Cisco ACS 5.2 and IOS XR

Similar Questions

• Cisco ACS 5.4 and VPN 3000

  Hello

  I'm trying to use CIsco ACS 5.4 for RADIUS authentication for VPN by using VPN concentrator 3000 users.

  I added the VPN 3000 on ACS and added GBA on VPN group with a shared secret authentication server. When I do a test on the authentication server using the local account that I created on ACS it happens as no response was received from the server so that I can see the RAIDUS AAuth in green.

  Any help would be much appreciated.

  Concerning

  AR

  Hey,.

  What is the report on GBA?

  "RAIDUS AAuth in green"

  If so, a pcap help between the two.

  Concerning

  Ed

• Cisco ACS 5.1 and RSA Authentication Manager 6.1

  Hi all

  We recently had a Cisco Secure ACS 1120 and I improved the Unit 5.1 5.0 with all your support

  Now, I need to integrate Cisco ACS 5.1 with RSA Authentication Manager 6.1. I have config file of RSA ACE Server successfully downloaded and exported to 1120 ACS.

  I also added as NetOS Agent ACS in the RSA server during the process, I found a few warnings. The ACE Server is not able to resolve the IP address to the name (is it necessary?).

  I have not created any file of secret key for communication between FAC and RSA and I used encryption is FOR.

  Now, when I log into ACS and search for devices in the identity store sequences I am not able to get Sever Token RSA.

  Let me know what was wrong, where can I fix and also please tell me what is the communciaction between the RSA and ACS?

  Hoping that you guys help me as usual when I'm in a hurry...

  Sree

  Were you able to successfully create the RSA identity server. After selecting the sdconf.rec and you press on submit what happened? The RSA instance created OK?

  If you go to

  Users and identity stores > external identity stores > RSA SecurID Token servers, what do you see in the list?

• Cisco ACS 3.1 and Logging of Nortel Passport CLI commands

  Good afternoon

  We try to log commands CLI Cisco ACS version 3.1 of Nortel Passport 8600. The version of the code that runs on the Passport does not support Ganymede +.

  Passports authenticate OK but don't sign any order information. I "think" the problem is maybe that the VSA Radius of Nortel for cli-commands-attribute, 195, is not collected by ACS.

  Does anyone know how I would go to get this added to the existing list of Radius (Nortel) VSA?

  Thank you very much

  Kind regards

  Flett.

  Foisy,

  You must add the attribute Nortel 193-195 to activate the posting of the order.

  Unfortunately you can't download on code 3.x, you will need to upgrade acs to the 4.x code.

  Kind regards

  ~ JG

  Note the useful messages

• Authentication PEAP with Cisco ACS 5.3 and Lotus Notes DB

  Hello

  I want to authenticate clients wireless against the name of user/passwords stored in a lotus notes database.

  Network: PEAP SSID-> Accesspoint-> controller-> ACS 5.3 WLAN 4404-> Notes DB

  Is this possible?

  I can connect to the attributes and ldap groups and query. but when I try to authenticate a user, I always get an error "object not found in the identity store.

  Bind test succeeds (> 100 groups and > 100 subjects.)

  EAP MSCHAP v2 is not taken in charge with LDAP by ACS

  You can use EAP GTC

  You should a begging utility that supports PEAP (EAP-GTC)

  such as ADU, Intel Proset, CSSC Cisco AnyConnect,... you can google for a list of applicants

  Open the new thread for cause of Apple

  ------------------------------------------------------------------

  Be sure to note the correct answers and report this thread as answered

• Cisco ACS 5.1 and ASA SSL VPN change or notify the expired password

  Hello

  Now, my ACS and ASA related to RADIUS (MSCHAPv2). I've set up password life on GBA and password management on SAA. But Cisco ASA did prompt change or whatever it is to notify when the user tries to log on with Clientless SSL VPN. Could you advice me everything to change, or notify the expired password?

  

  PS.

  I check change password on the first login of th on ACS this confirmation of the ASA to change password dialog box. But I want change or warn when the expired password

  Thank you

  The default password is marked as disabled after expiry

  I think that there is an improvement for this in the 5.2.0.26.2 patch and above, which includes the following:

  CSCtk32168: Add an option to change the password when the password expires (T + and Radius)

  After you install this hotfix, you get an option to the user authentication settings is:

  -Disable the user account

  -Expire the password

  When the expiration period is exceeded

  If password is expired then user will be asked to change password next authentication

  Note this latest patch for 5.2 is 5.2.0.26.4. All patches are cumulative

• Cisco ACS 4.0 and HTTPS

  New to ACS, is there a way to require (or even simply permit) https to access the administration web site?

  Thank you

  Tim

  Hello

  Yes there is:

  Administration control then the access policy. Check the box ' use HTTPS Transport for Admin Access.

  You need a good first server cert. The CERT management pages are Config system.

  Mounira

• Cisco ACS 5.2 with NX - OS (Nexus) devices user - questions

  Hey, I have a really strange problem with Cisco ACS 5.2 and Nexus NX - OS devices.

  I create an account on ACS, let's call him User1 and give privilege 15. With User1, I am able to access on all our IOS, IOS - XE, ASA and PIX devices with privilege 15.

  When I use the User1 account in our NEXUS devices, I do NOT receive the access privilege 15. As you probably know, the NEXUS devices have roles: predefined or custom roles. So I assumed I would get the role of "network-admin" (15 private read/write) User1 when you connect, but instead I got the role of 'vdc-operator' (private 1 read-only).

  Then I tried to twist User1 and give network-admin under profile Shell > Custom Attributes. I logged in the NEXUS and of course I was able to get a network-admin access. However, my access to ALL other devices (IOS, ASA, PIX, etc.) does NOT work! I am not even able to connect with my login and my password for these devices.

  Has anyone ever experience this problem? Help, please!

  Thank you

  neocec

  This is a common problem when you mix with RBAC and IOS devices authorization policies, the pair av that you created must be set 'optional' instead of 'compulsory', please make this change and you will be able to access all your devices.

  Thank you

  Tarik

• How can I use Cisco ACS to save Shell commands

  Hi guys, pleeeease how can I configure Cisco ACS to do command authorization on my Cisco 3660 router. I get the accounting logs and authentication but no newspaper that show orders issued by users - shell and it's the most important paper that I need. I read materails and download articles on the site of Cisco... but the thing is still does not give me the papers.

  I have these lines on my router:

  ...

  AAA authorization config-commands

  AAA authorization exec default group Ganymede +.

  AAA authorization commands 15 default authenticated if

  AAA authorization network default group Ganymede +.

  ...

  It's funny, when I turn on debugging of the authorization of the AAA on the router, it shows me every command being sent by the user on the debug log. But nothing shows under Administration TACAC + on the Cisco Secure ACS. What is responsible for this?

  *****************************************************

  I installed the trial version of the Cisco ACS 90 days and made all necessary settings and I have to say I like what I see already. I'm opening moves to recommend the product to purchase. Thank you guys, I got about the features of this ACS software through this forum, keep up the good work. I recommend the software for those who need to have adapted to the management reports Security Audit logs.

  If I understand what you're asking correctly, the answer is not in the authorization, that it is in accounting. I set up on my routers and send to ACS orders that level 15 privilege users enter on the router.

  orders accounting AAA 15 by default start-stop Ganymede group.

• RADIUS does not not on Cisco ACS SE v4.1 (1)

  Hello

  I have a CiscoSecure ACS version 4.1 (1) build 23.

  I can't configure the Cisco ACS for granular control of access router. I have a Netopia Router that is configured to use RADIUS to authenticate remotely for a telnet connection. The router sends the request to access the Cisco ACS SE RADIUS and a sniff on the side of the ACS shows the application of GBA, but I see no response from the ACS. RADIUS authentication to work with a Windows 2003 server.

  I configured an AAA client and a user of the ACS and use the default group. I use IETF RADIUS. Should what attributes I configure. In Windows, I use Service Type framed and Framed-Protocol PPP. This does not work with the Cisco ACS SE. Nothing shows up in the newspapers. It shouldn't be so difficult, but for some reason I can't make it work.

  Thanks for any help.

  Jutta Kullmann

  Jutta,

  Good to know it works very well. Please mark this thread as solved so other can benefit from.

  Kind regards

  ~ JG

• Cisco cisco ACS patch location site

  Hello

  I want to install cisco Acs 4.1 and I'm looking for the location on the Web site for patches can you please give the path?

  Thank you

  For ACS for windows:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-3DES

  For ACS SE:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-Soleng-3DES

  Kind regards

  Prem

• Cisco ACS 5.3 several AD domains

  Hello everyone

  I have a quick question about Cisco ACS 5.3 and multi domain authentication. How exactly is it treated?

  Can I join more than one field with the ACS server? Or do I still need to configure this two-way trust between forests AD relationship (even with GBA 5.3)?

  Thank you

  Markus

  Hello

  You can join only acs to a single domain. Here's a thread that will help you identify the confidence you will need to get this working.

  https://supportforums.Cisco.com/thread/2162234

  Thank you

  Tarik Admani

  Please evaluate the useful messages

  Sent by Cisco Support technique iPad App

• Problem with Cisco ACS and different areas

  Hello

  We are conducting currently a problem with Cisco ACS that we put in place, and I'll try to describe:

  We have ACS related directory AD areas, where we have 2 domains and appropriate group mappings.

  Then we have our Cisco switches with the following configuration,

  AAA new-model

  AAA-authentication failure message ^ CCCC

  Failled to authenticate!

  Please IT networks Contact Group for more information.

  ^ C

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local

  AAA authorization network default group Ganymede + local

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  !

  AAA - the id of the joint session

  But the problem is that with the users in a domain, we can authenticate, but not the other. Basically, the question is that when we check on the past of authentication, two authentications are passage and the display of 'Authentic OK', but on the side of the switch, there is a power failure.

  There may be something wrong with the ACS?

  Thank you

  Jorge

  Try increasing the timeout on IOS device using radius-server timeout 10.

  Do we not have journaling enabled on the ACS server remotely?

  -Philou

• Cisco ACS and the domain controller

  Hello

  We are currently using the Cisco ACS 3.2.3.11 solution engine and using a Windows domain as a remote agent controller.

  We now have the ACS to 4.1

  1. do I need to upgrade the remote agent on the domain controller as well?

  2. any computer on the network can be used as a Distribution Server?

  3. after an initial backup and upgrade then to 3.3.3.3 I make another backup before the upgrade to 4.1?

  You can use any PC in the network as a Distribution Server.

• Integration of Cisco ACS and Cisco NAC Manager - downloadable ACLs

  Hello

  I have Setup Cisco NAC in my environment. These are all works well. The users themselves will get authenticated via Cisco NAC Manager. The Cisco NAC Manager meets with Cisco ACS for the part of the user database. These are all works well. I would like to activate downloadable ACLs. I tried to use the CISCO-AV-PAIR method and creating a downloadable ACL entry in the shared components, but nothing works. It's either I'm doing wrong or this configuration of the mine does not support downloadable ACLs? Please advice kindly.

  Kind regards

  RAM

  + 6 012-2918870

  Hello

  It is not possible.

  You cannot push the ACL in the NAC manager.

  If you make the Radius of NAC authentication manager, you can do is create roles the NAC Manager, and on the roles you define traffic strategies.

  Using the Radius attributes you can then map users to roles.

  Please, take a look at this:

  http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_auth.html#wp1158789.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.