Cisco ISE 1.4 comments account Backup

Similar Questions

• Cisco ISE comments settings problem

  Hi all

  I hope that it will be a miracle.

  I'm unable to remove the San Jose of positions in the settings of comments with the following error ' cannot delete locations: San Jose: location referenced by another configuration. I have attached the parameters and error of reference.

  I checked all the settings in the comments tab and deleted any reference to San Jose, except if it is referenced in the configuration wizard which I wasn't involved in where else this could be referenced and how to remove it please? It is only cosmetic, but to create guest accounts it is frustrating, as shows the San Jose location when they are in fact located in the United Kingdom. I'm under Cisco ISE version 1.3.

  Thank you

  Mark

  It's a bug

  CSCus25245
  Description
  Symptom:
  In point 1.3 of the ISE, under settings - > location and SSID, we cannot delete the default location of San Jose.

  We get the error that it is referenced by another object.

  Conditions:
  ISE 1.3 - seek to remove the default location of San Jose.

• Cisco ISE comments Sponsor Isssue Portal

  Hi all

  We have insatalled 5 boxes of ise 3315 IOS 1.0.4 in our network where in two of them are admin node, two services strategy and has a node mnt. We using sponsor portal for guest user wirless comments where we integrated WLC 5508 with ise and using weblogin for guest users.

  We have created open ssid wlc and external aid redirected url to ise for the login page of comments.

  But when we create a guest in the sponsor for guest user connection, user that we faced after publication

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection.

  Can us guest login successful after comments connect to the portal of reviews or redirect any other link as google.com for guest user will be done the knowledge he is able to access the internet now

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user.

  Can someone help me resolved on observation about covers them cisco ise comments sponsor Portal

  Thank you & best regards

  Pranav Gade

  Pranav your answers are online,

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection. When you use CWA (Central web authentication) there is no way we can redirect users by using the redirect url because it will always redirect users for each time they start a web request. There is no other cost functionality that will remove this condition because they have already been authenticated.  Here is a guide that explains the user experience when using web Central auth -

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/user_guide/ise_guest_pol.html#wp1296954

  Can us guest login successful after login guest Portal comments or redirect any other link as google.com for guest user will be acquainted with it is able to access the internet now This is not possible, you can change the verbage and force the AUP to be displayed to users informing them that they can start their web request after hitting the button I accept.

  Here's to justify it experience, once users go through the process of reviews-

  http://www.Cisco.com/en/us/products/ps11640/products_configuration_example09186a0080ba6514.shtml#final

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user. Check advance timer on your SSID you can be hitting the session on the WLC timeout. Please disable this option and let the functionality of COA ISE at expiration of the user on the controller sessions of.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Cisco ISE comments Portal - DNS problem - External area

  Hello

  I have a client that has the following sceanrio:

  In a wireless deployment and deployment Cisco ISE 1.1.3 with CWA, when the wireless client receives the URL ISE redictect (URL to access the portal of ISE comments), this URL is based on the ISE DNS name, not on its IP address. Thus, the PC cannot solve this problem by DNS name because there is no DNS in the external area (for the guets) or by using the addresses of servers DNS ISP provided by the DHCP server, and therefore it cannot access the portal comments at all;

  I know that in an attempt to manually code the IP address - it doesn't (IE in the authorization profile CWA, the equivalent URL redirection via the pair av CISCO as follows:)

  Cisco-AV-Paire = redirect url =https://10.10.10.10:8443/guestportal/gateway? sessionId = sessionIdValue & action = cwa,)

  given that the sessionIdValue variable is not replaced by its real value when sending to the wireless client)

  My question is: this question has been addressed in version 1.2 of Cisco of ISE - has anyone tried it if has been processed? If not in Cisco 1.2 - does anyone know iof this feature will become available?

  Thanks in advance for your answers.

  Robert C.

  Robert,

  Manual assignment has been made available in version 1.2 of the ISE.

  M.

  

• Upgrade to Cisco ISE

  Hello

  I have cisco ISE 1.0, which I want to spend 1.3 ISE. According to the upgrade path, I would need to follow this process

  1.0 > 1.1 (apply the latest patch) 1.2 > 1.3

  The bundle 1.0 to 1.1 is deferred. So I think to install a new 1.3 ISE as a virtual appliance and then configure it from there. I have not too clued up on ISE so I was wondering is there a way to backup on ISE 1.0 and 1.3 restoration?

  If this is not the case, what would be the best approach?

  Thank you

  Wow 1.0 to 1.4 is a big leap in functionality. You run this in your production network?

  Authentication and authorization should continue to work that you have configured the.

  On the top of my head

  -you come on duty return to the AD domain (if you have joined in the first place). Make sure you have the credentials of the service account to do.

  -Comments and other portals have been completely redesigned. If you have made any customizations, you're probably better it demolition and reconstruction by using the new tools of the portal generator.

  -Depending on whether you have advanced Base 1.0 licenses will take you through basic or Apex with 1.3 / 1.4.

  -ISE has a ton of other features that may or may not apply in your environment.

• Cisco ISE 1.1.2.145 Admin authentication via the LDAP protocol

  I have configured the LDAP protocol and able to retrieve our LDAP directory structure. Now, I'm trying to point authentication "Admin Access" Source 'External identity', which is the new LDAP IS I created. But I couldn't find an option to authenticate locally if for some reason the LDAP configuration does not work. I learned that the ISE can automatically return to local auth as external sources Idenitity are inaccessible. How can I test the LDAP authentication with breaking them our Admin Access? I thought to open two parallel sessions, one with Super Admin account Local and one with the domain account. But I noticed that ISE communication is smart enough for the closing session/connection no matter what other sessions in different browsers so, basically, I can't open two parallel sessions the same machine to test. Suggestions? or am I missing something here?

  Thanks in advance.

  Hi Srinivas,

  Even if you configure LDAP as a source of external identity of admin access, you can always internal relief without having locked. According to the ISE user guide:

  During the operation, Cisco ISE is designed to "fall back" and try to perform the internal identity database authentication, if the communication with the external identity store has not been established, or if it fails. In addition, whenever an administrator for which you have configured external authentication launches a browser and initiates a logon session, the administrator must still the option authentication of demand through the local Cisco ISE database by choosing 'Internal' to the Selector drop-down storage of identity in the Connect dialog box.

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/user_guide/ise_man_identities.html#wp1351543

  Please see the attached screenshot by my lab ISE:

  

  I configured the admin authentication against AD, but I still see both 'Internal' and 'AD' at the time of the connection.

  I hope this helps.

  Thank you

  Aastha

• Cisco ISE (Identity Services Engine) - seeds SGA device?

  Hello

  We have a LAB with Cisco ISE, certificates and list DACL. Everything works fine with the 1.1.1 version but now we want to use the functionality of CMS - SGT instead of the ACL and we found that we need seed for this device and the only device that takes in charge the Nexus 7000 is. Is this true? What is the only way that we can use LMS - SGT? Are there plans that any other device will be used to seed device?

  BR, Marko

  The device of seed set as first device that communicates with the ISE. It must be a link.

  http://www.Cisco.com/en/us/docs/solutions/enterprise/security/TrustSec_2.0/trustsec_2.0_dig.PDF

  In addition the Nexus needs a license of Advanced Services installed in order to support the Trustsec.

  I can't comment on any future plans.

• Cisco ISE 1.3 disable "Identity Resolve" step?

  Currently, I am working for a client with a Cisco ISE 1.3 deployment.

  The Cisco access point are currently authenticated by MAB, the customer wants to improve that I proposed to implement EAP-FAST speed of the MAB for the AP for a quick and easy solution.

  I work in the test and production environment, but I was cycling through the authentication process and found something strange.

  I created a rule that if the Tunnel network protocol is EAP-FAST are authenticated by internal users.

  It works very well, the ISE recognizes the flow and internal users through authenticatie.

  15041 assessment political identity
  15048 questioned PIP - Network Access.EapAuthentication
  15048 questioned PIP - Network Access.EapTunnel
  15004 Matched rule - EAP-FAST
  15013 selected identity Source - internal users
  24210 Looking user in IDStore of internal users - >
  24212 found user in internal users IDStore
  Authentication 22037 spent

  On the way he also decided to search for the user in Active Directory.

  Given that the user has not been created in Active Directory, that it does not.

  Looking 24432 user in Active Directory - >
  Identity resolution 24325 - >
  Search 24313 of corresponding accounts at the junction - >
  24318 no corresponding account found in the forest - >
  24322 identity resolution detected no corresponding case
  Failure of the 24352 - ERROR_NO_SUCH_USER identity resolution
  24412 not found user in Active Directory - >
  15048 questioned PIP - >. ExternalGroups
  15048 questioned PIP - Network Access.EapTunnel
  15004 Matched rule - AP_EAPFAST
  15016 selected the authorization - AP_Lan profile
  11002 returned access RADIUS acceptance

  So the authentication and authorization is successful but he try's to resolve the user in active directory.

  I checked the authentication for MAB process, and here I see the same error.

  The MAC address of the device used to MAB also is added to the ISE, then authentication through internal users, authentication and authorization is successful, but ISE wants to solve the (MAC address of the device) user in Active Directory.

  We also see this step for the flow of EAP - TLS, and in this case the identity stage via resolution is successful.

  Is it possible that I can disable the resolution of identity through AD when the internal user group? (or in the world?)

  I did some research and found this (search for LDAP users)

  http://www.Cisco.com/en/us/docs/security/ISE/1.0/user_guide/ise10_man_id...

  When I look at our deployment, it is nothing configured under LDAP.

  If you have rules in your authorization rules that use ad groups that are in front of your MAB or the EAP-FAST rules, ISE will do a search to see if it needs to match this rule. Put your MAB and EAP-FAST rules about AD membership rules, and it won't do the research.

• Cisco Ise 1.3 with Flex to connect wireless supported function

  Hello

  My environment is formed ROUND of flex-mode connection wireless and cisco Ise 1.3, these features are supported?
  Basic functions of the AAA
  profiling
  posturing
  Substitution VLAN
  Substitution of the ACL
  Comments commissioning

  TrustSec 2.0 this MDC is not supported? someone try this feature?

  These all work with ISE 1.3 and FlexConnect WLAN.

  You need the right license ISE - the type of mobility (wireless) license will cover everything. If you have wired and wireless, then you must have basic (for most features) + more (for profiling) + Apex (for Posturing).

• Cisco ISE 1.3 question Active Directory

  Hi people

  I'm having a problem with our Cisco ISE and would love some comments or a solution. I configured to ISE to use our Active Directory setup and so far it seems to be functional. I could connect to retrieve ad groups and use AD for authentication. The problem I encounter is that when I try to go to the ' Administration > Identity Management > Sources external page and select our instance AD in the window side left hand screen hangs and won't load.  Any advice?

  ad_error.PNG

  

  You are using a supported browser and have you tried an alternative one?

  If you are using a supported browser, it looks like a bug in the layout of the page. I was opening, in this case, a case of TAC. I had this same work of page very well for me in the three different 1.3 deployments.

• Session of endpoint on Cisco ISE 2.1

  Hello

  I installed 2.1 ISE with patch 1.

  I have a question about the session on Cisco ISE calendar.

  If a n receives an Access_Accept message for an endpoint, ISE installs a session that is visible on the Live session section.

  If endpoint disconnects from the network, which is the time-out for this session?

  Is it possible to set this timer?

  I try to put an end to the session with the CoA on Live Session Action, but this action fails because my switch does not support cost.

  So I reboot Cisco ISE and after its reloading, the session is deleted.

  In a case that it is not possible to use the feature of 'end', is it possible to delete the session in some other way?

  Thanks in advance

  Antonio

  Hi Antonio,.

  • Completed sessions are cleaned up 15 minutes after the end.
  • If there are authentication, but no accounting, these sessions are deleted after an hour.
  • All idle sessions are cleaned after seven days.

  But your n should send account opening and stop the message for the best operation.

  For the manual uninstall, you can use under method as shown in the link I pasted. You can consult the section "withdrawal embusked sessions.

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-4/api_ref_guide/API _...

  Also, you might be interested in the discussion below:

  https://communities.Cisco.com/thread/61587?start=0&TSTART=0

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• Cisco ISE profiling - Split-Corporate/guest access

  Hi all

  I currently deploying a Cisco ISE for my wireless network and I would like to divide my WLAN in two different "authorisation profile": comments and Corporate.

  For now, I use my active Directory to authenticate users and profiling to authorize the device with the host name. I would like to sort by domain name with DHCP probe but I can't because there is always an answer of DHCP message with the domain given by the DHCP server, you have a solution to separate unit with domain name or other attributes?

  Thanks in advance for your answer!

  You can create different authorization profile based on the identity group they belong to, therefore, make two profiles based on two membership group (guests / corporate AD users) and assign them different access. consult the ISE 1.2 config guide.

• Cisco ISE 1.2 and the ad group

  Hello

  I have Cisco ISE installed on my EXSi server for my test pilot. I added several ad groups at ISE as well.

  I created a condition of authorization policy, that is WIRELESS_DOT1X_USERS (see screenshot)
  Basically, I just replicate the default Wireless_802.1X and added Network Access: EapAuthentication, Equals, EAP - TLS.

  My problem is, I have been unable to join the wireless network, if I added my ad group to the authorization strategy (see screenshot). The user I is a member of WLAN USERS. If I removed the authorization policy group, the use is able to join the wireless network.

  I have attached the screenshot of ISE newspapers as well. I checked the ISE, AD/NPS, WLC, laptop computer time and date, and they are all in sync.

  I also have the WLC added as NPS client on my network.

  I checked the newspaper AD and I found it, it was the local management user WLCs trying to authenticate. It is supposed to be my wireless user Credential is not the WLC.

  It's the paper I received from the AD/NPS

  Access denied to user network policy server.

  Contact the server administrator to strategy network for more information.

  User:

  Security ID: NULL SID

  Account name: admin

  Domain account: AAENG

  Account name: AAENG\admin

  Client computer:

  Security ID: NULL SID

  Account name: -.

  Full account name: -.

  OS version: -.

  Called Station identifier: -.

  Calling the Station identifier: -.

  NAS:

  NAS IPv4 address: 172.28.255.42

  NAS IPv6 address: -.

  NAS identifier: RK3W5508-01

  NAS Port Type: -.

  NAS Port:                              -

  RADIUS client:

  Friendly name of client: RK3W5508-01

  The client IP address: 172.28.255.42

  Information about authentication:

  Connection request policy name: Windows authentication for all users use

  The network policy name: -.

  Authentication provider: Windows

  Authentication server: WIN - RSTMIMB7F45.aaeng.local

  Authentication type: PAP

  EAP Type:                              -

  Identifier for account: -.

  Results of logging: Accounting Information was written in the local log file.

  Reason code: 16

  Reason: Authentication failed due to incompatibility of user credentials. The provided username is not mapped to an existing user account or the password is incorrect.

  Hello

  The problem is with what ISE name, it's choosing to search of the AD. If you look in the ISE newspapers down, you'll see the username that use ISE (firstname, lastname) to search for the AD.

  In your certificate template see what attribute containst name AD (possibly the dns name or email or the name of principle of RFC 822 NT), go to your profile to authenticate cerificate and use this attribute for the user name.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Cisco ISE CLI and GUI password expires

  I got Cisco ISE version 1.1 I am facing a problem with the password CLI and GUI, it expires and I can not connect, I do password reset using the DVD of the ISE.

  I naviguer navigate to the CLI of ISE, then perform the following commands:

  conf t

  password policy

  no password-expiration-enable

  and reset the password of admin GUI, using the command:

  # reset-passwd ise admin request

  from the interface of ISE I delete option for the devil admin account after 45 days.

  but after 60 days, the password expire again.

  kindly advise what to check for this question expires.

  Hello Mostafa,

  Yes, the last answer was more towards past-mgmt GUI because in the majority of cases, it happens with the administrator account on the user interface. I need to know if you've restarted the ISE after disabling the expiration of the CLI, because what I read a few weeks in an internal fault which password policy settings are not preserved on cli after restart so just to check could please check current on CLI w settings / help to see the race. in the password policy.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Cisco ISE point endpoint assets use Reset

  Hello

  I have a Cisco ISE running version 1.1, and I was wondering if it would be possible to reset the license use/active end point shown on the dashboard? Noted after a restoration of EHT due to the replacement of the material and I noticed that endpoints use County/active license doesn't seem to go down.

  The following methods have been tried, but without success:

  1. reboot the Server/service of ise

  2. turn off all devices in the network use the ise as there are no customers/device access; example of switch/wlc/etc...

  3 remove all use of endpoints in the Group of identity/identities

  4 disable profiling at the ise

  As the ise has been installed with a basic license; not too sure if it can be either a bad restoration (all service/application work however) / accounting bad Ray which is not expired on the ise / etc...

  Any help is appreciated on how to reset the active use of point of termination/license.

  Thank you.

  Here is a method to remove outdated records. Please try this:

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/api_ref_guide/ise_api_ref_ch2.html#wp1072950

  Thank you

  Tarik Admani
  * Please note the useful messages *.