Cisco close timeout

Hi all

When a proximity of Cisco device (customer request) left the room where a Cisco Telepresence device,

It seems to take 5 minutes to do this unplug/timeout

Is there a setting within the Cisco Telepresence/application system that reduce this time-out?

Thank you

Kent

Hello Kent,

In CE8 the customer has an option on the touch panel 10 to turn off close to a button if the presentation in the Hall needs confidentiality, this will actually turn off nearby and unplug all the blocks matched until the new enabled.

It s knows that it takes time for the twinning will be lost when you leave the room because of the symbolic exchange. You can read more here:

https://supportforums.Cisco.com/document/12159326/troubleshooting-guide-Cisco-proximity

Manish

Tags: Cisco Support

Similar Questions

  • After the launch and the release of Cisco close Windows loses the functionality of micro.

    If I run the Cisco close Windows application, I lose the microphone feature. I understand from the client accesses the pair with the SX camera microphone.

    But if I left out the functionality of client micro does not. I need to restart my computer for the features come back.

    No reason as to why this is happening?

    This looks like a driver problem. First of all, try to see if you can find a newer audio driver, may also update drivers for related equipment such as the dock and the chipset.

    If this does not help, you can try to see if disabling exclusive mode. If off exclusive mode help the issue, but makes it impossible for you to connect to the codec, check all the settings recording. You may have to disable all effects microphone such as the cancellation of the echo for your card to work without exclusive mode.

    Comments on how you price and information about what hardware you use, would be great if we can help others in your situation as well as possible.

  • Can I only view content via a video call? Not through local presentations?

    Is it possible to display the content on my device, when we're just make a local presentation and not to make a video call?

    Hello

    It s not very clearly what kind of information you want, but from your last comment, it seems you want to view the content on the application of shared Office close to someone else, OK? It is not currently possible on the desktop version. You must use the Cisco close App on your device Pocket for this purpose.

    It seemed the cufflinks and your original question that you just asked if you could share your screen to the camcorder when not in communication. Sorry if I misunderstood you.

    / Magnus

  • Problem of Windows vs Mac OS with socket read/write and LabView

    Hello

    I inherited, multithreaded code, with a singleton that communicates with LabView via few ports/sockets. I don't know (but don't think) mention it in this case multithreading issues, but in case you think there could be a problem. All communications to the LabView through LabView class (instance) singleton.

    When we run the code on the same box of MS Windows XP as the LabView so, it works properly; This means that LabView receives orders and the java receives the results. When we run it on a Windows XP box in another room with another subnet it works fine as well. When we run a Mac OS in the same room/network reader.ready () is not true in the time-out period. (see the line of reader.ready () in the original code).

    Does anyone know why it would work for Windows but not Mac OS?

    A current "guess" what is bad on my part, is that code below (taken out of context, otherwise the position would be really long) needs of some rethinking. Any help/comments/advice on how it is encoded is greatly appreciated.

    Here are the existing code.
    // some declarations.
    long t0, t1;
    long waittime = 5000;
    BufferedReader reader;

    public synchronized void connectCommPort() {
        if (commportconnected != true) {
            try {
                sock = new Socket();
                InetSocketAddress endpoint = new InetSocketAddress(IPaddress, commPort);
                sock.connect(endpoint, 4000); // try to connect with a timeout of 4 seconds.
                reader = new BufferedReader(new InputStreamReader(sock.getInputStream()));
                writer = new PrintWriter(sock.getOutputStream());
                System.out.println("mec: LabV: SUCCESS - network connection to Labview command port succeeded");
                commportconnected = true;
                errorstatus = false;

            } catch (IOException ex) {
                logwriter("LabV: WARNING - network connection to Labview command port failed."+ex.toString());
                System.out.println("mec: LabV: WARNING - network connection to Labview command port failed."+ex.toString());
                commportconnected = false;
                errorstatus = true;
            }
        }
    }


    public synchronized float readpot(int potnumber) {

        String smotor = Integer.toString(potnumber);

        if (potnumber >= 0 && potnumber <= 5) {
            String message = "pot " + smotor;

            connectCommPort();

            if (commportconnected) {
                try {
                    writer.print(message + "\r\n");
                    writer.flush();
                    logwriter("LabV: [sent] " + message);
                    potvalue = potlistener();
                } catch (Exception ex) {
                    System.out.println("mec: Exception while sending command "+ex.getLocalizedMessage());
                }
                disconnectCommPort();
            }
        } else {
            if (potnumber == 7 || potnumber == 6) {
                potvalue = 5.f;
                logwriter("Faked pot reading for potnumber " + potnumber);
            } else {
                logwriter("WARNING: " + potnumber + " is not a valid pot number (must be 0 to 6)");
            }
        }
        return potvalue;
    }

    public synchronized float potlistener() {

        String message = null;
        t0 = System.currentTimeMillis();
        t1 = System.currentTimeMillis();
        boolean donereading = false;
        while ((t1 - t0) < (waittime) & donereading != true) {
            t1 = System.currentTimeMillis();
            try {

                while (reader.ready()) {
                    message = reader.readLine();
                    logwriter("LabV: [received] " + message);
                    if (message.contains(".")) {
                        potvalue = Float.parseFloat(message);
                    }
                    donereading = true;
                }  // close reader-ready-while
            } catch (Exception ex) {
                System.err.println("Exeption in potlistener() "+ex.getLocalizedMessage());
            }
        } // close timeout while loop

        return potvalue;
    }
    In particular, I have readLine() in a loop where I catch the exception if it is not read and just keep trying? What is the "best way" to do?

    Here's what I thought, something like:
            while ( ((t1 - t0) < waittime) && !donereading ) {
            t1 = System.currentTimeMillis();
            try {
                message = reader.readLine();
                logwriter("LabV: [received] " + message);
                if (message.contains(".")) {
                    potvalue = Float.parseFloat(message);
                    donereading = true;
                }
            } catch (Exception ex) {
                System.err.println("Exeption in potlistener() "+ex.getLocalizedMessage());
            }
        } // close timeout while loop

    (a) No, but I would look into the configuration of the network itself rather than the Java code.

    (b) the correct way to enforce a timeout of read is through Socket.setSoTimeout ().

  • Cisco Security Agent cannot close port 135/tcp on Windows hosts

    Hello

    I met with the problem that Cisco Security Agent cannot close port 135/TCP on PC windows (XP or Win7).

    I configured the network access control module to prevent all client/server connections to port tcp/135 of the rule.

    I checked my police using nmap, so this port (TCP/135) 20 minutes shows as filtered and I see connect event monitor on the CSA MC, over the next 20 minutes he see as open and no newspaper doesn't show. (not exact time, then it maybe 30 minutes or 5, this varies)

    Can someone explain how TCP/135 works and it is possible to close it using the CSA?

    Thanks in advance

    There is another question for the same problem on the forums (see: CSA 6.0.2.145 problem with windows firewall 7). I wrote: -.

    "I advanced and tested in the laboratory with winXP and CSA 602-149 (later). I've defined a rule with DENY tcp/135 and ran the nmap and reports of open (wireshark performances to the syn syn - ack). I changed it to a REFUSAL of PRIORITY and now closed nmap reports (wireshark shows restore the syn). Through the CLI, netstat - a watch the pc listening on tcp/135 & disabling the syn CSA Gets the syn - ack response. For me, this means a few flaws. 1: DENY should block tcp135 syn & 2: CSA does not send reset (it needs to be reset). Is it possible to open a TAC case and put my name (mwinnett) in it, and I'll open a defect. »

    Matthew

  • Cisco ips ssh timeout

    Hi team,

    How do I re probes ips cisco for the timeout of ssh connections...

    IPS 4200 versions 7.x running.

    concerning

    Rajesh

    No, they are not, as it is the software that does not allow the configuration of the time-out period.

  • Select the timeout on ASA Cisco Anyconnect VPN

    Hello world

    I use the Cisco Anyconnect VPN client with the ASA 5540 firewall. I need allow a time-out on the VPN clients, so they log off after x hours of inactivity.

    Thank you to

    Best respect

    Hello

    To my understanding of the default timeout value is 30 minutes

    You should be able to change this setting in the "username" configurations (if you use LOCAL AAA on the SAA) or under the configurations of the 'group policy' .

    The command is

    VPN-idle-timeout

    Here is the link of the commands reference

    http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

    -Jouni

  • Cisco WAPP551 cannot reset and timeout error

    I try to go to a WAP551 of Cisco, but gives an error: "the server to 192.168.1.245 takes too long to respond." We have reset it but the problem persists.

    We have 2 WAP551 of Cisco and both have the same problem.

    We are unable to access the configuration.

    * The power supply light is still flashing. Is it normal?

    Hello

    I am happy that it worked.

    In regards to DHCP, the AP is able to pass DHCP from a DHCP server on the network, but the AP itself does not include DHCP.

    You will need to configure a DHCP server in the same network and subnet, then it wil work.

  • How to manage the browser close event and session timeout

    Hello
    In fact, in my page ther is a table with records. If I select a record, it navigates to the next page and the status of the transaction will change
    'ONGOING'. Now, I want to change the status of the operation AGAIN if I close the browser or if the session expires. Please help me.

    Hello

    Words Anand is OK, if you want to access the new page, then you must keep the AM that will keep the data entered in the user interface in the cache of vo. There is no need to manage the State of the transaction.

    Kind regards
    Out Sharma

  • Procedure crashes and closes with ORA-04021: timeout period exceeded while waiting for

    Hello

    I am facing a problem in which calling a procedure in a package hangs in "EXECUTE IMMEDIATE" and after a long time out with ORA-04021: timeout period exceeded while waiting.
    I faced the problem in an existing package. Then, I tried a little test and could reproduce the problem.
    Test script is:
    kallo:DZHLHFC1> cat test.sql

CREATE OR REPLACE PACKAGE BODY timeout_test AS
    PROCEDURE execute_immediate( p_cmd VARCHAR2 );

    PROCEDURE execute_immediate( p_cmd VARCHAR2 ) IS
    BEGIN
        EXECUTE IMMEDIATE p_cmd;
    EXCEPTION
        WHEN OTHERS THEN
            dbms_output.put_line( 'Command failed: '||p_cmd );
            dbms_output.put_line( 'SQL error message is: ' || SQLERRM );
    END;

    PROCEDURE revoke_priv(p_object_name VARCHAR2) IS
        l_cmd VARCHAR2(1000);
    BEGIN
        l_cmd := 'REVOKE EXECUTE ON "TIMEOUT_TEST" FROM "CSG_SUPP_LHOWNER_WRITE"';
        execute_immediate(l_cmd);
    END;

END timeout_test;
/
show err
TIMING START
REVOKE EXECUTE ON "TIMEOUT_TEST" FROM "CSG_SUPP_LHOWNER_WRITE"; -- Check if command is syntactically correct
TIMING SHOW

set serverout on size 100000
TIMING SHOW
exec timeout_test.revoke_priv('TIMEOUT_TEST');
TIMING SHOW
    When it is running, I get after release:
    Package created.

Package body created.

REVOKE EXECUTE ON timeout_test FROM "CSG_SUPP_LHOWNER_WRITE"
*
ERROR at line 1:
ORA-01927: cannot REVOKE privileges you did not grant

Elapsed: 00:00:00.01
Elapsed: 00:00:00.02
Command failed: REVOKE EXECUTE ON "TIMEOUT_TEST" FROM "CSG_SUPP_LHOWNER_WRITE"
SQL error message is: ORA-04021: timeout occurred while waiting to lock object
LHOWNER.TIMEOUT_TEST

PL/SQL procedure successfully completed.

Elapsed: 00:15:03.03
    I did some analysis and conclusions next concluded that it hangs in "EXECUTE IMMEDIATE".
    1 TOAD "browser session" shows the current statement for this session as a course of execution with "EXECUTE IMMEDIATE"
    2. no lock appear in "browser"->"tab locks session."
    3. If I comment "EXECUTE IMMEDIATE", it comes quickly.

    Is - this problem with a programming or an oracle bug?

    Thank you and best regards,
    Hey

    Hello

    I think I found the reason.
    I'm changing the grants on the same package (TIMEOUT_TEST) which I am running.
    If I change object_name in order that it works.

    Kind regards
    Hey

  • Cisco VUSB - Feature Suggestions (and some Questions)

    Hello

    I use with my EA4500 VUSB Cisco router wireless (N900) for my printer (Samsung ML-1915) USB.  It seems that I have had no problems with the installation and configuration with this on my PC Windows 7 games and my OS 10.8 MacBook Air.  But I noticed a few things that I would like to recommend as features to add.  Some of them are also questions, which I couldn't find the option/feature dethrone if so, please let me know where it is (if available).

    -(OS X specific) allow the application to run as one Menu Bar Extra (like DropBox and others).  No need to take place in my Dock when it's always supposed to be running... still have active and easily accessible from the Menu bar would be perfect.

    -If I start a print job in an applicaton, it tries automatically to conenct to the printer via VUSB?  Or should I always open VUSB app and connect manually to the printer before you start the print job?  This could be automated?

    -J' noticed that if a computer is connected via VUSB, that the other computer cannot connect.  Is there a way to run remotely on another computer, if not active?  Or, is it possible to set up a "timeout" If the VUSB connection has been idle for a period (for example, 5 minutes)?

    Otherwise, it seems that it works very well.  Using Hello Windows to print to my old Apple Airport has been a complete pain and never ended up working fully.  Really happy to find a solution that works with my existing printer and is easy to install on Windows and Mac.

    Seems I found the automatic connect/disconnect option.  In the lower left of the main window is two buttons, the left most button is 'Properties' (Alt + P is shortened).  There is a tab for automatic connection, and it seems that it is automatically enabled by default.  It has an option to confirm that the printer Connect Auto can be used... and there is an option on auto-déconnecter the end of the work.

    It is superb.  I don't need a print server, do not have the concerns of several jobs at the same time... just good to know that this feature is available and enabled, so I don't remember opening VUSB whenever I want to print something.

    Now hoping an update for the Mac version to move its icon in the menu bar.

    A recommendation more... I'd like a prompt/WARNING/reminder when I'm clicking 'Close' on the application, as I'm guessing that the VUSB always needs to be active in the status bar to enable this automatic connection to prnter to work.  I keep hitting the X to close (instead of reduce) when I'm checking the settings.

  • AnyConnect Session Timeout issue

    We have some remote users that are not happy with the SSL Connect connection down after close their laptops or lose their wireless for once. I read this question and answer of a Cisco page and I was wondering where the session time-out setting is changed. It's on the network client, software map AnyConnect or ASA firewall?

    Thank you, Pat.

    Q. What is the AnyConnect reconnect behavior?

    A. AnyConnect will attempt to reconnect if the connection is interrupted. This behavior is not configurable and auto. As long as the session on the SAA is still valid, the session will resume if AnyConnect can restore the physical connection.

    Version 2.2 includes a roaming feature that allows AnyConnect reconnect after a sleep of PC. The client will continue to try indefinitely until the head told him he can't reconnect and the client will not immediately RIP into the tunnel when the system goes Standby/Hibernate implementation. For customers who don't want this feature, set the session timeout value low to prevent sleep or resume reconnects.

    And also, for the new AnyConnect profile changes take effect, you will need to reconnect your AnyConnect session if the new policy is pushed to the client.

  • PPTP VPN between clients Windows and Cisco 2921 router

    Hi all!

    I have a problem with PPTP VPN between Windows clients and router Cisco 2921 with permission of RADIUS (IAS). When I try to connect to Cisco 2921 of Windows 7 by using MS-CHAP v2 I get the message 778: it was not possible to verify the identity of the server. Can I use PAP - power is OK. On Windows XP, the same situation.

    Cisco config:

    version 15.0

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    encryption password service

    !

    hostname gw.izmv

    !

    boot-start-marker

    boot-end-marker

    !

    logging buffered 51200 warnings

    !

    AAA new-model

    !

    AAA authentication ppp default local radius group of

    !

    AAA - the id of the joint session

    !

    clock timezone + 002 2

    !

    No ipv6 cef

    IP source-route

    IP cef

    !

    !

    Authenticated MultiLink bundle-name Panel

    !

    Async-bootp Server dns 192.168.192.XX

    VPDN enable

    !

    VPDN-Group 1

    ! PPTP by default VPDN group

    accept-dialin

    Pptp Protocol

    virtual-model 1

    echo tunnel PPTP 10

    tunnel L2TP non-session timeout 15

    PMTU IP

    adjusting IP mtu

    !

    redundancy

    !

    interface Loopback0

    IP 192.168.207.1 255.255.255.0

    !

    !

    interface GigabitEthernet0/0

    Description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE $ 0/0

    IP 192.168.192.XXX 255.255.255.0

    IP 192.168.192.XX 255.255.255.0 secondary

    IP nat inside

    IP virtual-reassembly

    automatic duplex

    automatic speed

    !

    !

    interface GigabitEthernet0/1

    no ip address

    Shutdown

    automatic duplex

    automatic speed

    !

    !

    interface GigabitEthernet0/2

    Description - Inet-

    no ip address

    NAT outside IP

    IP virtual-reassembly

    automatic duplex

    automatic speed

    PPPoE enable global group

    PPPoE-client dial-pool-number 1

    No cdp enable

    !

    !

    interface virtual-Template1

    IP unnumbered Loopback0

    IP mtu 1492

    IP virtual-reassembly

    AutoDetect encapsulation ppp

    by default PPP peer ip address pool

    PPP mppe auto encryption required

    PPP authentication ms-chap-v2

    !

    !

    interface Dialer1

    the negotiated IP address

    NAT outside IP

    IP virtual-reassembly

    encapsulation ppp

    Dialer pool 1

    Dialer-Group 1

    PPP authentication pap callin

    PPP pap sent-username DSLUSERNAME password DSLPASSWORD

    No cdp enable

    !

    !

    IP local pool PPP 192.168.207.200 192.168.207.250

    IP forward-Protocol ND

    !

    !

    overload of IP nat inside source list NAT_ACL interface Dialer1

    IP nat inside source static tcp 192.168.192.XX 25 expandable 25 82.XXX.XXX.XXX

    IP nat inside source static tcp 192.168.192.XX 1352 82.XXX.XXX.XXX 1352 extensible

    IP route 0.0.0.0 0.0.0.0 Dialer1

    !

    NAT_ACL extended IP access list

    deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255

    deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255

    deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255

    deny ip 192.168.192.0 0.0.0.255 192.168.YYY.0 0.0.0.255

    permit tcp 192.168.192.0 0.0.0.255 any eq www

    permit tcp 192.168.192.0 0.0.0.255 any eq 443

    permit tcp 192.168.192.0 0.0.0.255 any eq 1352

    permit tcp host 192.168.192.XX no matter what eq smtp

    permit tcp 192.168.192.0 0.0.0.255 any eq 22

    permit tcp host 192.168.192.XX no matter what eq field

    permit tcp host 192.168.192.XX no matter what eq field

    permit tcp host 192.168.192.XX no matter what eq field

    allowed UDP host 192.168.192.XX matter what eq field

    allowed UDP host 192.168.192.XX matter what eq field

    allowed UDP host 192.168.192.XX matter what eq field

    !

    host 192.168.192.XX auth-port 1645 1646 RADIUS server acct-port

    Server RADIUS IASKEY key

    !

    control plan

    !

    !

    !

    Line con 0

    line to 0

    line vty 0 4

    line vty 5 15

    !

    Scheduler allocate 20000 1000

    end

    Debugging is followed:

    14:47:51.755 on 21 oct: PPP: Alloc context [294C7BC4]

    14:47:51.755 on 21 oct: ppp98 PPP: Phase is

    14:47:51.755 on 21 oct: ppp98 PPP: using AAA Id Unique = 8 b

    14:47:51.755 on 21 oct: ppp98 PPP: permission NOT required

    14:47:51.755 on 21 oct: ppp98 PPP: via vpn, set the direction of the call

    14:47:51.755 on 21 oct: ppp98 PPP: treatment of connection as a callin

    14:47:51.755 on 21 oct: ppp98 PPP: Session Session handle [62] id [98]

    14:47:51.755 on 21 oct: ppp98 TPIF: State of the event [OPEN] [initial check]

    14:47:51.755 on 21 oct: ppp98 PPP LCP: switch to passive mode, State [stopped]

    14:47:53.759 on 21 oct: ppp98 PPP LCP: exit passive mode, State [departure]

    14:47:53.759 on 21 oct: LCP ppp98: O CONFREQ [departure] id 1 len 19

    14:47:53.759 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)

    14:47:53.759 on 21 oct: ppp98 TPIF: AuthProto MS-CHAP-V2 (0x0305C22381)

    14:47:53.759 on 21 oct: ppp98 TPIF: MagicNumber 0xF018D237 (0x0506F018D237)

    14:47:53.759 on 21 oct: ppp98 TPIF: event [UP] State [departure at REQsent]

    14:47:54.351 on 21 oct: ppp98 TPIF: I CONFREQ [REQsent] id 0 len 18

    14:47:54.351 on 21 oct: ppp98 TPIF: MRU 1400 (0 x 01040578)

    14:47:54.351 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E)

    14:47:54.351 on 21 oct: ppp98 TPIF: PFC (0 x 0702)

    14:47:54.351 on 21 oct: ppp98 TPIF: RAC (0 x 0802)

    14:47:54.351 on 21 oct: LCP ppp98: O CONFNAK [REQsent] id 0 len 8

    14:47:54.351 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)

    14:47:54.351 on 21 oct: ppp98 TPIF: State of the event [receive ConfReq-] [REQsent to REQsent]

    14:47:54.751 on 21 oct: ppp98 TPIF: I CONFACK [REQsent] id 1 len 19

    14:47:54.751 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)

    14:47:54.751 on 21 oct: ppp98 TPIF: AuthProto MS-CHAP-V2 (0x0305C22381)

    14:47:54.751 on 21 oct: ppp98 TPIF: MagicNumber 0xF018D237 (0x0506F018D237)

    14:47:54.751 on 21 oct: ppp98 TPIF: State of the event [receive ConfAck] [REQsent to ACKrcvd]

    14:47:54.915 on 21 oct: ppp98 TPIF: I CONFREQ [ACKrcvd] id 1 len 18

    14:47:54.915 on 21 oct: ppp98 TPIF: MRU 1400 (0 x 01040578)

    14:47:54.915 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E)

    14:47:54.915 on 21 oct: ppp98 TPIF: PFC (0 x 0702)

    14:47:54.915 on 21 oct: ppp98 TPIF: RAC (0 x 0802)

    14:47:54.915 on 21 oct: LCP ppp98: O CONFNAK [ACKrcvd] id 1 len 8

    14:47:54.915 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)

    14:47:54.915 on 21 oct: ppp98 TPIF: State of the event [receive ConfReq-] [ACKrcvd to ACKrcvd]

    14:47:55.275 on 21 oct: ppp98 TPIF: I CONFREQ [ACKrcvd] id 2 len 18

    14:47:55.275 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)

    14:47:55.275 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E)

    14:47:55.275 on 21 oct: ppp98 TPIF: PFC (0 x 0702)

    14:47:55.275 on 21 oct: ppp98 TPIF: RAC (0 x 0802)

    14:47:55.275 on 21 oct: LCP ppp98: O CONFACK [ACKrcvd] id 2 len 18

    14:47:55.275 on 21 oct: ppp98 TPIF: MRU 1464 (0x010405B8)

    14:47:55.275 on 21 oct: ppp98 TPIF: MagicNumber 0x2F7C5F7E (0x05062F7C5F7E)

    14:47:55.275 on 21 oct: ppp98 TPIF: PFC (0 x 0702)

    14:47:55.275 on 21 oct: ppp98 TPIF: RAC (0 x 0802)

    14:47:55.275 on 21 oct: ppp98 TPIF: State of the event [receive ConfReq +] [ACKrcvd to open]

    14:47:55.295 on 21 oct: ppp98 PPP: Phase is AUTHENTICATING,

    14:47:55.295 on 21 oct: ppp98 MS-CHAP-V2: O CHALLENGE id 1 len 28 of 'gw.izmv '.

    14:47:55.295 on 21 oct: ppp98 TPIF: State is open

    14:47:55.583 on 21 oct: ppp98 MS-CHAP-V2: I ANSWER id 1 len 71 of "domain\username".

    14:47:55.583 on 21 oct: ppp98 PPP: Phase TRANSFER, tempting with impatience

    14:47:55.583 on 21 oct: ppp98 PPP: Phase is AUTHENTICATING, unauthenticated user

    14:47:55.587 on 21 oct: ppp98 PPP: request sent MSCHAP_V2 LOGIN

    14:47:55.591 on 21 oct: ppp98 PPP: received LOGIN response PASS

    14:47:55.591 on 21 oct: ppp98 PPP AUTHOR: author data NOT available

    14:47:55.591 on 21 oct: ppp98 PPP: Phase TRANSFER, tempting with impatience

    14:47:55.595 on 21 oct: Vi3 PPP: Phase is AUTHENTICATING, authenticated user

    14:47:55.595 on 21 oct: Vi3: given msg No. MS_CHAP_V2

    14:47:55.595 on 21 oct: Vi3 MS-CHAP-V2: SUCCESS O id 1 len 46 msg is "tG @ #QDD @(@B@ (@[email protected]/ ** / @I @:[email protected]/ ** / @@@ EJFDE)).

    14:47:55.595 on 21 oct: Vi3 PPP: Phase is in PLACE

    14:47:55.595 on 21 oct: Vi3 CPIW: protocol configured, start state cf. [original]

    14:47:55.595 on 21 oct: Vi3 CPIW: State of the event [OPEN] [Initial report on startup]

    14:47:55.595 on 21 oct: Vi3 CPIW: O CONFREQ [departure] id 1 len 10

    14:47:55.595 on 21 oct: Vi3 CPIW: address of 192.168.207.1 (0x0306C0A8CF01)

    14:47:55.595 on 21 oct: Vi3 CPIW: event [UP] State [begins to REQsent]

    14:47:55.595 on 21 oct: Vi3 CCP: protocol configured, start state cf. [original]

    14:47:55.595 on 21 oct: Vi3 CCP: State of the event [OPEN] [Initial report on startup]

    14:47:55.595 on 21 oct: Vi3 CCP: O CONFREQ [departure] id 1 len 10

    14:47:55.595 on 21 oct: Vi3 CCP: MS - PPC supported bits 0 x 01000060 (0 x 120601000060)

    14:47:55.595 on 21 oct: Vi3 CCP: event [UP] State [begins to REQsent]

    14:47:55.599 on 21 oct: % LINK-3-UPDOWN: Interface virtual-access.3, changed State to

    14:47:55.603 on 21 oct: % LINEPROTO-5-UPDOWN: Line protocol on Interface virtual-access.3, changed State to

    14:47:56.027 on 21 oct: Vi3 LCP: I have TERMREQ [open] id 3 len 16

    14:47:56.027 on 21 oct: Vi3 LCP: (0x2F7C5F7E003CCD740000030A)

    14:47:56.027 on 21 oct: Vi3 CPIW: event [BOTTOM] State [REQsent on startup]

    14:47:56.027 on 21 oct: Vi3 CPIW: State of event [CLOSE] [begins with initial]

    14:47:56.027 on 21 oct: Vi3 CCP: event [BOTTOM] State [REQsent on startup]

    14:47:56.027 on 21 oct: Vi3 PPP DISC: MPPE required not negotiated

    14:47:56.027 on 21 oct: Vi3 PPP: sending Acct event [low] id [8B]

    14:47:56.027 on 21 oct: Vi3 CCP: State of event [CLOSE] [start with initial]

    14:47:56.027 on 21 oct: Vi3 LCP: O TERMACK [open] id 3 len 4

    14:47:56.027 on 21 oct: Vi3 LCP: event [receive TermReq] State [Open to stop]

    14:47:56.027 on 21 oct: Vi3 PPP: Phase ENDS

    14:47:56.027 on 21 oct: Vi3 LCP: event [CLOSE] [off status of closing]

    14:47:56.675 on 21 oct: Vi3 PPP: block vaccess to be released [0x10]

    14:47:56.675 on 21 oct: Vi3 LCP: event [CLOSE] State [closing closing]

    14:47:56.679 on 21 oct: Vi3 LCP: event [BOTTOM] State [closing on Initial]

    14:47:56.679 on 21 oct: Vi3 PPP: compensation AAA Id Unique = 8 b

    14:47:56.679 on 21 oct: Vi3 PPP: unlocked by [0x10] always locked by 0 x [0]

    14:47:56.679 on 21 oct: Vi3 PPP: free previously blocked vaccess

    14:47:56.679 on 21 oct: Vi3 PPP: Phase is BROKEN

    14:47:56.679 on 21 oct: % LINK-3-UPDOWN: Interface virtual-access.3, changed State to down

    14:47:56.683 on 21 oct: % LINEPROTO-5-UPDOWN: Line protocol on Interface virtual-access.3, state change downstairs

    I'll be very grateful for any useful suggestions

    We had the same problem using MS-CHAP-V2 and 3945 router using IOS 15.2. When you add the same combination of username/password locally it worked fine but it wasn't no of course of the solution. We have solved this problem by adding the following line in the config file:

    AAA authorization network default authenticated if

    This is because Windows 2000 clients require the use of a statement of authorization aaa in the router config. Maybe it was default (and therefore not shown) previous iOS releases.

    Success!

    Wil Schenkeveld

  • Prevention of timeout to trigger

    Hi, I use the 1427 OR with a camera NIR Goodrich 640 x 512.  We use an external source to trigger the camera and the time between two pulses of trigger is sometimes longer than the time-out for the camera (I immediately the value 2000 ms).  I would fix rather a delay of 10 seconds for the camera and I was wondering if there was some funciton of that I could call before calling the imaqGrab function to see if the camera has actually aqcuired a picture and was ready to be "seized."  Thank you!

    @FeralPhys:

    I think you can set the timeout much higher. In fact, we have several projects where the expiration time is set to infinity.

    The question is, how do stop you grabbing, while he is indefinitely stuck waiting and you must stop the application. You can do this by making a loop of parallel execution, which close the session IMAQ if stop condition. After the closure of session IMAQ, IMAQ Grab stops with an error (which you can easily manage).

    We use this approach generally with IMAQdx, but I think that it works with the same way IMAQ.

    V

  • UDP read too Long timeout, Async Custom Dev fail Shutdown

    Hello

    I've got a simple custom UDP for VeriStand receiver device that uses a timed loop. She has an infinite timeout so that I can listen on port constantly. I cancel the deployment every time I cause an error: 307730 Error Message: NI Veristand: one or more asynchronous custom devices did not close properly and has been abandoned by the Veristand engine.

    Does anyone know how to stop the function Read UDP when it expects a package? What's doing VeriStand when she replaces this behavior, for example he closes the network connection, as the unit cancels? The "Stop.vi" of the device model custom runs?

    Similar question for Visa Read with a long time (> 10 s). VeriStand closes the Visa Session? VeriStand just kill the timed loop and leave the rest of the finishing of custom device?

    Please note that if I shorten the timeout to 1 s or less the custom device can cancel the deployment without any problem.

    Thank you

    Brent

    Brent,

    You should have a way to interrupt your UDP activities to check the system status. Open UDP will create the buffer to the data to be received on this port. As long as reading occurs to clear the buffer before too much data overruns the buffer memory capacity, then you should be fine. Leaving a deadline of waiting-1 loop which blocks it is why VeriStand is having to stop the loop.

    You should have a case of time-out period for your operations of UDP/TCP for the periods of low activity in order to check a channel to shut down the device custom.

Maybe you are looking for

  • Why can not download the YouTube app

    I Went to the app store and search YouTube. Clicked on it. Now the usual screen comes up, but instead of the button 'Open' normal, this button is faded as if I can't rely on it. I try anyway, and nothing happens. I try to access YouTube from the inte

  • Change the inventory on a T430i number.

    I tried the following applications: Using the latest bios package: winflash32.exe - patch - dat ''. winflash32.exe - patch - dpc ''. These say they write in the BIOS and reboot the PC, but no settings are actually saved. With the help of the WinAIAPa

  • What is the largest usable by the "FLARE" microsdhc card?

    I know other mp3 players or phone can only extend to 4 GB or more, is there a limit to the size of the microsd card that can handle the "rocket"?

  • Management Console - mmc - will not work

    for example: click here to open the Device Manager: MMC.exe - pop up says unidentified editor - I select 'Allow' and get the message that MMC has stopped working. Tried safe mode and the clean boot.  No change. How can I get mmc to work again?

  • Problem installing Client AnyConnect Secure Mobility Client 3.0.3054

    Hi all This is my first post and I hope that someone can help me with my problem.I'm trying to install the Client AnyConnect Secure Mobility Client 3.0.3054 on my PC (Windows 7 Professional 32 - bit operating system) andI get the following errors. Ca