Cisco ISE point endpoint assets use Reset

Similar Questions

• Authentication (Windows Server 2013) AD Cisco ISE problem

  Background:

  Has deployed two Cisco ISE 1.1.3. ISE will be used to authenticate users wireless access admin WLC and switches. Database backend is Microsoft running on Windows Server 2012 AD. Existing Cisco ACS 4.2 still running and authenticate users. There are two Cisco WLCs version 7.2.111.3.

  Wireless users authenticates to AD, through works of GBA 4.2. Access admin WLC and switches to the announcement through ISE works. Authentication with PEAP-MSCHAPv2 access and admin PAP/ASCII wireless.

  Problem:

  Wireless users cannot authenticate to the announcement through ISE. This is the error message '11051 RADIUS packet contains invalid state attribute' & '24444 Active Directory failed because of an error that is not specified in the ISE'.

  

  Conducted a detailed test of the AD of the ISE. The test was a success and the result seems fine except for the below:

  xxdc01.XX.com (10.21.3.1)

  Ping: 0 Mins Ago

  Status: down

  xxdc02.XX.com (10.21.3.2)

  Ping: 0 Mins Ago

  Status: down

  xxdc01.XX.com

  Last success: Thu Jan 1 10:00 1970

  March 11 failure: read 11:18:04 2013

  Success: 0

  Chess: 11006

  xxdc02.XX.com

  Last success: Fri Mar 11 09:43:31 2013

  March 11 failure: read 11:18:04 2013

  Success: 25

  Chess: 11006

  Domain controller: xxdc02.xx.com:389

  Domain controller type: unknown functional level DC: 5

  Domain name: xx.COM

  IsGlobalCatalogReady: TRUE

  DomainFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  ForestFunctionality: 2 = (DS_BEHAVIOR_WIN2003)

  Action taken:

  Log Cisco ISE and WLC by using the credentials of the AD. This excludes the connection AD, clock and AAA shared secret as the problem.

  (2) wireless authentication tested using EAP-FAST, but same problem occurs.

  (3) detailed error message shows below. This excludes any authentication and authorization policies. Even before hitting the authentication policy, the AD search fails.

  12304 extract EAP-response containing PEAP stimulus / response

  11808 extracted EAP-response containing EAP - MSCHAP VERSION challenge response to the internal method and accepting of EAP - MSCHAP VERSION such as negotiated

  Evaluate the politics of identity

  15006 set default mapping rule

  15013 selected identity Store - AD1

  24430 Authenticating user in Active Directory

  24444 active Directory operation failed because of an error that is not specified in the ISE

  (4) enabled the registration of debugging AD and had a look at the logging. Nothing significant, and no clue about the problem.

  (5) wireless tested on different mobile phones with the same error and laptos

  (6) delete and add new customer/features of AAA Cisco ISE and WLC

  (7) ISE services restarted

  (8) join domain on Cisco ISE

  (9) notes of verified version of ISE 1.1.3 and WLC 7.2.111.3 for any open caveats. Find anything related to this problem.

  10) there are two ISE and two deployed WLC. Tested a different combination of ISE1 to WLC1, ISE1 to WLC2, etc. This excludes a hardware problem of WLC.

  Other possibilities/action:

  1) test it on another version WLC. Will have to wait for approval of the failure to upgrade the WLC software.

  (2) incompatibility between Cisco ISE and AD running on Microsoft Windows Server 2012

  Did he experienced something similar to have ideas on why what is happening?

  Thank you.

  Update:

  (1) built an another Cisco ISE 1.1.3 sever in another data center that uses the same domain but other domain controller. Thai domain controller running Windows Server 2008. This work and successful authentication.

  (2) my colleague tested in a lab environment Cisco ISE 1.1.2 with Windows Server 2012. He has had the same problem as described.

  This leads me to think that there is a compatibility issue of Cisco ISE with Windows Server 2012.

  
  

  
  

  Yes, it seems that 1.1.3 doesn't support Server 2012 as of yet.

  External identity Source OS/Version

  Microsoft Windows Active Directory 2003 R2 32-bit and 64-bit

  Active Directory Microsoft Windows 2008 32-bit and 64-bit

  Microsoft Windows Active Directory 2008 R2 64-bit only

  Microsoft Windows Active Directory 2003 32-bit only

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/compatibility/ise_sdt.PDF

• Group of endpoint Cisco ISE 1.4 hotspot

  Patch 1.4 Cisco ISE 6

  Cisco WLC 8.0.121

  Setup

  the WLC has a named Hotspot SSID. It uses mac auth with radius of the NAC to redirect to the Hotspot portal of reviews on the ISE.

  drops flexconnect users in vlan 401 (with preAuthAcl), after the PSU, it is initially a COA to move users to VLANs 413 with permitInternetAcl

  Description of the problem:

  users connect to the SSID of the access point and get an IP address valid in vlan 401

  redirected to the page of the hotspot on the ISE with a PSU and the PIN code request.

  are they disconnect from the network and reconnect, the ISE sends a certificate of authenticity to move to 413 without the Hotspot portal.

  what I've noticed, is that as soon as users get the redirect of the original Web page, they are moved to the endpoint group defined in the hotspot portal.

  What I've read about this behavior makes me understand that it is a default behavior, but if that's the case then I'm not sure on how I can make my font to check if the PSU has been accepted.

  Thank you

  Maarten

  Portal.PNG

  

  Policy.PNG

  

  Profile.PNG

  

  Cisco WLC 8.2.100

  Patch 1.4 ISE 6

  Similar Hotspot ISE installation, of similar rules except change VLAN. I have observed the same behavior.

  This configuration was working on patch 5.

  Update:

  I found a solution based on the following bug. Use the following attribute in the authorization rule. The success page remains but no Instant Internet access is available using this workaround solution.

  https://Tools.Cisco.com/bugsearch/bug/CSCux22558/?referring_site=bugquic...

  ' Workaround:
  "Use the LEAST 24 endpoints: LastAUPAcceptanceHours for example (means PUA agreed less than 24 hours ago).

• Session of endpoint on Cisco ISE 2.1

  Hello

  I installed 2.1 ISE with patch 1.

  I have a question about the session on Cisco ISE calendar.

  If a n receives an Access_Accept message for an endpoint, ISE installs a session that is visible on the Live session section.

  If endpoint disconnects from the network, which is the time-out for this session?

  Is it possible to set this timer?

  I try to put an end to the session with the CoA on Live Session Action, but this action fails because my switch does not support cost.

  So I reboot Cisco ISE and after its reloading, the session is deleted.

  In a case that it is not possible to use the feature of 'end', is it possible to delete the session in some other way?

  Thanks in advance

  Antonio

  Hi Antonio,.

  • Completed sessions are cleaned up 15 minutes after the end.
  • If there are authentication, but no accounting, these sessions are deleted after an hour.
  • All idle sessions are cleaned after seven days.

  But your n should send account opening and stop the message for the best operation.

  For the manual uninstall, you can use under method as shown in the link I pasted. You can consult the section "withdrawal embusked sessions.

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-4/api_ref_guide/API _...

  Also, you might be interested in the discussion below:

  https://communities.Cisco.com/thread/61587?start=0&TSTART=0

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• The band multiple @domaine used in user name on the integration of commercials with Cisco ISE?

  Hello

  How to remove multiple domain suffixes through ISE with AD user name used as an external identity Source. Username is used in [email protected] / * / format.

  Cisco ISE 1.2 patch introduced 4 Strip prefix or suffix @domaine Kingdom of the username through ISE with AD used as external identity Source. But the documentation is not updated for this feature. I am able to band 1 domain successfully suffix but following conditions listed in the list of suffixes fails to get stripped.

  Any thoughts on the same.

  Thanks Kumar

  In the ISE under Administration > identity management > external identity Sources

  Choose the Active Directory on the left, select your ad server and Advanced settings

  Under identity band of suffix, make sure prefixes band below: is selected (I know, it says prefix).

  In the list of Suffixes box, enter your list of domain suffixes to undress.  The separator character is a comma (,).

  

  If this does not solve your problem, then I fear that a call to TAC may be in order.

  UPDATE *.

  Spaces are significant characters.  The registration of domains, so as such:

  @domain.com, @domain.local, @testdomain.com

  END UPDATE *.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

  Post edited by: Charles Moreton

• Is it possible to map a promoter group in Cisco ISE to a group of users in Active Directory, using a RADIUS server?

  Hello!!

  We are working on a mapping between a promoter Cisco ISE group and a user group in Active Directory, but the customer wants the mapping through a RADIUS SERVER, to avoid the ISE by querying directly activate Directory.

  I know it is possible to use a RADIUS SERVER as source of external identity for ISE... but, is possible to use this RADIUS SERVER for this sponsor group manages?

  Thank you and best regards!

  Hi Rodrigo,

  The answer is no. There is no way to integrate the portal Sponsor config with a RADIUS server. Your DB for authentication Portal Sponsor options;

  AD
  LDAP
  User internal ISE DB

  Sent by Cisco Support technique iPhone App

• Cisco ISE

  Hi all

  I intend to implement cisco ISE in my network. I have 1000 endpoints and some mobile devices. I plan to use approach distributed and all licenses possible.

  It is: should I buy licenses for all nodes. For example 1000 for the head node, 1000 for high school, 1000 for surveillance and so forth?

  Or should I buy license only 1000 (I mean 1000 base + 1000 advances + 100 mobile) ones and apply them to all nodes?

  Concerning

  Max

  Hi Max.

  ISE is authorized by the deployment. So if you have a distributed with us deployment will tell ISE 10 nodes or servers you will always only the node main Administrator license.

  Now, if you plan to have two deployments (say a deployment for the EMEA region and the other for APAC) then you would need licenses for both deployments (you allow the node primary admin in each deployment).

  I hope this makes sense :)

  Thank you for evaluating useful messages!

• Cisco ISE 1.3 disable "Identity Resolve" step?

  Currently, I am working for a client with a Cisco ISE 1.3 deployment.

  The Cisco access point are currently authenticated by MAB, the customer wants to improve that I proposed to implement EAP-FAST speed of the MAB for the AP for a quick and easy solution.

  I work in the test and production environment, but I was cycling through the authentication process and found something strange.

  I created a rule that if the Tunnel network protocol is EAP-FAST are authenticated by internal users.

  It works very well, the ISE recognizes the flow and internal users through authenticatie.

  15041 assessment political identity
  15048 questioned PIP - Network Access.EapAuthentication
  15048 questioned PIP - Network Access.EapTunnel
  15004 Matched rule - EAP-FAST
  15013 selected identity Source - internal users
  24210 Looking user in IDStore of internal users - >
  24212 found user in internal users IDStore
  Authentication 22037 spent

  On the way he also decided to search for the user in Active Directory.

  Given that the user has not been created in Active Directory, that it does not.

  Looking 24432 user in Active Directory - >
  Identity resolution 24325 - >
  Search 24313 of corresponding accounts at the junction - >
  24318 no corresponding account found in the forest - >
  24322 identity resolution detected no corresponding case
  Failure of the 24352 - ERROR_NO_SUCH_USER identity resolution
  24412 not found user in Active Directory - >
  15048 questioned PIP - >. ExternalGroups
  15048 questioned PIP - Network Access.EapTunnel
  15004 Matched rule - AP_EAPFAST
  15016 selected the authorization - AP_Lan profile
  11002 returned access RADIUS acceptance

  So the authentication and authorization is successful but he try's to resolve the user in active directory.

  I checked the authentication for MAB process, and here I see the same error.

  The MAC address of the device used to MAB also is added to the ISE, then authentication through internal users, authentication and authorization is successful, but ISE wants to solve the (MAC address of the device) user in Active Directory.

  We also see this step for the flow of EAP - TLS, and in this case the identity stage via resolution is successful.

  Is it possible that I can disable the resolution of identity through AD when the internal user group? (or in the world?)

  I did some research and found this (search for LDAP users)

  http://www.Cisco.com/en/us/docs/security/ISE/1.0/user_guide/ise10_man_id...

  When I look at our deployment, it is nothing configured under LDAP.

  If you have rules in your authorization rules that use ad groups that are in front of your MAB or the EAP-FAST rules, ISE will do a search to see if it needs to match this rule. Put your MAB and EAP-FAST rules about AD membership rules, and it won't do the research.

• Cisco ISE 1.3

  Guys good day.

  I try to configure the new 1.3 ISE of Cisco.

  I use a version of the 7.4.121 of Vwlc software.

  My problem is that when a client authenticates to the ISE server, endpoint is automatically added to the store of identity of internal endpoints.

  For this reason, if the customer comes off the network and try to join again, the client is located in the internal endpoints and is denied access to redirect.

  Is this a bug or is at - it a setting that I can disable?

  you will find ISE Version 1.3 Hotspot Configuration Example

  http://www.Cisco.com/c/en/us/support/docs/security/identity-services-Eng...

• Question about my first payment of cisco ISE

  Hi, thanks in advance,

  It's my first time to be implemented cisco ISE 1.1.4 with Vmware Esxi v5.5

  I did so far process

  -Created NTP, DNS, AD, of course ESXI running and have link between each other, ISE is able to synchronize the time with ntp server and DNS, etc AD.

  -J' created repository for installation of application bundle - which is ise-appbundle - 1.1.4.218.i386 that I could not find any fault of the application.

  However, while I was doing installation and it said ' / opt/oracle/base/product/11.2.0/dbhome_1/bin/lsnrctl: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: no such file or directory "."

  I already check some forums and communities, and I have no problem about synchronizing time on dns with ntp and ISE itself with ntp.

  I have no firewall between devices and no other network devices don't interfere.

  and at the end of newspapers, it comes up like this

  ########################################################################################

  ERROR: CANNOT START DB!

  Database is not available in 240 seconds Timeout.

  This could be the result of incorrect network interface configuration

  or the lack of resources on the device or the virtual computer. Please solve the problem, run the following CLI to start the database again:

  "reset - config application ise"

  ########################################################################################

  Im just lost now... Any recommendation?

  Well, it is true that the CCIE Security use ISE 1.1 as its base. So for the installation of laboratory only for this purpose, you might go with him.

  90% of the things are similar and the concepts are identical to 1.1 to 1.3. The first versions were buggy however and we recommend to all production users go with 1.3.

  A new installation of 1.14 should be OK; but you would not use the Archives of gz appbundle ISE - you need to use the new installation ISO.

  Please see screenshot below.

  ise_1.1.4_packages.PNG

  

• SealthWatch intrgration with Cisco ISE-3315

  Hello Experts,

  I have Cisco ISE-3315 version 1.3

  Can I order and SealthWatch Lancop and use it with this series of ISE 3315? Or I must have the SNS?

  Hi Imran-

  3315 unit supports all personas running ISE 1.3

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-3/Release_notes/ise13_rn.html#pgfId-527567

  Now, that being said, don't forget that this devices has a lot less resources compared with the NHU devices. So, if you decided to run all personas on it then you will be greatly limited the number of concurrent endpoints.

  Thank you for evaluating useful messages!

• Cisco ISE CLI and GUI password expires

  I got Cisco ISE version 1.1 I am facing a problem with the password CLI and GUI, it expires and I can not connect, I do password reset using the DVD of the ISE.

  I naviguer navigate to the CLI of ISE, then perform the following commands:

  conf t

  password policy

  no password-expiration-enable

  and reset the password of admin GUI, using the command:

  # reset-passwd ise admin request

  from the interface of ISE I delete option for the devil admin account after 45 days.

  but after 60 days, the password expire again.

  kindly advise what to check for this question expires.

  Hello Mostafa,

  Yes, the last answer was more towards past-mgmt GUI because in the majority of cases, it happens with the administrator account on the user interface. I need to know if you've restarted the ISE after disabling the expiration of the CLI, because what I read a few weeks in an internal fault which password policy settings are not preserved on cli after restart so just to check could please check current on CLI w settings / help to see the race. in the password policy.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Cisco ISE 1.1.1 with Windows posturing

  Hello

  We tired for configured windows posturing here's the scenario

  We saw five ise boxes 3315 with version 1.1.1 off them 2 is admin, 2 is PS and 1 MNT

  and we have local Symantec and WSUS Server.

  We make posturing for Windows where I have a few questions

  (1) is there an integration here of the local WSUS server with Cisco ISE where Cisco ISE can automatically take all the mandatory WSUS update according to the crititcality of the WSUS server.

  (2) what is advised to set up the strategy of the Posture of the posture of windows in Cisco ISE and if manually configure windows political posture using specific KB and if there is an update available on Microsoft will we be able to configure the policy for the new update.

  (3) we have configured authentication dot1x in cisco ise and asked as well as on switch port where once the user must be connected to dot1x port of the switch it invites username and password dot1x and therefore, authorization policy, it gives vlan appropriate dynamics.

  But what are the ways where we can restrict the machine which is rather than the assets of the company and even if the user's user name and password in short any employee aware how we can restrict the user making the machine rather than the assets of the company?

  (4) can configure US policy posture for antivirus which will keep us in normal mode and at the same time, we can put posturing for windows which monioring mode which only monitor policy posture and reflected in the monitoring, log in which does not restrict the network for windows posturing

  That will be great if any one can please help me to get the issues

  Thank you

  Pranav

  What follows is under the POLICY-OF ELEMENTS of STRATEGY-POSTURE-> REQUIREMENTS > >

  

  What follows is located under

  POLICY OF-> ELEMENTS OF STRATEGY-> POSTURE->

  REPAIR-> WINDOWS SERVER UPDATE SERVICES REMEDIATION ACTIONS

  

  What follows is part POLICY-> POSTURE

  

  These settings work ALMOST flawlessly for me by forcing her we approved on our WSUS server for our group of workstations updated (all of our laptops are members of the) which meet the criteria of severity EXPRESS (critical and Important). Now, what I've discovered in the last few days is that... MS seems a bit random in their identification of what severity level they assign to their updates. For example... I think that a service pack of the operating system would be considered IMPORTANT if not CRITICAL... however... Look at this from the identification of the server WSUS from Windows 7 Service Pack 1:

  

  Thus, those who updates you deleted, I'd go throgh your WSUS server to identify how they are identified by gravity, then according to your needs set the parameters of the ISE accordingly to ensure that you get updates you plan.

  Hope this helps everyone out there who has similar problems.

  Thank you

  Dirk

• Cisco ISE add user cli

  Hello guys,.

  I have Cisco ISE Cli access, but I do not know the admin password. I mean, password is saved in SecureCRT and I am automatically.
  I decided to add another cli user account, login with this user and reset the admin password.
  Strangely, I can't connect with the second user.
  How can I add and connect with the second user of cli?
  Can I use both at the same time?

  What command did you use to create the second user?

  It should be "username password admin role plain.

  Jan

• Cisco ise license command

  I have a question

  1. is it possible to install the Cisco ISE software on the server machine to physical HP (without solution VMware or without the use of SNS-3415-k9 cisco device)?

  2. for 2500 users online, I'll order L-ISE-BSE-2550, L-ISE-PLS-S-2500 and L-ISE-APX-S-2500 of basis, more and apex licenses. My question is HA (primary and secondary) application I need 2 licenses for each? (2 * L - ISE - BSE - 2550, 2 * L - ISE - PLS - S - 2500 and 2 * L - ISE - APX - S - 2500)

  or just a license for each is enough?

  3. If I implement Cisco ISE and HA on VMware environment, can I 2 L-ISE-VM-K9 licenses for each VM machines? and also I need 2 licenses for each basic, plus, and at the apex?

  4. What is smart net Cisco and Cisco SASU? need to buy these for support and ticketing system?

  5. What is license for cisco anyconnect (L-AC-APX-1 year-G)?

  thnx in adv.

  You can install ISE on a HP ONLY Server if you are using software virtualization (VMware or KVM).

  The Guide of Installation of ISE sets out three options:

  1 hardware appliance from cisco SNS

  2. virtual machine VMware

  3 Linux KVM.

  The AnyConnect license is required to qualify with the features of the Apex. It is not installed on the ISE server, however.