Question about my first payment of cisco ISE

Similar Questions

• a question about upgrading memory CF for Cisco 3745

  As we know, the cisco 3745 has 2 locations CF. memory One is internal with a 32 MB of memory by default CF card, another one is external.

  My question is:

  1 is the same as the internal memory card CF CF external memory card?

  2. If I choose the upgrade of the plant CF memory from 32 MB to 128 MB, which slot will be used? Cisco remove the memory of 32MB CF card and install a new 128 MB card in the internal slot or simply add an additional CF memory card through the outside slot?

  Thank you!

  Hello

  the reference for the internal and external numbers are different, which suggests that they are not compatible. So you will have to specify what you want to, for example, MEM3725-32U128CF (which is the internal upgrade) or MEM3725-128CF-EXT (which is the external upgrade).

  In all cases, internal and external cards are not cumulative, in order to get e.g. 128 MB flash, you must either internal, or external card with these 128 MB:

  Q. can partition you the internal Cisco 3700 Series Compact Flash card and the card Compact Flash external to combine or separate them?

  A. No, you cannot join two separate Compact Flash cards or you can their partition.

  HTH,

  GP

• Question about version first submit 1.0 and 1.1, with some corrections?

  Hello

  First of all excuse me if this question has already been answered here.

  If my app (version 1.0) is rejected due some bugs, what's the next step?  Fix it and submit the 1.1 version or do it with 1.0? In my case I presented version 1.1 because I couldn't do it with 1.0 as the application was already signed.

  Thank you

  You can not re - sign with the same version, so change it demanded. There is no need to go back to 1.1, however, if you do not want. There is up to four items to the version number. My last example is 1.0.4.1261... You could make 1.0.0.1 if you wanted.

• Question about how 'First' makes the sequences

  Hi all

  I have a small question. I have a calendar in which I placed a transparent video with a timecode effect thereon for the purpose of lining of the stuff. I turned the visibility of it, but I wonder if I should remove it before as I give to improve the rendering time. First will interfere with him or she will calculate that it is there as an object for "invisible" also?

  This may sound really stupid to ask, but I'm learning how to be as effective as possible in my workflow and if first does not care that it is because he is disabled, so I'd be inclined to let incase I need it again, but if she would accelerate rendering my project then I would take it before my final DVD build I intend to publish.

  Any thoughts?

  Premiere Pro makes that material visible. So feel free to leave there with visibility turned off.

  Edit: to prove to yourself, add an effect to transparent video which causes the rendered line go red. As a"camera view". Die the eyeball and the Red goes. Make sense?

• Can someone help me with questions about the first on Mac?

  I have the trial version on my mac and several questions, I want to solve before you buy.  When I open the software first, he asked if I wanted to download additional content and I; However, the theme of the film is moment that shows a preview is the one that was originally there.  The others are empty, although I can apply to my project.  On the theme of the birthday party, it also shows in my project window into the birthday party some items that I don't see in the film, and a red sign pops up saying "media offline".  After, playback is very jerky and seems to stop at times.  The finished film will run more smoothly and have all the items?    Another problem is that I can only find 12 soundtracks that are in the media with my clips window.  Is that all you have to choose for your projects?

  Another annoyance, that's when I clicked on the "Inspiration Browser" help advice at the bottom, he said I had to download Adobe Reader and I did. However, it continues to display the message and won't let me watch some of the tutorials, although a few works.  (Adobe is installed and I rebooted the computer).

  I want to buy Photoshop Elements and first package but would like to know when I go to the paid version, my problems will be solved.  The project I'm working on that will have the "banner of trial" deleted?  Should I uninstall the trial version and reinstall the paid software?   Also, I would like to know if it is worthwhile to get as edition for extra storage and features.

  I appreciate any help as when I called Adobe they would not answer questions from users of the trial version and directed me to this forum.  (Not a good way to sell their software).

  If the OP is referring to SmartSound QuickTracks, this ARTICLE might be useful. It covers the range of SmartSound Software and music, so there is more information, we're going to need just to QuickTracks. Personally, I use a lot of SmartSound Software and their music. Hardly a project is complete without a material SmartSound in there somewhere.

  Good luck

  Hunt

• question about #show ip arp in cisco 2960 g switch!

  Hi, I would ask on sh ip arp in cisco switch,

  If I type show ip arp in cisco switch, it only displays the arp in the vlan 1, although I have a lot of VLAN connected to the PCs and servers, but only it displays the arp of the vlan 1.

  on my switch, I have an IP under interface vlan 1

  How to view the application of all the VLANS?

  concerning

  Hello

  ARP request is sent to neighbors directly connected in the same vlan, for other hosts in vlan that you'll only arp for default gateway entry.

  Kind regards.

  Alain

  Remember messages useful rate.

• Question about CC first associated with the chapter marks still

  I know that Adobe has stopped further past version CS6.  But it is always possible to add chapter marks to the chronology of the first CC 7.1?

  J. D.

  CC has a keyboard shortcut to create chapter marker still directly, which opens the dialog box for name.  I updated SHIFT + M on my system.

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• Cisco first 2.1 / 2.2 support for Cisco ise 1.3?

  Hi, I just tried to connect cisco IP 2.1 to cisco ISE 1.3, but fails.
  I read the Release Notes, only 1.2 ISE ist supported.
  But I was wondering that the ssl negotiation fails (I made a packet capture).
  So PI 2.1 has not tried to connect to the ise 1.3 via api, because of the connection fails during the ssl handshake.

  Anyway, does anyone know if ISE 1.3 will be supported with a PI or PI 2.2 version 2.1.x?

  ICC 2.1.2 supports up to 1.2 ISE.  ICC 2.2 release date is scheduled for December 2014.  Read below.

  Table 4 The Infrastructure first, Cisco and Cisco wireless version compatibility matrix

• Cisco ISE 1.3 question Active Directory

  Hi people

  I'm having a problem with our Cisco ISE and would love some comments or a solution. I configured to ISE to use our Active Directory setup and so far it seems to be functional. I could connect to retrieve ad groups and use AD for authentication. The problem I encounter is that when I try to go to the ' Administration > Identity Management > Sources external page and select our instance AD in the window side left hand screen hangs and won't load.  Any advice?

  ad_error.PNG

  

  You are using a supported browser and have you tried an alternative one?

  If you are using a supported browser, it looks like a bug in the layout of the page. I was opening, in this case, a case of TAC. I had this same work of page very well for me in the three different 1.3 deployments.

• Cisco ISE comments Sponsor Isssue Portal

  Hi all

  We have insatalled 5 boxes of ise 3315 IOS 1.0.4 in our network where in two of them are admin node, two services strategy and has a node mnt. We using sponsor portal for guest user wirless comments where we integrated WLC 5508 with ise and using weblogin for guest users.

  We have created open ssid wlc and external aid redirected url to ise for the login page of comments.

  But when we create a guest in the sponsor for guest user connection, user that we faced after publication

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection.

  Can us guest login successful after comments connect to the portal of reviews or redirect any other link as google.com for guest user will be done the knowledge he is able to access the internet now

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user.

  Can someone help me resolved on observation about covers them cisco ise comments sponsor Portal

  Thank you & best regards

  Pranav Gade

  Pranav your answers are online,

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection. When you use CWA (Central web authentication) there is no way we can redirect users by using the redirect url because it will always redirect users for each time they start a web request. There is no other cost functionality that will remove this condition because they have already been authenticated.  Here is a guide that explains the user experience when using web Central auth -

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/user_guide/ise_guest_pol.html#wp1296954

  Can us guest login successful after login guest Portal comments or redirect any other link as google.com for guest user will be acquainted with it is able to access the internet now This is not possible, you can change the verbage and force the AUP to be displayed to users informing them that they can start their web request after hitting the button I accept.

  Here's to justify it experience, once users go through the process of reviews-

  http://www.Cisco.com/en/us/products/ps11640/products_configuration_example09186a0080ba6514.shtml#final

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user. Check advance timer on your SSID you can be hitting the session on the WLC timeout. Please disable this option and let the functionality of COA ISE at expiration of the user on the controller sessions of.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Cisco ISE 1.3 disable "Identity Resolve" step?

  Currently, I am working for a client with a Cisco ISE 1.3 deployment.

  The Cisco access point are currently authenticated by MAB, the customer wants to improve that I proposed to implement EAP-FAST speed of the MAB for the AP for a quick and easy solution.

  I work in the test and production environment, but I was cycling through the authentication process and found something strange.

  I created a rule that if the Tunnel network protocol is EAP-FAST are authenticated by internal users.

  It works very well, the ISE recognizes the flow and internal users through authenticatie.

  15041 assessment political identity
  15048 questioned PIP - Network Access.EapAuthentication
  15048 questioned PIP - Network Access.EapTunnel
  15004 Matched rule - EAP-FAST
  15013 selected identity Source - internal users
  24210 Looking user in IDStore of internal users - >
  24212 found user in internal users IDStore
  Authentication 22037 spent

  On the way he also decided to search for the user in Active Directory.

  Given that the user has not been created in Active Directory, that it does not.

  Looking 24432 user in Active Directory - >
  Identity resolution 24325 - >
  Search 24313 of corresponding accounts at the junction - >
  24318 no corresponding account found in the forest - >
  24322 identity resolution detected no corresponding case
  Failure of the 24352 - ERROR_NO_SUCH_USER identity resolution
  24412 not found user in Active Directory - >
  15048 questioned PIP - >. ExternalGroups
  15048 questioned PIP - Network Access.EapTunnel
  15004 Matched rule - AP_EAPFAST
  15016 selected the authorization - AP_Lan profile
  11002 returned access RADIUS acceptance

  So the authentication and authorization is successful but he try's to resolve the user in active directory.

  I checked the authentication for MAB process, and here I see the same error.

  The MAC address of the device used to MAB also is added to the ISE, then authentication through internal users, authentication and authorization is successful, but ISE wants to solve the (MAC address of the device) user in Active Directory.

  We also see this step for the flow of EAP - TLS, and in this case the identity stage via resolution is successful.

  Is it possible that I can disable the resolution of identity through AD when the internal user group? (or in the world?)

  I did some research and found this (search for LDAP users)

  http://www.Cisco.com/en/us/docs/security/ISE/1.0/user_guide/ise10_man_id...

  When I look at our deployment, it is nothing configured under LDAP.

  If you have rules in your authorization rules that use ad groups that are in front of your MAB or the EAP-FAST rules, ISE will do a search to see if it needs to match this rule. Put your MAB and EAP-FAST rules about AD membership rules, and it won't do the research.

• Question about encryption for a VPN established between two of our sites

  We have two routers Cisco 2951, one at our main location and one at a branch.  An engineer for a local company came and worked all the parameters, including the VPN between the two men.

  For an upcoming exam, the firm wanted to know what kind of security/encryption has been implemented between the two routers.  The engineer is no longer available, so I've went over our configuration files for each of the routers and will have questions about what to tell them (I'll be the first to admit that some of this stuff is over my head).

  I enclose the portions of the configs with "crypto" information he put in place.  If you see something wrong, or need something extra, let me know.

  Thanks in advance!

  That's what you use:

  Phase 1: 3DES, SHA1, PSK, Group2 DH (1024 bits), life time 86400 s

  Phase2: 3DES, SHA1

  Which is today considered legacy crypto, but probably nothing to worry. The crypto-config has always considered that there is "room for improvement"...

• Session of endpoint on Cisco ISE 2.1

  Hello

  I installed 2.1 ISE with patch 1.

  I have a question about the session on Cisco ISE calendar.

  If a n receives an Access_Accept message for an endpoint, ISE installs a session that is visible on the Live session section.

  If endpoint disconnects from the network, which is the time-out for this session?

  Is it possible to set this timer?

  I try to put an end to the session with the CoA on Live Session Action, but this action fails because my switch does not support cost.

  So I reboot Cisco ISE and after its reloading, the session is deleted.

  In a case that it is not possible to use the feature of 'end', is it possible to delete the session in some other way?

  Thanks in advance

  Antonio

  Hi Antonio,.

  • Completed sessions are cleaned up 15 minutes after the end.
  • If there are authentication, but no accounting, these sessions are deleted after an hour.
  • All idle sessions are cleaned after seven days.

  But your n should send account opening and stop the message for the best operation.

  For the manual uninstall, you can use under method as shown in the link I pasted. You can consult the section "withdrawal embusked sessions.

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-4/api_ref_guide/API _...

  Also, you might be interested in the discussion below:

  https://communities.Cisco.com/thread/61587?start=0&TSTART=0

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• CIsco ISE with HP and Fortigate

  Hello

  I configured the switches HP 5820 X and 5130 for authentication radius AAA with Cisco ISE 2.0.0.306.

  The switch receives the response from authorization successful; but unable to connect. What are the Advanced profile Radius authorization attributes in

  ISE?

  In addition, ISE supports Fotigate firewall?

  Oh and Yes ISE supports any device using the RADIUS in accordance with rfc, it is usually only a question about this that av-pairs to send to that specific device, there is not really standard for this.