Cisco ASA fast forward secret

Similar Questions

• Cisco ASA vs 1941?

  Dear, I have a cisco Asa 5510, making the basic roles of firewall in the network. And router 1941 which is our internet router. We plan to provide VPN access and will also host a database that must be accessible from the internet. It would be useful that someone can advice on the following please.

  1. can I configure the requirements above in a cisco router 1941?

  2. do I need a separate firewall device as ASA?

  3. do I need a special permit to achieve?

  4 port transfers a better option for the publication of our database for external access? Wait at least 500 simultaneous (sometimes) users accessing the portal.

  Thank you.

  Hello..

  You can do this by using the Module of internal Service (VPN, ISM) and licensing support on your router and it supports maximum of 500 sessions at a time. But I think it will be more expensive, then do the port forwarding on your router.

  For more information

  http://www.Cisco.com/c/en/us/products/collateral/interfaces-modules/VPN-...

  The port forwarding for you just the database server...

  Please rate if you find this information useful.

  Kind regards!

• IPSec vpn cisco asa and acs 5.1

  We have configured authentication ipsec vpn cisco asa acs 5.1:

  Here is the config in cisco vpn 5580:

  standard access list acltest allow 10.10.30.0 255.255.255.0

  RADIUS protocol AAA-server Gserver

  AAA-server host 10.1.8.10 Gserver (inside)

  Cisco key

  AAA-server host 10.1.8.11 Gserver (inside)

  Cisco key

  internal group gpTest strategy

  gpTest group policy attributes

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list acltest

  type tunnel-group test remote access

  tunnel-group test general attributes

  address localpool pool

  Group Policy - by default-gpTest

  authentication-server-group LOCAL Gserver

  authorization-server-group Gserver

  accounting-server-group Gserver

  IPSec-attributes of tunnel-group test

  pre-shared-key cisco123

  GBA, we config user group: VPN users. all VPN users in this group. ACS can visit his political profile: If the user in the 'VPN users' group, access ACS.

  When we connect from a VPN Client to the server, all users connect to success. When you see the parser in ACS journal, each user success connect also get

  error:

  22040 wrong password or invalid shared secret

  (pls see picture to attach it)

  the system still works, but I don't know why, we get the error log.

  Thanks for any help you can provide!

  Duyen

  Hello Duyen,

  I think I've narrowed the issue. When remote access VPN using RADIUS authentication we must keep in mind that authentication and authorization are included on the same package.

  Depending on your configuration, the ACS is defined as a server RADIUS (Gserver Protocol radius aaa server) and becomes the VPN Tunnel authenticated and 'authorized' on this server group:

  authentication-server-group LOCAL Gserver

  authorization-server-group Gserver

  As noted above, the RADIUS of request/response includes authentication and authorization on the same package. This seems to be a problem of incorrect configuration that we should not set up the 'permission' in the Tunnel of the group.

  Please remove the authorization under the Tunnel of Group:

  No authorization-server-group Gserver

  Please test the connection again and check the logs of the ACS. At this point there are only sucessful newspaper reported on the side of the ACS.

  Is 'Permission-server-group' LDAP permission when authenticating to a LDAP server so to retrieve the attributes of permission on the server. RAY doesn't have the command as explained above.

  I hope this helps.

  Kind regards.

• Cisco ASA 5510 VPN Site to Site with Sonicwall

  I am trying to configure a tunnel between a Cisco ASA 5510 VPN (Version 8.2 (2)) and TZ200 Sonicwall. I rose tunnel and go and I am able to ping the internal IP address of Cisco ASA of the Sonicwall LAN but nothing work. When I try to ping a host behind the Cisco ASA of the Sonicwall LAN I get the following message "rules asymmetrical NAT matched for flows forward and backward; Connection for tcp src outside:10.20.10.x/xxxx dst inside:10.20.2.x/xxxx refused due to failure of reverse path of NAT"on the SAA

  Googling the error above shows the problems with version 8.3 or later that resembled the nat commands have been changed SAA, train is still on 8.2 but I another common question does not add an exemption of NAT I have double-triple checked that I did add an exception rule of NAT of the hosts on the network from cisco for the guests of the Sonicwall network. Looks like I hit a road block so any help would be appreciated. Thank you

  Here are a few excertps of the config file (10.20.2.0 behind the cisco) and 10.20.10.0 behind the sonicwall

  NAT (inside) 0 access-list sheep

  ..

  IP 10.20.2.0 allow Access-list extended sheep 255.255.255.0 10.20.10.0 255.255.255.0

  access extensive list ip 10.20.2.0 outside_1_cryptomap allow 255.255.255.0 10.20.10.0 255.255.255.0

  ..

  card crypto outside_map 1 match address outside_1_cryptomap

  card crypto outside_map 1 set counterpart x.x.x.x

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  ..

  crypto ISAKMP allow outside

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  lifetime 28800

  ..

  internal SiteToSitePolicy group strategy

  attributes of Group Policy SiteToSitePolicy

  VPN-idle-timeout no

  Protocol-tunnel-VPN IPSec

  Split-tunnel-network-list no

  ..

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group x.x.x.x General attributes

  Group Policy - by default-SiteToSitePolicy

  tunnel-group ipsec-attributes x.x.x.x

  pre-shared key *.

  ..

  Added some excerpts from the configuration file

  Hello Manjitriat,

  Okay, detected IPSEC parody is normal, that means you are trying to send unencrypted on a line of encrypted packets.

  Now, if you see on the plotter of package that traffic will hollow the VPN channel all its fine in your site.

  Now the packet tracer must be something like this:

  entrance to Packet-trace inside private_ip_lan destination_private_ip_lan 1025 tcp 80

  Please provide us with the result of the following instructions after you run the packet tracer.

  See the crypto Isakamp SA

  See the crypto Ipsec SA

  Kind regards

  Julio

• View of the horizon 3.5.0 and ThinApp v4.7 with Cisco ASA Smart Tunnel 9.3.3

  Hello

  The problem:

  Our technology smart tunnel doesn't seem to be forward traffic to our new customer from the view.  I wonder what kind of configuration changes must be considered to enable such a connection.  The error returned when searching for the host name goes in the direction of the hostname not found.  Error finding of intellectual property is related to the time-out.

  Background information and specifications:

  We are in the process of upgrading our servers from 5.2 to 6.2 connection.  As part of the upgrade, we want to improve our customers for the Horizon to use version 3.5.0.  To make it easier on vendors and remote computers we prefer also to our Horizon View Client with ThinApp 4.7.3 ThinApp.  We currently have a Cisco ASA, supporting a SSL VPN portal with "Smart Tunnel" technology.  The ASA is currently on firmware 9.3.3 in production, but we have access to version 9.5 in test.

  Preferred connection scenario:

  User > PC > VMware View Client (ThinApp would be) > Cisco ASA Smart Tunnel > view connection server > Virtual Office

  .exe running on the client to view ThinApp:

  It seems the ThinApp Client version view is only launching VMware - view.exe.

  .exe running from the customer view full/thickness:

  VMware - view.exe

  -ftnlsv.exe

  -vmwsprrdpwks.exe

  -ftscanmgr.exe

  There is something else to consider when the view client configuration ThinApp or thickness to work with Cisco SSL VPN Portal and the Smart Tunnel?  We should have ports configured in the client in connection with the same view Firewall works with SSL VPN Portal port redirector functionality.

  We have not been able to find any documentation on how to properly configure the smart to work with the New Horizon 3.5.2 client Tunnel.  A ticket of troubleshooting with Cisco suggests that the Smart Tunnel feature still perhaps not compatible with this new Horizon (thin or thick) client.  Currently, we are looking at other options because it is not not clear whether Cisco will be able to get us the confirmation or offer a solution without delay of our project to upgrade.  Maybe stick to the previous VMware View Client version 5.4.0 which we know work with Smart Tunnel in some situations and with the redirector port for others.

• Fast forward on the videos does not work on tvos 10

  Hello

  After updating to the latest tvos, 10, fast forward on the videos does not work. I can only fast forward when I press on the right place on the pavement and fast forward 10 seconds in time.

  Someone else has the same problem? Is this a bug in update?

  Hello. It seems to work as described here https://help.apple.com/appletv/#/atvb7944597f press next to move to 10 sec, press and hold to fast forward. They have it changed again?

• tried to send emails using the fast-forward button now e-mail flashes on and outside

  tried to send emails using the fast-forward button now e-mail flashes on and outside

  Please disconnect from the Internet temporarily, if necessary, by disabling a Wi - Fi connection or unplug Ethernet cable, whichever is applicable.

  In the Mail menu bar, select

  ▹ Connection Doctor window

  Look for the email account (SMTP) out in the window that opens. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. We'll pick the one affected. Make a note of the settings. Click the sign to remove, and then click OK.

  Reconnect to the Internet and add the account back with the same settings.

• MLB app, fast-forward, rewind

  What on Earth happened to the ability of the application of the MLB to fast forward and rewind? Swipe left and right are simply ignored.

  I use the latest Apple TV app and MLB. This is a bug killer!

  I don't know anything about the application of the MLB, however, wanted to emphasize the 9.2 update made a light blocking rew/FF on the ATV4 in general. He must now click to pause, then slide to scrub. However, I have seen many complaints about support minimal/nonexistent MLB app will of MLB (which was designed and is supported by the app). I don't know if it's the same problem or not, but noted...

  Use your Siri or Apple TV Remote with Apple TV remote (4th generation) - Apple Support

• After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward.

  After 9.2 update I can no longer drag to make fast-forward or rewind during playback of the video. I could do those before the update. I can now only click to jump forwards or backwards in 10 second increments. However, if I stop the video I can then drag to move forward or backward. I tried this on Netflix and Hulu with similar results. Apple TV restarting is not to solve the problem.

  Maybe a bug in the new version?  Does anyone else know this?

  Thank you!

  Many people complain when they reach around in the dark watching a movie they press and cause the movie ff or rwd.

  I think that this version tried to improve the situation by requiring the user to press and release the button then slide as formerly.

• Cannot fast forward a wav file in windows media player 11

  When I join the pc to the windows domain, Windows Media Player version 11.0.5721.5280 leaves me not fast wav files forward, BUT when the Pc is not joined to the domain I have no problems fast forwarding.

  There is no GPO not applied to users or computers. I don't know what could be the problem.

  Anyone have any ideas what could be the cause?

  Thank you!

  Johnny

  Hi Johnny Pappas,.

  I see that you have a problem with windows media player when the computer is connected to the domain network. I'll help you with this problem.

  I suggest you post this question in the Windows XP IT Pro forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro

  Thank you.

• Sansa Fuze + function unadvertized - fast forward?

  Sansa Fuze + with firmare update 02.36.03 (I just noticed to day 02.38.06 but have not yet installed).

  It is good get navigation in folders with update 02.36.03, but controls seem nervous. While practicing, the white point down a display of music started skipping much faster, and a different icon - an arrow double game (fast forward?) come up right.    This might be useful, but how to fight against it?  Is this documented somewhere?

  Research advanced or remote?

  Keep the points left or right to do so.

  And Yes, it's a little fishy to do right at the beginning.

  I started a topic here return ask if it was possible to do

  and it was... I just wasn't hitting the right buttons

• Fast forward Question

  My old Sansa C200 has to listen to you (obviously at a very fast pace) then you were fast shipping.  This has been useful in trying to move forward in a podcast, but not directly to the order of the day.  The Clip + does not seem to support this function.

  Is there a configuration item that I missed that will allow for this?

  Thank you.

  None of the line of Sansa mp3 players have done this since the advent of the e200v2 series. I (and others) agree that it was a useful tool to fast-forward through commericals in podcasts, etc. but unfortunately he has not been resurrected, that this is due to the lack of compatibility with newer processors or the interests of the development team.

• Fast forward and rewind

  When I play a file and want to move forward towards a particular point in time registration or back controls "Fast forward" and "Rewind" doesn't seem to work. The FF takes just the player at the end of the file and the RW just bring it at the beginning. There are no points between the two.

  Thank you

  Paul

  If you give the FF or REW button one press, this is what will happen. To ' scroll ' a song, press and hold the FF or REW until you get to the point where you want to resume.

  Of course, that "point" would be easier to find if the audio played during the 'research' as it did on the first series of e200v1.

• M250 rev 2 fast forward is not

  I have an another m250 that pressing and holding the causes fast forward fast before going faster and faster through the file. A podcast of the hour can be fast, passed through in a few minutes.

  The m250 in question has a steady, slow speed, fast-forward. Supporting and now fast forward can take 15 minutes via a podcast of an hour. If my thumb wiggles or didn't press hard enough for fifteen minutes, the m250 seems to think I typed the next song (similar to the FF button) button and proceeds to the next song/podcast.

  Any difficulty other than scream. curse and throw this thing against the wall? This really STINKS.

  I have the same problem with my version 2.x m250. Of course, it does not support the accelerated FF/REW. My first m250 was a 4.x version and it had serious problems and I did an RMA number on it. However, before doing so, I noticed that FF/REW accelerated was a supported feature. So, when I found that the 2.x version of replacement unit did not support accelerated FF/REW, I was extremely disappointed. After all, I listen to usually 3 files of long hours. I bought another m250, hoping that this would be version 4.x and it was. Bought another, and it too is 4.x.

  Rockbox support, I read that version 2.x with a different chip, so firmwares are specific to these models. I do not expect that they will be releasing versions of firmware so you're probably stuck with the FF bla on your 2.x. However, I hear you can get m250s pretty cheap at the moment ("$ 15"!), and your chances of getting a 4.x seem good.

• Blue icon fast forward on all my pictures, .docs, PDF what is?

  Blue icon fast forward on all my pictures, .docs, PDF what is?

  You would use Norton by chance?

  http://www.computing.NET/answers/Office/Word-document-icons/10574.html

  http://www.computing.NET/answers/Windows-Vista/blue-box-with-arrow/4201.html

  If so, read above.

  See you soon.

  Mick Murphy - Microsoft partner