circumvention of disapproval of length - Network.http.phishy.User - password?

Similar Questions

• about: Config, Network.Http.Pipelining won't stay after it has been changed.

  About: config, I changed network.http.pipelining false-> true. Then after restarting firefox, I'll go back to about: config and it came back to false. Any help would be appreciated. b

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Your list of details of the system shows that you have a user.js file in the profile folder to initialize prefs each time you start Firefox.

  The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
  You can check its contents with a text editor (right click: open with) If you do not create this file yourself.

  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• Network.http.Max - connections by-server not found in 27 FF

  Tried searching Network.http.Max - connections-per-server in the subject: config. This has been deleted?

  See:

  • http://Hg.Mozilla.org/Mozilla-Central/Rev/d3ba16c3c8a0 (Bug 770331)

• necessary to enhance Network.http.Max - connections-per-server to javascript

  I have an AJAX web application which is very sensitive the number of connections allowed by the browser. Bad things happen when the limit is set at the bottom: frozen screens, the uncommitted transactions, deadlocks, etc..

  To avoid this, I need to check the current value of the configuration parameter "Network.http.Max - connections-per-server" program (i.e. javascript code) and to reject a request if the limit is too low with the instructions appropriate for the user.

  I guess that's possible because "subject: config" restores all values of settings and even allows for user to change. However, the code-behind for the page is very complicated, so I can not understand how to accomplish my task. All I need is a function or a method returns the current value of a given configuration parameter.

  Any help will be greatly appreciated.

  Anatoly

  You do not have access to the pref the subject: config page via a Web site.
  
  In theory it is possible, but the user get a pop-up and must confirm each time.

  See also http://www.mozilla.org/projects/security/components/signed-scripts.html

• Validation/getting network HTTP request programmatically

  Hello

  I read here as well as networking documents the tried the httptest application example.

  Everything seems to work properly when the network request is called by the UI, manually.  for example, the user presses the 'Post!' button in the form of Post requests in the Http Test application example and class of Postmodele lights up and makes the Post request and returns the body of the response successfully.

  However, I want to do is invoke the same Post request, programmatically, for example when the application starts first, or perhaps in a timed/delayed thread.  What I did to test that is out is added the following code in the HttpSampleApp.cpp class at the end of the constructor:

  HttpSampleApp::HttpSampleApp()
  {
      ...
      ...
  
      std::cout << ">>>>> POSTING...." << std::endl;
      PostHttp post;
      post.post("");
  
  }
  

  I added some debugging messages in the PostHttp.post () and PostHttp.onGetReply ().  When I start the application, I can see that the HttpSampleApp() constructor calls the method PostHttp.post () very well, but the onGetReply() is never called!  It seems that the network HTTP POST request expected just somehwere and never completed / finishes.  I don't see mistakes or delays occurring - basically, nothing happens after you call PostHttp.post ().

  Can someone please shed some light on how to do it by PROGRAMMING Http POST and GET requests?  Again, the code works perfectly fine when it is called by manually, via the QML UI (as in the code example).

  Thanks for any help!

  The solution was to initialize the Postmodele as a reference pointer.

  for example

  PostHttp *post = new PostHttp();
  post->post("");
  

• Manage the NICs (network Card) by user (restrictions)

  Hello

  I'm reaching out to you guys since I am unable to find a way to do what I'm doing...

  I'm trying to set up a Windows 7 SP1 workstation on which there will be two users who have different network security:

  User 1 - No. access network or specify a network adapter that is not connected to a network

  2 - the user full network access

  Both users have their session open at the same time and network programs/services running in user 2's account at the same time that user 1's done things in his session that has no network...

  Here is what I checked:

  -Check if it was possible to have a firewall user rights (have not found a way) it seems that they apply by computer...

  -J' tried to adjust different parameters, once again, there is no me helped

  -J' tried to give specific user rights to disable the network adapter in the registry (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces). Unfortunately, it does not work. I can't delete a user rights, because I'm unable to take possession of the NIC :(  (Someone did it?)

  -Virtualization of user 1, user 2 session is not an option.

  You guys have an idea?

  Thank you! :)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• JO 8500: Scan to network - name of user and password files invalid without password.

  I use a 8500 Pro Wireless (A909g) on the Windows 7 computer.  I'm trying to set up the network scanning feature folder.

  Problem is this: I dno't having a Windows password set in place.  In this case, the printer cannot connect to my computer.  If I put a password on my PC and then change this password network settings analysis, then it can connect.

  I don't want to have a password on my PC and would like the printer to connect to it that way. I tried to delete the profile and add it again.  Still no luck.

  Any help?

  I solved it.

  Two things to check.

  (1) under the share Options Advanced (Network & Sharing Center--> homegroups and--> share options options advanced sharing...) -protected by password sharing must be OFF

  (2) for the file that you want to share and you scans registered to, do a right click, properties, security.  You must add 'NETWORK' as a user and ensure that its set of READ/WRITE.

  It fixed for me.

• Network.http.Accept - encoding maintains the reset and won't lock

  After gmail and a few other sites Google has stopped working, the fix was to open everything: config and change the above setting by default. This has worked, but whenever I have quit and re - open firefox, it goes back to the option "user set" rather than by default. I searched through subjects and found some on a parameter of locking or corrupt files but still it cannot fix.

  I created the files listed here:

  http://KB.mozillazine.org/Locking_preferences

  and put them in the correct areas, but they have nothing.

  I scoured the problems here:

  http://KB.mozillazine.org/Preferences_not_saved

  and impossible to find problems, as have configured read-only, which could cause the problem.

  I even tried the update to the beta version (from 13.0.1 14.0) and the problem persists.

  I tried to disable all the modules and setup my program of 'cleansing' to avoid Firefox, but * something * there is changing. Is there a user setting in the options of firefox that change which is leading it? A program that messes with it? Goes back to 13.0.0 fix it?

  I had the same problem, tried to lock the file prefs.js but that no longer works. In the same folder of prefs.js there a user.js that when I opened has a parameter that Firefox seems to use to override the default restart. Deleting the line solved the problem.

  For me, the record was [userprofile] / appdata/roaming/mozilla/firefox/profiles / [yourprofile]

• Not able to access the files of Windows 8 on a Windows XP-based computer on a network"requires a user name and password"

  I have a similar problem since an update of MS on a computer laptop XP and laptop W8.  Using a LAN cable, I can access the files from the XP laptop in the laptop W8 but suddenly not the other way around;  requiring a stranger Enter username and password .  MS is gradually becoming more and more hostile user!

  Separated from http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/how-can-i-disable-the-enter-network-password/5d9e2967-e946-4eb8-9173-e99de93af049

  Check this link and make sure that the settings are carried out in accordance with article.

  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Watch the video of thehttp://windows.microsoft.com/en-in/windows/networking-home-computers-running-different-windows#networking-home-computers-running-different-windows=windows-7 link

  Thanks Peinium Dicki ,
  I had to renew the password of guest on the XP computer account then the LAN has worked well.

• Regularly being expelled of the network despite other users are OK and internet works fine. Once launched, can join only if the router is restarted.

  Hi all

  I use a Packard Bell laptop and you connect via my PCI-E NIC Realtek RTL8192SE Wireless LAN 802.11n chip. As the title says, my network connection drops every hour 1-5 or so and once that he can't not reconnect until I have reset the router (superhub Virgin Media). It's obviously very disturbing other people in my house (we have more than 20 devices on the network). I tried to solve the problems and search but to no avail.
  List of problems and possible causes:
  -Sometimes after the reset of the router I and other members of the House will get a message saying: "Windows has detected an IP address conflict, please contact your network administrator." I presume that was the problem but I tried to use a static IP address out of the reach of all other devices and booking a lease on the router configuration that gave me the IP address I booked, but I was always began after a matter of a few hours.
  The event logs are shown in their order of appearance:
  Event ID: 8033

  Description:

  The browser has forced an election on network \Device\NetBT_Tcpip_{EE16D38E-6891-40EE-AC88-36E621199DF8} because a master browser was stopped.
  Event ID: 4199

  Description:

  The system detected an address conflict for IP address 0.0.0.0 with the system having the hardware address 00-00-00-00-00-00 network. Operation of the network on this system may be disrupted as a result.
  Event ID: 7042

  Description:

  The computer browser service has been successfully sent a stop command.

  The given reason was: 0 x 40030011 [OS: network connectivity (planned)]
  Event ID: 7036

  Description:

  The support TCP/IP NetBIOS service entered the stopped state.
  Generally, the problem seems to be the TCP/IP NetBIOS being stopped, but I changed all the power settings which would result in the browser of the computer stopping. Originally the error codes for the logoff were entirely event 4199 but some tweaking has stopped this error message displayed as often.  Sometimes the error code 4199 does not appear in the event logs when the connection is dropped, leading me to think that this is not like a problem. I could very well be wrong.

  Hello

  Check out this site
  http://www.EventID.NET/display.asp?a...s&EventID=8033

  The 8033 event don't would be not the cause of your connection dropped, but rather the result of it. I guess you lose your connection, the laptop is unable to contact the master browser, and if she chooses a new master browser (himself). For more information on how this works a check out Microsoft How Computer Browser Service Worksdocument.

  What are the events preceding the 8033? You have a 4202? Description is:

  The system detected that network adapter
  \DEVICE\TCPIP_{0E5CF2F9-A3AB-488E-997D-87C59FB17453}
  was disconnected from the network, and the
  adapter's network configuration has been
  released.
  
  

  Looks like you are using a wired and not wireless. When your connection drops, you lose your link light? If the link light is on, I'd want to reinstall the NIC driver or maybe reimage the laptop. If the link light is disabled, I would look on the side material more closely. Are laptops that work the same model?

  If you look at your diary of events, how many times do you have the 8033? It always happens at the same duration and/or frequency, or is it pretty random?

  This seems to be a strange conicidence with the ringing of the phone. It seems that events are the normal sequence in final display turned off power hibernation mode and "standby mode". It would still be nice to know where I can watch the codes as the Type of Source of Wake (3), partner attributes (82432) and error Code (0 x 40030011). I found a few sites that partly explain the codes, but not them.

  How to resolve conflicts of duplicate addresses media access control . This article explains the different methods by which you can follow to the bottom of the machine that is the origin of the conflict. Click here to see Microsoft Knowledge Base Article 164903 at http://support.microsoft.com/kb/164903.

  In addition, you can run in a situation where you notice that the conflict comes from a system where you have never changed the TCP/IP configuration. In this case, this problem appears randomly and disappears on its own. One of the possible reasons for this behavior could be corruption of ARP cache on the switch to which the two machines are connected. To avoid this problem in the future:
  1. Make sure that both systems have the latest version of the NETWORK card drivers and utility (if installed) Network Configuration.
  2. Make sure that the latest Firmware is on the switch. Check the switch for possible corruption of the ARP cache.

  To resolve this issue, you must determine which other computer on the network is using the same media access control address. Several tools shipped with the stack of Microsoft TCP/IP allows you to locate the computer address duplicate.

  To isolate the double media access control address, perform the following steps:

  Since a client TPC/IP based work:

  1. Ping the TCP/IP address is located in the registry entry from a command prompt by typing the following:
     PING 129.0.0.1

     You should get back responses similar to those of the duplicate addressed computer:

           Pinging 129.0.0.1 with 32 bytes of data:
     
           Reply from 129.0.0.1: bytes=32 time=10ms ttl=128
           Reply from 129.0.0.1: bytes=32 time=<10ms ttl=128
           Reply from 129.0.0.1: bytes=32 time=<10ms ttl=128
           Reply from 129.0.0.1: bytes=32 time=<10ms ttl=128
     

  2. To know the computer media access control address is the duplicate, type the following at the command prompt:
     ARP - a 129.0.0.1

     You should get a response back as follows:

           Internet Address  Physical Address
           129.0.0.1 02:A0:8C:DE:00:FD  <-- matches the event log entry
     

  3. We can now use NBTSTAT to get the NetBIOS (friendly) of duplicate computer name by typing the following at the command prompt:
     NBTSTAT-A 129.0.0.1

     You should get a response back with the NetBIOS name of the computer. This NetBIOS name to determine who is the owner of the computer so that you can locate it on your network.

        NAME             TYPE               STATUS
        -----------------------------------------------
        NTSERVER1           <00>                Unique
        DOMAN-NAME          <00>                GROUP
        NTSERVER1           <03>                Unique
     
        Media access control address = 02-A0-8C-DE-00-FD
     

     If you receive a message:

     HOST NOT FOUND.

     This seems to indicate that the computer to double is not an active NetBIOS computer as a server, Novell, Unix server, router or maybe a Jet Direct printer.

  4. When you have found the computer sent duplicate, you can replace the network card, or if a locally administered address (LAA) control media access, change it to be unique on the network.

  Changing a LAA can be accomplished as follows:

  1. In Control Panel, double-click the network icon.
  2. While viewing the properties of the network card installed, change the properties or the configuration of the UVG to network adapters installed to use a unique LAA.

• How can I set the "task Type" only "stick Print" on a network for all users printer?

  I have a user that is asking for the network on its soil set printer to have only 'hold Print' in the Type of task for all users.

  They then walk to the printer and print their ID card.

  Currently, it's just an option for all users are not using the printer this way.

  The request is to do it's mandatory. Stayed in the print server and the printer, entered the tab advanced, default print settings and attempted to define it here, but he doesn't know if he put it correctly for all users.

  Please notify.

  Hi Mark,

  I suggest you post this question in the TechNet Windows 7 networking forums: http://social.technet.microsoft.com/Forums/en-us/w7itpronetworking/threads

  Thank you.

• How can I use my time capsule as a hard drive on an existing network accessed through a password

  How can I use my time capsule as a hard drive on an existing network, storage, accessed through a password?

  We need more information in order to provide the right solution and Setup for you.

  You already have another router Apple... as an AirPort Extreme or Airport Express that provides the signal of your wireless network?

  If not, what is the serial number and model of your modem?

  Finally, what operating system is installed on the device you will use to install and configure the time Capsule? If it's a Mac and you're not sure what operating system it uses... click on the Apple icon in the upper left corner of the screen, then click on about this Mac, and post back with number of Version of OS X that you see there.

• Map network drive Auto Login password

  Windows XP mapped drive
  Auto login password when the computer is restarted is not correct and therefore prompts the user to enter.
  Self-opening worked before. Yesterday, the password for the server has been changed.
  I disconnected the old drive and created a new drive mapped with the new password and auto-connect on reboot option checked. Player features mapped correctly until the computer is restarted to indicate the user login box with the error message invalid username or password. Enter the password manually will connect the drive. It seems the automatic connection parameters have not last updated the new password and still uses the old password.
  (With disconnecting mapped drive, remap the process of training all our computers Windows XP I have this problem but our Windows computers 7/8 are all working correctly.)

  I found a solution to this.

  1 disconnect a mapped network drive.
  2. connect a network drive, but are not select Reconnect at startup.
  3. restart the computer. The mapped network drive is not there.
  4 map the network again drive. This time select Reconnect at startup.
  5 restart the computer. The mapped network drive will be there and activation it will automatically connect with the password.

• I changed the network settings of 'area' to the 'task force '. Now all (admin too) user passwords are not valid. How can I access my computer?

  Microsoft support suggested to reinstall the system, as the security policy does not allow to reset the admin password.
  From my point of view, their security policy is useless when you get out of HD and put in another machine. All the data is yours.
  My concern is to avoid the reinstalling all software as well as custom settings. Even if you saved all the files of configuration, it may still take some time.

  Hi Novina,

  Please see article about your question:

  http://support.Microsoft.com/kb/317049

  I hope this helps!

• Although my laptop (Vostro 3550) can connect to a remote server through VPN server will not recognize my user password and name. She will work to laptop to the network administrator, also under Win7

  I had many problems to connect to remote servers, only set by trial and error. I forgot how I solved the problem last time (a year ago), but because the server was, I can access is more data - I suspect that this is a basic setting preventing laptop computer to interact with the service.

  Hello

  Thanks for posting your query in Microsoft Community.

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro