Cisco ISE profiling - Split-Corporate/guest access

Similar Questions

• Cisco ISE profiling policy

  If an end point is several strategies for profiling and each political profile creates a new identity group and unique identity group will be endpoint we present you in. I understand that an endpoint can only be profiled as a single group of identity. Another way of framing the question is, are matched top-down profiling policies or another way? Thanks in advance.

  No problem of Graham. To answer your second question: the attributes that are collected first what triggers a rule profiling would be used first. For example, let's say you have a rule of profiling CF 100 which is looking for DHCP of XYZ class identifier, and then a second rule profiling CF 100 which is looking for the MAC YES of ABC. In this case, the second rule would be affected first as the MAC information is collected before the DHCP info is. As a result, the device will be profiled and placed in the endpoint group associated with the second profiling rule until / unless additional attributes are collected which would correspond to a different rule of profiling CF > 100.

  I hope this makes sense

  Thank you for evaluating useful messages!

• Cisco ISE 1.4 - guest access

  Hello world

  We use the ISE 1.4, now, we want to use the guest access ISE Module. I created the user invited on portal of the sponsor. Now, how can I configure authentication and authorization policy? I want to verify the user.

  Thank you.

  Hello! I strongly suggest you check out the videos of laboratory Minutes on access for guests and all the rest too :)

  http://www.labminutes.com/video/sec/ISE

  Give those a try and let us know if you still need help.

  Thank you for evaluating useful messages!

• Guest access with ISE and WLC LWA

  Hi guys,.

  Our company try to implement access as guest with dan ISE WLC with the local Web authentication method. But there is problem that comes with the certificate. This is the scenario:

  1. the clients are trying to connect wifi with guest SSID

  2. once it connects, you can open the browser and try to open a Web page (example: cisco.com)

  3, because guests didn't connect, so this link redirect to "ISE Guest Login Page" (become): url

  https://ISE-hostname:8443/guestportal/login.action?switch_url= https://1.1.1.1/login.html&wlan=Guest&redirect=www.cisco.com/

  )

  4. If there is no Login to ISE not installed comments Page, no reliable connection of message message, but it will be fine is they "Add Exception and install the certificate".

  

  5. once the Guest Login Page will appear and you can enter their username and password.

  

  6 connection success and they will be redirected to www.cisco.com and there pop-up 1.1.1.1 (IP of the Virtual Interface WLC) with the logout button.

  The problem occur in scenario 6, after the success of the opening session, the Web page with the address and the error of certificate ISE IP to 1.1.1.1 is appear.

  

  I know that it happened when you can has no Page of Login of WLC certificate...

  My Question is, is there a way of tunneling WLC certificate to EHT? Or what we can do for ISE validate certificate WLC, invited didn't need to install the certificate WLC / root certificate before you connect to the Wifi?

  THX 4 your answer and sorry for my bad English...

  Do not mix WLC with ISE comments Portal local Web authentication. Choose one or the other. I suggest the portal + WLC CWA.

• Access VPN ASA and cisco ISE Admin

  Hello

  Currently I'm deployment anyconnect VPN Solution for my client on ASA 9.2 (3). We use the ISE 1.3 to authenticate remote users.

  In the policy stipulates the conditions, I put the condition as below.

  Policy name: Anyconnect

  Condition: DEVICE: Device Type Device Type #All Device Types #Dial - in access EQUALS AND
  RADIUS: NAS-Port-Type is equal to virtual

  I'm authenticating users against the AD.

  I am also restrict users based on group membership in authorization policies by using the OU attributes.

  This works as expected for remote users.

  We also use the ISE to authenticate administrators to connect to the firewall. Now what happens is, Cisco ASA valid also against policy, administrators and their default name Anyconnect.

  Now the question is, how to set up different political requirement for access network admin and users the same Firewall VPN.

  Any suggestions on this would be a great help.

  See you soon,.

  Sri

  You can get some ideas from this article of mine:

  http://ltlnetworker.WordPress.com/2014/08/31/using-Cisco-ISE-as-a-generic-RADIUS-server/

• Cisco ISE comments Sponsor Isssue Portal

  Hi all

  We have insatalled 5 boxes of ise 3315 IOS 1.0.4 in our network where in two of them are admin node, two services strategy and has a node mnt. We using sponsor portal for guest user wirless comments where we integrated WLC 5508 with ise and using weblogin for guest users.

  We have created open ssid wlc and external aid redirected url to ise for the login page of comments.

  But when we create a guest in the sponsor for guest user connection, user that we faced after publication

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection.

  Can us guest login successful after comments connect to the portal of reviews or redirect any other link as google.com for guest user will be done the knowledge he is able to access the internet now

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user.

  Can someone help me resolved on observation about covers them cisco ise comments sponsor Portal

  Thank you & best regards

  Pranav Gade

  Pranav your answers are online,

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection. When you use CWA (Central web authentication) there is no way we can redirect users by using the redirect url because it will always redirect users for each time they start a web request. There is no other cost functionality that will remove this condition because they have already been authenticated.  Here is a guide that explains the user experience when using web Central auth -

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/user_guide/ise_guest_pol.html#wp1296954

  Can us guest login successful after login guest Portal comments or redirect any other link as google.com for guest user will be acquainted with it is able to access the internet now This is not possible, you can change the verbage and force the AUP to be displayed to users informing them that they can start their web request after hitting the button I accept.

  Here's to justify it experience, once users go through the process of reviews-

  http://www.Cisco.com/en/us/products/ps11640/products_configuration_example09186a0080ba6514.shtml#final

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user. Check advance timer on your SSID you can be hitting the session on the WLC timeout. Please disable this option and let the functionality of COA ISE at expiration of the user on the controller sessions of.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Group of endpoint Cisco ISE 1.4 hotspot

  Patch 1.4 Cisco ISE 6

  Cisco WLC 8.0.121

  Setup

  the WLC has a named Hotspot SSID. It uses mac auth with radius of the NAC to redirect to the Hotspot portal of reviews on the ISE.

  drops flexconnect users in vlan 401 (with preAuthAcl), after the PSU, it is initially a COA to move users to VLANs 413 with permitInternetAcl

  Description of the problem:

  users connect to the SSID of the access point and get an IP address valid in vlan 401

  redirected to the page of the hotspot on the ISE with a PSU and the PIN code request.

  are they disconnect from the network and reconnect, the ISE sends a certificate of authenticity to move to 413 without the Hotspot portal.

  what I've noticed, is that as soon as users get the redirect of the original Web page, they are moved to the endpoint group defined in the hotspot portal.

  What I've read about this behavior makes me understand that it is a default behavior, but if that's the case then I'm not sure on how I can make my font to check if the PSU has been accepted.

  Thank you

  Maarten

  Portal.PNG

  

  Policy.PNG

  

  Profile.PNG

  

  Cisco WLC 8.2.100

  Patch 1.4 ISE 6

  Similar Hotspot ISE installation, of similar rules except change VLAN. I have observed the same behavior.

  This configuration was working on patch 5.

  Update:

  I found a solution based on the following bug. Use the following attribute in the authorization rule. The success page remains but no Instant Internet access is available using this workaround solution.

  https://Tools.Cisco.com/bugsearch/bug/CSCux22558/?referring_site=bugquic...

  ' Workaround:
  "Use the LEAST 24 endpoints: LastAUPAcceptanceHours for example (means PUA agreed less than 24 hours ago).

• Cisco ISE 2.0 and WLC 5508 with 7.6.130.0

  I have looked on the release notes and compatibility n for ISE 2.0 and have not seen the answer to that. For the WLC 5508, the minimum AirOS is 7.0.116.0 but he limited the AAA authentication and support for comments. The recommended version of AirOS is 8.0.121.0.

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/2-0/compatibility/ISE _...

  What airos 7.6.130.0? I know that AirOS release works with 1.3 and 1.4, even if they show the same support for version 2.0. I'm just afraid that something may have changed with 2.0. I am concerned only about the AAA authentication and guest access. No BYOD, posture or MDM is necessary.

  No change. Works well.

• Cisco ISE 1.3 disable "Identity Resolve" step?

  Currently, I am working for a client with a Cisco ISE 1.3 deployment.

  The Cisco access point are currently authenticated by MAB, the customer wants to improve that I proposed to implement EAP-FAST speed of the MAB for the AP for a quick and easy solution.

  I work in the test and production environment, but I was cycling through the authentication process and found something strange.

  I created a rule that if the Tunnel network protocol is EAP-FAST are authenticated by internal users.

  It works very well, the ISE recognizes the flow and internal users through authenticatie.

  15041 assessment political identity
  15048 questioned PIP - Network Access.EapAuthentication
  15048 questioned PIP - Network Access.EapTunnel
  15004 Matched rule - EAP-FAST
  15013 selected identity Source - internal users
  24210 Looking user in IDStore of internal users - >
  24212 found user in internal users IDStore
  Authentication 22037 spent

  On the way he also decided to search for the user in Active Directory.

  Given that the user has not been created in Active Directory, that it does not.

  Looking 24432 user in Active Directory - >
  Identity resolution 24325 - >
  Search 24313 of corresponding accounts at the junction - >
  24318 no corresponding account found in the forest - >
  24322 identity resolution detected no corresponding case
  Failure of the 24352 - ERROR_NO_SUCH_USER identity resolution
  24412 not found user in Active Directory - >
  15048 questioned PIP - >. ExternalGroups
  15048 questioned PIP - Network Access.EapTunnel
  15004 Matched rule - AP_EAPFAST
  15016 selected the authorization - AP_Lan profile
  11002 returned access RADIUS acceptance

  So the authentication and authorization is successful but he try's to resolve the user in active directory.

  I checked the authentication for MAB process, and here I see the same error.

  The MAC address of the device used to MAB also is added to the ISE, then authentication through internal users, authentication and authorization is successful, but ISE wants to solve the (MAC address of the device) user in Active Directory.

  We also see this step for the flow of EAP - TLS, and in this case the identity stage via resolution is successful.

  Is it possible that I can disable the resolution of identity through AD when the internal user group? (or in the world?)

  I did some research and found this (search for LDAP users)

  http://www.Cisco.com/en/us/docs/security/ISE/1.0/user_guide/ise10_man_id...

  When I look at our deployment, it is nothing configured under LDAP.

  If you have rules in your authorization rules that use ad groups that are in front of your MAB or the EAP-FAST rules, ISE will do a search to see if it needs to match this rule. Put your MAB and EAP-FAST rules about AD membership rules, and it won't do the research.

• Cisco ISE 1.2 and the ad group

  Hello

  I have Cisco ISE installed on my EXSi server for my test pilot. I added several ad groups at ISE as well.

  I created a condition of authorization policy, that is WIRELESS_DOT1X_USERS (see screenshot)
  Basically, I just replicate the default Wireless_802.1X and added Network Access: EapAuthentication, Equals, EAP - TLS.

  My problem is, I have been unable to join the wireless network, if I added my ad group to the authorization strategy (see screenshot). The user I is a member of WLAN USERS. If I removed the authorization policy group, the use is able to join the wireless network.

  I have attached the screenshot of ISE newspapers as well. I checked the ISE, AD/NPS, WLC, laptop computer time and date, and they are all in sync.

  I also have the WLC added as NPS client on my network.

  I checked the newspaper AD and I found it, it was the local management user WLCs trying to authenticate. It is supposed to be my wireless user Credential is not the WLC.

  It's the paper I received from the AD/NPS

  Access denied to user network policy server.

  Contact the server administrator to strategy network for more information.

  User:

  Security ID: NULL SID

  Account name: admin

  Domain account: AAENG

  Account name: AAENG\admin

  Client computer:

  Security ID: NULL SID

  Account name: -.

  Full account name: -.

  OS version: -.

  Called Station identifier: -.

  Calling the Station identifier: -.

  NAS:

  NAS IPv4 address: 172.28.255.42

  NAS IPv6 address: -.

  NAS identifier: RK3W5508-01

  NAS Port Type: -.

  NAS Port:                              -

  RADIUS client:

  Friendly name of client: RK3W5508-01

  The client IP address: 172.28.255.42

  Information about authentication:

  Connection request policy name: Windows authentication for all users use

  The network policy name: -.

  Authentication provider: Windows

  Authentication server: WIN - RSTMIMB7F45.aaeng.local

  Authentication type: PAP

  EAP Type:                              -

  Identifier for account: -.

  Results of logging: Accounting Information was written in the local log file.

  Reason code: 16

  Reason: Authentication failed due to incompatibility of user credentials. The provided username is not mapped to an existing user account or the password is incorrect.

  Hello

  The problem is with what ISE name, it's choosing to search of the AD. If you look in the ISE newspapers down, you'll see the username that use ISE (firstname, lastname) to search for the AD.

  In your certificate template see what attribute containst name AD (possibly the dns name or email or the name of principle of RFC 822 NT), go to your profile to authenticate cerificate and use this attribute for the user name.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Cisco ISE comments Portal - DNS problem - External area

  Hello

  I have a client that has the following sceanrio:

  In a wireless deployment and deployment Cisco ISE 1.1.3 with CWA, when the wireless client receives the URL ISE redictect (URL to access the portal of ISE comments), this URL is based on the ISE DNS name, not on its IP address. Thus, the PC cannot solve this problem by DNS name because there is no DNS in the external area (for the guets) or by using the addresses of servers DNS ISP provided by the DHCP server, and therefore it cannot access the portal comments at all;

  I know that in an attempt to manually code the IP address - it doesn't (IE in the authorization profile CWA, the equivalent URL redirection via the pair av CISCO as follows:)

  Cisco-AV-Paire = redirect url =https://10.10.10.10:8443/guestportal/gateway? sessionId = sessionIdValue & action = cwa,)

  given that the sessionIdValue variable is not replaced by its real value when sending to the wireless client)

  My question is: this question has been addressed in version 1.2 of Cisco of ISE - has anyone tried it if has been processed? If not in Cisco 1.2 - does anyone know iof this feature will become available?

  Thanks in advance for your answers.

  Robert C.

  Robert,

  Manual assignment has been made available in version 1.2 of the ISE.

  M.

  

• Cisco ISE point endpoint assets use Reset

  Hello

  I have a Cisco ISE running version 1.1, and I was wondering if it would be possible to reset the license use/active end point shown on the dashboard? Noted after a restoration of EHT due to the replacement of the material and I noticed that endpoints use County/active license doesn't seem to go down.

  The following methods have been tried, but without success:

  1. reboot the Server/service of ise

  2. turn off all devices in the network use the ise as there are no customers/device access; example of switch/wlc/etc...

  3 remove all use of endpoints in the Group of identity/identities

  4 disable profiling at the ise

  As the ise has been installed with a basic license; not too sure if it can be either a bad restoration (all service/application work however) / accounting bad Ray which is not expired on the ise / etc...

  Any help is appreciated on how to reset the active use of point of termination/license.

  Thank you.

  Here is a method to remove outdated records. Please try this:

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/api_ref_guide/ise_api_ref_ch2.html#wp1072950

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Integration of CISCO ISE with another controller wireless lan of the seller

  Hi all!

  I am currently working on an assignment and eager to integrate the identity service provider in the network. the only problem is that the deployed wireless network earlier of another provider I just need to know that either ISE has integration with the other controller feature wireless provider and can provide guest access control. The LDAP integration is also required.

  Waiting for help!

  Hello

  According to my knowledge Yes, Cisco ISE can be integrated with another controller wireless LAN of the seller, but limited. (Aruba, Rukus) and if you want to add the external identity group to your network, then LDAP integration is required.

• Approved sponsor guest access

  I was now all day and fight a little bit. Someone at - it a doc very detailed on-site sponsor guest access approved with ISE 2.x and WLC code version 8.2.110.0.

  I went through the process of implementation of the portals to the best of my abilities. I have my users who authenticate with ISE with PEAP for Wireless Corp. so I know it works.

  How can I tell WLC/ISE which SSID I use for guest access? Also my customer get IP address, then it should be redirected?

  I get this error on the WLC:

  * apfReceiveTask: 20:37:31.136 Jun 13: % CSA-3-CLIENT_NO_ACCESS: apf_80211.c:4285 Authentication failed for the customer: c0:cc:f8:17: of: 25. ACL substitute incompatibility of AAA server.

  And I see this in splunk:

  June 13-15:50:28 10.20.0.60 June 13-15:50:28 ise01 CISE_Passed_Authentications 0000157854 4 0 15:50:28.428 2016-06-13-05:00 0006695154 5200 NOTICE Passed-authentication: authentication successful, ConfigVersionId = 90, IP = 10.20.63.14, DestinationIPAddress = 10.20.0.60, DestinationPort = 1812, UserName=C0-CC-F8-17-DE-25, Protocol = RADIUS, RequestLatency = 12, NetworkDeviceName = BNA-WLC2500-01, username is c0ccf817de25, NAS-IP-Address = 10.20.63.14, NAS-Port = 1 Type of Service = call check, Framed-MTU = 1300, Called-Station-ID=d8-b1-90-08-87-b0:TEST_GUEST, Calling-Station-ID=c0-cc-f8-17-de-25 Identify NAS = _GUEST, Acct-Session-Id = 575f1c94/c0: cc:f8:17: of: 25 / 23, NAS-Port-Type = Wireless-IEEE 802.11, Tunnel-Type =(tag=0) VLAN, Tunnel-Medium-Type =(tag=0) 802, Tunnel-Private-Group-ID =(tag=0) 142, cisco-av-pair is audit-session-id is 0a143f0e0000000f575f1c94, Airespace-Wlan-Id = 3, OriginalUserName = c0ccf817de25, NetworkDeviceProfileName = Cisco, NetworkDeviceProfileId = 8ade1f15-aef1-4a9a-8158-d02e835179db, IsThirdPartyDeviceFlow = false,

  I can't reach the SSID from my iphone... but it looks like his tent. I suppose an ACL is wrong or a policy is wrong. I think that I have trouble with the VLANs that are pushed to clients.

  Any help would be great thanks...

  Could you send a screenshot of the configuration of the radius server in the WLC (detail page please).

  Did you take a glance at the wlc/monitor clients if the ACL has been pushed for authenticated clients? What is the result?

  Thank you

• Select "Guest Access" router E1000

  I have a Linksys E1000 router. The firmware is 2.1.00 7 build 30 August 2010. I would like to activate or enable guest access. I had to to 192.168.1.1 and find nothing there any access asked. To the wireless tab, the choices are basic setting wireless, advanced wireless, Wireless MAC filter and setting wireless security. Tfhank you.

  I don't think that cisco connect will mess up the configuration.

  You can change the password if necessary.

  I don't think that lion is currently supported.