Disabling one to connect in Cisco ASA
What is the best way to disable anyconnect in Cisco ASA.
Thank you
The best way to disable remote access VPN SSL (most common type by far when using customers Anyconnect) is to disable webvpn ("no webvpn") in set up mode.
Tags: Cisco Security
Similar Questions
-
Hi team
Hope you do well. !!!
currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.
1 users will connect: user advanced browser on SSL VPN pop past username and password.
2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.
3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.
4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.
This is my requirement, so someone please guide me how to set up step by step.
1. how to set up the Radius Server?
2. how to configure CISCO ASA?
Thanks in advance.
Hey Chick,
Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.
http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...
Hope this helps
Knockaert
-
How to disable a site tunnel on cisco asa
Hi all, anyone know how to turn off a vpn site to site tunnel on my asa without deleting?
see you soon
Carl
Carl,
Has made this suggestion to the problem you are looking for?
So is there a particular reason why you ask many qustions and not note or even to say thank you?
-
the Cisco asa vpn processing error payload: payload ID: 1
Hello
I set up vpn L2TP by using ASDM and now I am not able to connect my Cisco ASA 5505.
It is showing the error message
3 July 7, 2011 18:57:38 IP = *. *. *. *, payload processing error: ID payload: 1 Please suggest me how to solve this problem (by using ASDM)
Thank you
Hi Nikhil,
Your config seems incomplete, command 'IPSec l2tp ipsec vpn-tunnel-Protocol' is missing, what is needed to connect L2tp try to reconfigure your firewall using the link:-
http://www.Cisco.com/en/us/customer/docs/security/ASA/asa80/configuration/guide/l2tp_ips.html
Hope this helps,
Parminder Sian
-
disable the cisco ASA connection using only activate password via asdm
Hi all
How to disable the connection to my cisco asa 5520 using only activate password via asdm? I like to asdm connection using the user name and password. TIA!
The command:
aaa authentication http console LOCAL
.. .will be force users accessing to ASDM (which uses transport http (s)) to be authenticated on the LOCAL database.
You can also specify another list of defined authentication method, such as RADIUS, RADIUS or AD. (Although t wew love to leave a LOCAL method on the spot, in which case your external authentication server is not available.)
-
AnyConnect VPN for Cisco ASA 5505 refused connections
I'm trying to set up my Cisco 5505 with AnyConnect VPN client VPN access. Here is the relevant information of my config:
interface Vlan2
mac-address xxxx.xxxx.xxxx
nameif outside
security-level 0
ip address A.A.A.A 255.255.255.240
!
access-list outside_access_in extended permit tcp any host C.C.C.C eq pptp
access-list outside_access_in extended permit tcp any host C.C.C.C eq https
access-list outside_access_in extended permit tcp any host C.C.C.C eq ftp
access-list outside_access_in extended permit tcp any host C.C.C.D eq https
access-list outside_access_in extended permit tcp any host C.C.C.D eq ftp
access-list outside_access_in extended permit tcp any host C.C.C.D eq www
access-list outside_access_in extended permit tcp any host C.C.C.C eq smtp
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any host C.C.C.D eq ssh
access-list outside_access_in extended permit tcp any host C.C.C.D eq 8080
access-list outside_access_in extended permit gre any host C.C.C.C
access-list outside_access_out extended permit ip any any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip any interface outside
access-list inside_access_out extended permit ip any anyaccess-group inside_access_in in interface inside
access-group inside_access_out out interface inside
access-group outside_access_in in interface outside
access-group outside_access_out out interface outsidewebvpn
enable inside
enable outside
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enablegroup-policy DfltGrpPolicy attributes
dns-server value X.X.X.X
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value
address-pools value palm
webvpn
svc rekey time 30
svc rekey method ssl
svc ask enable default webvpnpolicy-map global_policy
class inspection_default
inspect pptp
inspect http
inspect icmp
inspect ftp
!When I try to connect, I get this error in the real-time log viewer:
TCP access denied by ACL from X.X.X.X/57356 to outside:A.A.A.A/443
Here are the details of the license:
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
SSL VPN Peers : 2
Total VPN Peers : 10
Dual ISPs : Disabled
VLAN Trunk Ports : 0
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : DisabledThis platform has a Base license.
Can someone tell me what I am doing wrong or what access list I'm missing?
I have two Cisco ASA 5510 firewall with a similar setup configuration and the AnyConnect SSL VPN works great.
Hi Matt,
You are probably landing on the tunnel-group by default - you will need to indicate which group to connect to the client. This can be done in different ways - I see that you already have a defined group aliases, but to be able to use that you must configure:
WebVPN
tunnel-group-list activate
Alternatively, if you have only a single group, you can add 'group-url https://yourasa.yourcompany.com/ permit' to the webvpn attributes tunnel-group.
HTH
Herbert
-
VPN spans more than two connections WAN on Cisco ASA?
Hello
I have a quick question for you guys, I'm not too sure if you can do it.
Basically, you connect two offices together and need higher bandwidth between sites via VPN. The main site has a leased line and the remote site has a SDSL connection with a secondary line ADSL with another provider, in failover mode.
There is a Cisco ASA 5520 to the master branch and 5510 remotely, with a VPN site-to site between sites. Is it possible to use the command-line failover to increase our bandwidth over the site to site VPN? I mean, it's create a VPN link combined with the two WAN?
DrayTek have a feature on their 2930 series that allows you to perform this VPN called trunk/collage. I was wondering if this is possible on the Cisco ASA? If not, is anyway could I do this with any additional material? I don't want to use the Draytek to the mainsite, obviously because the load he'd probably kill, but I'm not against the use of this on the remote site in front of the ASA.
Thanks in advance.
There is no feature of the ASA that does what you ask, as much as I KNOW.
Depending on your traffic profile, you might be able to hack a solution by creating two VPN site-to-site (one per SDSL) and other agents via ADSL and by applying the cryptomap for a portion of the traffic to one and the rest of the traffic to the other.
-
Cisco has disabled my internet connection I don't have the guest password - I never asked to Cisco
My main computer is a Windows XP, I also have Vista and a laptop with Windows 7, XP is slow, the vista access no internet at all unless I put in some password for comments, that I never went also, I didn't want Cisco and if I did it lacked experience in computer science and an accident. Please help, friends try to help and I lost all my music files and now I can't Netflix Blockbuster or Rhapsody. Help?
Software Cisco Connect think that my internet connection is lost, but it's not. It won't take me any further than that. I would just use the administration of "Advanced" page but I am trying to enter to disable the guest network and for some reason, Cisco made that only configurable from the Cisco Connect software.
-
Discover device directly connected to the cisco ASA
How do I know which is directly connected to an ASA interface? I'm looking for some commands that can be executed on the SAA to find the directly connected Cisco device.
Thank you
Boudou
Unfortunately it is not available on SAA for you tell what device is directly connected to it, there is no 'see the neighboring cdp' on SAA unfortunately.
You can check the ARP table and see which is the next hop, but who would only give the layer 3 device, such that there could be a switch between the two institutions.
-
Cisco ASA, connect an IP address on the OUTSIDE of the VPN remote access
Hello
I tried to find resources on the net but could not find a solution, then post it here. Maybe someone can help.
So the problem is that I'm trying to access a server on the cloud for remote VPN access (cisco asa 5510).
The server on the cloud (54.54.54.54) is only accessible from the outside interface (192.168.11.2) NY Firewall (cisco asa 5510)
I added some ACE for this in the ACL of VPN tunnel to divide.
NY-standard host allowed fw # access - list vpn_remote-customer 54.54.54.54
And I see the road added to my cliet machine after the VPN connection, but still it cannot connect to this server.
The network INTERIOR, I can connect to the server.
Thanks in advance.
Hello
This is most likely a problem with NAT hair/U-turn hairpin.
Will need to see the configurations or you would need to check yourself
I don't know what your version of the Software ASA is to be like who determines what is the format of NAT configuration.
So far, you have confirmed that the ASA VPN configuration provides the VPN Client with the route to the remote server. Then in circulation should be tunnel to the ASA.
Then, you will need to check the output of this command
See the race same-security-traffic
You should see the command in the output below
permit same-security-traffic intra-interface
If you do not, you will need to add it. This effect of controls is to allow traffic to enter an interface and exit through the same interface. In your case this applies to Internet VPN Client traffic to the remote server as it between ' outside ' and spell through the 'outside'.
Then, should ensure that dynamic PAT is configured for the VPN Clients.
8.2 software (and below)
You most likely have a dynamic configuration PAT like that on the firewall, if levels of above running software version
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
In this situation if we wanted to add dynamic PAT for a pool of VPN, we would add
NAT (outside) 1
This would allow users to use the same public IP address as LAN users, when accessing the remote VPN server
Software 8.3 (and above)
Because the NAT configuration format is completely different in the latest software, you could probably just add a new configuration of NAT completely without adding a
network of the VPN-PAT object
subnet
dynamic NAT interface (outdoors, outdoor)
Of course, its possible that there could be some configuration NAT already on the device which could cause problems for this configuration. If this does not work then that we would have to look at the actual configurations on the ASA.
Hope this helps
Let me know how it goes
-Jouni
-
Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network
I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well
Thank you
interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.88.10.254 255.255.255.0
!
interface Management0/0
Shutdown
nameif management
security-level 0
no ip address
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the PAT_to_Outside_ClassA object
10.88.0.0 subnet 255.255.0.0
network of the PAT_to_Outside_ClassB object
subnet 172.16.0.0 255.240.0.0
network of the PAT_to_Outside_ClassC object
Subnet 192.168.0.0 255.255.240.0
network of the LocalNetwork object
10.88.0.0 subnet 255.255.0.0
network of the RemoteNetwork1 object
Subnet 192.168.0.0 255.255.0.0
network of the RemoteNetwork2 object
172.16.10.0 subnet 255.255.255.0
network of the RemoteNetwork3 object
10.86.0.0 subnet 255.255.0.0
network of the RemoteNetwork4 object
10.250.1.0 subnet 255.255.255.0
network of the NatExempt object
10.88.10.0 subnet 255.255.255.0
the Site_to_SiteVPN1 object-group network
object-network 192.168.4.0 255.255.254.0
object-network 172.16.10.0 255.255.255.0
object-network 10.0.0.0 255.0.0.0
outside_access_in deny ip extended access list a whole
inside_access_in of access allowed any ip an extended list
11 extended access-list allow ip 10.250.1.0 255.255.255.0 any
outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1
mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool
NAT static NatExempt NatExempt of the source (indoor, outdoor)
NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2
NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3
NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search
!
network of the PAT_to_Outside_ClassA object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassB object
NAT dynamic interface (indoor, outdoor)
network of the PAT_to_Outside_ClassC object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
dynamic-access-policy-registration DfltAccessPolicy
Sysopt connection timewait
Service resetoutside
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic dynmap 10 set pfs
Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1
life together - the association of security crypto dynamic-map dynmap 10 28800 seconds
Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic dynmap 10 the value reverse-road
card crypto mymap 1 match address outside_1_cryptomap
card crypto mymap 1 set counterpart x.x.x.x
card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1
card crypto mymap 86400 seconds, 1 lifetime of security association set
map mymap 1 set security-association life crypto kilobytes 4608000
map mymap 100-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto ipsec-over-tcp port 10000
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 50
preshared authentication
the Encryption
md5 hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
preshared authentication
aes-256 encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal BACKDOORVPN group policy
BACKDOORVPN group policy attributes
value of VPN-filter 11
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
BH.UK value by default-field
type tunnel-group BACKDOORVPN remote access
attributes global-tunnel-group BACKDOORVPN
address pool Admin_Pool
Group Policy - by default-BACKDOORVPN
IPSec-attributes tunnel-group BACKDOORVPN
IKEv1 pre-shared-key *.
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
Excellent.
Evaluate the useful ticket.
Thank you
Rizwan James
-
move the SSL Cert from one device to another on Cisco ASA
Hi all
Is it possible to have a certificate SSL + key of a cisco asa to another? I hope its possible and if anyone can guide me to fix the documentation that would be perfect.
Thank you
Manish
Hello
This document will do it for you
Check the How to copy one ASA to another SSL certificates
Kind regards
Any other questions... Sure... Be sure to note all my answers.
-
Cisco ASA 5510, ipsec vpn. What address to connect the client to
Hello
It's maybe a stupid question, but I can't find the answer anywhere.
I used the ipsec vpn configuration wizard, I activated the external interface to access ipsec and went through SCW pools of addresses etc. When I try to connect with the cisco vpn client to my address of the external interface (of a remote host) I'm unable to connect. I scanned the interface for open ports, but there is not, I have to allow traffic to ipsec at this interface?
Best regards
Andreas
No, once you have configured the access remote vpn ipsec, it will be automatically activated, and you should be able to connect to the ASA outside the ip address of the interface.
Can you please share the configuration? and also which group name you are trying to access the vpn client?
-
Cisco asa 5505 and centos VPN server connection
Hi all
Please I want to set up a VPN between Cisco asa 5505 and centos server.
Here's my senerio
-------------------------
ASA 5505
Public IP 155.155.155.2
Local NETWORK: 192.168.6.X
CentOS Server
------------------
Public ip address: 155.155.155.6
Thank you guys
Apology, do you mean access remote VPN Client of hundred BONE for Cisco ASA 5505?
If the remote access, here are the sample configuration:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008060f25c.shtml
-
Cisco ASA 5505 site for multiple subnet of the site.
Hello. I need help to configure my cisco asa 5505.
I set up a VPN between two ASA 5505 tunnel
Site 1:
Subnet 192.168.77.0
Site 2:
Have multiple VLANs and now the tunnel goes to vlan400 - 192.168.1.0
What I need help:
Site 1, I need to be able to reach a different virtual LAN on site 2. vlan480 - 192.168.20.0
And 1 site I have to reach 192.168.77.0 subnet of vlan480 - 192.168.20.0
Vlan480 is used for phones. In vlan480, we have a PABX.
Is this possible to do?
Any help would be much appreciated!
Config site 2:
: Saved
:
ASA Version 7.2 (2)
!
ciscoasa hostname
domain default.domain.invalid
activate the password encrypted x
names of
name 192.168.1.250 DomeneServer
name of 192.168.1.10 NotesServer
name 192.168.1.90 Steadyily
name 192.168.1.97 TerminalServer
name 192.168.1.98 eyeshare w8
name 192.168.50.10 w8-print
name 192.168.1.94 w8 - app
name 192.168.1.89 FonnaFlyMedia
!
interface Vlan1
nameif Vlan1
security-level 100
IP 192.168.200.100 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP address 79.x.x.226 255.255.255.224
OSPF cost 10
!
interface Vlan400
nameif vlan400
security-level 100
IP 192.168.1.1 255.255.255.0
OSPF cost 10
!
interface Vlan450
nameif Vlan450
security-level 100
IP 192.168.210.1 255.255.255.0
OSPF cost 10
!
interface Vlan460
nameif Vlan460-SuldalHotell
security-level 100
IP 192.168.2.1 255.255.255.0
OSPF cost 10
!
interface Vlan461
nameif Vlan461-SuldalHotellGjest
security-level 100
address 192.168.3.1 IP 255.255.255.0
OSPF cost 10
!
interface Vlan462
Vlan462-Suldalsposten nameif
security-level 100
192.168.4.1 IP address 255.255.255.0
OSPF cost 10
!
interface Vlan470
nameif vlan470-Kyrkjekontoret
security-level 100
IP 192.168.202.1 255.255.255.0
OSPF cost 10
!
interface Vlan480
nameif vlan480 Telefoni
security-level 100
address 192.168.20.1 255.255.255.0
OSPF cost 10
!
interface Vlan490
nameif Vlan490-QNapBackup
security-level 100
IP 192.168.10.1 255.255.255.0
OSPF cost 10
!
interface Vlan500
nameif Vlan500-HellandBadlands
security-level 100
192.168.30.1 IP address 255.255.255.0
OSPF cost 10
!
interface Vlan510
Vlan510-IsTak nameif
security-level 100
192.168.40.1 IP address 255.255.255.0
OSPF cost 10
!
interface Vlan600
nameif Vlan600-SafeQ
security-level 100
192.168.50.1 IP address 255.255.255.0
OSPF cost 10
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 500
switchport trunk allowed vlan 400,450,460-462,470,480,500,510,600,610
switchport mode trunk
!
interface Ethernet0/3
switchport access vlan 490
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd encrypted x
passive FTP mode
clock timezone WAT 1
DNS server-group DefaultDNS
domain default.domain.invalid
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
Lotus_Notes_Utgaaande tcp service object-group
UT og Frim Notes Description til alle
area of port-object eq
port-object eq ftp
port-object eq www
EQ object of the https port
port-object eq lotusnotes
EQ Port pop3 object
EQ pptp Port object
EQ smtp port object
Lotus_Notes_inn tcp service object-group
Description of the inn og alle til Notes
port-object eq www
port-object eq lotusnotes
EQ Port pop3 object
EQ smtp port object
object-group service Reisebyraa tcp - udp
3702 3702 object-port Beach
5500 5500 object-port Beach
range of object-port 9876 9876
object-group service Remote_Desktop tcp - udp
Description Tilgang til Remote Desktop
3389 3389 port-object range
object-group service Sand_Servicenter_50000 tcp - udp
Description program tilgang til sand service AS
object-port range 50000 50000
VNC_Remote_Admin tcp service object-group
Description Fra ¥ oss til alle
5900 5900 port-object range
object-group service Printer_Accept tcp - udp
9100 9100 port-object range
port-object eq echo
ICMP-type of object-group Echo_Ping
echo ICMP-object
response to echo ICMP-object
object-group service Print tcp
9100 9100 port-object range
FTP_NADA tcp service object-group
Suldalsposten NADA tilgang description
port-object eq ftp
port-object eq ftp - data
Telefonsentral tcp service object-group
Hoftun description
port-object eq ftp
port-object eq ftp - data
port-object eq www
EQ object of the https port
port-object eq telnet
Printer_inn_800 tcp service object-group
Fra 800 thought-out og inn til 400 port 7777 description
range of object-port 7777 7777
Suldalsposten tcp service object-group
Description send av mail hav Mac Mail at - Ã ¥ nrep smtp
EQ Port pop3 object
EQ smtp port object
http2 tcp service object-group
Beach of port-object 81 81
object-group service DMZ_FTP_PASSIVE tcp - udp
55536 56559 object-port Beach
object-group service DMZ_FTP tcp - udp
20 21 object-port Beach
object-group service DMZ_HTTPS tcp - udp
Beach of port-object 443 443
object-group service DMZ_HTTP tcp - udp
8080 8080 port-object range
DNS_Query tcp service object-group
of domain object from the beach
object-group service DUETT_SQL_PORT tcp - udp
Description for a mellom andre og duett Server nett
54659 54659 object-port Beach
outside_access_in of access allowed any ip an extended list
outside_access_out of access allowed any ip an extended list
vlan400_access_in list extended access deny ip any host 149.20.56.34
vlan400_access_in list extended access deny ip any host 149.20.56.32
vlan400_access_in of access allowed any ip an extended list
Vlan450_access_in list extended access deny ip any host 149.20.56.34
Vlan450_access_in list extended access deny ip any host 149.20.56.32
Vlan450_access_in of access allowed any ip an extended list
Vlan460_access_in list extended access deny ip any host 149.20.56.34
Vlan460_access_in list extended access deny ip any host 149.20.56.32
Vlan460_access_in of access allowed any ip an extended list
vlan400_access_out list extended access permit icmp any any Echo_Ping object-group
vlan400_access_out list extended access permit tcp any host NotesServer object-group Lotus_Notes_Utgaaande
vlan400_access_out list extended access permit tcp any host DomeneServer object-group Remote_Desktop
vlan400_access_out list extended access permit tcp any host TerminalServer object-group Remote_Desktop
vlan400_access_out list extended access permit tcp any host http2 object-group Steadyily
vlan400_access_out list extended access permit tcp any host NotesServer object-group Lotus_Notes_inn
vlan400_access_out list extended access permit tcp any host NotesServer object-group Remote_Desktop
vlan400_access_out allowed extended access list tcp any host w8-eyeshare object-group Remote_Desktop
vlan400_access_out allowed extended access list tcp any host w8 - app object-group Remote_Desktop
vlan400_access_out list extended access permit tcp any host FonnaFlyMedia range 8400-8600
vlan400_access_out list extended access permit udp any host FonnaFlyMedia 9000 9001 range
vlan400_access_out list extended access permitted tcp 192.168.4.0 255.255.255.0 host DomeneServer
vlan400_access_out list extended access permitted tcp 192.168.4.0 255.255.255.0 host w8 - app object-group DUETT_SQL_PORT
Vlan500_access_in list extended access deny ip any host 149.20.56.34
Vlan500_access_in list extended access deny ip any host 149.20.56.32
Vlan500_access_in of access allowed any ip an extended list
vlan470_access_in list extended access deny ip any host 149.20.56.34
vlan470_access_in list extended access deny ip any host 149.20.56.32
vlan470_access_in of access allowed any ip an extended list
Vlan490_access_in list extended access deny ip any host 149.20.56.34
Vlan490_access_in list extended access deny ip any host 149.20.56.32
Vlan490_access_in of access allowed any ip an extended list
Vlan450_access_out list extended access permit icmp any any Echo_Ping object-group
Vlan1_access_out of access allowed any ip an extended list
Vlan1_access_out list extended access permit tcp any host w8-print object-group Remote_Desktop
Vlan1_access_out deny ip extended access list a whole
Vlan1_access_out list extended access permit icmp any any echo response
Vlan460_access_out list extended access permit icmp any any Echo_Ping object-group
Vlan490_access_out list extended access permit icmp any any Echo_Ping object-group
Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_FTP
Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_FTP_PASSIVE
Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_HTTPS
Vlan490_access_out list extended access permit tcp any host 192.168.10.10 object-group DMZ_HTTP
Vlan500_access_out list extended access permit icmp any any Echo_Ping object-group
vlan470_access_out list extended access permit icmp any any Echo_Ping object-group
vlan470_access_out list extended access permit tcp any host 192.168.202.10 - group Remote_Desktop object
Vlan510_access_out list extended access permit icmp any any Echo_Ping object-group
vlan480_access_out of access allowed any ip an extended list
Vlan510_access_in of access allowed any ip an extended list
Vlan600_access_in of access allowed any ip an extended list
Vlan600_access_out list extended access permit icmp any one
Vlan600_access_out list extended access permit tcp any host w8-print object-group Remote_Desktop
Vlan600_access_out list extended access permitted tcp 192.168.1.0 255.255.255.0 host w8-printing eq www
Vlan600_access_out list extended access permitted tcp 192.168.202.0 255.255.255.0 host w8-printing eq www
Vlan600_access_out list extended access permitted tcp 192.168.210.0 255.255.255.0 host w8-printing eq www
Vlan600_access_in_1 of access allowed any ip an extended list
Vlan461_access_in of access allowed any ip an extended list
Vlan461_access_out list extended access permit icmp any any Echo_Ping object-group
vlan400_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0
outside_20_cryptomap_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0
outside_20_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.77.0 255.255.255.0
access-list Vlan462-Suldalsposten_access_in extended ip allowed any one
access-list Vlan462-Suldalsposten_access_out extended permit icmp any any echo response
access-list Vlan462-Suldalsposten_access_out_1 extended permit icmp any any echo response
access-list Vlan462-Suldalsposten_access_in_1 extended ip allowed any one
pager lines 24
Enable logging
asdm of logging of information
MTU 1500 Vlan1
Outside 1500 MTU
vlan400 MTU 1500
MTU 1500 Vlan450
MTU 1500 Vlan460-SuldalHotell
MTU 1500 Vlan461-SuldalHotellGjest
vlan470-Kyrkjekontoret MTU 1500
MTU 1500 vlan480-Telefoni
MTU 1500 Vlan490-QNapBackup
MTU 1500 Vlan500-HellandBadlands
MTU 1500 Vlan510-IsTak
MTU 1500 Vlan600-SafeQ
MTU 1500 Vlan462-Suldalsposten
no failover
Monitor-interface Vlan1
interface of the monitor to the outside
the interface of the monitor vlan400
the interface of the monitor Vlan450
the interface of the Vlan460-SuldalHotell monitor
the interface of the Vlan461-SuldalHotellGjest monitor
the interface of the vlan470-Kyrkjekontoret monitor
Monitor-interface vlan480-Telefoni
the interface of the Vlan490-QNapBackup monitor
the interface of the Vlan500-HellandBadlands monitor
Monitor-interface Vlan510-IsTak
Monitor-interface Vlan600-SafeQ
the interface of the monitor Vlan462-Suldalsposten
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 522.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
vlan400_nat0_outbound (vlan400) NAT 0 access list
NAT (vlan400) 1 0.0.0.0 0.0.0.0 dns
NAT (Vlan450) 1 0.0.0.0 0.0.0.0 dns
NAT (Vlan460-SuldalHotell) 1 0.0.0.0 0.0.0.0
NAT (Vlan461-SuldalHotellGjest) 1 0.0.0.0 0.0.0.0
NAT (vlan470-Kyrkjekontoret) 1 0.0.0.0 0.0.0.0
NAT (Vlan490-QNapBackup) 1 0.0.0.0 0.0.0.0 dns
NAT (Vlan500-HellandBadlands) 1 0.0.0.0 0.0.0.0
NAT (Vlan510-IsTak) 1 0.0.0.0 0.0.0.0
NAT (Vlan600-SafeQ) 1 0.0.0.0 0.0.0.0
NAT (Vlan462-Suldalsposten) 1 0.0.0.0 0.0.0.0
static (vlan400, external) 79.x.x.x DomeneServer netmask 255.255.255.255
static (vlan470-Kyrkjekontoret, external) 79.x.x.x 192.168.202.10 netmask 255.255.255.255
static (vlan400, external) 79.x.x.x NotesServer netmask 255.255.255.255 dns
static (vlan400, external) 79.x.x.231 netmask 255.255.255.255 TerminalServer
static (vlan400, external) 79.x.x.234 Steadyily netmask 255.255.255.255
static (vlan400, outside) w8-eyeshare netmask 255.255.255.255 79.x.x.232
static (Vlan490-QNapBackup, external) 79.x.x.233 192.168.10.10 netmask 255.255.255.255 dns
static (Vlan600-SafeQ, external) 79.x.x.235 w8 - print subnet mask 255.255.255.255
static (vlan400, outside) w8 - app netmask 255.255.255.255 79.x.x.236
static (Vlan450, vlan400) 192.168.210.0 192.168.210.0 netmask 255.255.255.0
(Vlan500-HellandBadlands, vlan400) static 192.168.30.0 192.168.30.0 netmask 255.255.255.0
(vlan400, Vlan500-HellandBadlands) static 192.168.1.0 192.168.1.0 netmask 255.255.255.0
(vlan400, Vlan450) static 192.168.1.0 192.168.1.0 netmask 255.255.255.0
static (vlan400, external) 79.x.x.252 FonnaFlyMedia netmask 255.255.255.255
static (Vlan462-Suldalsposten, vlan400) 192.168.4.0 192.168.4.0 netmask 255.255.255.0
static (vlan400, Vlan462-Suldalsposten) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
static (vlan400, Vlan600-SafeQ) 192.168.1.0 192.168.1.0 netmask 255.255.255.0
static (Vlan600-SafeQ, vlan400) 192.168.50.0 192.168.50.0 netmask 255.255.255.0
static (Vlan600-SafeQ, Vlan450) 192.168.50.0 192.168.50.0 netmask 255.255.255.0
static (Vlan600-SafeQ, vlan470-Kyrkjekontoret) 192.168.50.0 192.168.50.0 netmask 255.255.255.0
static (Vlan450, Vlan600-SafeQ) 192.168.210.0 192.168.210.0 netmask 255.255.255.0
static (vlan470-Kyrkjekontoret, Vlan600-SafeQ) 192.168.202.0 192.168.202.0 netmask 255.255.255.0
Access-group interface Vlan1 Vlan1_access_out
Access-group outside_access_in in interface outside
Access-group outside_access_out outside interface
Access-group vlan400_access_in in the vlan400 interface
vlan400_access_out group access to the interface vlan400
Access-group Vlan450_access_in in the Vlan450 interface
Access-group interface Vlan450 Vlan450_access_out
Access-group interface Vlan460-SuldalHotell Vlan460_access_in
Access-group interface Vlan460-SuldalHotell Vlan460_access_out
Access-group interface Vlan461-SuldalHotellGjest Vlan461_access_in
Access-group interface Vlan461-SuldalHotellGjest Vlan461_access_out
Access-group vlan470_access_in in interface vlan470-Kyrkjekontoret
vlan470_access_out access to the interface vlan470-Kyrkjekontoret group
access to the interface vlan480-Telefoni, vlan480_access_out group
Access-group interface Vlan490-QNapBackup Vlan490_access_in
Access-group interface Vlan490-QNapBackup Vlan490_access_out
Access-group interface Vlan500-HellandBadlands Vlan500_access_in
Access-group interface Vlan500-HellandBadlands Vlan500_access_out
Access-group interface Vlan510-IsTak Vlan510_access_in
Access-group interface Vlan510-IsTak Vlan510_access_out
Access-group Vlan600_access_in_1 interface Vlan600-SafeQ
Access-group Vlan600_access_out interface Vlan600-SafeQ
Access-group Vlan462-Suldalsposten_access_in_1 Vlan462-Suldalsposten interface
Access-group Vlan462-Suldalsposten_access_out_1 Vlan462-Suldalsposten interface
Route outside 0.0.0.0 0.0.0.0 79.x.x.225 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
x x encrypted privilege 15 password username
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.210.0 255.255.255.0 Vlan450
http 192.168.200.0 255.255.255.0 Vlan1
http 192.168.1.0 255.255.255.0 vlan400
No snmp server location
No snmp Server contact
SNMP-Server Community public
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
card crypto outside_map 20 match address outside_20_cryptomap_1
card crypto outside_map 20 set pfs
peer set card crypto outside_map 20 62.92.159.137
outside_map crypto 20 card value transform-set ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
ISAKMP crypto enable vlan400
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
tunnel-group 62.92.159.137 type ipsec-l2l
IPSec-attributes tunnel-group 62.92.159.137
pre-shared-key *.
Telnet 192.168.200.0 255.255.255.0 Vlan1
Telnet 192.168.1.0 255.255.255.0 vlan400
Telnet timeout 5
SSH 171.68.225.216 255.255.255.255 outside
SSH timeout 5
Console timeout 0
dhcpd update dns both
!
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan1
!
dhcpd option 6 ip 81.167.36.3 81.167.36.11 outside interface
!
dhcpd address 192.168.1.100 - 192.168.1.225 vlan400
dhcpd option ip 6 DomeneServer 81.167.36.11 interface vlan400
dhcpd option 3 ip 192.168.1.1 interface vlan400
vlan400 enable dhcpd
!
dhcpd address 192.168.210.100 - 192.168.210.200 Vlan450
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan450
dhcpd ip interface 192.168.210.1 option 3 Vlan450
enable Vlan450 dhcpd
!
dhcpd address 192.168.2.100 - 192.168.2.150 Vlan460-SuldalHotell
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan460-SuldalHotell
dhcpd 192.168.2.1 ip interface option 3 Vlan460-SuldalHotell
dhcpd enable Vlan460-SuldalHotell
!
dhcpd address 192.168.3.100 - 192.168.3.200 Vlan461-SuldalHotellGjest
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan461-SuldalHotellGjest
dhcpd ip interface 192.168.3.1 option 3 Vlan461-SuldalHotellGjest
dhcpd enable Vlan461-SuldalHotellGjest
!
dhcpd address 192.168.202.100 - 192.168.202.199 vlan470-Kyrkjekontoret
interface of dhcpd option 3 ip 192.168.202.1 vlan470-Kyrkjekontoret
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan470-Kyrkjekontoret
dhcpd enable vlan470-Kyrkjekontoret
!
dhcpd option 3 192.168.20.1 ip interface vlan480-Telefoni
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface vlan480-Telefoni
!
dhcpd address 192.168.10.80 - 192.168.10.90 Vlan490-QNapBackup
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan490-QNapBackup
dhcpd 192.168.10.1 ip interface option 3 Vlan490-QNapBackup
!
dhcpd address 192.168.30.100 - 192.168.30.199 Vlan500-HellandBadlands
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan500-HellandBadlands
dhcpd ip interface 192.168.30.1 option 3 Vlan500-HellandBadlands
dhcpd enable Vlan500-HellandBadlands
!
dhcpd address 192.168.40.100 - 192.168.40.150 Vlan510-IsTak
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan510-IsTak
dhcpd 3 ip Vlan510-IsTak 192.168.40.1 option interface
Vlan510-IsTak enable dhcpd
!
dhcpd address 192.168.50.150 - 192.168.50.199 Vlan600-SafeQ
dhcpd option 6 ip 81.167.36.3 81.167.36.11 interface Vlan600-SafeQ
Vlan600-SafeQ enable dhcpd
!
dhcpd address 192.168.4.100 - 192.168.4.150 Vlan462-Suldalsposten
interface option 6 ip DomeneServer 81.167.36.11 Vlan462-Suldalsposten dhcpd
interface ip dhcpd option 3 Vlan462-Suldalsposten 192.168.4.1
Vlan462-Suldalsposten enable dhcpd
!
!
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
!
context of prompt hostname
Cryptochecksum:x
: end
Site 1 config:
: Saved
:
ASA Version 7.2 (4)
!
ciscoasa hostname
domain default.domain.invalid
activate the password encrypted x
passwd encrypted x
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.77.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
PPPoE Telenor customer vpdn group
IP address pppoe setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
switchport access vlan 15
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
DNS server-group DefaultDNS
domain default.domain.invalid
outside_access_in list extended access permit icmp any any disable log echo-reply
access extensive list ip 192.168.77.0 outside_1_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0
access extensive list ip 192.168.77.0 inside_nat0_outbound allow 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 524.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
Enable http server
http 192.168.77.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 79.160.252.226
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow inside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.77.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
VPDN group Telenor request dialout pppoe
VPDN group Telenor localname x
VPDN group Telenor ppp authentication chap
VPDN x x local store password username
dhcpd outside auto_config
!
dhcpd address 192.168.77.100 - 192.168.77.130 inside
dhcpd dns 192.168.77.1 on the inside interface
dhcpd option 6 ip 130.67.15.198 193.213.112.4 interface inside
dhcpd allow inside
!
dhcpd option 6 ip 130.67.15.198 193.213.112.4 outside interface
!
tunnel-group 79.160.252.226 type ipsec-l2l
IPSec-attributes tunnel-group 79.160.252.226
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:x
: end
Hello
The addition of a new network to the existing VPN L2L should be a fairly simple process.
Essentially, you need to add the network of the Crypto present ACL configurations "crypto map" . You also need to configure the NAT0 configuration for it in the appropriate interfaces of the SAA. These configurations are all made on both ends of the VPN L2L connection.
Looking at your configurations above it would appear that you need to the following configurations
SITE 1
- We add the new network at the same time the crypto ACL and ACL NAT0
access extensive list ip 192.168.77.0 outside_1_cryptomap allow 255.255.255.0 192.168.20.0 255.255.255.0
access extensive list ip 192.168.77.0 inside_nat0_outbound allow 255.255.255.0 192.168.20.0 255.255.255.0
SITE 2
- We add new ACL crypto network
- We create a new NAT0 configuration for interface Vlan480 because there is no previous NAT0 configuration
outside_20_cryptomap_1 to access extended list ip 192.168.20.0 allow 255.255.255.0 192.168.77.0 255.255.255.0
Comment by VLAN480-NAT0 NAT0 for VPN access-list
access-list VLAN480-NAT0 ip 192.168.20.0 allow 255.255.255.0 192.168.77.0 255.255.255.0
NAT 0 access-list VLAN480-NAT0 (vlan480-Telefoni)
These configurations should pretty much do the trick.
Let me know if it worked
-Jouni
Maybe you are looking for
-
I'm sorry, I don't understand how to use this help page. I don't know what to do. I click on the question of the post and the issue is not validate. Please do your best, you can help me, thank you.
-
How to update my e - 0n add
-
How to open the host RAM space of the Satellite A100-014?
I tried to open the anchoring of the RAM in my computer add another RAM card.I followed the instructions in the manual. I could not open it! There is that a single screw to unscrew? Any information would be helpful thanks.
-
How to set the size of type printer, iPad shipping
-
Printer network disconnected by Win - 7?
I added that a Win PC - 7 XP network works with a shared network printer (HP Officejet Pro L7680), now the XP cannot go to the printer. Impressions are sitting in a queue. I downloaded the fresh drivers from HP for XP, (0), I uninstalled, ran CCleane