Problem with Cisco ACS and different areas

Similar Questions

• Problem with GANYMEDE + (ACS) and cat 2950

  I have configured the 2950 as below and properly configured ACS and I can connect to the 2950 using this configuration, the problem lies after that I go to enable and try any command, I get approval to next error command failed.

  What I missed out the config that will allow me to execute commands?

  AAA new-model

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local authenticated by FIS

  AAA authorization commands 15 default group Ganymede + authenticated if

  AAA authorization network default group Ganymede + local authenticated by FIS

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting network default start-stop Ganymede group.

  GANYMEDE server host ***. ***

  radius-server key 7 *.

  Thanks in advance.

  Jon

  Hi Jon,

  AAA of the switch seems ok, maybe you need to take a look at your ACS.

  Check the following information, where you have to apply it in your ACS config:

  http://www.Cisco.com/en/us/products/sw/secursw/ps5338/products_configuration_guide_chapter09186a00801fd6fc.html#wp676529

  Rgds,

  AK

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problems with my mouse, and have not been able to find a solution to the research on various forums.

  Original title: mouse problems

  I have problems with my mouse and have not been able to find a solution to the research on various forums. Here are the symptoms:

  1. you must click several times to get the menus to open. Sometimes they are not just and sometimes they open with a single click flash but do not stick until I clicked several times.

  2 several times the menu drop down and seem to become transparent (not in looks) because when I click on something on the menu, he actually selects everything that is behind the menu drop down. For example, if I'm in powerpoint and you select an item in edit mode, it might work and here again he can just select the slideview behind the menu and expand. Or well, if I'm on a Web site, such as Facebook, and I chose to close the session, rather than enable the disconnection of the key, he chooses some ad is behind the part of the menu and redirects the page of this Web site.

  3. when I try to select a Word, words or sections as paragraphs, it performs several different things: continually select as soon as I let go of the mouse button, the jumps of color selection in another part of the document, or deselects the part of the text before I even let go of the mouse button.

  Here is what I tried:

  1. I had originally a usb wireless mouse. I changed the batteries and then got a new. Now I use a wired mouse.

  2 make sure all updates for Windows and Office 2010 are updated.

  3 has tried to update the drivers mouse, says that it is up-to-date. He restored, did not work. Uninstalled and restarted.

  4 Ran Windows Security Essential and Malwarebytes - found nothing.

  5. ensure that all the Toshiba updates were up-to-date.

  I don't know how the word this issue properly in order to find information about it. Everything I typed in search engines brings me other problems unrelated to this one.

  I am running W7 64 x Home Premium SP1, SP2 MS 2010 with a mouse Dell; Toshiba Satellite C655

  Well I have stumbled on the fix... looks like there was a problem with the HID-compliant mouse. The convenience store hardware detected and solved the problem. Everything seems to work properly again.

• Integration of Cisco ACS and Cisco NAC Manager - downloadable ACLs

  Hello

  I have Setup Cisco NAC in my environment. These are all works well. The users themselves will get authenticated via Cisco NAC Manager. The Cisco NAC Manager meets with Cisco ACS for the part of the user database. These are all works well. I would like to activate downloadable ACLs. I tried to use the CISCO-AV-PAIR method and creating a downloadable ACL entry in the shared components, but nothing works. It's either I'm doing wrong or this configuration of the mine does not support downloadable ACLs? Please advice kindly.

  Kind regards

  RAM

  + 6 012-2918870

  Hello

  It is not possible.

  You cannot push the ACL in the NAC manager.

  If you make the Radius of NAC authentication manager, you can do is create roles the NAC Manager, and on the roles you define traffic strategies.

  Using the Radius attributes you can then map users to roles.

  Please, take a look at this:

  http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cam/m_auth.html#wp1158789.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

  Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
  When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

  whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

  any idea?

  Thank you

  Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
  Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Problems with Windows Update and load XP SP3

  I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data.  Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression.  I tried the MSRT and FixIt nothing helps.  I checked services.msc to see all the required services are enabled or started.  I read that some malware will be stop some services without notice.

  After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs.  My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads.  I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans.  Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details.  My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3.  I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:

  KB954550-v5

  KB932823-v3

  KB915800 v4

  KB884020

  KB926239

  KB2618444 (Windows IE8 security update)

  I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request.  I'd like some useful suggestions.  Thank you and happy new year!

  Thanks for the quick response.  I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007.  Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush.  Even for IE7 so I am not able to drop back to all recommend you.  I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions.  Stay tuned.

  It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.

• Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

  Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

  Ritu

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/279242

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Anyone having problems with Windows 7 and the HP LaserJet P2035n?

  It seems, after a few months of service, there are several problems with this printer and Windows 7 only.  We have several offices that use this printer and almost each one has similar problems.  It will printer randomly disappear, not being able to print anything at random times of the day, to the spooler crashing every two minutes or more.  There is no problem at all with Windows XP or Vista, only 7.  Reinsalling the printer driver takes care of the problem for a few days, but the questions up all over again.

  Hello

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the Technet forums below:

  TechNet forums

• I have installed Adobe Audition on my pc but I have a problem with the time and the effects of pitch appear unavailable

  I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not

  My guess is that you are in multitrack view and not editview

  These fx are destructive and only take effect when you change a single audio file in editview

• Problems with line spacing and text in Indesign 6 rate

  Hello everyone. I'm a graphic designer working with new magazine layout in Indesign. I used Quark for years and recently fell on this problem...

  In a paragraph, we usually use a soft return back some words to the next line. However, there are opportunities, I notice that in doing so the lines above where I am bumping the word ebb and Exchange. I've never had a problem with this before and it is a serious problem for us. Is it a setting I have on that I'm not aware? What can I do to avoid what is happening?

  Thank you for any input or advice.

  It is one of the main differences between Quark and ID.

  ID has a "paragraph composer" for will as a simple line like Quark composer, and it is enabled by default. When you use the paragraph composer, text is constantly analyzed and spacing adjusted for better form and appearance (according to the spacing algorithm and parameters of your justification) for the whole paragraph. If force you a line break, ID can adjust all the lines above as well as the following lines.

  If it is a 'serious problem' you shoud probably witch to the composer line simple. You will find a drop down for it in the dialog box of the definitin of paragraph under the parameters of the Justification style, or you can change individual paragraph as a local override from the steering wheel to control panel menu.

  Most of us who've been ID user for some time find the paragraph composer include the forces of the ID, and feel that it generates more nice looking text than a single-line composer.

• Problems with Office 2010 and Acrobat 8 Pro

  Good Day All;

  We are in the middle of upgrading Windows XP to Windows 7 with Office 2010 and I was wondering if there are problems with importing Office documents in Acrobat 8 Pro. I discovered that there is some problem with office 201 and designer of the life cycle.

  Any comments would be useful

  Concerning

  Chomp

  Acrobat 8 is not compatible with Microsoft Office 2010 and PDFMaker plugin is not installed. Only Acrobat X is compatible with Office 2010and at that time in 32-bit mode.

  Acrobat 8 is also not officially compatible with Windows 7, once again Acrobat X is the first version to include accreditation for this OS. It will still install, but Adobe cannot guarantee, it will work perfectly in all cases and does not provide any support for this combination installation.