Cisco DX80 off nearby after the configuration backup

Similar Questions

• Why I do not have a button "nearby", after the upgrade to watch OS 2.2

  Why I do not have a button "nearby", after the upgrade to watch OS 2.2

  If you are referring to the card program, I have this button on my screen.

  

• No there is no way to turn off or disable the Configuration of Protection in IE11, Win 7? Or enable Java?

  No there is no way to turn off or disable the Configuration of Protection in IE11, Win 7?  Or enable Java with IE on?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  Internet Explorer enhanced security configuration allows you to adjust the security levels for the existing security zones in Internet Explorer. It helps to reduce exposure to possible future security threats.

  Note: Turning off this feature can make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this task but are providing this information so that you can implement this workaround at your own discretion solution. This feature is at your own risk.

  Greater compatibility of add-on from Protected Mode

  Follow this article for help to enable Java.

  How to enable JavaScript in a web browser?

  Hope this information is useful. Thanks for posting for further assistance, we'll be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• Apply the bow logs after the full backup

  DB version: 10 gr 2
  
  
  NOCATALOG mode, I'll take a full backup (hot) DBx (800 GB) using the command

  run {
  allocate channel c1 TYPE DISK connect 'sys/dempo'  FORMAT   '/u04/bkp/stprod_%U.rbk';
  backup as compressed backupset database tag 'full'  plus archivelog; 
  }

  and restore it in DBy.
  But how do I apply archive logs generated dbx during the full backup after the full backup?
  The restored control file does not have these archived logs. Right?

  But the control file which will be restored isn't aware of these new logs archived 5

  Take an another controlfile after the log backups backup archive 5.

  However, you can also CATALOG (search for documentation of RMAN for the "CATALOG" as a command RMAN) backup archivelog items 'Add' in the backup controlfile preceded.

  Hemant K Collette

• switch after the hot backup log file

  Hello world
  Why should we change log file after the end of the backup command that is to say, after the end of the backup hot?
  Why we should take a backup control files to database level, but not through operating system level that is to say, order cp?

  Why we should take a backup control files to database level, but not through operating system level that is to say, order cp?

  If you're doing a cold backup, this is where you use cp.

  But when the database is in place, controlfile is used and it is continuing to change the oracle process. Now the question is how to get the consistent image of the controlfile, here's where you their support at the database level (for example backup controlfile). When you do that level database, a snapshot file is created time and she is saved.

  HTH

• hot to turn off Java after the startup message

  Hello world

  I know it's a bit old, but I couldn't find an answer to it, or maybe I searched the wrong topic. After the reboot, I still get this warning window saying "to use the"java"command line tool, you need to install a JDK.
  I ElCapitan and recommended Java installed since Mavericks version, but the message never goes away. The used warning window is displayed only after restart, but now he appears randomly during normal use of the laptop.

  Please help me to get rid of

  You have software that requires the Java command line tool? It is only in the JDK you will find Oracle's Web site.

  Check your/Library/LauchAgents and /LibraryLaunchDaemons for startup like facebook or similar items. Also, check your user settings (users & groups) under your Log - In for Autostart-software items after the connection.

• Dual Wan router inaccessible RV042G after the configuration management of bandwidth

  Hello

  I bought a router of RV042G a few days ago to manage 2 lines adsl at my home. Everything works fine except for one thing: I can't configure bandwidth management. When I go into the menu "Bandwidth management", "Type of bandwidth management" then I choose the frequency control or priority and I have a had a few rules to prioritize the http protocol, for example, then I click the button Save. After a few seconds of internet use I loss the router and internet connectivity and 192.168.1.1 became inaccessible Ping. I had to unplung the power cord to restart the router, the same problem persists until I have remove all the rules! A few times I even had to do a factory reset because my adsl modem is inaccessible behind the router (impossible to do a ping to the gateway).

  What can I do? There is a known issue on this router and firmware? I have:

  Serial number:		NKS16220141	Firmware version:	v4.2.1.02 (January 18, 2012 14:10:55)
  VID PID:		RV042G V01	The firmware MD5 checksum:	a9817f2dbdcbd6a5c109eaa21b1c3545
  LAN			Working mode:	Entry door

  Thanks for your help.

  Could Pascal you please make a backup configuration file.

  Then I would you at the factory to reset the router then once he comes back to the top, login, make your internet work and try the management of bandwidth again without any other configuration. See if it has the same problem.

  If not then this would imply some there is a configuration in conflict with the previous establishment or a software defect that has been corrected through the reset.

  -Tom
  Please mark replied messages useful

• Problem wireless on my HP DM4 1024tx button - it remains OFF (orange) after the installation of Windows 8 CP

  The wireless button was working normally on my HP DM4 1024TX but a few days ago, I installed Windows8 overview consumer since, then the button wireless OFF rest (orange) and no little matter how many times I press on / reboot/reinstall drivers/reinstall the operating system. Any body please help!

  After a lot of House work, I was able able to solve the problem by myself.

  The Solution is:

  1 remove the battery.

  2. remove the memory card Panel.

  3. remove the black and white wires wireless, stay for a minute and keep returning.

  4. remove the CMOS battery, stay 10 dry and keep it back.

  5. keep the Panel memory card and the battery into the slot.

  Start the laptop normally, Voila it worked

• Reboot loop after the configuration of the Windows updates

  original title: configuration to update windows, remains at 0% then restarts vista, now stuck in an endless loop, I can't break out of.

  my system is set up as a dual boot... my being main vista home...

  the other day I did my update systematic of windows Vista, everything went well...

  you had to do a reboot to complete the updates. everything went as usual...

  Therefore, curiosity had me look at the optional updates available on the update page, one of them being a graphic driver for my card, I chose that and 2 other small...

  to restart, I received the message "update configuration"...

  Updates 1 & 2 set up, but on the update 3 of 3, he remained on 0% complete... after a minute or 2, just rebooted system... I thought "seems normal.

  However, the reboot, it is came with, configuration of update 3/3, stayed on 0%, then restarted once more...

  It will not be completed, it maintains simply browse the updated 3/restart cycle configuration...

  I tried to boot from a system medion recovery disk, I tried checking a problem to statup, he reported none found...

  I tried a system restore, it had only one, just before the updates, but on trials, all just by me again at the beginning of the update configuration 1 part 3, ending with the update 3 do a repeat of the cycle above...

  I tried a chkdsk /f /r on my vista to boot from my recovery disc... it took forever because it was a 1000 GB drive, but no problem detected...

  is there any way I can get out of this endless configure update/restart loop as I don't want to do a complete vista reinstall from my recovery disc

  Once you have started with the Vista DVD / disque disk recovery, select Service Options, and then select command prompt (no admin password needed in this way)

  Now type:

  C: (or any directory of your system files are located)

  CD windows/winsxs
  del pending.xml

  Then close and restart.  I hope that the problem will be solved.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows backup will not accept a new drive after the 2nd backup drive

  Windows Vista Ultimate Edition. Windows backup will not pass make the 2nd drive. Error: insert - % 2 serial number of volume in drive %1 %3.

  (0 x 80070022) . He is the 3rd disc shaped and then gives me this error. This computer broke down twice before after hibernation. Boss will switch to

  Windows 7 and is upset. He leans on Mac.

  Thanks, Terry

  I don't have a solution to your problem of "dvd".
  I have a suggestion:
  Forget to take the backup of files with dvds.
  Buy an external hard drive and use it for backups of files.

  A hard disk of 1 TB post can be had less than $100, to the Canada. The United States will be even less.

  Thanks to the external hard drive for backups of files, you don't have to sit by the computer and feed it with DVD whenever he asks. You can walk away. The computer will do its thing without you.

  A 2 x 4 in box will store all your files. No DVD more formatting. No more marking each dvd. No stacks more DVD.

• How to make a backup after the initial backup on CD?

  I backed up the files on CD.  Now after that I added or changed files, how can I save so that only files that are added or modified are saved?  It was then that not every file is saved again.

  Hello

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• After the Configuration of the effects error: 16

  Hai ppl. I have After Effects cs6, and suddenly, I got an error saying to uninstall and reinstall after effects... Now, I have tried this but also, then I got an installation error... I don't think I remember the error code. It said to restart my computer. Yes, it did NOTHING! I don't know what to do! I am so angry right now ;/ any help? Please, I beg you! I LOVED AFTER EFFECTS! Oh and PS I have Windows 8 so it might be a little more difficult to understand.

  ~ Melissa

  Please follow the steps in the KB Document: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

• iPhone 6 won't restart after the iTunes backup restore

  Recently, I've restored my phone to pick up things that have been deleted. He made through the restore on the computer then it said to wait for iPhone restart but it has not restarted. should I let him sit and wait or what? I need a phone that I am traveling out of State tomorrow morning

  A DFU restore usually recover the phone:

  • Install the latest version of iTunes on your computer, if it is already there ((you must have Windows 7 or later or OS X 10.8.5 version or later version)
  • Restart your computer
  • Disable any antivirus and firewall
  • Launch iTunes
  • Connect the cable of the device to a USB port on the computer (not a USB hub), but DO NOT CONNECT to the DEVICE AGAIN
  • Press in and hold the HOME and SLEEP at the same time for 10 seconds exactly, buttons until the screen goes black, then release the SLEEP button but continue holding the HOME button. If the Apple logo appears then that now the two buttons, you who was held for too long; start over.
  • While holding down the button HOME connect the other end of the cable to the device
  • You should see a message in iTunes saying there were a phone in recovery mode (it can take up to a minute for the message appears). When you see this message release the HOME button and the device must be restored. When asked DO NOT restore a backup. set up as a new phone.

  Try several times, if this does not work the first time; It is difficult to do in DFU mode.

• To use Robocopy to copy files, but you will notice that after the initial backup, it ignores the unchanged files, but I don't want it!

  Hello

  I use robocopy in Windows Server 2008 R2 operating system.

  Here #1

  I would like to use Robocopy to copy a disc (z) files on an external drive (f) and want to "full backup" every time regardless of whether the files have been modified.

  How do I do that?

  I tried to use the command

  Robocopy z:\ketchup f:\ketchup/e

  It works very well if there is nothing in this record, but once the initial order has been executed. It will skip all files of unchaged but I want yet it backs up to the top anyway.

  Want to #2

  I would like also to add a unique name that includes the date and time I'm it backup (in essense a new backup folder name that contains the date and time).  Hoping to place it under scheduled tasks as soon as I get going.

  Thank you

  Jess

  Hi Jess,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on Microsoft Windows Server public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• where did bookmark.htm located after the system backup and restore?

  My drive hard was not so much the system windows vista backup and restore function told me to back up what I did on an external hard drive.  Reference Dell comes to replace the hard drive, so now I want to recover my old internet favorite Solution Explorer (no, I never exported bookmarks to an html file - stupid, I know).  were the bookmarks or somwhere bookmark.htm file on my external hard drive and can I somehow get back them?

  Favorites are stored in files URL - a favorite in a file. Search for your
  hard drive for them. Type in a command prompt (type in search of start command
  Make the box then right click and choose Run as administrator)
   
  dir c:\*.url/a/s
   
  --
  ..
  --
  "surfdude67" wrote in message news: bf66c6b5-714 b-40ae-93fb-0210bcedd95b...
  > my hard drive wasn't so much the windows vista backup and restore system
  > service told me to back up what I did for an external hard
  > by car. Reference Dell comes to replace the hard drive, so now I want to recover my
  > old favorites to the internet Explorer (no, I never exported bookmarks to a
  (> html file - stupid, I know). were the bookmarks or the bookmark.htm file
  > saved somwhere on my external hard drive and can I somehow get back them?