integrated modules, not supported by Toshiba.
  There could be BIOS problems as well.

  What was the problem with your F3507g?
  Looks like it works for many people.
  Maybe you have a bad Apple?

• No Audio or USB ports with Port Replicator 3 and Portege R600

  I have a problem between my Port Replicator 3 (PA3681E-2PRP) and my Portege R600-13 X (Win7 Pro 32-bit). Everything has been working well for the past few months until a week ago. My PC has developed a problem then that plugged on the Port Replicator, it will not recognize something new that is connected to the USB (two PC & Replicator ones) ports, the Replicator audio output no longer works and the PC hangs during shutdown. Everything is OK with the PC when booted without the Replicator, but as soon as it is connected to the port replicator, in this case.

  I tried looking for information about this problem, but nothing helps... Any help to fix this would be greatly appreciated as it is to set up a business and I need it to work properly.

  A few things to try:

  Reinstall the Toshiba Value Added Package.
  Use system restore to restore Windows to a previous state.
  Check the connector for docking station for damage.
  Back up your data and perform the recovery.

  If its still does not, then I would send the laptop and the Port Replicator Port for an ASP for repair.

• Portege R600 - 12 H - touchpad, footprints digital, of mobile broadband questions

  Hi guys,.

  First of all, as a new user, I want to apologize if some of my difficulties have already explored in some other threads, although I searched and not found.

  I bought a Toshiba Portege R600 - 12 H with Windows 7 Professional.

  Currently I have 3 problems:

  -My touchpad moves the cursor without that nobody has pressed the button. By example, if I move the slider at the top of this text and start typing, in a few moments I'll be typing at the top of this text. Anyone have any ideas?

  -Because I'm having all questions of this pillow, I have a bluetooth mouse that works very well. I keep on disable the pad with e FN F9 work, but disable it, I am also disable the fingerprint sensor. When I try to log in with my fingerprints, nothing happens, and if I try to run the utility of fingerprinting toshiba, it displays a message saying: "it is not possible to connect the sensor.

  -Technology mobile broadband 3g toshiba does not. It recognizes the SIM card, but I am not able to make any type of connection to my ISP.

  Thank you for any assistance that you could bring about that.

  Hello

  Do you use Manager to connect 3g wireless or use other dashboard software? or a dial-up connection dircet?

• Portege R600 - white noise problem

  My Toshiba Portege R600-102 a constant white noise (as you can hear on http://bit.ly/7HaRfn), which becomes apparent when the computer is used with headphones or connected to a speaker.

  This happens with the latest audio drivers under Windows XP and Windows 7.

  The noise does not disappear when I turn off the microphone or disable the onboard sound of the Device Manager.

  In fact, when I connect the laptop to a PA system pro (Edirol UA-101 with Yamaha MSP5) via USB, I get the same noise from Yamaha! That tells me that there is probably a fundamental problem with the motherboard.

  Someone has a similar problem? Or ideas?

  Does this happen with and without mains?

• Portege R600 - Windows 7 switch backlight does not

  I have a new Portege R600, comes with Windows 7 32 bit and the switch on / off for the backlight does not work.
  I installed the new VFR package, until I uninstalled the old. Also the latest version of the Bios.

  Use the support Toshiba button and placed in the file backlight.exe, still does not work. If I tap the backlight.exe file manually, it works.
  It is not a problem of material, as told in the hard drive of my old R600 with XP Professional and works of button.

  What can I do?
  Toshiba support is not able to help, to talk about the new facility, but is the original unchanged.
  Maybe in the button holder, I put in an option in the empty file?

  > Switch on / off the backlight does not work.
  AFAIK some BIOS versions contains the additional option to enable and disable the lighting.
  Please check if the lighting is not disabled in the BIOS.

  I also searched this forum for some tips and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=127192

  Check it!

• Portege M300-101 - How to access the recovery partition?

  Hello

  I have a laptop Portege M300-101 model PPM30E-00G019SP
  I have problems and need to re install the original operating system.
  There is a 2.5 MB partition where the laptop recovery system.

  But I have no way to access it.
  In addition to the documentation that there is software to access this partition, but is not installed.

  Could someone guide me and help?
  Thank you
  Jorge

  Hello

  If I remember well, you can install WXP again using two different methods:
  -Restoration of created media recovery do you have created following the advice in the manuals?
  -Restoration of the drive HARD recovery on page 69 you can find detailed instructions how to proceed.

  You wrote: there is a program to access this partition but is not installed.
  What program do you mean exactly?

• Portege R600 - performance SSD limited by SATA 1.0

  Hello

  I have improved my Portege R600 - 13 X replace SSD HARD drive (Sandisk Ultra Plus / SATA 3.0)
  This laptop has the Intel® GS45 Express chipset supporting should SATA 2.0, but I can't reach 1.5 Gb/s transfer rate. I've updated everything as I could, including the BIOS - that does not show even any option that would for example switching between modes SATA...

  Is there anyone with a SSD R600 and get better results?
  I only failed to update the chipset installation ends with an error and suggests that there is something not quite right

  Hello

  Have you checked the BIOS for the SATA mode option settings?

  Some BIOS supports a SATA mode: AHCI and compatible.
  In case you want to use the SATA performance, you must use the AHCI parameter.

  AFAIK the external eSATA port supports the 300 MB/s and in the BIOS must be set to serial ATA (default) port4.

  The interface of the host load max 300 MB/s but sustained data read would be max 100 MB/s and 40 MB/s max sustained data write

• Portege R600 - issue of SSD upgrade

  I have a R600 10 q and I am interested to put an SSD in to replace aging / slow HDD have had a look at what others have said and there seems to be some compatibility issues.

  We know if these have been fixed with the new BIOS updates? or is there a list of compatible drives?
  Have a been a success with a particular model?

  Thanks for the help
  Tim

  I agree with Akuma.
  The use of SSD drive should not be a big problem.
  If something does not work, try to update the firmware of SSD drive for the last s.
  In most cases, this action has resolved most of the problems

  Since the Portege R600 supports a SATA controller, the SSD drive should support the same standard of controller.

  Good luck and thanks for sharing your experience after upgrading the SSD drive