Cisco ASA & T1 connection

The ASA supports WAN protocols to establish connections from T1?

Sorry, but the ASA does not offer any WAN interfaces such as T1. It offers only FastEthernet and GigEthernet right now.

-Eric

Be sure to note all the useful messages.

Tags: Cisco Security

Similar Questions

Cisco ASA, connect an IP address on the OUTSIDE of the VPN remote access

Hello

I tried to find resources on the net but could not find a solution, then post it here. Maybe someone can help.

So the problem is that I'm trying to access a server on the cloud for remote VPN access (cisco asa 5510).

The server on the cloud (54.54.54.54) is only accessible from the outside interface (192.168.11.2) NY Firewall (cisco asa 5510)

I added some ACE for this in the ACL of VPN tunnel to divide.

NY-standard host allowed fw # access - list vpn_remote-customer 54.54.54.54

And I see the road added to my cliet machine after the VPN connection, but still it cannot connect to this server.

The network INTERIOR, I can connect to the server.

Thanks in advance.

Hello

This is most likely a problem with NAT hair/U-turn hairpin.

Will need to see the configurations or you would need to check yourself

I don't know what your version of the Software ASA is to be like who determines what is the format of NAT configuration.

So far, you have confirmed that the ASA VPN configuration provides the VPN Client with the route to the remote server. Then in circulation should be tunnel to the ASA.

Then, you will need to check the output of this command

See the race same-security-traffic

You should see the command in the output below

permit same-security-traffic intra-interface

If you do not, you will need to add it. This effect of controls is to allow traffic to enter an interface and exit through the same interface. In your case this applies to Internet VPN Client traffic to the remote server as it between ' outside ' and spell through the 'outside'.

Then, should ensure that dynamic PAT is configured for the VPN Clients.

8.2 software (and below)

You most likely have a dynamic configuration PAT like that on the firewall, if levels of above running software version

Global 1 interface (outside)

NAT (inside) 1 0.0.0.0 0.0.0.0

In this situation if we wanted to add dynamic PAT for a pool of VPN, we would add

NAT (outside) 1

This would allow users to use the same public IP address as LAN users, when accessing the remote VPN server

Software 8.3 (and above)

Because the NAT configuration format is completely different in the latest software, you could probably just add a new configuration of NAT completely without adding a

network of the VPN-PAT object

subnet

dynamic NAT interface (outdoors, outdoor)

Of course, its possible that there could be some configuration NAT already on the device which could cause problems for this configuration. If this does not work then that we would have to look at the actual configurations on the ASA.

Hope this helps

Let me know how it goes

-Jouni

disable the cisco ASA connection using only activate password via asdm

Hi all

How to disable the connection to my cisco asa 5520 using only activate password via asdm? I like to asdm connection using the user name and password. TIA!

The command:
```
 aaa authentication http console LOCAL
```
.. .will be force users accessing to ASDM (which uses transport http (s)) to be authenticated on the LOCAL database.

You can also specify another list of defined authentication method, such as RADIUS, RADIUS or AD. (Although t wew love to leave a LOCAL method on the spot, in which case your external authentication server is not available.)

Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

Thank you

interface Ethernet0/0

Speed 100

full duplex

nameif outside

security-level 0

IP x.x.x.x 255.255.255.240

!

interface Ethernet0/1

Speed 100

full duplex

nameif inside

security-level 100

IP 10.88.10.254 255.255.255.0

!

interface Management0/0

Shutdown

nameif management

security-level 0

no ip address

!

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

network of the PAT_to_Outside_ClassA object

10.88.0.0 subnet 255.255.0.0

network of the PAT_to_Outside_ClassB object

subnet 172.16.0.0 255.240.0.0

network of the PAT_to_Outside_ClassC object

Subnet 192.168.0.0 255.255.240.0

network of the LocalNetwork object

10.88.0.0 subnet 255.255.0.0

network of the RemoteNetwork1 object

Subnet 192.168.0.0 255.255.0.0

network of the RemoteNetwork2 object

172.16.10.0 subnet 255.255.255.0

network of the RemoteNetwork3 object

10.86.0.0 subnet 255.255.0.0

network of the RemoteNetwork4 object

10.250.1.0 subnet 255.255.255.0

network of the NatExempt object

10.88.10.0 subnet 255.255.255.0

the Site_to_SiteVPN1 object-group network

object-network 192.168.4.0 255.255.254.0

object-network 172.16.10.0 255.255.255.0

object-network 10.0.0.0 255.0.0.0

outside_access_in deny ip extended access list a whole

inside_access_in of access allowed any ip an extended list

11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

NAT static NatExempt NatExempt of the source (indoor, outdoor)

NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

!

network of the PAT_to_Outside_ClassA object

NAT dynamic interface (indoor, outdoor)

network of the PAT_to_Outside_ClassB object

NAT dynamic interface (indoor, outdoor)

network of the PAT_to_Outside_ClassC object

NAT dynamic interface (indoor, outdoor)

Access-group outside_access_in in interface outside

inside_access_in access to the interface inside group

Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

dynamic-access-policy-registration DfltAccessPolicy

Sysopt connection timewait

Service resetoutside

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto-map dynamic dynmap 10 set pfs

Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

Crypto-map dynamic dynmap 10 the value reverse-road

card crypto mymap 1 match address outside_1_cryptomap

card crypto mymap 1 set counterpart x.x.x.x

card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

card crypto mymap 86400 seconds, 1 lifetime of security association set

map mymap 1 set security-association life crypto kilobytes 4608000

map mymap 100-isakmp ipsec crypto dynamic dynmap

mymap outside crypto map interface

crypto isakmp identity address

Crypto isakmp nat-traversal 30

Crypto ikev1 allow outside

IKEv1 crypto ipsec-over-tcp port 10000

IKEv1 crypto policy 5

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 1

life 86400

IKEv1 crypto policy 50

preshared authentication

the Encryption

md5 hash

Group 2

life 86400

IKEv1 crypto policy 60

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 70

preshared authentication

aes-256 encryption

sha hash

Group 1

life 86400

IKEv1 crypto policy 90

preshared authentication

aes encryption

sha hash

Group 2

life 86400

Telnet timeout 5

Console timeout 0

management-access inside

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal BACKDOORVPN group policy

BACKDOORVPN group policy attributes

value of VPN-filter 11

Ikev1 VPN-tunnel-Protocol

Split-tunnel-policy tunnelall

BH.UK value by default-field

type tunnel-group BACKDOORVPN remote access

attributes global-tunnel-group BACKDOORVPN

address pool Admin_Pool

Group Policy - by default-BACKDOORVPN

IPSec-attributes tunnel-group BACKDOORVPN

IKEv1 pre-shared-key *.

tunnel-group x.x.x.x type ipsec-l2l

tunnel-group ipsec-attributes x.x.x.x

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

Excellent.

Evaluate the useful ticket.

Thank you

Rizwan James

How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

Hi team

Hope you do well. !!!

currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

1 users will connect: user advanced browser on SSL VPN pop past username and password.

2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

This is my requirement, so someone please guide me how to set up step by step.

1. how to set up the Radius Server?

2. how to configure CISCO ASA?

Thanks in advance.

Hey Chick,

Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

Hope this helps

Knockaert

AnyConnect VPN for Cisco ASA 5505 refused connections

I'm trying to set up my Cisco 5505 with AnyConnect VPN client VPN access. Here is the relevant information of my config:

interface Vlan2
mac-address xxxx.xxxx.xxxx
nameif outside
security-level 0
ip address A.A.A.A 255.255.255.240
!
access-list outside_access_in extended permit tcp any host C.C.C.C eq pptp
access-list outside_access_in extended permit tcp any host C.C.C.C eq https
access-list outside_access_in extended permit tcp any host C.C.C.C eq ftp
access-list outside_access_in extended permit tcp any host C.C.C.D eq https
access-list outside_access_in extended permit tcp any host C.C.C.D eq ftp
access-list outside_access_in extended permit tcp any host C.C.C.D eq www
access-list outside_access_in extended permit tcp any host C.C.C.C eq smtp
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any host C.C.C.D eq ssh
access-list outside_access_in extended permit tcp any host C.C.C.D eq 8080
access-list outside_access_in extended permit gre any host C.C.C.C
access-list outside_access_out extended permit ip any any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip any interface outside
access-list inside_access_out extended permit ip any any

access-group inside_access_in in interface inside
access-group inside_access_out out interface inside
access-group outside_access_in in interface outside
access-group outside_access_out out interface outside

webvpn
enable inside
enable outside
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable

group-policy DfltGrpPolicy attributes
dns-server value X.X.X.X
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value
address-pools value palm
webvpn
svc rekey time 30
svc rekey method ssl
svc ask enable default webvpn

policy-map global_policy
class inspection_default
inspect pptp
inspect http
inspect icmp
inspect ftp
!

When I try to connect, I get this error in the real-time log viewer:

TCP access denied by ACL from X.X.X.X/57356 to outside:A.A.A.A/443

Here are the details of the license:

Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                        : 3, DMZ Restricted
Inside Hosts                 : Unlimited
Failover                     : Disabled
VPN-DES                      : Enabled
VPN-3DES-AES                 : Enabled
SSL VPN Peers                : 2
Total VPN Peers              : 10
Dual ISPs                    : Disabled
VLAN Trunk Ports             : 0
Shared License               : Disabled
AnyConnect for Mobile        : Disabled
AnyConnect for Linksys phone : Disabled
AnyConnect Essentials        : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions      : 2
Total UC Proxy Sessions      : 2
Botnet Traffic Filter        : Disabled

This platform has a Base license.

Can someone tell me what I am doing wrong or what access list I'm missing?

I have two Cisco ASA 5510 firewall with a similar setup configuration and the AnyConnect SSL VPN works great.

Hi Matt,

You are probably landing on the tunnel-group by default - you will need to indicate which group to connect to the client. This can be done in different ways - I see that you already have a defined group aliases, but to be able to use that you must configure:

WebVPN

tunnel-group-list activate

Alternatively, if you have only a single group, you can add 'group-url https://yourasa.yourcompany.com/ permit' to the webvpn attributes tunnel-group.

HTH

Herbert

VPN spans more than two connections WAN on Cisco ASA?

Hello

I have a quick question for you guys, I'm not too sure if you can do it.

Basically, you connect two offices together and need higher bandwidth between sites via VPN. The main site has a leased line and the remote site has a SDSL connection with a secondary line ADSL with another provider, in failover mode.

There is a Cisco ASA 5520 to the master branch and 5510 remotely, with a VPN site-to site between sites. Is it possible to use the command-line failover to increase our bandwidth over the site to site VPN? I mean, it's create a VPN link combined with the two WAN?

DrayTek have a feature on their 2930 series that allows you to perform this VPN called trunk/collage. I was wondering if this is possible on the Cisco ASA? If not, is anyway could I do this with any additional material? I don't want to use the Draytek to the mainsite, obviously because the load he'd probably kill, but I'm not against the use of this on the remote site in front of the ASA.

Thanks in advance.

There is no feature of the ASA that does what you ask, as much as I KNOW.

Depending on your traffic profile, you might be able to hack a solution by creating two VPN site-to-site (one per SDSL) and other agents via ADSL and by applying the cryptomap for a portion of the traffic to one and the rest of the traffic to the other.

Disabling one to connect in Cisco ASA

What is the best way to disable anyconnect in Cisco ASA.

Thank you

The best way to disable remote access VPN SSL (most common type by far when using customers Anyconnect) is to disable webvpn ("no webvpn") in set up mode.

Cisco asa 5505 and centos VPN server connection

Hi all

Please I want to set up a VPN between Cisco asa 5505 and centos server.

Here's my senerio

-------------------------

ASA 5505

Public IP 155.155.155.2

Local NETWORK: 192.168.6.X

CentOS Server

------------------

Public ip address: 155.155.155.6

Thank you guys

Apology, do you mean access remote VPN Client of hundred BONE for Cisco ASA 5505?

If the remote access, here are the sample configuration:

http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008060f25c.shtml

Cisco ASA 5505 VPN Site to Site

Hi all

First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..

I'd appreciate any help that can be directed to this problem please. Slowly losing my mind

Please see details below:

Two ADMS are 7.1

IOS

ASA 1

Nadia

:

ASA Version 9.0 (1)

!

hostname PAYBACK

activate the encrypted password of HSMurh79NVmatjY0

volatile xlate deny tcp any4 any4

volatile xlate deny tcp any4 any6

volatile xlate deny tcp any6 any4

volatile xlate deny tcp any6 any6

volatile xlate deny udp any4 any4 eq field

volatile xlate deny udp any4 any6 eq field

volatile xlate deny udp any6 any4 eq field

volatile xlate deny udp any6 any6 eq field

2KFQnbNIdI.2KYOU encrypted passwd

names of

local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

link Trunk Description of SW1

switchport trunk allowed vlan 1,10,20,30,40

switchport trunk vlan 1 native

switchport mode trunk

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

No nameif

no level of security

no ip address

!

interface Vlan2

nameif outside

security-level 0

IP 92.51.193.158 255.255.255.252

!

interface Vlan10

nameif inside

security-level 100

IP 192.168.10.1 255.255.255.0

!

interface Vlan20

nameif servers

security-level 100

address 192.168.20.1 255.255.255.0

!

Vlan30 interface

nameif printers

security-level 100

192.168.30.1 IP address 255.255.255.0

!

interface Vlan40

nameif wireless

security-level 100

192.168.40.1 IP address 255.255.255.0

!

connection line banner welcome to the Payback loyalty systems

boot system Disk0: / asa901 - k8.bin

passive FTP mode

summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS domain-lookup outside

DNS lookup field inside

domain-lookup DNS servers

DNS lookup domain printers

DNS domain-lookup wireless

DNS server-group DefaultDNS

Server name 83.147.160.2

Server name 83.147.160.130

permit same-security-traffic inter-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

ftp_server network object

network of the Internal_Report_Server object

Home 192.168.20.21

Description address internal automated report server

network of the Report_Server object

Home 89.234.126.9

Description of server automated reports

service object RDP

service destination tcp 3389 eq

Description RDP to the server

network of the Host_QA_Server object

Home 89.234.126.10

Description QA host external address

network of the Internal_Host_QA object

Home 192.168.20.22

host of computer virtual Description for QA

network of the Internal_QA_Web_Server object

Home 192.168.20.23

Description Web Server in the QA environment

network of the Web_Server_QA_VM object

Home 89.234.126.11

Server Web Description in the QA environment

service object SQL_Server

destination eq 1433 tcp service

network of the Demo_Server object

Home 89.234.126.12

Description server set up for the product demo

network of the Internal_Demo_Server object

Home 192.168.20.24

Internal description of the demo server IP address

network of the NETWORK_OBJ_192.168.20.0_24 object

subnet 192.168.20.0 255.255.255.0

network of the NETWORK_OBJ_192.168.50.0_26 object

255.255.255.192 subnet 192.168.50.0

network of the NETWORK_OBJ_192.168.0.0_16 object

Subnet 192.168.0.0 255.255.0.0

service object MSSQL

destination eq 1434 tcp service

MSSQL port description

VPN network object

192.168.50.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.50.0_24 object

192.168.50.0 subnet 255.255.255.0

service object TS

tcp destination eq 4400 service

service of the TS_Return object

tcp source eq 4400 service

network of the External_QA_3 object

Home 89.234.126.13

network of the Internal_QA_3 object

Home 192.168.20.25

network of the Dev_WebServer object

Home 192.168.20.27

network of the External_Dev_Web object

Home 89.234.126.14

network of the CIX_Subnet object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.10.0_24 object

192.168.10.0 subnet 255.255.255.0

network of the NETWORK_OBJ_84.39.233.50 object

Home 84.39.233.50

network of the NETWORK_OBJ_92.51.193.158 object

Home 92.51.193.158

network of the NETWORK_OBJ_192.168.100.0_24 object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.1.0_24 object

subnet 192.168.1.0 255.255.255.0

object-group service DM_INLINE_SERVICE_1

the tcp destination eq ftp service object

the purpose of the tcp destination eq netbios-ssn service

the purpose of the tcp destination eq smtp service

service-object TS

the Payback_Internal object-group network

object-network 192.168.10.0 255.255.255.0

object-network 192.168.20.0 255.255.255.0

object-network 192.168.40.0 255.255.255.0

object-group service DM_INLINE_SERVICE_3

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

service-object TS

service-object, object TS_Return

object-group service DM_INLINE_SERVICE_4

service-object RDP

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

object-group service DM_INLINE_SERVICE_5

purpose purpose of the MSSQL service

service-object RDP

service-object TS

object-group Protocol TCPUDP

object-protocol udp

object-tcp protocol

object-group service DM_INLINE_SERVICE_6

service-object TS

service-object, object TS_Return

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

Note to outside_access_in to access list that this rule allows Internet the interal server.

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-list of FTP access

Comment from outside_access_in-RDP access list

Comment from outside_access_in-list of SMTP access

Note to outside_access_in to access list Net Bios

Comment from outside_access_in-SQL access list

Comment from outside_access_in-list to access TS - 4400

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server

access host access-list outside_access_in note rule internal QA

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-HTTP access list

Comment from outside_access_in-RDP access list

outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www

Notice on the outside_access_in of the access-list access to the internal Web server:

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-HTTP access list

Comment from outside_access_in-RDP access list

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server

Note to outside_access_in to access list rule allowing access to the demo server

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-RDP access list

Comment from outside_access_in-list to access MSSQL

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3

Note to outside_access_in access to the development Web server access list

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer

AnyConnect_Client_Local_Print deny any4 any4 ip extended access list

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd

Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631

print the access-list AnyConnect_Client_Local_Print Note Windows port

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100

access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353

AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355

Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137

AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns

Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0

permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0

pager lines 24

Enable logging

information recording console

asdm of logging of information

address record

[email protected] / * /.

the journaling recipient

[email protected] / * /.

level alerts

Outside 1500 MTU

Within 1500 MTU

MTU 1500 servers

MTU 1500 printers

MTU 1500 wireless

no failover

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm-711 - 52.bin

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT (inside, outside) source Dynamics one interface

NAT (wireless, outdoors) source Dynamics one interface

NAT (servers, outside) no matter what source dynamic interface

NAT (servers, external) static source Internal_Report_Server Report_Server

NAT (servers, external) static source Internal_Host_QA Host_QA_Server

NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM

NAT (servers, external) static source Internal_Demo_Server Demo_Server

NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

NAT (servers, external) static source Internal_QA_3 External_QA_3

NAT (servers, external) static source Dev_WebServer External_Dev_Web

NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.10.0 255.255.255.0 inside
http 192.168.40.0 255.255.255.0 wireless
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 84.39.233.50
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 192.168.10.0 255.255.255.0 inside
SSH 192.168.40.0 255.255.255.0 wireless
SSH timeout 5
Console timeout 0

dhcpd 192.168.0.1 dns
dhcpd outside auto_config
!
dhcpd address 192.168.10.21 - 192.168.10.240 inside
dhcpd dns 192.168.20.21 83.147.160.2 interface inside
paybackloyalty.com dhcpd option 15 inside ascii interface
dhcpd allow inside
!
dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
dhcpd update dns of the wireless interface
dhcpd option 15 ascii paybackloyalty.com wireless interface
dhcpd activate wireless
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal Payback_VPN group strategy
attributes of Group Policy Payback_VPN
VPN - 10 concurrent connections
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
attributes of Group Policy DfltGrpPolicy
value of 83.147.160.2 DNS server 83.147.160.130
VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
internal GroupPolicy_84.39.233.50 group strategy
attributes of Group Policy GroupPolicy_84.39.233.50
VPN-tunnel-Protocol ikev1, ikev2
Noelle XB/IpvYaATP.2QYm username encrypted password
Noelle username attributes
VPN-group-policy Payback_VPN
type of remote access service
username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
Éanna attributes username
VPN-group-policy Payback_VPN
type of remote access service
Michael qpbleUqUEchRrgQX of encrypted password username
user name Michael attributes
VPN-group-policy Payback_VPN
type of remote access service
username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
user name Danny attributes
VPN-group-policy Payback_VPN
type of remote access service
Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
user name Aileen attributes
VPN-group-policy Payback_VPN
type of remote access service
Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
Aidan username attributes
VPN-group-policy Payback_VPN
type of remote access service
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
shane.c iqGMoWOnfO6YKXbw encrypted password username
username shane.c attributes
VPN-group-policy Payback_VPN
type of remote access service
Shane uYePLcrFadO9pBZx of encrypted password username
user name Shane attributes
VPN-group-policy Payback_VPN
type of remote access service
username, encrypted James TdYPv1pvld/hPM0d password
user name James attributes
VPN-group-policy Payback_VPN
type of remote access service
Mark yruxpddqfyNb.qFn of encrypted password username
user name brand attributes
type of service admin
username password of Mary XND5FTEiyu1L1zFD encrypted
user name Mary attributes
VPN-group-policy Payback_VPN
type of remote access service
Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
Massimo username attributes
VPN-group-policy Payback_VPN
type of remote access service
type tunnel-group Payback_VPN remote access
attributes global-tunnel-group Payback_VPN
VPN1 address pool
Group Policy - by default-Payback_VPN
IPSec-attributes tunnel-group Payback_VPN
IKEv1 pre-shared-key *.
tunnel-group 84.39.233.50 type ipsec-l2l
tunnel-group 84.39.233.50 General-attributes
Group - default policy - GroupPolicy_84.39.233.50
IPSec-attributes tunnel-group 84.39.233.50
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the pptp
inspect the rsh
inspect the rtsp
inspect the sip
inspect the snmp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect xdmcp
inspect the icmp error
inspect the icmp
!
service-policy-international policy global
192.168.20.21 SMTP server
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1

ASA 2

ASA Version 9.0 (1)

!

Payback-CIX hostname

activate the encrypted password of HSMurh79NVmatjY0

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

Description this port connects to the local network VIRTUAL 100

switchport access vlan 100

!

interface Ethernet0/2

!

interface Ethernet0/3

switchport access vlan 100

!

interface Ethernet0/4

switchport access vlan 100

!

interface Ethernet0/5

switchport access vlan 100

!

interface Ethernet0/6

switchport access vlan 100

!

interface Ethernet0/7

switchport access vlan 100

!

interface Vlan2

nameif outside

security-level 0

IP 84.39.233.50 255.255.255.240

!

interface Vlan100

nameif inside

security-level 100

IP 192.168.100.1 address 255.255.255.0

!

banner welcome to Payback loyalty - CIX connection line

passive FTP mode

summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS domain-lookup outside

DNS lookup field inside

DNS server-group defaultDNS

Name-Server 8.8.8.8

Server name 8.8.4.4

permit same-security-traffic inter-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

network of the host-CIX-1 object

host 192.168.100.2

Description This is the VM server host machine

network object host-External_CIX-1

Home 84.39.233.51

Description This is the external IP address of the server the server VM host

service object RDP

source between 1-65535 destination eq 3389 tcp service

network of the Payback_Office object

Home 92.51.193.158

service object MSQL

destination eq 1433 tcp service

network of the Development_OLTP object

Home 192.168.100.10

Description for Eiresoft VM

network of the External_Development_OLTP object

Home 84.39.233.52

Description This is the external IP address for the virtual machine for Eiresoft

network of the Eiresoft object

Home 146.66.160.70

Contractor s/n description

network of the External_TMC_Web object

Home 84.39.233.53

Description Public address to the TMC Web server

network of the TMC_Webserver object

Home 192.168.100.19

Internal description address TMC Webserver

network of the External_TMC_OLTP object

Home 84.39.233.54

External targets OLTP IP description

network of the TMC_OLTP object

Home 192.168.100.18

description of the interal target IP address

network of the External_OLTP_Failover object

Home 84.39.233.55

IP failover of the OLTP Public description

network of the OLTP_Failover object

Home 192.168.100.60

Server failover OLTP description

network of the servers object

subnet 192.168.20.0 255.255.255.0

being Wired network

192.168.10.0 subnet 255.255.255.0

the subject wireless network

192.168.40.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.100.0_24 object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.10.0_24 object

192.168.10.0 subnet 255.255.255.0

network of the Eiresoft_2nd object

Home 137.117.217.29

Description 2nd Eiresoft IP

network of the Dev_Test_Webserver object

Home 192.168.100.12

Description address internal to the Test Server Web Dev

network of the External_Dev_Test_Webserver object

Home 84.39.233.56

Description This is the PB Dev Test Webserver

network of the NETWORK_OBJ_192.168.1.0_24 object

subnet 192.168.1.0 255.255.255.0

object-group service DM_INLINE_SERVICE_1

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_2

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_3

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_4

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_5

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_6

service-object MSQL

service-object RDP

the Payback_Intrernal object-group network

object-network servers

Wired network-object

wireless network object

object-group service DM_INLINE_SERVICE_7

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_8

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_9

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_10

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_11

service-object RDP

the tcp destination eq ftp service object

outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1

Note to access list OLTP Development Office of recovery outside_access_in

outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group

Comment from outside_access_in-access Eiresoft access list

outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group

Note to outside_access_in access to OLTP for target recovery Office Access list

outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group

Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server

outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group

Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft

outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group

Note to outside_access_in access from the 2nd IP Eiresoft access list

outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group

outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Outside 1500 MTU

Within 1500 MTU

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT (inside, outside) source Dynamics one interface

NAT (inside, outside) static source CIX-host-1 External_CIX-host-1

NAT (inside, outside) static source Development_OLTP External_Development_OLTP

NAT (inside, outside) static source TMC_Webserver External_TMC_Web

NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP

NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover

NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver

NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

the ssh LOCAL console AAA authentication

Enable http server

http 92.51.193.156 255.255.255.252 outside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit

Crypto ipsec ikev2 ipsec-proposal OF

encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 92.51.193.158
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 92.51.193.156 255.255.255.252 outside
SSH timeout 5
Console timeout 0

dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal GroupPolicy_92.51.193.158 group strategy
attributes of Group Policy GroupPolicy_92.51.193.158
VPN-tunnel-Protocol ikev1, ikev2
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
tunnel-group 92.51.193.158 type ipsec-l2l
tunnel-group 92.51.193.158 General-attributes
Group - default policy - GroupPolicy_92.51.193.158
IPSec-attributes tunnel-group 92.51.193.158
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
: end

Hello

There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.

All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.

Here are a few suggestions on what to change

ASA1

Minimal changes

the object of the LAN network

192.168.10.0 subnet 255.255.255.0

being REMOTE-LAN network

255.255.255.0 subnet 192.168.100.0

NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.

Other suggestions

These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.

PAT-SOURCE network object-group

source networks internal PAT Description

object-network 192.168.10.0 255.255.255.0

object-network 192.168.20.0 255.255.255.0

object-network 192.168.40.0 255.255.255.0

NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

No source (indoor, outdoor) nat Dynamics one interface

no nat (wireless, outdoors) source Dynamics one interface

no nat (servers, outside) no matter what source dynamic interface

The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.

Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.

network of the SERVERS object

subnet 192.168.20.0 255.255.255.0

network of the VPN-POOL object

192.168.50.0 subnet 255.255.255.0

NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL

no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

ASA2

Minimal changes

the object of the LAN network

255.255.255.0 subnet 192.168.100.0

being REMOTE-LAN network

192.168.10.0 subnet 255.255.255.0

NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

Finally, we remove the old rule that generated the ASDM.

Other suggestions

PAT-SOURCE network object-group

object-network 192.168.100.0 255.255.255.0

NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

No source (indoor, outdoor) nat Dynamics one interface

The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.

Hope this makes any sense and has helped

Remember to mark a reply as the answer if it answered your question.

Feel free to ask more if necessary

-Jouni

Cisco asa geo blocking.

Is there a way by which we can block all connections from a country on Cisco ASA, without us manually define an ACL.

Hardware Cisco ASA5510-

-Version 9.0

N °

This kind of functionality is available in newer models (ASA 5500 - X series) when you add modules of services of firepower with their associated licenses.

They can download and automatically update a database of geolocation you can use in your access policy.

I can't boot on my Cisco ASA 5505

Hello;

I am facing a problem with my cisco ASA 5505 firewall. When I connect my cable to console the firewall to start setting firewall load and stop until the copyright. ICN can't access to the firewall to view the configuration. I start also with Rommon but I am facing the same problem. Does anyone have an idea of this problem and can help me?

Please, it's so urgencly!

Hello

What version of software is on the asa and the amount of memory is on the device?

Thank you

John

It is recommended to have a vulnerability for Cisco ASA device scan.

Dear everybody.

I have a doubt about the analysis of vulnerabilities for Cisco ASA device. Currently we have a vulnerability to network devices include firewalls. But after race for cisco ASA vulnerability scanning, found nothing in the analysis report.

Is it is recommended to have a Cisco ASA vulnerability scanning and it will defeat the purpose of the firewall?

I do not understand you ask you can set the ASA to allow an external user, run an analysis on the internal network?

If so the answer is generally no. The ASA, by default, not allow incoming connections (or attempts of connections) that are not explicitly allowed in a list of inbound access (applied to the external interface). In most cases there should also be (NAT) network address translation rules configured.

If you had a remote access VPN, you can allow external scanner to connect through that, then they would have the necessary access to analyze internal systems (assuming that allowed VPN access to all internal networks)

Using a Cisco ASA 5505 to transfer applications PXE (WDS)

I have a Cisco ASA 5505 that uses approximately 5 CARDS for different networks. Currently, I use my ASA to route traffic as it is the only Cisco device I have able to the small amount of routing required by my network.

Keep separate things that I use 5 CARDS for different networks like outdoors, corp, Printers,workstations, serversand public. Each has a different subnet I keep separate to control all ACL through the firewall of the SAA. All (for example, DHCP with global scope) works very well except the WDS server.

My question is, now I have a new PC connected to the workstations LAN NETWORK card looking for my WDS server that is on the Server LAN. How can I get requests for all different NIC to flow to the servers LAN NIC?

Hello

If you require pass queries all other interfaces to the server DHCP behind "servers" interface?

Then, you need to configure DHCP Relay

Server dhcprelay

dhcprelay enable

dhcprelay enable

-Jouni

A possible bug related to the Cisco ASA "show access-list"?

We had a strange problem in our configuration of ASA.

In the "show running-config:

Inside_access_in access-list CM000067 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:http_access

Inside_access_in access-list CM000458 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:https_access

Note to inside_access_in to access test 11111111111111111111111111 EXP:1/16/2014 OWN list: IT_Security BZU:Network_Security

access-list extended inside_access_in permit tcp host 1.1.1.1 host 192.168.20.86 eq 81 Journal

access-list inside_access_in note CM000260 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:netbios - dgm

access-list inside_access_in note CM006598 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:netbios - ns

access-list inside_access_in note CM000220 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:netbios - ssn

access-list inside_access_in note CM000223 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:tcp / 445

inside_access_in list extended access permitted tcp 172.31.254.0 255.255.255.0 any eq www log

inside_access_in allowed extended access list tcp 172.31.254.0 255.255.255.0 any https eq connect

inside_access_in list extended access permit udp 172.31.254.0 255.255.255.0 any eq netbios-dgm log

inside_access_in list extended access permit udp 172.31.254.0 255.255.255.0 connect any eq netbios-ns

inside_access_in list extended access permitted tcp 172.31.254.0 255.255.255.0 any eq netbios-ssn log

inside_access_in list extended access permitted tcp 172.31.254.0 connect any EQ 445 255.255.255.0

Inside_access_in access-list CM000280 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:domain

inside_access_in list extended access permitted tcp object 172.31.254.2 any newspaper domain eq

inside_access_in list extended access permitted udp object 172.31.254.2 any newspaper domain eq

Inside_access_in access-list CM000220 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:catch_all

inside_access_in list extended access permitted ip object 172.31.254.2 any newspaper

Inside_access_in access-list CM0000086 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:SSH_internal

inside_access_in list extended access permitted tcp 172.31.254.0 255.255.255.0 interface inside the eq ssh log

Inside_access_in access-list CM0000011 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:PortRange

inside_access_in list extended access allow object TCPPortRange 172.31.254.0 255.255.255.0 host log 192.168.20.91

Inside_access_in access-list CM0000012 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:FTP

access-list extended inside_access_in permitted tcp object inside_range 1024 45000 192.168.20.91 host range eq ftp log

Inside_access_in access-list CM0000088 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:PortRange

inside_access_in access list extended ip 192.168.20.0 255.255.255.0 allow no matter what paper

Inside_access_in access-list CM0000014 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:DropIP

inside_access_in list extended access permitted ip object windowsusageVM any newspaper

inside_access_in list of allowed ip extended access any object testCSM

inside_access_in access list extended ip 172.31.254.0 255.255.255.0 allow no matter what paper

Inside_access_in access-list CM0000065 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:IP

inside_access_in list extended access permit ip host 172.31.254.2 any log

Inside_access_in access-list CM0000658 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security

inside_access_in list extended access permit tcp host 192.168.20.95 any log eq www

In the "show access-list":

access-list inside_access_in line 1 comment CM000067 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:http_access

access-list inside_access_in line 2 Note CM000458 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:https_access

Line note 3 access-list inside_access_in test 11111111111111111111111111 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security

4 extended access-list inside_access_in line allowed tcp host 1.1.1.1 host 192.168.20.86 eq newsletter interval 300 (hitcnt = 0) 81 0x0a 3bacc1

line access list 5 Note CM000260 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:netbios - dgm

line access list 6 Note CM006598 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:netbios - ns

line access list 7 Note CM000220 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:netbios - ssn

line access list 8 Note CM000223 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:tcp / 445

allowed to Access-list inside_access_in line 9 extended tcp 172.31.254.0 255.255.255.0 any interval information eq www journal 300 (hitcnt = 0) 0 x 06 85254 has

allowed to Access-list inside_access_in 10 line extended tcp 172.31.254.0 255.255.255.0 any https eq log of information interval 300 (hitcnt = 0) 0 x7e7ca5a7

allowed for line access list 11 extended udp 172.31.254.0 inside_access_in 255.255.255.0 any netbios-dgm eq log of information interval 300 (hitcn t = 0) 0x02a111af

allowed to Access-list inside_access_in line 12 extended udp 172.31.254.0 255.255.255.0 any netbios-ns eq log of information interval 300 (hitcnt = 0) 0 x 19244261

allowed for line access list 13 extended tcp 172.31.254.0 inside_access_in 255.255.255.0 any netbios-ssn eq log of information interval 300 (hitcn t = 0) 0x0dbff051

allowed to Access-list inside_access_in line 14 extended tcp 172.31.254.0 255.255.255.0 no matter what eq 445 300 (hitcnt = 0) registration information interval 0 x 7 b798b0e

access-list inside_access_in 15 Note CM000280 EXP:1/16/2014 OWN line: IT_Security BZU:Network_Security JST:domain

allowed to Access-list inside_access_in line 16 extended tcp object 172.31.254.2 any interval information journal field eq 300 (hitcnt = 0) 0x6c416 81 b

allowed to Access-list inside_access_in line 16 extended host tcp 172.31.254.2 any interval information journal field eq 300 (hitcnt = 0) 0x6c416 81 b

allowed to Access-list inside_access_in line 17 extended udp object 172.31.254.2 any interval information journal field eq 300 (hitcnt = 0) 227 0xc53bf

allowed to Access-list inside_access_in line 17 extended udp host 172.31.254.2 all interval information journal field eq 300 (hitcnt = 0) 227 0xc53bf

access-list inside_access_in 18 Note CM000220 EXP:1/16/2014 OWN line: IT_Security BZU:Network_Security JST:catch_all

allowed to Access-list inside_access_in line 19 scope ip object 172.31.254.2 no matter what information recording interval 300 (hitcnt = 0) 0xd063707c

allowed to Access-list inside_access_in line 19 scope ip host 172.31.254.2 any which information recording interval 300 (hitcnt = 0) 0xd063707c

access-list inside_access_in line 20 note CM0000086 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:SSH_internal

permit for line access list extended 21 tcp 172.31.254.0 inside_access_in 255.255.255.0 interface inside the eq ssh information recording interval 300 (hitcnt = 0) 0x4951b794

access-list inside_access_in line 22 NOTE CM0000011 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:PortRange

permit for access list 23 inside_access_in line scope object TCPPortRange 172.31.254.0 255.255.255.0 192.168.20.91 host registration information interval 300 (hitcnt = 0) 0x441e6d68

allowed for line access list 23 extended tcp 172.31.254.0 inside_access_in 255.255.255.0 192.168.20.91 host range ftp smtp log information interval 300 (hitcnt = 0) 0x441e6d68

access-list inside_access_in line 24 Note CM0000012 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:FTP

25 extended access-list inside_access_in line allowed tcp object inside_range Beach 1024 45000 host 192.168.20.91 eq ftp interval 300 0xe848acd5 newsletter

allowed for access list 25 extended range tcp 12.89.235.2 inside_access_in line 12.89.235.5 range 1024 45000 host 192.168.20.91 eq ftp interval 300 (hitcnt = 0) newsletter 0xe848acd5

permit for access list 26 inside_access_in line scope ip 192.168.20.0 255.255.255.0 no interval 300 (hitcnt = 0) newsletter 0xb6c1be37

access-list inside_access_in line 27 Note CM0000014 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:DropIP

allowed to Access-list inside_access_in line 28 scope ip object windowsusageVM no matter what information recording interval 300 (hitcnt = 0) 0 x 22170368

allowed to Access-list inside_access_in line 28 scope ip host 172.31.254.250 any which information recording interval 300 (hitcnt = 0) 0 x 22170368

allowed to Access-list inside_access_in line 29 scope ip testCSM any object (hitcnt = 0) 0xa3fcb334

allowed to Access-list inside_access_in line 29 scope ip any host 255.255.255.255 (hitcnt = 0) 0xa3fcb334

permit for access list 30 inside_access_in line scope ip 172.31.254.0 255.255.255.0 no interval 300 (hitcnt = 0) newsletter 0xe361b6ed

access-list inside_access_in line 31 Note CM0000065 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:IP

allowed to Access-list inside_access_in line 32 scope ip host 172.31.254.2 any which information recording interval 300 (hitcnt = 0) 0xed7670e1

access-list inside_access_in line 33 note CM0000658 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security

allowed to Access-list inside_access_in line 34 extended host tcp 192.168.20.95 any interval information eq www 300 newspapers (hitcnt = 0) 0x8d07d70b

There is a comment in the running configuration: (line 26)

Inside_access_in access-list CM0000088 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:PortRange

This comment is missing in 'display the access-list '. In the access list, for all lines after this comment, the line number is more correct. This poses problems when trying to use the line number to insert a new rule.

Everyone knows about this problem before? Is this a known issue? I am happy to provide more information if necessary.

Thanks in advance.

See the version:

Cisco Adaptive Security Appliance Software Version 4,0000 1

Version 7.1 Device Manager (3)

Updated Friday, June 14, 12 and 11:20 by manufacturers

System image file is "disk0: / asa844-1 - k8.bin.

The configuration file to the startup was "startup-config '.

fmciscoasa up to 1 hour 56 minutes

Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor

Internal ATA Compact Flash, 128 MB

BIOS Flash M50FW016 @ 0xfff00000, 2048KB

Hardware encryption device: Cisco ASA-5505 Accelerator Board (revision 0 x 0)

Start firmware: CN1000-MC-BOOT - 2.00

SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.06

Number of Accelerators: 1

Could be linked to the following bug:

CSCtq12090: ACL note line is missing when the object range is set to ACL

The 8.4 fixed (6), so update to a newer version and observe again.

--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni

Cisco ASA &amp; T1 connection

Similar Questions

Is there a way by which we can block all connections from a country on Cisco ASA, without us manually define an ACL.

Maybe you are looking for

Cisco ASA & T1 connection