Cisco ASA 8.4.1 address Destination NAT?
I have a situation where I have a deployed asa5505 8.4.1 running.
The customer has a mail server existing which is located on their local network and has Port configured NAT for normal mail ports, etc. 25,110,993,587.
It works very well for incoming mail and any jerky mail user off the external server or by visiting the webmail from outside the network.
However when the users within the LAN to connect through the ASA test back entering the IP address on the external Interface of the ASA, they are unable to do so.
I came up with the solution is split DNS. well does he rely on users not changing their dns servers.
I was wondering if it is possible to make a sort of NAT that rewritten traffic destined to the above ports on the external IP address to the internal LAN Ip instead.
This is probably a stupid question, but I couldn't find an answer may I use the terms wrong to get one.
In any case, I was hoping someone here could point me in the right direction.
Thank you
You can only configure DNS rewrite rewrite if you have static NAT 1 to 1, with static PAT as advised, rewriting DNS is not supported because with PAT static, it is potentially different internal IP mapping, so the DNS rewrite is not exactly at the right address.
Tags: Cisco Security
Similar Questions
-
Cisco ASA, connect an IP address on the OUTSIDE of the VPN remote access
Hello
I tried to find resources on the net but could not find a solution, then post it here. Maybe someone can help.
So the problem is that I'm trying to access a server on the cloud for remote VPN access (cisco asa 5510).
The server on the cloud (54.54.54.54) is only accessible from the outside interface (192.168.11.2) NY Firewall (cisco asa 5510)
I added some ACE for this in the ACL of VPN tunnel to divide.
NY-standard host allowed fw # access - list vpn_remote-customer 54.54.54.54
And I see the road added to my cliet machine after the VPN connection, but still it cannot connect to this server.
The network INTERIOR, I can connect to the server.
Thanks in advance.
Hello
This is most likely a problem with NAT hair/U-turn hairpin.
Will need to see the configurations or you would need to check yourself
I don't know what your version of the Software ASA is to be like who determines what is the format of NAT configuration.
So far, you have confirmed that the ASA VPN configuration provides the VPN Client with the route to the remote server. Then in circulation should be tunnel to the ASA.
Then, you will need to check the output of this command
See the race same-security-traffic
You should see the command in the output below
permit same-security-traffic intra-interface
If you do not, you will need to add it. This effect of controls is to allow traffic to enter an interface and exit through the same interface. In your case this applies to Internet VPN Client traffic to the remote server as it between ' outside ' and spell through the 'outside'.
Then, should ensure that dynamic PAT is configured for the VPN Clients.
8.2 software (and below)
You most likely have a dynamic configuration PAT like that on the firewall, if levels of above running software version
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
In this situation if we wanted to add dynamic PAT for a pool of VPN, we would add
NAT (outside) 1
This would allow users to use the same public IP address as LAN users, when accessing the remote VPN server
Software 8.3 (and above)
Because the NAT configuration format is completely different in the latest software, you could probably just add a new configuration of NAT completely without adding a
network of the VPN-PAT object
subnet
dynamic NAT interface (outdoors, outdoor)
Of course, its possible that there could be some configuration NAT already on the device which could cause problems for this configuration. If this does not work then that we would have to look at the actual configurations on the ASA.
Hope this helps
Let me know how it goes
-Jouni
-
Cisco ASA VPN Site to Site WITH NAT inside
Hello!
I have 2 ASA 5505 related to IPSEC Tunnel VPN Site to Site.
A 192.168.1.0/24 'remotely' inside the network and a local "192.168.200.0/24' inside the network (you can see the diagram)
The local host have 192.168.200.254 as default gateway.
I can't add static route to all army and I can't add static route to 192.168.200.254.
NAT the VPN entering as 192.168.200.1 or a 192.168.200.x free to connect my host correcly?
If my host sends packet to exit to the default gateway.
Thank you for your support
Best regards
Marco
The configuration must be applied on the SAA with the 192.168.200.0 subnet it is inside, there must be something like this:
permit 192.168.1.0 ip access list VPN_NAT 255.255.255.0 192.168.200.0 255.255.255.0
NAT (outside) X VPN_NAT outside access list
Global (inside) X Y.Y.Y.Y (where the Y.Y.Y.Y) is the ip address
If you have other traffic on the vpn through the tunnel that requires no nat, then you must add external nat exemption rules since these lines above obliges all traffic through the asa to have a nat statement.
See if it works for you, else post your config nat here.
-
Cisco Asa vpn site-to-site with nat
Hi all
I need help
I want to make a site from the site with nat vpn
Site A = 10.0.0.0/24
Site B = 10.1.252.0/24I want when site A to site B, either by ip 172.26.0.0/24
Here is my configuration
inside_nat_outbound to access ip 10.0.0.0 scope list allow 255.255.255.0 10.1.252.0 255.255.255.0
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared-key!ISAKMP retry threshold 10 keepalive 2
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
card crypto outside_map 2 match address inside_nat_outboundcard crypto outside_map 2 pfs set group5
card crypto outside_map 2 peers set x.x.x.xcard crypto outside_map 2 game of transformation-ESP-AES-256-SHA
NAT (inside) 10 inside_nat_outbound
Global 172.26.0.1 - 172.26.0.254 10 (outside)
but do not work.
Can you help me?
Concerning
Frédéric
You must ensure that there is no NAT 0 ACL statement because it will take precedence over the static NAT.
You don't need:
Global 172.26.0.1 - 172.26.0.254 10 (outside)
NAT (inside) 10 access-list nattoyr
Because it will be replaced by the static NAT.
In a Word is enough:
nattoyr to access ip 10.0.0.0 scope list allow 255.255.255.0 10.1.252.0 255.255.255.0
access extensive list ip 172.26.0.0 vpntoyr allow 255.255.255.0 10.1.252.0 255.255.255.0
public static 172.26.0.0 (inside, outside) - nattoyr access list
card crypto outside_map 2 match address vpntoyr
card crypto outside_map 2 pfs set group5
card crypto outside_map 2 defined peer "public ip".
card crypto outside_map 2 game of transformation-ESP-AES-256-SHA
outside_map interface card crypto outside
tunnel-group "public ip" type ipsec-l2l
tunnel-group "public ip" ipsec-attributes
pre-shared key *.
-Make sure that it not there no NAT ACL 0 including the above statements and check if NAT happening (sh xlate) and the
traffic is being encryption (sh cry ips its)
Federico.
-
Cisco ASA active / standby Mac addresses
Hi all
Please advise on the underside.
Say that I have to active / standby. I have two interfaces on each firewall configured as below
For the primary (active)
interface GigabitEthernet1 / 0--> Say burned in mac address is 6c41.6bb0.1111
nameif test1
security-level 0
10.1.1.1 IP address 255.255.255.0 ensures 10.1.1.2im int 2/0
Test2 nameif--> Say burned in mac address is 6c41.6aa0.1111
security-level 0
10.2.1.1 IP address 255.255.255.0 ensures 10.2.1.2For secondary school (currently idle)
interface GigabitEthernet1 / 0--> Say burned in mac address is 6c41.6bb0.2222
nameif test1
security-level 0
10.1.1.1 IP address 255.255.255.0 ensures 10.1.1.2im int 2/0
Test2 nameif--> Say burned in mac address is 6c41.6aa0.2222
security-level 0
10.2.1.1 IP address 255.255.255.0 ensures 10.2.1.2According to my understanding of the DOC.
To transfer traffic, other devices will use the main unit mac address and IP addresses.
Please consider under the scenario:
My primary unit has failed and secondary took over as active unit.
Primary (standby)
Secondary (active)
secondary Q1) so now will use the IP address and Mac address as below? Please confirm
10.1.1.1 & 6c41.6bb0.1111
10.2.1.1 & 6c41.6aa0.1111
Q2) I believe that the ip address of the primary (Standby) in aid will be
10.1.1.2
10.2.1.2
It will use what mac addresses? What is the BIA of the secondary unit? Please notify
Thanks in advance.
Q1 Yes), IP address and the MAC will be moving to the new active unit so no matter who the network except the switch will notice failover event
Q2) Yes, primary (watch now) will use IP addresses and MAC addresses available for secondary:
6C41.6bb0.2222
6C41.6aa0.2222
Kind regards.
-
Hello
I have a question on a Cisco ASA.
We strive to set up a VPN connection with a provider of our using the 172.16.1.0/24 subnet now that they already have another customer using 172.16.1.0/24, then NAT traffic on a different subnet before connecting to the provider. Is this possible? If yes how can I configure something like this?
172.16.1.0/24 is also used to access the internet.
That's what I have right now:
!
internet_cryptomap_2 to access ip 192.168.0.0 scope list allow 255.255.252.0 (subnet provider)
!
card crypto internet_map1 3 match address internet_cryptomap_2
internet_map1 crypto map peer set 3 (IP address of provider)
internet_map1 crypto map 3 the value transform-set tubis-transformset
internet_map1 crypto map 3 the value reverse-road
!
This VPN works, but only for the subnet listed in the cryptomap_2 unfortunately, I can't use 172.16.1.0/24 for this.
Anyone has any ideas how to solve this problem?
Kind regards
Tom
Yes, you can...
Assuming you want to 172.16.1.0/24 NAT to 10.16.1.0/24 when accessing the provider subnet 192.168.0.0
access list static-nat-to-vendor permit ip 172.16.1.0 255.255.255.0 192.168.0.0 255.255.252.0
public static 10.16.1.0 (inside, outside) access static-nat-to-provider list
access extensive list ip 10.16.1.0 internet_cryptomap_2 allow 255.255.255.0 192.168.0.0 255.255.252.0
Assuming you have ASA 8.2 or lower.
Otherwise, ASA 8.3 or higher:
network object obj - 172.16.1.0
subnet 172.16.1.0 255.255.255.0
network object obj - 10.16.1.0
10.16.1.0 subnet 255.255.255.0
network object obj - 192.168.0.0
Subnet 192.168.0.0 255.255.252.0
NAT (inside, outside) source static obj - 172.16.1.0 obj - 10.16.1.0 destination static obj - 192.168.0.0 obj - 192.168.0.0
-
Order of operations NAT on Site to Site VPN Cisco ASA
Hello
I have a question about the order of operations NAT on Site to Site VPN Cisco ASA 8.2.x. I have a scenario where the internal IP address of the range 10.17.128.x are NATTED IP public 31.10.10.x. below is the config:
Tunnel normally passes traffic to dmz - 31.10.11.10, 31.10.11.11 servers.
But the servers NATTED (10.17.128.x <->31.10.10.x) does not work.
inside_map crypto 50 card value transform-set ESP-3DES-SHA
tunnel-group 100.1.1.1 type ipsec-l2l
tunnel-group 100.1.1.1 General-attributes
Group Policy - by default-PHX_HK
IPSec-attributes tunnel-group 100.1.1.1
pre-shared key *.
internal PHX_HK group policy
PHX_HK group policy attributes
VPN-filter no
Protocol-tunnel-VPN IPSec svc webvpn
card crypto inside_map 50 match address outside_cryptomap_50
peer set card crypto inside_map 50 100.1.1.1
inside_map crypto 50 card value transform-set ESP-3DES-SHA
inside_map crypto 50 card value reverse-road
the PHX_Local object-group network
host of the object-Network 31.10.11.10
host of the object-Network 31.10.11.11
host of the object-Network 31.10.10.10
host of the object-Network 31.10.10.11
host of the object-Network 31.10.10.12
host of the object-Network 31.10.10.13
host of the object-Network 10.17.128.20
host of the object-Network 10.17.128.21
host of the object-Network 10.17.128.22
host of the object-Network 10.17.128.23
the HK_Remote object-group network
host of the object-Network 102.1.1.10
inside_nat0_outbound list extended access permitted ip object-group PHX_Local-group of objects HK_Remote
ACL_INSIDE list extended access permitted ip object-group PHX_Local-group of objects HK_Remote
ACL_OUTSIDE list extended access permitted ip object-group HK_Remote-group of objects PHX_Local
outside_cryptomap_50 list extended access permitted ip object-group PHX_Local-group of objects HK_Remote
Route outside 102.1.1.10 255.255.255.255 30.1.1.1 1
public static 31.10.10.10 (Interior, exterior) 10.17.128.20 netmask 255.255.255.255
public static 31.10.10.11 (Interior, exterior) 10.17.128.21 netmask 255.255.255.255
public static 31.10.10.12 (Interior, exterior) 10.17.128.22 netmask 255.255.255.255
public static 31.10.10.13 (Interior, exterior) 10.17.128.23 netmask 255.255.255.255
He started to work when I did another group of object by name PHX_Local1 and added to the list of access inside_nat0_outbound, instead of the object group PHX_Local, as below:
the PHX_Local1 object-group network
host of the object-Network 31.10.10.10
host of the object-Network 31.10.10.11
host of the object-Network 31.10.10.12
host of the object-Network 31.10.10.13
No inside_nat0_outbound access list extended only to allowed ip object-group PHX_Local-group of objects HK_Remote
inside_nat0_outbound list extended access permitted ip object-group PHX_Local1-group of objects HK_Remote
Can you please help me understand why group object PHX_Local failed with access-list inside_nat0_outbound, but he began to work with the Group of objects PHX_Local1.
Also, if you could tell me the order of operations to NAT via VPN Site to Site, it would be useful.
Thank you
Kind regards
Thomas
Hello
I think you could have said the original question in a way that could be missleading. In other words, if I understand now.
From what I understand now, you have the DMZ set up the server that are measured with a public IP address on the real servers. And for those that you have configured NAT0.
Then you have other servers that do not have public IP addresses themselves, but they are translated on the SAA.
If this is the case, then the next question would be. The server with the NAT should attend the L2L VPN connection with their real IP or address IP NAT.
Of course if you configure static NAT for the same servers and NAT0 the NAT0 will always win.
You have these guests who were not able to use the VPN L2L
31.10.10.10 10.17.128.20
31.10.10.11 10.17.128.21
31.10.10.12 10.17.128.22
31.10.10.13 10.17.128.23
IF you want them to go to the VPN L2L with their original IP address then you must configure
object-group, LAN->
host of the object-Network 10.17.128.20
host of the object-Network 10.17.128.21
host of the object-Network 10.17.128.22
host of the object-Network 10.17.128.23
object-group, REMOTE network
host of the object-Network 102.1.1.10
inside_nat0_outbound list extended access allowed ip-group of objects LOCAL object-group remote
outside_cryptomap_50 list extended access allowed ip-group of objects LOCAL object-group remote
IF you want to use the L2L VPN with the public IP address, then you must configure
object-group, LAN
host of the object-Network 31.10.10.10
host of the object-Network 31.10.10.11
host of the object-Network 31.10.10.12
host of the object-Network 31.10.10.13
object-group, REMOTE network
host of the object-Network 102.1.1.10
outside_cryptomap_50 list extended access allowed ip-group of objects LOCAL object-group remote
EDIT: in this case you naturally do not configure any NAT0 for actual IP addresses we want precisely the IP addresses to be visible to the L2L VPN with the IP NAT address.
Or you can of course use the same "object-group" as currently but change the content in an appropriate manner
Be sure to mark it as answered if it was answered.
Ask more if necessary
-Jouni
-
Static ip address linking to remote Cisco ASA vpn users
Hai, is possible to way static ip binding for users of customer remote cisco ASA of the dhcp pool that we create for users of vpn? / Please let me know your suggestions if possible. !!!
That can be done with DHCP. But your authentication server can do. If authenticate you local on the SAA, and then specify the IP address in the attributes of the user, if you are authenticating with RADIUS, you can send the "Box-IP-Address" attribute to assign the address.
-
Cisco ASA cannot create several tunnels at the same address in hand?
We have several remote sites with Linksys WRVS4400N and Smoothwall firewall/vpn devices. I need these sites to be able to connect to several tell-contiguous subnets to our main office. This was done easily with smoothwall and linksys. You create a separate tunnel for each subnet, and voila, you're done. However, when I tried this with our ASA newly installed, it won't let me create several tunnels at the same address of the remote peer. It is a problem because these sites have only a single IP address public static. Did I miss something or ASA not allow connections to and from multiple subnets form a site with a unique address peer?
Resembles the limitation on the WRVS4400N as Cisco ASA supports several subnets by tunnel.
Is there anyway that you can configure a subnet more instead of specific subnets on the ACL?
For example:
If you 192.168.0.0/24 and 192.168.1.0/24, instead of having 2 subnets configured, you can combine them into 1 subnet 192.168.0.0/23
-
Cisco ASA 5510, ipsec vpn. What address to connect the client to
Hello
It's maybe a stupid question, but I can't find the answer anywhere.
I used the ipsec vpn configuration wizard, I activated the external interface to access ipsec and went through SCW pools of addresses etc. When I try to connect with the cisco vpn client to my address of the external interface (of a remote host) I'm unable to connect. I scanned the interface for open ports, but there is not, I have to allow traffic to ipsec at this interface?
Best regards
Andreas
No, once you have configured the access remote vpn ipsec, it will be automatically activated, and you should be able to connect to the ASA outside the ip address of the interface.
Can you please share the configuration? and also which group name you are trying to access the vpn client?
-
Issue of Cisco ASA 5505 Anyconnect Client NAT'ing
Hello
We have a split_tunnel RA Vpn configuration in a branch that works very well in all areas except the destinged of traffic for a specific website using https. This provider does not allow HTTPS connections to bring some outside IP addresses.
Essentially, this should work like this:
RAVPN_client (10.4.4.0/27)--> https request to the (208.x.x.x) vendor_ip---> ASA55XX--> NAT_to_outside_ip--> to the vendor_ip (208.x.x.x) https request
I need to understand how you would approach from ONLY this https traffic specific to the RA VPN without having to change the installer otherwise.
Internal hosts (aka behind the ASA physically) have not any question at this site, as would his nat ip address outside that we expect.
Here is what we use for the NAT Exemption it list 10.2.2.x, 192.168.100.x, and 172.23.2.x are other remote sites we have. The 10.4.4.0/27 RA VPN users don't have no problems connecting to them, regardless of the Protocol:
Note to inside_nat0_outbound access-list of things that should not be Nat would
access extensive list ip 10.12.1.0 inside_nat0_outbound allow 255.255.255.0 10.2.2.0 255.255.255.0
access extensive list ip 10.12.1.0 inside_nat0_outbound allow 255.255.255.0 192.168.100.0 255.255.255.0
access extensive list ip 10.12.1.0 inside_nat0_outbound allow 255.255.255.0 172.23.2.0 255.255.255.0
access extensive list ip 10.12.1.0 inside_nat0_outbound allow 255.255.255.0 10.4.4.0 255.255.255.224
access extensive list ip 10.4.4.0 inside_nat0_outbound allow 255.255.255.224 192.168.100.0 255.255.255.0
access extensive list ip 10.4.4.0 inside_nat0_outbound allow 255.255.255.224 10.2.2.0 255.255.255.0
access extensive list ip 10.4.4.0 inside_nat0_outbound allow 255.255.255.224 172.23.2.0 255.255.255.192
Here is the list of interesting traffic that we push to the customers through the tunnel of the VPN connection.
VPN_splitunnel to access extended list ip 192.168.100.0 allow 255.255.255.0 any
VPN_splitunnel of access list scope 10.2.2.0 ip allow 255.255.255.0 any
Access extensive list ip 10.12.1.0 VPN_splitunnel allow 255.255.255.0 any
Access extensive list ip 172.23.2.0 VPN_splitunnel allow 255.255.255.192 all
Access extensive list ip 10.4.4.0 VPN_splitunnel allow 255.255.255.224 all
VPN_splitunnel list extended access permit ip host 208.x.x.x any newspaper<- this="" is="" the="" vendors="" external="" ip="" address="" (obfuscated="" for="" security="" but="" you="" get="" the="">->
Here's the rest of the nat configuration:
NAT-control
Overall 101 (external) interface
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 101 0.0.0.0 0.0.0.0
Configuring VPN RA:
IP mask 255.255.255.224 local pool VPNPool 10.4.4.5 - 10.4.4.30
WebVPN
allow outside
AnyConnect essentials
SVC disk0:/anyconnect-dart-win-2.5.0217-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.5.2001-k9.pkg.zip 2 image
enable SVC
tunnel-group-list activate
internal RAVPN group policy
RAVPN group policy attributes
value no unauthorized access to banner
value of banner that all connections and controls are saved
banner of value this system is the property of MYCOMPANY
banner value disconnect IMMEDIATELY if you are not an authorized user.
value of server WINS 10.12.1.11 10.2.2.11
value of 10.12.1.11 DNS server 10.2.2.11
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_splitunnel
type tunnel-group RAVPN remote access
attributes global-tunnel-group RAVPN
address pool VPNPool
authentication-server-group NHCGRPAD
Group Policy - by default-RAVPN
tunnel-group RAVPN webvpn-attributes
enable RAVPN group-alias
Can someone ' a Please direct me as to what I'm doing wrong? I was assuming that since I don't have Ip 208.x.x.x address in the list of inside_nat0_outbound that it would be NAT had, but appears not to be the case (out of packet - trace below)
Packet-trace entry outside tcp 10.4.4.6 34567 208.x.x.x detailed https
*****************************************************************************
Phase: 1
Type:-ROUTE SEARCH
Subtype: entry
Result: ALLOW
Config:
Additional information:
in 0.0.0.0 0.0.0.0 outdoors
Phase: 2
Type: ACCESS-LIST
Subtype: Journal
Result: ALLOW
Config:
Access-group outside_access_in in interface outside
outside_access_in list extended access permitted ip VPN_ips 255.255.255.224 host 208.x.x.x Journal
Additional information:
Direct flow from returns search rule:
ID = 0xd7bd3b20, priority = 12, area = allowed, deny = false
Hits = 2, user_data is 0xd613bf80, cs_id = 0 x 0, flags = 0 x 0 = 0 protocol
SRC ip = VPN_ips, mask is 255.255.255.224, port = 0
IP = 208.x.x.x DST, mask = 255.255.255.255, port = 0, dscp = 0 x 0
Phase: 3
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:
Direct flow from returns search rule:
ID = 0xd7df8fa0, priority = 0, sector = inspect-ip-options, deny = true
hits = 2256686, user_data = 0 x 0, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =
DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0
Phase: 4
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional information:
Direct flow from returns search rule:
ID = 0xd87c8fc8, priority = 12, area = ipsec-tunnel-flow, deny = true
hits = 550, user_data = 0 x 0, cs_id = 0 x 0, flags = 0 x 0 = 0 protocol
SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =
DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0
Phase: 5
Type: HOST-LIMIT
Subtype:
Result: ALLOW
Config:
Additional information:
Direct flow from returns search rule:
ID = 0xd7dfbd28, priority = 0, domain = host-limit, deny = false
hits = 1194, user_data = 0 x 0, cs_id = 0 x 0, flags = 0 x 0 = 0 protocol
SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =
DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0
Phase: 6
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:
Reverse flow from returns search rule:
ID = 0xd7df8fa0, priority = 0, sector = inspect-ip-options, deny = true
hits = 2256688, user_data = 0 x 0, cs_id = 0 x 0, reverse, flags = 0 x 0 = 0 protocol
SRC ip = 0.0.0.0 mask 0.0.0.0, port = 0 =
DST ip = 0.0.0.0 mask = 0.0.0.0, port = 0, dscp = 0 x 0
Phase: 7
Type: CREATING STREAMS
Subtype:
Result: ALLOW
Config:
Additional information:
New workflow created with the 2380213 id, package sent to the next module
Information module for forward flow...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_tcp_normalizer
snp_fp_translate
snp_fp_adjacency
snp_fp_fragment
snp_ifc_stat
Information for reverse flow...
snp_fp_tracer_drop
snp_fp_inspect_ip_options
snp_fp_translate
snp_fp_tcp_normalizer
snp_fp_adjacency
snp_fp_fragment
snp_ifc_stat
Result:
input interface: outdoors
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: allow
*****************************************************************************
Thank you
Jason
You are on the right track with you divided the tunnel configuration. You need to add is the pool of Client VPN to be coordinated to your external ip address, IE: same as your local users of the ASA when he tries to access the intellectual property of the provider (208.x.x.x), allowing more traffic in and out of the same interface for traffic of U-turn.
Here's what you need to set up:
permit same-security-traffic intra-interface
nat-to-vendor ip 10.4.4.0 access list permit 255.255.255.224 host 208.x.x.x
NAT (outside) 101-list of nat-to-vendor access
The foregoing will allow VPN pool to be coordinated to your ASA outside the ip address of the interface when accessing the seller (208.x.x.x).
1 small correction to your ACL split tunnel:
-The following line is incorrect and should be deleted in the tunnel of split ACL:
Access extensive list ip 10.4.4.0 VPN_splitunnel allow 255.255.255.224 all
(As 10.4.4.0/27 is your pool of Client VPN, you do not add these subnet to your list of split tunnel. List of Split tunnel are only the network that you are difficult to access and sent through your VPN tunnel).
Hope that helps.
-
Exempt NAT and in cisco ASA intervlan routing scenario
Hi, I'm new to Cisco ASA. I did some study on Cisco ASA recently and you try to understand how it works.
The chart above illustrates the architecture of network in my company (attachment). The two FW (5520, version 8.0) are configured with nat control and same-security-traffic permit inter-interface. I have a ping of device A to unit B (10.10.105.244 > 10.10.70.70/24).
At FW 02, I added an inbound ACL (10.10.105.0/24 > 10.10.70.0/24) because of the difference in level of security between the input and output interface (SL 50 < sl="" 100).="" for="" the="" return="" traffic="" (10.10.70.0/24=""> 10.10.105.0/24), I only need to add a device nat exempted from the rules as I have it configured with permit same-security-traffic inter-interface. My understanding is correct?
FW 01, I need to add an entry ACL (10.10.70.0/24 > 10.10.105.244). Without the rule, my ping will be unsuccessful. Can I know why I need to add this rule to incoming traffic, because same-security-traffic permits inter-interface is set to FW 01? Can I know why I have no need to nat exempt traffic (10.10.105.0/24 > 10.10.70.0/24)?
Sorry for the long explanation. I hope to get clarification and to ensure that my interpretation is correct.
Thanks for all the comments. Have a nice day :)
Hello
For your first question: ""I know why I need to add this rule to incoming traffic, because the same-security-traffic inter-interface permit is set to FW 01?".
It probably has to do with the ICMP inspection. By default, ICMP traffic is not inspected by the ASA for the return of the device traffic B to the device will be dropped on FW 01. You must activate the ICMP inspection by adding it to the MPF on the SAA default configuration.
For your second question: "I know why I don't not need to nat exempt traffic (10.10.105.0/24 > 10.10.70.0/24)"?".
NAT-control does not affect the same security interfaces, i.e. the same security interfaces can communicate without NAT even if NAT-control is turned on (with some exceptions). See this link for more information.
-
Cisco ASA 5505 VPN Site to Site
Hi all
First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..
I'd appreciate any help that can be directed to this problem please. Slowly losing my mind
Please see details below:
Two ADMS are 7.1
IOS
ASA 1
Nadia
:
ASA Version 9.0 (1)
!
hostname PAYBACK
activate the encrypted password of HSMurh79NVmatjY0
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
2KFQnbNIdI.2KYOU encrypted passwd
names of
local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
link Trunk Description of SW1
switchport trunk allowed vlan 1,10,20,30,40
switchport trunk vlan 1 native
switchport mode trunk
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
No nameif
no level of security
no ip address
!
interface Vlan2
nameif outside
security-level 0
IP 92.51.193.158 255.255.255.252
!
interface Vlan10
nameif inside
security-level 100
IP 192.168.10.1 255.255.255.0
!
interface Vlan20
nameif servers
security-level 100
address 192.168.20.1 255.255.255.0
!
Vlan30 interface
nameif printers
security-level 100
192.168.30.1 IP address 255.255.255.0
!
interface Vlan40
nameif wireless
security-level 100
192.168.40.1 IP address 255.255.255.0
!
connection line banner welcome to the Payback loyalty systems
boot system Disk0: / asa901 - k8.bin
passive FTP mode
summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS lookup field inside
domain-lookup DNS servers
DNS lookup domain printers
DNS domain-lookup wireless
DNS server-group DefaultDNS
Server name 83.147.160.2
Server name 83.147.160.130
permit same-security-traffic inter-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
ftp_server network object
network of the Internal_Report_Server object
Home 192.168.20.21
Description address internal automated report server
network of the Report_Server object
Home 89.234.126.9
Description of server automated reports
service object RDP
service destination tcp 3389 eq
Description RDP to the server
network of the Host_QA_Server object
Home 89.234.126.10
Description QA host external address
network of the Internal_Host_QA object
Home 192.168.20.22
host of computer virtual Description for QA
network of the Internal_QA_Web_Server object
Home 192.168.20.23
Description Web Server in the QA environment
network of the Web_Server_QA_VM object
Home 89.234.126.11
Server Web Description in the QA environment
service object SQL_Server
destination eq 1433 tcp service
network of the Demo_Server object
Home 89.234.126.12
Description server set up for the product demo
network of the Internal_Demo_Server object
Home 192.168.20.24
Internal description of the demo server IP address
network of the NETWORK_OBJ_192.168.20.0_24 object
subnet 192.168.20.0 255.255.255.0
network of the NETWORK_OBJ_192.168.50.0_26 object
255.255.255.192 subnet 192.168.50.0
network of the NETWORK_OBJ_192.168.0.0_16 object
Subnet 192.168.0.0 255.255.0.0
service object MSSQL
destination eq 1434 tcp service
MSSQL port description
VPN network object
192.168.50.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.50.0_24 object
192.168.50.0 subnet 255.255.255.0
service object TS
tcp destination eq 4400 service
service of the TS_Return object
tcp source eq 4400 service
network of the External_QA_3 object
Home 89.234.126.13
network of the Internal_QA_3 object
Home 192.168.20.25
network of the Dev_WebServer object
Home 192.168.20.27
network of the External_Dev_Web object
Home 89.234.126.14
network of the CIX_Subnet object
255.255.255.0 subnet 192.168.100.0
network of the NETWORK_OBJ_192.168.10.0_24 object
192.168.10.0 subnet 255.255.255.0
network of the NETWORK_OBJ_84.39.233.50 object
Home 84.39.233.50
network of the NETWORK_OBJ_92.51.193.158 object
Home 92.51.193.158
network of the NETWORK_OBJ_192.168.100.0_24 object
255.255.255.0 subnet 192.168.100.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
the tcp destination eq ftp service object
the purpose of the tcp destination eq netbios-ssn service
the purpose of the tcp destination eq smtp service
service-object TS
the Payback_Internal object-group network
object-network 192.168.10.0 255.255.255.0
object-network 192.168.20.0 255.255.255.0
object-network 192.168.40.0 255.255.255.0
object-group service DM_INLINE_SERVICE_3
the purpose of the service tcp destination eq www
the purpose of the tcp destination eq https service
service-object TS
service-object, object TS_Return
object-group service DM_INLINE_SERVICE_4
service-object RDP
the purpose of the service tcp destination eq www
the purpose of the tcp destination eq https service
object-group service DM_INLINE_SERVICE_5
purpose purpose of the MSSQL service
service-object RDP
service-object TS
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service DM_INLINE_SERVICE_6
service-object TS
service-object, object TS_Return
the purpose of the service tcp destination eq www
the purpose of the tcp destination eq https service
Note to outside_access_in to access list that this rule allows Internet the interal server.
Notice on the outside_access_in of the access-list allowed:
Comment from outside_access_in-list of FTP access
Comment from outside_access_in-RDP access list
Comment from outside_access_in-list of SMTP access
Note to outside_access_in to access list Net Bios
Comment from outside_access_in-SQL access list
Comment from outside_access_in-list to access TS - 4400
outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server
access host access-list outside_access_in note rule internal QA
Notice on the outside_access_in of the access-list allowed:
Comment from outside_access_in-HTTP access list
Comment from outside_access_in-RDP access list
outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www
Notice on the outside_access_in of the access-list access to the internal Web server:
Notice on the outside_access_in of the access-list allowed:
Comment from outside_access_in-HTTP access list
Comment from outside_access_in-RDP access list
outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server
Note to outside_access_in to access list rule allowing access to the demo server
Notice on the outside_access_in of the access-list allowed:
Comment from outside_access_in-RDP access list
Comment from outside_access_in-list to access MSSQL
outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server
outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3
Note to outside_access_in access to the development Web server access list
outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer
AnyConnect_Client_Local_Print deny any4 any4 ip extended access list
AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137
AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns
Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0
permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0
pager lines 24
Enable logging
information recording console
asdm of logging of information
address record
the journaling recipient
level alerts
Outside 1500 MTU
Within 1500 MTU
MTU 1500 servers
MTU 1500 printers
MTU 1500 wireless
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-711 - 52.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) source Dynamics one interface
NAT (wireless, outdoors) source Dynamics one interface
NAT (servers, outside) no matter what source dynamic interface
NAT (servers, external) static source Internal_Report_Server Report_Server
NAT (servers, external) static source Internal_Host_QA Host_QA_Server
NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM
NAT (servers, external) static source Internal_Demo_Server Demo_Server
NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination
NAT (servers, external) static source Internal_QA_3 External_QA_3
NAT (servers, external) static source Dev_WebServer External_Dev_Web
NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination
NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.10.0 255.255.255.0 inside
http 192.168.40.0 255.255.255.0 wireless
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 84.39.233.50
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 192.168.10.0 255.255.255.0 inside
SSH 192.168.40.0 255.255.255.0 wireless
SSH timeout 5
Console timeout 0dhcpd 192.168.0.1 dns
dhcpd outside auto_config
!
dhcpd address 192.168.10.21 - 192.168.10.240 inside
dhcpd dns 192.168.20.21 83.147.160.2 interface inside
paybackloyalty.com dhcpd option 15 inside ascii interface
dhcpd allow inside
!
dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
dhcpd update dns of the wireless interface
dhcpd option 15 ascii paybackloyalty.com wireless interface
dhcpd activate wireless
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal Payback_VPN group strategy
attributes of Group Policy Payback_VPN
VPN - 10 concurrent connections
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
attributes of Group Policy DfltGrpPolicy
value of 83.147.160.2 DNS server 83.147.160.130
VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
internal GroupPolicy_84.39.233.50 group strategy
attributes of Group Policy GroupPolicy_84.39.233.50
VPN-tunnel-Protocol ikev1, ikev2
Noelle XB/IpvYaATP.2QYm username encrypted password
Noelle username attributes
VPN-group-policy Payback_VPN
type of remote access service
username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
Éanna attributes username
VPN-group-policy Payback_VPN
type of remote access service
Michael qpbleUqUEchRrgQX of encrypted password username
user name Michael attributes
VPN-group-policy Payback_VPN
type of remote access service
username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
user name Danny attributes
VPN-group-policy Payback_VPN
type of remote access service
Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
user name Aileen attributes
VPN-group-policy Payback_VPN
type of remote access service
Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
Aidan username attributes
VPN-group-policy Payback_VPN
type of remote access service
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
shane.c iqGMoWOnfO6YKXbw encrypted password username
username shane.c attributes
VPN-group-policy Payback_VPN
type of remote access service
Shane uYePLcrFadO9pBZx of encrypted password username
user name Shane attributes
VPN-group-policy Payback_VPN
type of remote access service
username, encrypted James TdYPv1pvld/hPM0d password
user name James attributes
VPN-group-policy Payback_VPN
type of remote access service
Mark yruxpddqfyNb.qFn of encrypted password username
user name brand attributes
type of service admin
username password of Mary XND5FTEiyu1L1zFD encrypted
user name Mary attributes
VPN-group-policy Payback_VPN
type of remote access service
Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
Massimo username attributes
VPN-group-policy Payback_VPN
type of remote access service
type tunnel-group Payback_VPN remote access
attributes global-tunnel-group Payback_VPN
VPN1 address pool
Group Policy - by default-Payback_VPN
IPSec-attributes tunnel-group Payback_VPN
IKEv1 pre-shared-key *.
tunnel-group 84.39.233.50 type ipsec-l2l
tunnel-group 84.39.233.50 General-attributes
Group - default policy - GroupPolicy_84.39.233.50
IPSec-attributes tunnel-group 84.39.233.50
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the pptp
inspect the rsh
inspect the rtsp
inspect the sip
inspect the snmp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect xdmcp
inspect the icmp error
inspect the icmp
!
service-policy-international policy global
192.168.20.21 SMTP server
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1ASA 2
ASA Version 9.0 (1)
!
Payback-CIX hostname
activate the encrypted password of HSMurh79NVmatjY0
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
Speed 100
full duplex
!
interface Ethernet0/1
Description this port connects to the local network VIRTUAL 100
switchport access vlan 100
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 100
!
interface Ethernet0/4
switchport access vlan 100
!
interface Ethernet0/5
switchport access vlan 100
!
interface Ethernet0/6
switchport access vlan 100
!
interface Ethernet0/7
switchport access vlan 100
!
interface Vlan2
nameif outside
security-level 0
IP 84.39.233.50 255.255.255.240
!
interface Vlan100
nameif inside
security-level 100
IP 192.168.100.1 address 255.255.255.0
!
banner welcome to Payback loyalty - CIX connection line
passive FTP mode
summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00
DNS domain-lookup outside
DNS lookup field inside
DNS server-group defaultDNS
Name-Server 8.8.8.8
Server name 8.8.4.4
permit same-security-traffic inter-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the host-CIX-1 object
host 192.168.100.2
Description This is the VM server host machine
network object host-External_CIX-1
Home 84.39.233.51
Description This is the external IP address of the server the server VM host
service object RDP
source between 1-65535 destination eq 3389 tcp service
network of the Payback_Office object
Home 92.51.193.158
service object MSQL
destination eq 1433 tcp service
network of the Development_OLTP object
Home 192.168.100.10
Description for Eiresoft VM
network of the External_Development_OLTP object
Home 84.39.233.52
Description This is the external IP address for the virtual machine for Eiresoft
network of the Eiresoft object
Home 146.66.160.70
Contractor s/n description
network of the External_TMC_Web object
Home 84.39.233.53
Description Public address to the TMC Web server
network of the TMC_Webserver object
Home 192.168.100.19
Internal description address TMC Webserver
network of the External_TMC_OLTP object
Home 84.39.233.54
External targets OLTP IP description
network of the TMC_OLTP object
Home 192.168.100.18
description of the interal target IP address
network of the External_OLTP_Failover object
Home 84.39.233.55
IP failover of the OLTP Public description
network of the OLTP_Failover object
Home 192.168.100.60
Server failover OLTP description
network of the servers object
subnet 192.168.20.0 255.255.255.0
being Wired network
192.168.10.0 subnet 255.255.255.0
the subject wireless network
192.168.40.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.100.0_24 object
255.255.255.0 subnet 192.168.100.0
network of the NETWORK_OBJ_192.168.10.0_24 object
192.168.10.0 subnet 255.255.255.0
network of the Eiresoft_2nd object
Home 137.117.217.29
Description 2nd Eiresoft IP
network of the Dev_Test_Webserver object
Home 192.168.100.12
Description address internal to the Test Server Web Dev
network of the External_Dev_Test_Webserver object
Home 84.39.233.56
Description This is the PB Dev Test Webserver
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_2
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_3
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_4
service-object MSQL
service-object RDP
the tcp destination eq ftp service object
object-group service DM_INLINE_SERVICE_5
service-object MSQL
service-object RDP
the tcp destination eq ftp service object
object-group service DM_INLINE_SERVICE_6
service-object MSQL
service-object RDP
the Payback_Intrernal object-group network
object-network servers
Wired network-object
wireless network object
object-group service DM_INLINE_SERVICE_7
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_8
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_9
service-object MSQL
service-object RDP
object-group service DM_INLINE_SERVICE_10
service-object MSQL
service-object RDP
the tcp destination eq ftp service object
object-group service DM_INLINE_SERVICE_11
service-object RDP
the tcp destination eq ftp service object
outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1
Note to access list OLTP Development Office of recovery outside_access_in
outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group
Comment from outside_access_in-access Eiresoft access list
outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group
outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group
Note to outside_access_in access to OLTP for target recovery Office Access list
outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group
outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group
Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server
outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group
Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft
outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group
Note to outside_access_in access from the 2nd IP Eiresoft access list
outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group
outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group
outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group
outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) source Dynamics one interface
NAT (inside, outside) static source CIX-host-1 External_CIX-host-1
NAT (inside, outside) static source Development_OLTP External_Development_OLTP
NAT (inside, outside) static source TMC_Webserver External_TMC_Web
NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP
NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover
NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver
NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination
NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 92.51.193.156 255.255.255.252 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 92.51.193.158
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 92.51.193.156 255.255.255.252 outside
SSH timeout 5
Console timeout 0dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal GroupPolicy_92.51.193.158 group strategy
attributes of Group Policy GroupPolicy_92.51.193.158
VPN-tunnel-Protocol ikev1, ikev2
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
tunnel-group 92.51.193.158 type ipsec-l2l
tunnel-group 92.51.193.158 General-attributes
Group - default policy - GroupPolicy_92.51.193.158
IPSec-attributes tunnel-group 92.51.193.158
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
: endHello
There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.
All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.
Here are a few suggestions on what to change
ASA1
Minimal changes
the object of the LAN network
192.168.10.0 subnet 255.255.255.0
being REMOTE-LAN network
255.255.255.0 subnet 192.168.100.0
NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN
no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination
That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.
Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.
Other suggestions
These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.
PAT-SOURCE network object-group
source networks internal PAT Description
object-network 192.168.10.0 255.255.255.0
object-network 192.168.20.0 255.255.255.0
object-network 192.168.40.0 255.255.255.0
NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source
No source (indoor, outdoor) nat Dynamics one interface
no nat (wireless, outdoors) source Dynamics one interface
no nat (servers, outside) no matter what source dynamic interface
The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.
Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.
network of the SERVERS object
subnet 192.168.20.0 255.255.255.0
network of the VPN-POOL object
192.168.50.0 subnet 255.255.255.0
NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL
no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination
The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.
no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination
It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.
ASA2
Minimal changes
the object of the LAN network
255.255.255.0 subnet 192.168.100.0
being REMOTE-LAN network
192.168.10.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN
no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination
That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.
Finally, we remove the old rule that generated the ASDM.
Other suggestions
PAT-SOURCE network object-group
object-network 192.168.100.0 255.255.255.0
NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source
No source (indoor, outdoor) nat Dynamics one interface
The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.
no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination
It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.
I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.
Hope this makes any sense and has helped
Remember to mark a reply as the answer if it answered your question.
Feel free to ask more if necessary
-Jouni
-
Problem with the VPN site to site for the two cisco asa 5505
Starting with cisco asa. I wanted to do a vpn site-to site of cisco. I need help. I can't ping from site A to site B and vice versa.
Cisco Config asa1
interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 172.xxx.xx.4 255.255.240.0
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.60.2 255.255.255.0
!
passive FTP mode
network of the Lan_Outside object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
Access extensive list ip 192.168.60.0 Outside_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_2 of object-group a
network of the Lan_Outside object
NAT (inside, outside) interface dynamic dns
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 172.110.xx.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.60.0 255.255.255.0 inside
http 96.xx.xx.222 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 96.88.75.222
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
inside access managementdhcpd address 192.168.60.50 - 192.168.60.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_96.xx.xx.222 group strategy
attributes of Group Policy GroupPolicy_96.xx.xx.222
VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 96.xx.xx.222 type ipsec-l2l
tunnel-group 96.xx.xx.222 General-attributes
Group - default policy - GroupPolicy_96.xx.xx.222
96.XX.XX.222 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cisco ASA 2 config
interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 96.xx.xx.222 255.255.255.248
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.1.254 255.255.255.0
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the Lan_Outside object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_4
ip protocol object
icmp protocol object
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_2 of object-group 192.168.1.0 255.255.255.0 192.168.60.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_4 of object-group a
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.60.0_24 NETWORK_OBJ_192.168.60.0_24 non-proxy-arp-search of route static destination
!
network of the Lan_Outside object
dynamic NAT (all, outside) interface
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 96.xx.xx.217 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 172.xxx.xx.4 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 172.110.74.4
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0dhcpd address 192.168.1.50 - 192.168.1.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_172.xxx.xx.4 group strategy
attributes of Group Policy GroupPolicy_172.xxx.xx.4
L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 172.xxx.xx.4 type ipsec-l2l
tunnel-group 172.xxx.xx.4 General-attributes
Group - default policy - GroupPolicy_172.xxx.xx.4
172.xxx.XX.4 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
inspect the httpFor IKEv2 configuration: (example config, you can change to encryption, group,...)
-You must add the declaration of exemption nat (see previous answer).
-set your encryption domain ACLs:
access-list-TRAFFIC IPSEC allowed extended LOCAL REMOTE - LAN LAN ip
-Set the Phase 1:
Crypto ikev2 allow outside
IKEv2 crypto policy 10
3des encryption
the sha md5 integrity
Group 5
FRP sha
second life 86400-Set the Phase 2:
Crypto ipsec ikev2 ipsec IKEV2-PROPOSAL
Esp aes encryption protocol
Esp integrity sha-1 protocol-set the Group of tunnel
tunnel-group REMOTE-PUBLIC-IP type ipsec-l2l
REMOTE-PUBLIC-IP tunnel-group ipsec-attributes
IKEv2 authentication remote pre-shared-key cisco123
IKEv2 authentication local pre-shared-key cisco123-Define the encryption card
address for correspondence CRYPTOMAP 10 - TRAFFIC IPSEC crypto map
card crypto CRYPTOMAP 10 peer set REMOTE-PUBLIC-IP
card crypto CRYPTOMAP 10 set ipsec ikev2-IKEV2-PROPOSAL
CRYPTOMAP interface card crypto outside
crypto isakmp identity addressOn your config, you have all these commands but on your VPN config, you mix ikev1 and ikev2. You have also defined political different ikev2. Just do a bit of cleaning and reached agreement on a 1 strategy for the two site (encryption, hash,...)
Thank you
-
Hi, please I need a help.
I have an IPSEC tunnel with my Cisco ASA and a PFsense Peer, VPN is to include phase 2.
But I could not send pkts on this VPN.
My internal network - 10.2.0.0/17, 172.31.2.2/32 customer network
==========================
FW - counterpart of the ipsec VPN - 01 # sho 177.154.83.34
address of the peers: 177.154.83.34
Tag crypto map: outside_map0, seq num: 4, local addr: 200.243.146.20access extensive list ip 10.2.0.0 outside_cryptomap_8 allow 255.255.128.0 host 172.31.2.2
local ident (addr, mask, prot, port): (10.2.0.0/255.255.128.0/0/0)
Remote ident (addr, mask, prot, port): (172.31.2.2/255.255.255.255/0/0)
current_peer: 177.154.83.34#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 2957, #pkts decrypt: 2957, #pkts check: 2957
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 1local crypto endpt. : 200.243.146.20/0, remote Start crypto. : 177.154.83.34/0
Path mtu 1500, fresh ipsec generals 74, media, mtu 1500
current outbound SPI: C1A13463
current inbound SPI: 5B6B0EABSAS of the esp on arrival:
SPI: 0x5B6B0EAB (1533742763)
transform: aes-256-esp esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 9179136, crypto-card: outside_map0
calendar of his: service life remaining key (s): 858
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0xFFFFFFFF to 0xFFFFFFFF
outgoing esp sas:
SPI: 0xC1A13463 (3248567395)
transform: aes-256-esp esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 9179136, crypto-card: outside_map0
calendar of his: service life remaining key (s): 858
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001===========================
Entry packet - trace FW-VPN-01 # outside icmp 10.2.110.10 1 172.31.2.2 0
Phase: 1
Type:-ROUTE SEARCH
Subtype: entry
Result: ALLOW
Config:
Additional information:
in 0.0.0.0 0.0.0.0 outdoorsPhase: 2
Type: ACCESS-LIST
Subtype:
Result: DECLINE
Config:
Implicit rule
Additional information:Result:
input interface: outdoors
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: drop
Drop-reason: flow (acl-drop) is denied by the configured rule===============================
FW-VPN-01 # sho running-config | 177.154.83.34 Inc.
outside_map0 card crypto 4 peers set 177.154.83.34
internal GroupPolicy_177.154.83.34 group strategy
attributes of Group Policy GroupPolicy_177.154.83.34
tunnel-group 177.154.83.34 type ipsec-l2l
tunnel-group 177.154.83.34 general-attributes
Group - default policy - GroupPolicy_177.154.83.34
IPSec-attributes tunnel-group 177.154.83.34==============================
FW-VPN-01 # sho running-config | 172.31.2.2 Inc.
network 172.31.2.2_32 object
Home 172.31.2.2
access-list sheep extended 10.2.0.0 ip allow 255.255.128.0 host 172.31.2.2
access extensive list ip 10.2.0.0 inside_access_in allow 255.255.128.0 object 172.31.2.2_32
permit access list extended ip object 10.2.0.0_17 object 172.31.2.2_32 outside_cryptomap_5
permit access list extended ip object 10.2.0.0_17 object 172.31.2.2_32 outside_cryptomap_8
NAT (inside, all) source 10.2.0.0_17 destination 10.2.0.0_17 static static 172.31.2.2_32 172.31.2.2_32 non-proxy-arp-search to itineraryso you see the packets traverse your inside interface but no response back. Please check if you have a route to 172.31.2.2 host in your internal network pointing traffic to the ASA.
the package shows plotter drop because you run of out-of-in and in this case, you must specifically that traffic on the acl allow external interface. When the real traffic arrives through vpn, it checks for sysopt and then the interface access list is bypassed. but when you do a package tracer, simulated package does not in reality of vpn and therefore we have that allow outside interface acl for package tarcer to enable.
Maybe you are looking for
-
I have an unwanted application called Advanced Mac Cleaner.
-
I'm tired of finding songs that are still in my folder iTunes, but were removed from my playlists. I do not understand why this is happening, but it's getting very boring. Recently, I made a CD for my grandson of soundtracks of her favorite movies,
-
Equium A210 - excessive noise when using an amplifier
Hi all. I have a Toshiba Satellite A210, and when I plug it into an amp via the headphone jack, I have excessive "noise" through the amp. This only happens when I use the external power supply. If I'm running on batteries it is OK, but it's not good
-
I keep getting invited to download IE8 and I don't want... I keep clicking on cancel, but continues to appear again, how to get them to stop asking me to download this update
-
BlackBerry Smartphones BlackBerry seems to load but won't turn on.
Hi all A week ago, I wore my BB with me for 2 days, forgetting the home charger. Unconsciously, the battery died at the end of the first day in the open air. When I returned home I plugged on the OEM charger and my bb stuck there. He shows me the pho